In bulk 2.0 - link activity EmailClickthrough

Similar Questions

• I would like to bring to the text from Word (and the web) which is already a hypertext link in InDesign. How can I do it while keeping the links active?

  I would like to bring to the text from Word (and the web) which is already a hypertext link in InDesign. How can I do it while keeping the links active?

  Whenever I have to copy and paste from the web or Word it removes hyperlinks.  And when I try to do in 'Place' ing a Word document in my InDesign project that it retains formatting with it, the rectangles around the text.

  I have the latest version of InDesign.

  Any help is appreciated.

  Copy-paste might not include the shaped. A regular import using square is the best way.

  The rectangles around the hyperlinks are just to indicate that they are links - they do not print, but they appear in your PDF.

  You can delete them by double clicking on the hyperlink in the hyperlinks Panel and select "Rectangle Invisible" as the type.

  In general, Word formatting of hyperlinks - blue text, underline - with a character Style. If you want to remove or change the formatting, all you have to do is to change the character style. My experience, however, is that you need to check all the hyperlinks because no reason apparent, sometimes they appear in the document without the character style.

• Link activation not valid, please login using the email associated with this activation

  Ugh, want to start the evaluation of this product and can't because of this message.  I click on the link in the email, sign in using the same credentials, I always have and get this message someone else do this message, if so some way around it other than to talk to a technical support?

  I had the same problem.

  Log out of the site.

  Click on the link «Start your free trial now»

  Choose View 4 and you connect.

  Now, click on the link "resend the email.

  A new activation email will be sent to you, that worked for me.

• In bulk API REST v2 activity Data Export 'primary key '?

  After reading the documentation, I expected that ActivityId would be the primary key when you export activity data - for example, it would not be in double ActivityID in the data returned by the export items . However, I see the exported data where I have several references to activity that are identical, except that they have different CampgainIds

  1. Is ActivityId, CampaignId the primary key for the activity data? If not, what is?
  2. When the activity with the same activity ID data has different areas (excluding CampaignId)?

  Thank you!

  Christopher Campbell-Oracle

  It is a known issue that we're working to correct.

• CSS: link, active.hover, visited

  For some reason, I can't get the css to work properly. The link is: http://www.pinnaclesites.com
  
  CSS is attached.
  
  Thank you.
  

  I'm a fool - as I paste the css code, I saw that I was missing something. I'm sorry.

• Highlighting of active link using css?

  Hi all

  I wanted to highlight the link that is active in the navigation bar for example my navigation bar is [home, user profile, contact us etc.] if I'm in the user profile, then link user profile would be highlighted. Basic knowledge I have is that you can highlight using the: active property in css, but in adf his does not work for me. I want the House as my default link active? can anyone suggest how I can achieve this?

  ago I use af:commandLink: active {...}, but its not working. even if the link is clicked top relays with old style instead of "active".

• Getting the activity of contact data?

  Hi all

  In trying to get the ProcessedActivity of database entities, I always get 0 record.

  Should be a config change to record activities?

  Moreover, in trying to get the RESTful API activities, I send requests to each contact id and each type of activity of the 8 types (emailOpen emailSend, emailClickThrough, emailSubscribe, emailUnsubscribe, formSubmit, webVisit, campaignMembership).

  But each application would expire.

  When obtaining accounts and Contacts, it works well, and records of result would be returned in a few seconds.

  So, what should I do especially for activities?

  Any suggestions?

  Thank you

  Biao

  Extraction activities in bulk via SOAP by the ProcessedActivity only works if you have the internal queue previously activated for you, and you have the activity according to the internal events that log information that him. It will store data up to 45 days. So 0 results could mean it is not enabled, your internal events are disabled (or external calls in them have been deleted) or your date range is beyond the data you have, or simply the filter on your query returns no data. You can read more here:

  The queue of activity processed (AQP)

  And here:

  Eloqua API how: retrieve data of activity through the API

  To make queries through the REST, if you get HTTP500, try again with a shorter period of time and a small page to test. If you're pulling for one year (maximum) and contacts a large number of activities, the db simply may not have able to extract the data in time. To clarify on the levels of support for REST 1.0 - product compatible will address all the problems that you encounter with him and log defects or feature requests as needed. From there on, dev may specify what level of action, we can provide on this particular workflow or an end point. REST 2.0 is not supported because it is not contractually stable and may change between versions. If the behavior/feature you need is available at REST 2.0 and 1.0 not, then certainly, you can consider using it, but it is not recommended because of this reason.

