MacBook pro won't start - start progress 99% and stops

Similar Questions

• In early 2011, MacBook Pro won't start

  In early 2011, MacBook Pro won't start

  Is-ti connected? Fully charged?

  Give us some facts!

• Mid-2015 MacBook Pro won't start every 2 weeks, need to restore from a backup.

  Hello all, big problem, Apple says that it is not material (although I'm not sure), but if not, then there must be some sort of conflict between my installed software and the new model of MacBook Pro mid-2015. Help!

  The problem here is that I've been running EXACTLY the same configuration on a MacBook Pro 2012 since, well, 2012, without any problem. But when I received the new machine in December, I migrated everything on (using Migration Assistant), I have installed a Bootcamp partition, migrated my old installation of Windows on the use of WinClone, and everything was fine for about 2 weeks. This is the same process as I did when I upgraded the machine from 2009 to 2012 also machine well.

  Suddenly one day, starting from Windows to Mac OS, I watched the progress bar filling, then stop, then the screen went black. No sound, nothing. I hit the power button and the same sequence. Progress bar about 3/4 of way filled, on the screen then black, then the unit turns off.

  I called Apple, went to two Apple stores, and we all tried to run disk utility to fix the problem. But every time I find myself with a message "Invalid node structure. The volume could not be completely checked. File system check exit code 8. Updated scores of start-up of the volume as required. File system check or repair a failure. Operation failed... "The topic on this bed,"first aid process has failed, if possible, back up the data on this volume. »

  The idea of first re - install the operating system didn't work... apparently there was a problem with the volume at this point so he would not restore. The next option was to completely erase the partition and then restore the backup. That worked, but then the entire process repeated two weeks later.

  I have been through this process 7 ~ 8 times since December! It seems to happen every two weeks and no one can tell me why it's happening on this new machine, but I have NOT had the problem on the old machine running the same configuration.

  
  

  Apple said it might have something to do with execution Tuxera NTFS on Mac (if I can share documents across side Windows). I have not removed... Tuxera two restorations there is no change.

  I also use Paragon HFS + for Windows, because most of my material is actually stored on the Mac side. I have NOT yet removed this (current running Windows 10) because I have NO idea why or how something running on the Windows side could affect the operating system volume on the side of Mac... especially when everything I do is opening and closing things as Word documents.

  I have log files and screenshots (I write below a few... but there are many others). Apple says "it is not a hardware problem" so they won't have to help understand if it's just software. I beg the community to help!

  Here's what I new material:

  MacBook Pro (retina, 15 inch, mid-2015)

  Intel Core i7 2.8 GHz

  16 GB 1600 MHz DDR3

  AMD Radeon R9 M370X 2048 MB

  This graphics card is the NEW one, first, that I do business with AMD

  My OLD machine is:

  MacBook Pro (15-inch, mid-2012)

  Intel Core i7 2.7 GHz

  16 GB 1600 MHz DDR3

  Intel HD Graphics 4000 1536 MB

  Any help or ideas are appreciated!

  

  Suddenly one day, starting from Windows to Mac OS, I watched the progress bar filling, then stop, then the screen went black. No sound, nothing. I hit the power button and the same sequence. Progress bar about 3/4 of way filled, on the screen then black, then the unit turns off.

  This occurs when the drive Boot CAN get the initial Blob of the software off the drive with the boot loader, but when he tried to mount the disk with the file system, it can not be mounted. It runs a single past of [essential] disk first aid. If the drive cannot be mounted, your Mac can not do something useful, he died.

  If the problem could not be fixed quickly, you should have been advised to REPLACE this hard drive.

  This is what you need to do now and stop wasting your time. A new drive costs less than $ 100 and will solve your problems.

• MacBook Pro won't start not

  Hello

  I have a MacBook Pro that, if I'm not mistaken that I bought in 2009. So, last week I had several open files and I was typing on a Word document, I typed whenever he got more lag. Then my laptop just turned off automatically and I received a message (I don't remember very well what it read) and after that I tried to turn it on again, the start bar just loaded up to half, he stayed there for 10 minutes, then the computer is turned off again. Help, I can't lose the files that I had in this computer. What should I do?

