In Essbase studio network error
Hi allI installed Hyperion 11.1.2 in my machine... When I had installed in my machine, my machine IP address was say 198.456.789.101, but now it has been changed to 198.456.789.121 due to which I am not able to connect to a Hyperion product. Its saying "network error." Can someone please suggest all my machine configurations to be compatible with the new IP address. I can't change my IP address also.
Thanks in advance!
Lolita
Have you taken an XML backup of the complete catalogue of Studio? If yes then you should be fine
Also back up the database relational Studio where you must try and fall back on using that.
See you soon
John
http://John-Goodwin.blogspot.com/
Tags: Business Intelligence
Similar Questions
-
Essbase Studio Configuration error
Hello
I installed 11.1.2.3 on a Windows 2003 vritualbox image using Oracle Express as a DB... Everything works well except the Essbase studio service stops after 10 seconds.
- My diagnostic reports is unique back red section follows:
Validate the connection to the server of Essbase Studio
Error: The network communication with the server failed. Check your network connection and try again.
Recommended action: start the application.
- My server.log (E:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\EssbaseStudio\server.log) shows the following message:
[2014 01-25 T 19: 48:04.980 + 01:00] [hyperion] [NOTIFICATION] [] [com.hyperion.cp.config] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.config.RegistryManager] [SRC_METHOD: getProperties] configuration of server Studio properties are extracted from the register of the Oracle.
[2014 01-25 T 19: 48:05.089 + 01:00] [hyperion] [NOTIFICATION] [] [com.hyperion.cp.config] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.config.PropertyManager] [SRC_METHOD: loadProperties] server configuration file: E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\server.properties.
[2014 01-25 T 19: 48:05.136 + 01:00] [hyperion] [NOTIFICATION] [ESSSTD-183054] [com.hyperion.cp.server] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] Logger configuration file: E:\Oracle\Middleware\user_projects\epmsystem1\BPMS\bin\logging.xml.
[2014 01-25 T 19: 48:05.136 + 01:00] [hyperion] [NOTIFICATION] [ESSSTD-183044] [com.hyperion.cp.server] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] switch.
[2014 01-25 T 19: 48:05.136 + 01:00] [hyperion] [NOTIFICATION] [ESSSTD-183045] [com.hyperion.cp.server] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] Oracle Essbase Studio Server. The version 11.1.2.3.000, Build 4386, March 26, 2013. Copyright © 2008-2013, Oracle. All rights reserved
[2014 01-25 T 19: 48:06.636 + 01:00] [EPMAUDITCLIENT] [NOTIFICATION] [EPMAUDClient-11002] [oracle. EPMAUDITCLIENT] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] wrong enable state of the customer
[2014 01-25 T 19: 48:06.667 + 01:00] [EPMAUDITCLIENT] [NOTIFICATION] [EPMAUDClient-11000] [oracle. EPMAUDITCLIENT] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] Audit Client has been created for the product HUB - 11.1.2.0
[2014 01-25 T 19: 48:20.480 + 01:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] could not load the driver for sap.
[2014 01-25 T 19: 48:20.480 + 01:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] could not load the driver for teradata.
[2014 01-25 T 19: 48:20.480 + 01:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] could not load the driver for netezza.
[2014 01-25 T 19: 48:21.183 + 01:00] [hyperion] [ERROR] [ESSSTD-043002] [com.hyperion.cp.catalog] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.catalog.Catalog] [SRC_METHOD: initialize] Catalog.CannotInitializeStorage = Cannot initialize catalog storage. Make sure that the server.properties file contains the correct information. [[
com.hyperion.cp.catalog.exceptions.CatalogInitializationException: catalog. CatalogInitializationException.StorageInitializationFailure
at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:252)
at com.hyperion.cp.catalog.transaction.TransactionManager.initialize(TransactionManager.java:64)
at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:106)
at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:198)
to com.hyperion.cp.catalog.Catalog. < clinit > (Catalog.java:81)
at java.lang.Class.forName0 (Native Method)
at java.lang.Class.forName(Class.java:169)
at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:71)
to com.hyperion.cp.server.RequestListener$ SystemTask.run (RequestListener.java:1507)
at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:233)
at com.hyperion.cp.server.RequestListener.init(RequestListener.java:174)
at com.hyperion.cp.server.ServerMain.initServer(ServerMain.java:214)
at com.hyperion.cp.server.ServerMain.main(ServerMain.java:296)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:246)
... 12 more
Caused by: com.hyperion.cp.catalog.exceptions.CatalogInitializationException: the database 'SYSTEM' does not contain the tables in the catalogue of Studio. Please check the value of the "catalog.db" parameter in the server.properties file.