  For activity in general, exports in bulk 2.0 export activity are available. They have the advantage to be more effective than the REST, which is 1 call per contact by type of activity, and support the date more 1 year ranges. During the SOAP/QIP method, there the advantage of not requiring installation and changes to your integration area, as well as no drop of data after 45 days.

• Can I use active directory to validate users?

  Hello

  Is it possible to link Active Directory users Teststand?

  I want to do because it allows the user to use their journal same password for the PC.

  Kind regards

  Shakeel

  
  

• Remove active directory

  I have a client who has a small office (3 positions) with an old Windows 2 K Server.  It was installed years back to serve for the performance of an application that requires MS SQL server, etc..  At that time, it was also installed running active directory, dhcp, etc.

  They no longer need the server as they now run their applications online.  In addition, it server hardware problems and will die at some point.  What I have to do, is remove the server and just run basic networking (working group) to the office so they can exchange a word document, or both.  Two of the machines will be updated with the OS so this isn't a problem but one is mobile owner using speech recognition, etc. and I would like to join the Working Group, without losing files in bulk the server and Active directory.

  BTW - all the workstations in the Active directory are Win XP Pro

  (1) what measures are necessary to accomplish the back out of the server?

  (2) what they currently have their My Documents redirected to the server, but I'm sure it's just a matter of changing its properties.

  (3) a router from internal network will resume the DHCP functions.

  Your help and assistance is greatly appreciated and necessary because no one I talked to can help me in this endeavor.

  Hi DHUM,.

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 forum.

  http://social.technet.Microsoft.com/forums/en/itprovistanetworking/threads

• SX20 and link ISDN with TC6

  Hi guys,.

  I recently upgraded a SX20 and link ISDN to the new TC6 and after the upgrade, I can't make ISDN call.

  I can see and manage the ISDN link from the SX20 configuration web page, but the status of the ISDN connection is: error, SIP not saved.

  I use H323 network and I don't use SIP between SX20 and ISDN link and with the old version, I could receive and make calls. Now when I try to dial the ISDN using the new interface TC6 endpoint indicates that it does not find the ISDN link.

  Thank you for your help,

  Adrian

  Hi Adrien, Valentine's day.  Theres something happens with outgoing enabled on the link and the Codec for this, and we have two CDETS opened on them.  There are always SIP service is enabled on the Codec with link and link itself.  Codec uses IPV6 local links for the link itself.  Even if the sip xstatus on the codec has its inactive etc, the codec message still SIP REGISTER to the device registration link.  Link runs a FWD SIP process that handles the request.  Sorta like a mini SIP registrar if you want.  Codec will send the message to REGISTER using link-local IPV6 address.  Example of message is less than 200 Ok.

  77582.64 SipPacket PacketDump: Proto: SIP, name: REGISTER sip: [0000::000:0000:0000:cd39]: 15070 SIP/2.0, Direction: outgoing, RemoteAddress: [0000::000:0000:0000:cd39]: 15070, GroupEntity: b27d07c1f5f298c492db68040b320ca6, time: 77582634 content:!

  77582.64 SipPacket REGISTER sip: [0000::000:0000:0000:cd39]: 15070 SIP/2.0

  77582.64 SipPacket Via: SIP/2.0/TLS [fe80::250:60ff:fe83:c52a]: 5061 branch; = z9hG4bK45a7681a50ebbdc5b98e2f91bff6b438.1; rport

  77582.64 SipPacket Call-ID: b27d07c1f5f298c492db68040b320ca6

  77582.64 SipPacket CSeq: 47083 REGISTRY

  77582.64 SipPacket Contact:

  «': 5061; transport = tls >; + sip.instance =»

  77582.64 SipPacket of:; tag = 116a994ac2281c72

  77582.64 SipPacket to:

  77582.64 SipPacket Max-Forwards: 70

  Road to SipPacket 77582.64:

  77582.64 SipPacket allow: INVITE, ACK, CANCEL, BYE, update, INFO, OPTIONS, CONSULT, INFORM

  77582.64 SipPacket User-Agent: TANDBERG/518 (TC6.0.0.876266)

  77582.64 SipPacket expires: 3600

  77582.64 SipPacket authorization: Digest-nonce = "d9605a7da8be22af8c0e7f52b3de4a5f5125fcd3", domain = "MARCIE", qop is auth, username = "djkvvknn", uri is "sip: [0000::000:0000:0000:cd39]"