  Thanks for your help.

  Try SMC and NVRAM resets:

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  Try a safe boot:

  https://support.Apple.com/en-us/HT201262

  If no success, using the original installation CD and see if you can start the MBP.

  If you can, after the language selection, the display should have a top menu bar.  Click on UTILITIES and select and run disk utility > first aid.  If the disk cannot be repaired, a new will be necessary.

  If you cannot start with the installation diskettes, make an appointment at an Apple store genius bar for a FREE evaluation.

  Ciao.

• Beginning of 2011 that MacBook Pro won't start, watch display rose with logo

  

  Hi, my macbook froze, out of the blue, this morning, and I was unable to turn off normally so I forced a strong power down by pressing the power button until it is turned off. Since then, whenever I try to turn it on, it is pink and the display is fragmented and lines crossing (see photo) and the progress bar does not go to Midway. On a few attempts, he went from the brand halfway on the progress bar on a white screen.  I tried:

  -reset the NVRAM

  (which caused his startup rose once again, but she suddenly turn into a blue screen United, but I ended up forcing a power down again after that stayed turned blue for 10 + minutes).

  -a secure start

  (she who seems to do nothing simply creates the macbook to initialize rose as mentioned above.)

  -a SMC reset

  (what could start the startup system rose, but then switch to a black screen after the mark halfway on the progress bar).

  Annoyingly enough, my macbook is nearly a year out of applecare. Is there a solution that you guys may be familiar with? However, I have some files on the hard drive that I just can't lose, so I don't want to do anything to jeopardize the files.

  (which does absolutely nothing, the screen is initializing ink

  Please disregard the last line "(qui absolument does nothing...)" "that has been a typo

• MacBook Pro won't start - runs in a loop

  Hi guys,.

  After a few days trying to figure this painful problem, I am at the end of my home and hope someone can help.

  I have a 2011 MacBook Pro, which has recently started having problems to start. During a game session (SIMMS), he all of a sudden to stop and refused to restart, and since then I have been unable to use it at all. The MBP has a new installation of El Capitan on it, but it has been working well for the past two weeks since the installation.

  I tried the safe mode, mode of recovery etc, but it would not boot in any of these either. Finally, I put it target mode and reloaded El Capitan of another 'companion' MacBook Pro. This process went smoothly.

  After loading it, I started from the MacBook to make sure that the operating system works OK, and it was 'companion '!

  I restarted the "Companion" MBP and ejected the defective MBP and tried to restart it normally. No go, would not even boot even with the new OS.

  I tried a number of things so he can begin as a result of this new facility, but all that happens is that he'll do the Apple Logo, try to start, stop, and then go around in circles.

  Finally you will stop on the gray screen and the fans will start and keep running.

  I'm at the end of my knowledge, so any advice would be welcome!

  Thank you

  Have you tried SMC and NVRAM resets?

• My MacBook Pro won't start after update to El Capitan, how can I go back?

  Hello

  I really hope that someone can help me here. I've updated to El Capitan Yosemite yesterday through software update, but now when I start the computer I get "no entry" or sign a circle with a diagonal line through it, or the Apple with the progress bar / error message / black screen and it repeats 3 times then stops.

  I'mnot you know where my disk of Mac OS x is so ideally don't want to reinstall the whole system.

  I did a back up of my work using Time Machine before saving, so I hope that I have most of the things I need backup.

  Restart by pressing cmd - R after the tone. It should boot into Recovery. From there, use disk to check/repair disk utility. Quit disk utility and reinstall OS X.

  The circle with a slash through it means that it does not find the necessary boot files.

• 2009 macbook pro won't start, stay asleep

  I closed the macbook in the middle of a game of solitaire.  I came back in 5 minutes and it opens to a black screen.  It will awaken no sleep, regardless of the keys on which I rely on.  I sometimes hear a hum.  Please help - I need this for a presentation Monday.  Thank you!

  The closing force pressing the power button for about 10 seconds. Reboot and see if everything is normal.

