In CVI 2010/MAX 5.0, there is a file where instrument alias can be stored and used during new configuration station warns we Setup manual Alias?

Similar Questions

• Hello.. I'm from the programming, but new to actionscript. I would like to ask if there was a library where all built in functions, methods, and events can be searched. As for VB, MSDN (of Microsoft Developer Network) used to be there. More than once it h

  Hello.. I'm from the programming, but new to actionscript. I would like to ask if there was a library where all built in functions, methods, and events can be searched. As for VB, MSDN (of Microsoft Developer Network) used to be there. More than once it happens that I write a few lines of code, but a built-in function already exists for the same thing. Is there a way to check it out ahead of time?

  An online resource are QAnywhere® to Adobe ActionScript 3 (AS3)

• I just installed the trail of Lightroom version, but every time I open a tab pops up saying: 'there was an error internal. What can I do? I'm new on this

  This is what appears whenever I open it. I would be very grateful if someone could help me solve this problem.

  Hi FioMio,

  See the error you posted in screenshot when Lightroom can't access the Adobe folder in ~/Library and / library

  Please make sure that you have added all the users by clicking on the bottom right "+" in permissions in my previous post.

  > Go to/Library/Application Support / Adobe / Lightroom and manually create all folders that he said that he could not create

  > Other repair permissions using the disk utility

  Choose go > utilities.

  Double-click disk utility.

  Select the volume in the left pane for which you want to repair the permissions.

  Click the first aid tab.

  Select the volume that you want to install the Adobe application and then click on repair disk permissions.

  Hope that helps

  Assani

• Where can I find Firefox 7.0 to install? Is there a link maintained where all the firefox releases are available for users

  Hello team,

  Is there a link maintained where all the release of firefox and its patch are available for users to download & install

  You can get Firefox 7 here

  • http://releases.Mozilla.org/pub/mozilla.org/Firefox/releases/7.0.1/

  BUIT its recommended to use Firefox 8

• PC/tablet-is there a laboratory touchscreen top that works on windows 7 / 8, where the screen can detach the keyboard to use in the form of tablets, or screen can be reached for keyboard vertically or horizontally?

  Labtop / Tablet question -I'm shopping for a new Labtop.    Is there a laboratory touchscreen top that works on windows 7 / 8, where the screen can detach the keyboard used in the form of tablets and then transformed (with long vertical side) and attached to the keyboard to type a length full page (8.5 x 11 page) and then returned (long horizontal side) one attached to the keyboard (to be used as a stand) for a movie with all the features of present characteristics of a top laboratory such as 4 to 8 GB memory and a 500 GB hard drive (perhaps as part of the screen or connected to / through the keyboard, if it is used as a docking station)?

  It seems with all the technology of the tablet on the market that Microsoft or somebody would do something like that now.  Can someone help me? Thank you

  -Scott M

  PS: My wife has an ASUS transformer where the screen detaches from the keyboard, so it can be used in the form of tablets.  When it is attached to the keyboard, the keyboard acts as a stand to sit on the counter for watching movies.  And then the keyboard and the screen can fold them together, so when it is closed there is a stand-alone case. This, however, runs the Android operating system.  Basically, I want this same design (for the potability in a Briefcase), but with it running Microsoft Windows so it can be used as any other labtop.  It the keyboard could have a number pad are associated with, that would be a bonus.

  Hi pr-e-s,.

  You can check with asus.

  http://us.Acer.com/AC/en/us/content/home

  http://us.Acer.com/AC/en/us/content/group/notebooks

  http://us.Acer.com/AC/en/us/content/group/notebooks

• The CVI 2010 SP1 download link works?

  The downloaded file from SP1 link seems to be the unserviced pack version. After the 'install' which took place much too quickly, the help > about shows LW/CVI 2010 Version 10.0.0 (360). Am I missing something or am I just too early?

  Hello

  There has recently been some changes made to the experience of downloading on ni.com.  To get the latest download for the ICB, please visit ni.com/downloads.  There you should find the LabWindows/CVI 2010 SP1 download.

  Let me know if you have any problems,

  NickB

  National Instruments

• "Mesa.dll is not found" from CVI 2010 installation

  When I launch an executable file that has been installed from a distribution kit created with CVI 2010 (360), I get the message "Mesa.dll is not found." But I do not see that the file is installed in C:\Program NIUninstaller Instruments\Shared\Mesa.  If I replace this file with a mesa.dll more than a previous version of the CVI, my newly installed executable launches properly.