at com.hyperion.cp.catalog.storage.StorageEngine.validateSignature(StorageEngine.java:151)
to com.hyperion.cp.catalog.storage.StorageEngine. < init > (StorageEngine.java:95)
at com.hyperion
- If I watch the server.properties for Studio (E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\server.properties) file then it is empty, except a headerline saying enties here are used to override the settings?
- I rerun the EPM system configurator, but that made no difference.
Anyone have any idea that I could do to fix this?
Thanks in advance
Erik
In 11.1.2.3 the server.properties moved into the registry:
11.1.2.3 version, Essbase Studio following server properties are stored in the registry of Oracle Hyperion Shared Services:
- server.css.URL
- Catalog.URL
- Catalog.Password
- server.httpPort
- Catalog.UserName
- Catalog.DB
- transport.port
- server.hss.bpmApplication
- Server.DataFile.dir
"The 'SYSTEM' database contains no Studio catalog tables. Check the value of the "catalog.db" parameter in the server.properties file. »< i="" wouldnt="" recommend="" using="" the="" system="" user="" for="" the="">
See you soon
John
http://John-Goodwin.blogspot.com/
-
Receive error message when you connect to a Hyperion Essbase Studio 11.1.2
Hi all
I searched the forum trying to find an answer to my problem without success. Thanks in advance for any help you can provide.
When you try to connect to Essbase Studio Client, you receive an error "connection with Essbase Studio Server error: network error ', in the details of the tab of this popup is"network communication with the server failed. Check your network connection and try again.
"Connection refused: connect". I found that this usually means that the Essbase Studio Service is not running. 11.1.2 Hyperion Essbase Studio is installed as a service. I don't know if this is the case in previous environments.
The windows service is running and running and I also try to start from the start menu and it doesn't seem to be errors. But when I look at the logs of start-up, that's what I find.
[2010-08-17 T 15: 29:15.457 - 07:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: ethype-dev] [nwaddr: 192.168.35.235] [tid: 10] [user name: System] [ecid: disabled, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] [arg: sap] could not load the driver for sap.
[2010-08-17 T 15: 29:15.457 - 07:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: ethype-dev] [nwaddr: 192.168.35.235] [tid: 10] [user name: System] [ecid: disabled, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] [arg: teradata] could not load the driver for teradata.
[2010-08-17 T 15: 29:15.473 - 07:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: ethype-dev] [nwaddr: 192.168.35.235] [tid: 10] [user name: System] [ecid: disabled, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] [arg: netezza] could not load the driver for netezza.
[2010-08-17 T 15: 29:15.707 - 07:00] [hyperion] * _ [ERROR] [ESSSTD-043002] [com.hyperion.cp.catalog] [host: ethype-dev] [nwaddr: 192.168.35.235] [tid: 10] [user name: System] [ecid: disabled, 0] [SRC_CLASS: com.hyperion.cp.catalog.Catalog] [SRC_METHOD: initialize] Catalog.CannotInitializeStorage = Cannot initialize catalog storage. Make sure that the server.properties file contains the correct information. [[_*
com.hyperion.cp.catalog.exceptions.CatalogInitializationException: catalog. CatalogInitializationException.StorageInitializationFailure
at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:221)
at com.hyperion.cp.catalog.transaction.TransactionManager.initialize(TransactionManager.java:64)
at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:100)
at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:166)
to com.hyperion.cp.catalog.Catalog. < init > (Catalog.java:87)
to com.hyperion.cp.catalog.Catalog. < clinit > (Catalog.java:75)
at java.lang.Class.forName0 (Native Method)
at java.lang.Class.forName(Class.java:169)
at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:63)
to com.hyperion.cp.server.RequestListener$ SystemTask.run (RequestListener.java:1303)
at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:168)
to com.hyperion.cp.server.RequestListener. < init > (RequestListener.java:130)
at com.hyperion.cp.server.ServerMain.initServer(ServerMain.java:192)
at com.hyperion.cp.server.ServerMain.main(ServerMain.java:260)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:215)
... 13 more
Caused by: com.hyperion.cp.catalog.exceptions.CatalogInitializationException: the 'hstudio_dev.hypsql' database does not contain the tables in the catalogue of Studio. Please check the value of the "catalog.db" parameter in the server.properties file. _
at com.hyperion.cp.catalog.storage.StorageEngine.validateSignature(StorageEngine.java:136)
to com.hyperion.cp.catalog.storage.StorageEngine. < init > (StorageEngine.java:86)
to com.hyperion.cp.catalog.storage.SQLStorageEngine. < init > (SQLStorageEngine.java:20)
... 18 more
]]
I opened the server.properties file located under the E:\Oracle\Middleware\user_projects\epmsystem1\BPMS\bpms1\bin directory, and everything seems to be OK here. Here below.