• MacBook Pro does not start safe mode or recovery mode without start up

  I use my MacBook Pro almost daily for several months now, and all of a sudden I stopped and start it up to a kernel panic (so it seems) who never lets me start normally, safe mode is a nothing helps. Recovery mode does not start, and when I try to use an external drive usb in the selection of drive it will appear. I don't know what to do more and I'm stuck. I'm not able to get in all the menus, so all I have is these pictures of panic before it restarts. Post picture soon submit iPhone photo.

  

• help my macbook pro retina 13inch started itself and turned off while in the case

  as the title, my Macbook pro retina (bought in 2014) is transformed and then turn off 5 minutes later while in his case today, I only noticed after reviewing the event log and seeing a start and stop.  How can this happen? the Mac was definitely off not asleep and I did not put a timer.

  It is unusual for a Mac to act this way, but this is not the first time that I heard about what's going on.

  It looks like a problem SMC and is easily fixed by a reset see here reset management system (SCM) controller on your Mac - Apple Support this will most likely solve the problem.

  If this isn't the case, then it could be a simple sticky switch?

  A visit to a Genius Bar is perhaps a good idea if the SMC reset does not work for you, and a new OSX installation did not help.

• MacBook Pro won't sleep

  Since the update of my MacBook Pro to El Capitan, the sleep function has stopped working. The screensaver comes into play as it always has, but he just continues to run unless the laptop is closed. Energy saving: sleep display is set for 10 minutes. The computer sleep is set for 15 minutes. I checked the activity monitor for all apps that might interfere with the sleep function (see a 'yes' in the preventive action of sleep column). There are not. I believe that I can reset the SMC, but thought I would inquire about the community before doing this.

  Thank you

  -gf

  Gregory Frost wrote:

  Since the update of my MacBook Pro to El Capitan, the sleep function has stopped working. The screensaver comes into play as it always has, but he just continues to run unless the laptop is closed. Energy saving: sleep display is set for 10 minutes. The computer sleep is set for 15 minutes. I checked the activity monitor for all apps that might interfere with the sleep function (see a 'yes' in the preventive action of sleep column). There are not. I believe that I can reset the SMC, but thought I would inquire about the community before doing this.

  Thank you

  -gf

  By all means to reset the SMC

  reset the SMC http://support.apple.com/kb/ht3964

• Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  What specific mouse?

• I have a model end of 2013 13 MacBook Pro with 4 GB or RAM retina and think to upgrade to El Capitan. Is this enough RAM

  I have a model end of 2013 13 MacBook Pro with 4 GB or RAM retina and think to upgrade to El Capitan. Is this enough RAM

  Of course you can upgrade to El Capitan. But I think better if you can change the internal hard drive (SATA drive) in the SSD drive. You will get better results, faster than still, you only have 4 GB. This is mine... MacBook pro in early 2011.

  

• Hello, I have sold my iMac and changed to macbook pro. now I wanted to install lightroom and it says that I have to disable my other license. the problem is my iMac, I sold. any ideas please? Thank you

  Hello, I have sold my iMac and changed to macbook pro. now I wanted to install lightroom and it says that I have to disable my other license. the problem is my iMac, I sold. any ideas please? Thank you

  Recommend contacting customer service

  *Remember to stay signed with your Adobe ID ( email id used to purchase the subscription ) before accessing the link above*.

  Select the exact options indicated below in the capture to get support of screen options:

  
  

• I have adobe CS3 installed on macbook pro, but he said that the license has stopped working... I then went to your website and he advised me to download the license recovery application, which I did, but then when I tried to run this app, it then came wi

  I have adobe CS3 installed on macbook pro, but he said that the license has stopped working... I then went to your website and he advised me to download the recovery of license application, I did, but then when I tried to run this app, it then came with the recovery of the license was not based... How can I get my CS3 works again?  Thank you, Glenn

  Hello

  Please check the help below documents depending on your operating system:

  Error: "License has stopped working". Windows

  Error "Licensing has stopped working". Mac OS

  Hope that helps!

  Kind regards

  Sheena