  Hi mrtqs,

  While testing on this issue, I came across a similar problem.  From my understanding, the CVI Run - Time Engine will also install of VS 2008 C++ Runtime parts.  According to that the CVI Run Time options you choose to install a different part of the runtime C++ 2008 VS will be included in the installation.  It seems that Microsoft has been able to modify the runtime C++ VS 2008 for some parts, but not others, which is what causes the problem.  As a result, there are a few options:

  1. install the runtime full CVI with default settings

  2 leave out the ActiveX module if does not necessary

  3. install the runtime C++ 2008 VS separately on the deployment computer.

• CVI 2010 events in operating Mode of the UIR and Edit-> Diff questions

  Hi all

  I started to use the 2010 CVI almost immediately after its release and I find that two of the features of the old version that I use regularly are missing or have changed and I don't know where they are:

  1 file UIR - in operation, I used to be able to see events generated by clicking on a control.  These appear in the right top bar "button" at the top of the screen.  This was very helpful to understand the generation of event for controls.  I use it all the time, but I need it now because I'm trying to set up a table so that the user select one line at a time and I don't see what events are generated by clicking on the header row or cell.

  2. When you do a diff (Edit-> Diff with) on both issues, there is a key combination that allowed me to find the following difference between the files.  It is gone so now I have to use the menu every time I want to get to the next area of the files that is different.  I can do this, but it's much much more time than to use shortcut keys.

  Thank you

  Judy

  Don't know why this shortcut key is not present in your IDE. It is not in my CVI2009 too!

  In all cases, the shortcut keys can be edited and modified/reassigned using the Options > change Shortcut Keys... menu item. The function will appear a list of operations thyat can be assigned to an effective shortcut with assignment key: each element can be edited and assigned to a key combination that you want to call it. The lists also available without useful keys in case you want to add an accelerator to the functions which were not attributed the any of them.

  

• Other fonts "NIDialog" when the current CVI 2010 programm after 2012 runtime is installed

  I noticed a change in police during execution of a program of CVI 2012 meadow with runtime 2012.

  She seems to be the police "NIDialog", unless it is "NIDialogMeta".

  The user interface looks like it should when editing it in CVI 2010.

  Is - is this expected?

  There are UI editing type of a bet...

  Yes, you are right. It seems that the font that matches the dialog box OR changed in 2012 of the CVI. It's something that should have been called explicitly in the readme file, and I apologize for this oversight.

  OR dialog is, by design, a "variable police." This means that it is a policy that can match different fonts in differect computers because it is linked to an alias (DEFAULT_GUI_FONT) that resolves to different real fonts in different computers, operating systems different and potentially (as here) different versions of the CVI runtime. What has happened in this case, is that a bug has been fixed in CVI 2012 that ICB previously did take into account the Microsoft font substitution table:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\FontSubstitutes

  Going back several years now, DEFAULT_GUI_FONT corresponded to MS Shell Dlg. It seems to me that MS Shell Dlg is a bit outdated and so it has in the FontSubstitutes table above, as well as applications to replace it with something else. In my PC, which becomes "Microsoft Sans Serif". Before CVI 2012, it has been incorrectly not replaced with Microsoft Sans Serif, whereas it is now.

  Sorry about that.

  Luis

  NEITHER

• How can I convert a LabWindows/CVI 2010 project to a Visual Studio 2011 project?

  I have a good size project, 12 source files, headers 14, 1 uir, I want to be able to edit and compile in MS Visual Studio 2011, MSVC ++.

  I remember that we tell him that LabWindows dropped support for C++ in 2008 and is more had a wizard to convert projects. I know that I can follow the path of the DLL, but I have never created a DLL before and don't know where to start with it. What would be the best way to go about this conversion?

  CVI 2010 always supports the Assistant Conversion of Visual Studio to Visual Studio 2005/2008. We are not planning to add support for VS 2010 in a later version.

  If you need a project to VS 2010 now, you can use the Visual Studio 2008 conversion wizard, and then upgrade the project VS 2008 for VS 2010.

• Use Oracle oci in CVI 2010

  Does anyone have experience using Oracle oci in CVI 2010 on Windows 7? Should I install 64-bit or 32-bit Oracle Instant Client? It is sufficient to compile the program that accesses Oracle data, do I need to have the Oracle database and the ODBC Manager put in place?

  Marg SZ wrote:

  Does anyone have experience using Oracle oci in CVI 2010 on Windows 7? Should I install 64-bit or 32-bit Oracle Instant Client? It is sufficient to compile the program that accesses Oracle data, do I need to have the Oracle database and the ODBC Manager put in place?

  you didn't have to buy the Toolbox, even think it makes your job easier

  http://orclib.sourceforge.NET/

  http://www.orafaq.com/wiki/Oracle_Call_Interfaces

• _WIN32_IE different value in 2009 of the CVI and CVI 2010

  Hello everyone, I have a special problem, that I have not experienced before. I hope that I'm not the first person to deal with this problem...