#
#Tue August 17-14:45:43 PDT 2010
Catalog.autoinit = true
Catalog.UserName = hypsql
transport.Port = 5300
Catalog.URL=sqlserver\://ethype-SQL.Sierra.local\:1433
Catalog.Password=69tVGsObffmeWaFX0LB2tA\=\=
Catalog.DB = hstudio_dev.hypsql
server.hss.bpmApplication=BPM\:77538
I tried out the "-" in the server names and the name of DB without help, I tried to put quotes around the "hstudio_dev.hypsql" with no luck, and I tried to connect to a database that had no '-' inside. I also followed the steps described by the support for the same question in 11.1.1.x which you enter in the DB > Security > schema > add a new schema/user, create the user and the owner of the schema, etc. It also did not help.
This is a new installation and everything else is fine to connect to DB, default user hypsql DB is the DB hstudio_dev. I installed in different environments, and this same problem happening in both environments. Please let me know if you have any questions, thank you for your time and your help.
Also, I realize in the DB and I see that a lot of tables in fact were created then it will connect at least during Setup. I've also reconfigured several times without success on different from the DB and always new/clean the DB. and the hypsql of the user is a DBO for this DB. It's DB SQL 2005, Windows 2003 servers.
Published by: 789316 on August 18, 2010 11:07
Published by: 789316 on August 18, 2010 11:10
Published by: 789316 on August 18, 2010 11:13
Published by: 789316 on August 18, 2010 11:21You seem to be two people now, but you
Catalog.DB = hstudio_dev.hypsql
If the implementation is the same wouldn't
Catalog.DB = hstudio_dev.dbo
See you soon
John
http://John-Goodwin.blogspot.com/ -
Hi all
I am trying to create a cube Essbase Studio v11.1.2. Its showing successful deployment with warnings... but when you try to view the data in the EA indicating his error msg
Cannot run view cube
Malfunction: Essbase
I followed the link below to fix the problem.
Essbase studio deployment error message
I can find a rule of load with the name of the database and able to open it.
Here, I can only see column dimension and the measure without data.
Please tell me what to do next to display the data in the EA?
Thanks in advance...
LolitaI'll assume this BSO as you did, what you've done now is built, the hiearchies and data loaded Level0, now you need to aggregate these data at higher levels, in the OSI world, this is done generally by using a calc script that you can grow in the EA.
See you soon
John
http://John-Goodwin.blogspot.com/ -
Hi all
I am very new to hyperion. I installed services, essbase and planning foundation and configured them. Then I installed essbase studio via EssbaseStudioConsole and started the system to help start the EPM system. When I run EPM System diagnosis, is everything except for this error:
ESS FAILED: connection of Essbase Studio Essbase Studio server validation
Error: The network communication with the server failed. Check your network connection and try again.
Recommended action: application startup
1 second
What could cause such a mistake? I'm looking for what things in the environment that Essbase Studio depends on, but could not find one.
Any help is very appreciated,
ZainYou need to check the server.properties for correct syntax to connect to Oracle, the file will be in
/user_projects/ /BPM/BPM/bin If you use the name of the service Oracle syntax is
Catalog.URL=oracle\://host\:port/OracleServiceName
If you use the SID Oracle syntax is
Catalog.URL=oracle\://host\:port\:sid
If you make any changes, restart the service of Studio.
Also, it looks like you use the schema system is that correct?
"The 'System' database contains no tables of the catalog Studio."You shouldn't really use the diagram of the system and create one for the Studio.