  ", response ="3b27b753cb9bcf38cc2431b767bce643", algorithm is MD5, nc = 00000002, cnonce ="84addca2a68f6c5f9b657a94653a4bae"

  77582.64 SipPacket supported: replaces, timer, 100rel, gruu, way, way out

  77582.64 SipPacket Content-Length: 0

  77582.64 SipPacket

  77582.64 SipPacket >!

  -----------------------------------------------------------------------------------------------

  77582.65 SipPacket SIP/2.0 200 OK

  77582.65 SipPacket Via: SIP/2.0/TLS [fe80::250:60ff:fe83:c52a]: 5061 branch; = z9hG4bK45a7681a50ebbdc5b98e2f91bff6b438.1; rport = 41246; receipts = 0000::000:0000:0000:c52a

  77582.65 SipPacket Call-ID: b27d07c1f5f298c492db68040b320ca6

  77582.65 SipPacket CSeq: 47083 REGISTRY

  77582.65 SipPacket of:; tag = 116a994ac2281c72

  77582.65 SipPacket to:; tag = e84d13204776ebc2

  77582.65 SipPacket server: fwd

  77582.65 SipPacket Contact:; (+ sip.instance =""

  77582.65 SipPacket Content-Length: 0

  77582.65 SipPacket

  77582.65 SipPacket >!

  -------------------------------------------------

  I removed my own addresses, so you get the picture here.

  It is the same for the link.  Link will send REGISTRY as well to himself.

  Even if your using H320 as outgoing Protocol call, messaging between the codec and the liaison unit is still SIP as the outgoing call is still SIP of the codec for the link even if you chose H320.

  You can see all happening all by running: Journal ctx sippacket debug 9 and connect the output to see the messaging back and forth between devices.  This is why the Service SIP on the codec cannot be disabled.

  The outgoing enabled on both devices and it records not as what Adrian has met is odd. So the question has been filed and is under investigation.

  CSCue57128 - SIP in a strange state connecting to link ISDN (Codec)

  CSCue73049 - outbound SIP on ISDN link activation causes lose her registration (link)

  These are new, so the visibility may not be there yet.

  If you see a problem with the link is not not able to register, check to see if outgoing SIP are enabled on the link.  If so, turn it off and start.

  Do the same on the codec as well.  Disable outgoing SIP and restart the computer.  There may be some cases, you do not see this, as the investigation continues with the bug above two ID's

  I hope this helps.

  VR

  Patrick

• The call for a process when you click the link export v4.1.1.00.23

  Version 4.1.1.00.23

  Hello

  I have 6 Classic reports on the page.

  Each report has link active Export.

  I need to insert the set of results that is questioned about the report in a table. Each report is independent of each other.

  Each report has its own table to insert the result set in.

  My thought was to call a process Page when a user has clicked on the link export, but the process is not known. I put: apex_application.g_print_success_message: = 'Insert '; in the process of the Page to tell if the process was called. I think that the process is not called because the page is not sent when the user clicks on the link to the export. It is purely a guess.

  What I tried:

  Working with just the first report, I created a page element hidden in the region of the report and created a calculation before heading for the region ID.

  SELECT region_id
  FROM   apex_application_page_regions
  WHERE  application_id = :APP_ID AND
         page_id = :APP_PAGE_ID AND
         region_name = 'My First Report Region'
  

  Then on the wording of the link for the link export in the attributes report I put:

  < a href = "f? "p = & APP_ID.:124: & SESSION.: FLOW_EXCEL_OUTPUT_R & P124_ESSCSD_REGION_ID._en - us" > Export CSV - my first data reports < /a >

  The Condition, that I used in the process of the Page is:

  Point process: submit now - after calculations and Validations

  PL/SQL -: REQUEST = FLOW_EXCEL_OUTPUT_R & P124_ESSCSD_REGION_ID._en - us

  of course, that didn't work so I tried it - "FLOW_EXCEL_OUTPUT_R" | & P124_ESSCSD_REGION_ID. | "_en - us

  and I tried it - "FLOW_EXCEL_OUTPUT_R" | : P124_ESSCSD_REGION_ID | "_en - us

  None of which worked.