  I have a code written and properly compiled in 2009 CVI source and just trying to compile it in CVI 2010 as it is, until I make my changes. The problem is that, in 2010, the NM_CUSTOMDRAW defined in CommCtrl.h (and other things used in the source code) (see below) is not found by the pre-procesor because _WIN32_IE value is not the same as in 2009 of the CVI. I wonder if this _WIN32_IE is set by the compiler itself. I tried to change it in the Build-> Configuration-> Manage configuration-> Edit-> Build options-> compiler sets by adding the /D_WIN32_IE sentence = 0 x 0300, but then the compiler says "ilegal expresion" at the first time, it takes the value _WIN32_IE in ShellAPI.h. I have the same error in compilation for 64 and 32.

  Suggestions please!

  CommCtrl.h

  ...

  #if (_WIN32_IE > = 0 x 0300)
  #define NM_CUSTOMDRAW (NM_FIRST-12)

  ...

  Josete Hello,

  Which is the line which gives you errors? Is it in your code or in a headder file? NM_CUSTOMDRAW use in your code?

  / D_WIN32_IE = 0 x 0300 in the compiler sets should work. What is the line that gives you an error in ShellAPI.h?

  Could you please list the headers you include in a file that gives you an error.

  To understand how the preprocessor directives are expanded, you can use the menu Options-> pre-treatment of Source files from a window of the source editor.

  Constantin

• Cannot compile the project in CVI 2009 which were previously opened in CVI 2010

  This was extremely irrititating and does not know what the devil.  I have a computer with CVI 2010 and separated with CVI 2009.

  I have a project and the CWS, which was established in 2009.

  I opened and recompiled in CVI 2010 things since then, ensuring that I saved my .uir file in a CVI 2009 version or earlier.

  I usually open the file .prj or .cws on my computer of CVI 2009, but trying to compile and run in debug mode, all of the CVI crashes.  How can I recompile and work with it on my computer of CVI 2009?

  Am I missing something here?  Tehre are no error, warnings or reports of incidents, CVI righteous acts as I hit Alt + F4

  
  

• LabWindows CVI 2010 and GetProcessAddress()

  I use v10.0.1 Labwindows CVI 2010 after the upgrade to version 2010 CVI v10.0.0. After the upgrade, I have a compilation error of a statement that compiles fine in the previous version. The error is:

  «= Operands are types illegal "pointer to __stdcall int function (int, pointer to char, char pointer, pointer to char, int, pointer to char, pointer to char)' and"FARPROC".»

  What causes this error is the following statement in the code:

  my_FP = GetProcAddress (dll_handle, "DLL_FUNCT");

  and the definition of my_FP is:

  int __stdcall (* my_FP) (int x, y of char [], char [z], char * m, int g, char A [], char [] B);

  (the parameters and the function names have been changed for simplicity)

  As I said, this line compiles fine in the 10.0.0, version but not in 10.0.1. Y at - it a specific update to the compiler that will cause this error? What can be done to fix this?

  I thank very you much for your time and your help.

  You are right. This was caused by a change in the SDK Windows CVI headers that took place in the 2010 SP1 version. The change has been associated with bug fix #275934. Unfortunately, this bug fix introduced this unwanted side effect to require a cast for any function that returns a function (such as GetProcAddress) FARPROC poinrter. On reflection, this side effect is unacceptable and needs to be fixed in the next version. This is followed internally with bug ID #336341.

  I'm really sorry for this inconvenience. Until the problem is solved using the typedef & cast you have already implemented is a valid alternative.

  Another solution, if you're worried about other projects or other functions, where this error can also appear, is to edit CVI2010\sdk\include\windef.h and replace the following definitions of FARPROC (line 226 and 230, respectively):

  typedef INT_PTR (away from WINAPI * FARPROC) (void);

  typedef int (away from WINAPI * FARPROC) (void);

  with:

  typedef INT_PTR (away from WINAPI * FARPROC) ();

  typedef int (away from WINAPI * FARPROC) ();

  This will avoid the problem throughout a facility given to the CVI.

  Luis

  NEITHER

• Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new downlo

  Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new download does not work. Help, please!

  Please try and delete preview Cache.

  It is located in the same folder as the catalog in Lightroom. The name of the cache an extract ends with Previews.LRDATA and should be deleted. Not to be confused with *. LRCAT, which should not be deleted

  Default location should folder of the image.

  Kind regards

  ~ Mohit