John
http://John-Goodwin.blogspot.com/ -
while trying to uninstall Microsoft visual studio 2010 Tools for office Runtime(x86) of the Control Panel, it is showing an error as [Error1316.A network error occurred trying to read the file "C:\Program Files\Common Files\Microsoft Shared\VSTO\10.0\Microsoft Visual Studio 2010 Tools for Office Runtime(x86) \vstor40_x86.msi"] but the physical location of the file exists.
Hi Haran,
The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:
-
Unable to connect to Essbase server through smartview - network error
Hello
I installed and configured 11.1.2.3 EMP:
APS - Windows Server
Essbase Server - Linux
I tested the connection between the Regional and Essbase service Console and it works fine,
When I tried to connect via SmartView Essbase I got the following error message:
«Unable to connect to the server of Essbase.» "Error: Essbase Error (1042003): [11001] network error: impossible to retrieve the information of the name of [EssbaseCluster-1].
I will be very happy for suggestions,
Thank you
Yuval
The problem has been resolved.
I discovered that it was with Linux server, I could configure the Essbase server from Windows server to Windows server while it was certainly the problem of Linux.
To solve it, I had to re - install Linux server, I configured the Essbase server and she succeeded. I don't know what was the reason for the issuance of the periphery, but I guess that there is a missing package installed on Linux server and this cause of the wrong configuration.
Yuval
-
Error in access with Essbase Studio Console
We get the error to connect with Essbase Studio Console.
"children for Root." Reason: Name of unknown package 'extraction '. Line = 1. »
This is a new installation.
E.M.P. 11.1.2.2Hello
During the installation of Essbase Studio only, ess_es_server.jar and ess_japi.jar are missing. If you install Essbase and Studio, they have not disappeared.
This is due to the new bug 14232814 - in the COURSE of the INSTALLATION ONLY STUDIO SOME. NOT INSTALLED JAR FILES
Try the following:
Stop Essbase Studio
copy the files in EPMSystem11R1\common\EssbaseJavaAPI\11.1.2.0\lib
ess_es_server.jar
ess_japi.jar
If the folder does not exist, create it.1. stop essbase Studio.
2 remove the tables in relational database
3 paintings to recreate.
4. start Essbase Studio.Scripts to let fall & recreate the catalog located under
oracle\middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\database\common\db_nameIt could be that useful...
KosuruS
PS: If the above information is useful, mark :) -
I am emptying everything that I don't use in the metadata browser. I am trying to remove something, but then I get this error:
Mistake to destroy the declaration. Row = 143.
Table of relationship refers to non-existent object. Report the error to Technical Support.
Is there something in the backend db Essbase Studio to be removed?I had happen to 11.1.1.X Studio where I removed the artifacts that were used. It pipes the database completely. There really is an order you ERA to remove things. Basically, reverse order that they were created. With the help of the lineage is a good way to check where we use artifacts. 11.1.2.1 had much better to check see if oyu can delete everything first.
At this point, I recommend restoring a backup system tables
-
Drill thru report error test Essbase studio
Hi all
Drill thru report Essbase studio produced the below error: impossible to retrieve the drill to the result.
Error in the select statement. Line = 2466.
Error in the execution of the query. Check the query and try again.
Cannot execute an SQL query
ORA-01791: not a SELECTed expression
No idea I'm able to test some of the dimensions, but this error is coming up for a few dimensiosns... I checked all the joins between the dimensions and facts... all right.
Thank you
PraveenI suggest to look at the logs to see if you can find the generated SQL statements or to rent the values being passed. then you can start to debug the issue
-
Essbase Studio Error (1021001): could not establish a connection with SQL data
Hello.
I try to deploy a cube Essbase Studio but I get the error: "* Error (1021001): could not establish connection to the SQL database server."
My environment is Linux 5, Oracle 11 g and EMP 11.1.1.2. Database Oracle and Essbase has been installed with different users. The .bash_profile to hypadmin user (i.e. install Essbase) I put the following variables
ORACLE_BASE=/U01/app/OracleDB/product/11.1.0
ORACLE_HOME = $ORACLE_BASE/db_1
LD_LIBRARY_PATH = / usr/X11R6/lib: $ORACLE_HOME/lib: $LD_LIBRARY_PATH
ORACLE_HOSTNAME = DevBi.sigfe2
PATH = $ORACLE_HOME/bin: $ORACLE_HOME/jdk/bin: $ORACLE_HOME/bin: / sbin: $ORACLE_HOME/opmn/bin: $PATH
ORACLE_SID = orcl
JAVA_HOME=/U01/app/InstallFiles/JDK1.5.0_19
In my pc (windows xp), I can open the Essbase Studio console, the connection to the Oracle server, get the tables and create a minischema of measures and hierarchies (I can see the preview of hierarchies). I also can create cubes with EAS and can connect with MAXSHELL to essbase.