  SO, can someone help me with a solution called a process to insert the data in the report, when the Export link is called?

  What information can I I provide/clarify?

  Thank you

  Joe

  Knew that I had seen cela somewhere... Try to watch this blog of Martin D: D'Souza Giffy Martin on Oracle APEX: APEX report download recorder

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• VSAN interrogator multicast with igmp snooping active requirement

  When the switch is "igmp snooping" enabled, I do not understand why VSAN Articles and book require a mrouter or interrogator to define.

  Nexus switch igmp debugs and newspapers, VSAN will send members unsolicited reports every 90 seconds at the address of the group 224.1.2.3 and 224.2.3.4. It is without worrying whether or not we have configured for VLAN mrouter or igmp snooping querier. As long as VSAN is coded so as to send the membership periodically reports, should we not there so a "questioning" on the virtual LAN to send Group/General requests.

  As in my tests, I have no igmp mrouter or defined vlan VSAN and VSAN applicant all communicate are good with igmp snooping enabled (default for NX - OS).

  DIA-N5K-02 # show ip igmp snooping-history of events vlan. I have 10.16.127.111

  2014, August 5, 21:31:46.915356 igmp [3465]: [3917]: SN: < 127 > v2 received report: Group 10.16.127.111 on Eth1/21 224.2.3.4

  2014, August 5, 21:31:46.915011 igmp [3465]: [3917]: SN: < 127 > v2 received report: group 224.1.2.3 10.16.127.111 on Eth1/21

  2014, August 5, 21:30:17.037868 igmp [3465]: [3917]: SN: < 127 > v2 received report: Group 10.16.127.111 on Eth1/21 224.2.3.4

  2014, August 5, 21:30:17.037606 igmp [3465]: [3917]: SN: < 127 > v2 received report: group 224.1.2.3 10.16.127.111 on Eth1/21

  2014, August 5, 21:28:46.950748 igmp [3465]: [3917]: SN: < 127 > v2 received report: Group 10.16.127.111 on Eth1/21 224.2.3.4

  2014, August 5, 21:28:46.950273 igmp [3465]: [3917]: SN: < 127 > v2 received report: group 224.1.2.3 10.16.127.111 on Eth1/21

  2014, August 5, 21:27:17.073420 igmp [3465]: [3917]: SN: < 127 > v2 received report: Group 10.16.127.111 on Eth1/21 224.2.3.4

  2014, August 5, 21:27:17.073042 igmp [3465]: [3917]: SN: < 127 > v2 received report: group 224.1.2.3 10.16.127.111 on Eth1/21

  2014, August 5, 21:25:46.985909 igmp [3465]: [3917]: SN: < 127 > v2 received report: Group 10.16.127.111 on Eth1/21 224.2.3.4

  DIA-N5K-02 # show ip igmp snooping vlan 127

  IGMP Snooping information vlan 127

  IGMP snooping active

  Search mode: IP

  Optimized multicast Flood (OMF) disabled

  Applicant IGMP no

  Switch-interrogator disabled

  Tracking explicit IGMPv3 is enabled

  IGMPv2 leave quickly disabled

  Delete report IGMPv1/v2 on

  Disabled removal of IGMPv3 report

  Removing local groups link activated

  Detection of router port using PIM Hello, queries IGMP

  Number of ports in the router: 1

  Number of groups: 2

  Function of vPC VLAN enabled

  Active ports:

  Eth1/21 Eth1/22 Eth1/23 Eth1/27

  Ros

  DIA-N5K-02 # show ip igmp snooping groups vlan 127

  Type: S - static, D - dynamic, R - port of the router, F - Fabricpath base port

  Group VLAN address worm Type port

  127   */*                -    R     Po1

  127 224.1.2.3 v2 D Eth1/22 Eth1/21 Eth1/23

  Eth1/27

  127 224.2.3.4 v2 D Eth1/21 Eth1/22 Eth1/27

  Eth1/23

  We found that for some providers of network switch, an interrogator is required when you enable IGMP snooping. If espionage works without an interrogator for your specific provider, then this is ideal. In all cases, we recommend that you consult your provider for their specific recommended configuration of switch of layer 2 multicast switch.

• Active AF:commandLink: hover &amp; CSS does not work

  Hello
  
  I use JDeveloper 11.1.1.6
  
  My script is required to change the color in < af:commandLink > at this time active. I tried CSS styles below,
  
  + af | commandLink: active {+
  background-color: #7FFFD4.
  +}+
  
  + af | commandLink: hover {+
  background-color: #FFCCFF;
  +}+
  
  But it does not work. I followed this URL http://jdevadf.oracle.com/adf-richclient-demo/faces/components/skinningKeys/commandLink.jspx .

  Hi David,

  Looking for probably

  af|commandLink:link:active
  {
    color: Aqua;
  }
  

  Here are the other selectors

  af|commandLink:active
  af|commandLink:busy
  af|commandLink:disabled
  af|commandLink:hover
  af|commandLink:inline-selectable
  af|commandLink:inline-selected
  af|commandLink:link:active
  af|commandLink:visited
  

  See here: http://jdevadf.oracle.com/adf-richclient-demo/docs/skin-selectors.html

  Kind regards

  Lalit

• Animate the edge - how to steal in hover and active effect in CSS?

  Hello

  I face some problem by adding the hover/active effect in css.

  To get examples-, I have two button text - (home & about us)

  I would like to add that, when I hover over the button, it will show underscore, features when click on it, it will be active with different colors

  and when I click on the button active anther button should be Michael & clicked button should be active.

  Help, please...

  Concerning

  E. Kumar Muduli

  Hello

  The best way to achieve this would be to specify properties with code, because there is no transition animation you are looking for.

  Start by opening edge animate and make two text fields at the 'home' and 'about '. Then name the text fields with a

  ID by changing the name in the properties panel. Click in the top text box and change the name

  ID to something that is easy to identify. I chose "homeText":

  

  Repeat this step for the "comments" text field. Then, click the Actions open next to your House text field object in the timeline area:

  

  Choose 'click' in the popup menu that appears:

  

  Copy and paste this code below (it's the code style CSS color property). Be sure to change 'homeText"that you chose to call the House text field object:

  SYM. $("homeText") .css ("color", "#650097");

  SYM. $("aboutText") .css ("color", "#000");

  

  In this example, I made the #650097 Home-link active color (purple). This code shows on board animate to the purple Home link and to make sure that the link is black by default (#000).

  Then click on the button "+" in the Actions window open. This time, choose "mouseover". This is where we will add the code for the feature of sensitives.

  

  Copy and paste the following code in the code window:

  SYM. $("homeText") .css ("text-decoration", "underline");

  Finally, press the "+" to add an event in addition to the buton. This time, choose "mouseout/mouseouthandler()". This code will add the button functionality to make the underlining disappears once the user is no longer hovering above it. Copy and past the following code in the window code:

  SYM. $("homeText") .css ("text-decoration', 'none'");

  Repeat these steps for the aboutText button. The code for the about button is below.

  Click on:

  SYM. $("aboutText") .css ("color", "#650097");

  SYM. $("homeText") .css ("color", "#000");

  MouseOver:

  SYM. $("aboutText") .css ("text-decoration", "underline");

  Mouseout/mouseouthandler():

  SYM. $("aboutText") .css ("text-decoration', 'none'");

  If you need further clarification / statement, let me know. I hope this helps!

• Colors different link in Dreamweaver

  I know this is very basic, but I've never done it before and can't seem to make it work. How to make two different colors of link/active/hover/visited on one page? This is what I have in my css file... is that correct? Now how to apply? I just need the footer links to be a different link color but the same hover. Any help is appreciated!

  }

  a: link {}

  text-decoration: none;

  Color: #333333;

  }

  a: visited {}

  text-decoration: none;

  }

  a: hover {}

  text-decoration: none;

  color: #00928f;

  }

  a: active {}

  text-decoration: none;

  }

  {.footer:link}

  color: #FFFFFF;

  }

  {.footer:hover}

  color: #00928f;

  }

  See if this tutorial helps you

  http://www.Projectseven.com/Tutorials/CSS/Pseudoclasses/

  In short, describe all your link for each group of links and use descendant selectors:

  Footer links are defined by the class first, then the status of the connection

  In the last two rules in your post, the principle is good, but the syntax is wrong.

  .footer a: link = link not visited within an HTML element where class = 'footer '.

  So set them as follows:

  .footer a: link {}

  color: #FFFFFF;

  }

  .footer a: visited {}

  text-decoration: none;

  }

  .footer a: hover {}

  color: #00928f;

  }

  .footer a: active {}

  text-decoration: none;

  }