When I try to deploy the cube of Essbaes Studio there get the error ' Error (1021001): failed to establish connection to SQL Database Server.
The Essbase Studio log file says:
+ 12: 40:16 24/07/09 (admin-1) NEWS beginning hierarchical creation in the database "5.4.0.41:1423.POC_ESS. POC_ESS1 '... +»
+ 12: 40:16 24/07/09 (admin-1) FINA signed on Essbase by CSS token "5.4.0.41:1423" successfully... +.
+ 12: 40:16 24/07/09 (admin-1) building INFO Start dimension 'DM_CIUDADES'... +.
+ 12: 40:16 24/07/09 (admin-1) MAS FINA start creating rule file... +.
+ 12: 40:16 24/07/09 (admin-1) INFO SQL statement was created and implemented rule /home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+ file «»
+ 12: 40:16 24/07/09 INFO (admin-1) the query is "SELECT (CONCAT ("reg_", CAST (cp_105." ((ID_REGIONPADRE' AS VARCHAR2 (1000))) as 'REGION_PADRE', (CONCAT ("reg_", CAST (cp_105. (("' Be ' AS VARCHAR2 (1000))) as 'REGION_HIJO', cp_105. "' DE_REGION ' as 'REGION_HIJO. Defaults to"GO"POC ". "" Cp_105 ORDER BY DM_REGIONES_ESS3 cp_105. "" CSA DE_NIVEL ', cp_105. "" CSA ID_REGIONPADRE ', cp_105. "' BE ' ASC ' + '.
+ 12: INFO file 40:16 24/07/09 (admin-1) rule has been created and saved as "/home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+ ".
+ 12: 40:16 24/07/09 (admin-1) FINA Essbase starts to add members to DM_CIUDADES dimensioin based on the rules file. +
+ 12: 40:16 24/07/09 (admin-1) ADVERTENCIA (1021001): error al set conexion con el servidor SQL databases. Check out el registro for more information. +
+ 12: 40:16 24/07/09 (admin-1) ADVERTENCIA essbaseDriver.FailedToBuildDimensionException +.
+ 12: unexpected exception SERIOUS cubes from 24/07/09 (admin-1) 40:16 + EssbaseExport to be deployed
-Exception-
com.hyperion.cp.datasources.export.essbase.EssbaseDriverException: could not deploy Essbase cube
....
Thank you for everyone who has an idea to help me solve this problem.
A.S.Hello
If you type database SID lowercase, try entering ITO uppercase. Strange, but my colleagues and I encounter this behavior several times.
-
Essbase Studio Console cannot connect remotely to Essbase Studio Server
Hey all,.
I could use some help with Essbase Studio... I installed Essbase in distributed environment (Studio, Integration Services, and Essbase Server are installed on the same machine). Now, correct me if I'm wrong, I'm starting Essbase Studio Console, when you are prompted, I should enter the server name (address) Essbase Studio Server where, as a result, the machine mentioned above. It works fine, when it's done in client tier installed on this machine, but I can't seem to log on remotely (from another place), the error is: network communication with the server failed. Check your network connection and try again.
Connection timed out: connect
All advice? Thanks in advance.The studio console can be located anywhere and connect to studio server, if the server of the studio is definitely up and running, it could be a firewall issue, make sure that the ports of studio are certainly open.
See you soon
John
http://John-Goodwin.blogspot.com/ -
Hi all
I installed 11.1.1.3 on win2003 server. It works very well.
When I opened the Essbase studio Console with from Studio Server manually every time it's show error
Error connecting to Essbase Studio Server
Reason network error-
Please let me know how to start Essbase studio without starting Studio Server each time.
Thank you
AlainHello
The essbase studio server must be started before you can use the client, the client connections to the server studio.
It's the equivalent of saying why can not I use customer EAS without starting the application server in Regional service.
You can also set a studio as a windows service, have a read here
See you soon
John
http://John-Goodwin.blogspot.com/ -
Essbase Studio impossible to 'Examining the sample data' in the Oracle DB Data Source
E.M.P. version 11.1.2.3.500
Oracle DB 11.2.0.4
on Windows 2008R2
I created a user DB ESSTBC with the following user privileges
CREATE SESSION, CREATE TABLE, CREATE TRIGGER, CREATE TYPE, CREATE VIEW
This is my first attempt on the Essbase Studio, so I executed the following scripts as the user ESSTBC to create the TBC tables and load the data
tbc_create_oracle. SQL
tbc_sampledata. SQL
I am able to connect with ESSTBC and select the tables all loaded and made sure the data is loaded correctly
Then in the Studio of Essbase, I created a data source, which I can list all the tables in the schema ESSTBC in 'Data Source Navigator'. I also managed to create a Minischema by joining the tables SALES, SCENARIO, and MEASURES.
However, in "Data Source Navigator" when I select "SCENARIO", right click and select "View Sample Data", I am able to pull data from the table. that is the table with all the names of columns grid but no data. No error messages were shown in "Messages to the Console.
Back to Developer SQL and connect the same DB as ESSTBC, I have no problem do a "SELECT * SCRIPT;" and recover all the data of the table without a problem.
I proceed creating dimensions elements then a hierarchy of "SCENARIO". But again when I try to get a glimpse of the hierarchy has got an empty tree. Apparently, there's something wrong,
No matter what mark on what I missed?
Thank you very much.
Problem solved. The cause being my stupidity ruin a access DB. I can see examples of data without changing anything in Essbase Studio after you change the DB user rights.
-
Network error [10053]: can not send data when you run a calc in Planning
Hi gurus,
I get a network error [10053]: can not send data when you run a calc in a planning application.
Looking in the newspaper of the App in Essbase server, I found the following:
[Thu Apr 9 15:37:36 2014] Local/MYAPP / / / 140285871445760/Info (1008108)
Internal logic error Essbase [1]
[Thu Apr 9 15:37:36 2014] Local /MYAPP///140285871445760/Info(1008106)
Exception error log [/Essbase/oracle/Middleware/user_projects/epmsystem1/diagnostic/newspapers/essbase/essbase/app/MYAPPlog00004.xcp] is being created...
[Thu Apr 9 15:37:36 2014] Local /MYAPP///140285871445760/Info(1008153)
A core file can be generated in [/Essbase/oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1/app/MYAPP/ESSSVR.] Wed_Apr__9_15_37_02_2014]
[Thu Apr 9 15:37:36 2014] Local /MYAPP///140285871445760/Info(1008107)
Exception error log completedmyapp/Essbase/oracle/Middleware/user_projects/epmsystem1/diagnostics/log/essbase/essbase/app/MYAPPlog00004.xcp please contact technical support and provide them with this file
[Thu Apr 9 15:37:36 2014] Local /MYAPP///140285871445760/Info(1002089)
RECEIVED COMMAND OF THE UNUSUAL STOP - REQUEST FOR TERMINATION
My environment is Windows 2008 R2 with Oracle Database and having only Essbase server in a SUSE LINUX box.
Could someone help me on this?
Thanks in advance
We've tracked down the instructions in the calc and the error occurs in two blocks of calc. After the split in two blocks of the calc has no error more.
Thanks to you all
Maybe you are looking for
-
Security Center can't change your automatic update settings
Hi friends I changed my 'UI language' from German to English and since then my "windows update" does not work. When I goto "Windows secirity center" and try to change it to auto update (which was the case previously), it says "Security Center is unab
-
ITI usually occurs during playback of facebook, but has also happened while browsing on the net... This script is running? Any clue that the script is running it is causing the computer running slowly... Close script or let it run... .It lets you sto
-
How can I fix a basket that is corrupt?
When I run Registry Mechanic, I get a message that c... Recycle Bin is corrupted and asks me if I want to empty the bin. It happens regularly. How can I fix a corrupt basket?
-
I don't remember my master password
-
DVD RW drive (e) does not recognize blank CD, music CDs and DVDs
It has just started the other day, I first tried to download a cd purchased in my library. Windows Media Player telling me I need to insert a disk. Then I tried to use a DVD and a blank CD - R disc and the same result. I tried to update my driver