In the BIOS boot device options

Similar Questions

• find, "with the cd on the bios boot < on apple PC with win xp.

  Password lost on cp family.  We do not find the boot from cd on the biops. It's a PC with win xp apple

  Hi haouatim,

  There is nothing indicating 'Boot from cd' in the bios. You will need to arrange the priority of disc to create your CD / DVD Drive as the first boot device.

  Leave the Windows XP cd in the drive and restart your computer. It will then display you the option «press any key to boot from CD...» ", and then you must press a key or the Enter key.

  Reference: http://www.ehow.com/how_6196502_set-bios-boot-cd-vista.html

  You will need to save your own installation of important data of the operating system that result formatting will destroy all your data from the partition of the said.

  I hope this helps.

• Not found on the computer boot device 250 hp laptop

  Hi, I have problems with starting my laptop. When I turn it on it comes up with the found boot device, please install an operating system on your hard drive, hard drive (3F0), F2 system diagnostics. Any ideas why this happens?

  Hello

  If you have the copy of the invoice, you can contact HP Support on the phone and get the security number set. Also since the disk HARD is not get in the BIOS. Once the question of the guarantee is fixed, you can ask them the HARD drive replacement.

  http://WWW8.HP.com/us/en/contact-HP/support.html

• My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc. What should I do with it?

  My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?

  Brand: HP
  Type: laptop
  Model No.: Pavilion zt3000
  512 MB DDR1 RAM
  Thank you very much!

  Hi Dominic,

  Are you able to get into BIOS to make changes?

  If so, you can try to reset the default settings of the BIOS and check.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.

• When I try to power to the top of our Dell computer, we get a black screen and the message "boot device available. Press button to try again. »

  Pressing enter does nothing, then it usually starts by pressing "ctrl-alt-delete."  The computer runs VERY slowly.  We have Windows XP and also just downloaded Safe Eyes software McAfee, but it was slow & have start questions for a while.  My son also downloads a lot of PS3 games, etc.  Who would have something to do with it so slow?  Is there something we can do to clean it ourselves instead of redoing it to Best Buy and pay $100?

  Hello

  Start are what problems you referring?

  Method 1: May be that the hard drive is not detected. Boot to the Bios Setup and make sure that the first boot device is defined as hard drive and also make sure that save you the settings and check what is happening.

  If your computer is not configured to boot from a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions. For assistance, contact the manufacturer of your computer.

  Warning of the BIOS:

  BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Method 2: If you are able to boot to the desktop then try to perform the clean boot on the computer to resolve the performance issue.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on Startand then click run.

  2. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  3. click on the general tab, click Normal startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  The following articles could be useful.

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• Select the appropriate boot device

  I bought some DDR 512 MB RAM for my computer. I put it in the motherboard, with no problems. But when I start my computer, it comes to the top with the main screen which gives the choice of the collection system, the boot menu and the option of othe, then within 2 seconds, the screen goes all black and said "Reboot and select proper boot device or insert the media in the selected boot device and press a key." For the moment I still RAM into the motherboard, I have nothing plugged in the USB ports except for my mouse.

  Hi Barda,

  Please find the link below that matches the description of the cable from hard drive and how it is connected inside the tower for your computer.

  http://support.HP.com/us-en/document/c00639864

  The edges of the metal panels can cut the skin. Make sure you do not drag the skin along any inside metal edge of the computer.

  Hope this helps for you to find cable and make sure that the connection is put in place and you're back in business.

• S in Probook 4530 boot device option

  When I press F9 (Boot Device Options), it shows the following only-
  1. Bay of upgrade for laptop,

  2. hard drive BNotebook,

  3, Rthernet for laptop

  How can I boot from the CD/DVD?

  Solved

  If I select the Bay of upgrade for laptop, it starts on the DVD.

• Virtual machines Windows display "reboot and select the proper boot device or insert boot media in selected boot device.

  I downloaded the VM Windows and created a machine. The machine should start with ' Microsoft Corporation PXE Boot Agent v2.00 (built-in BIOS) (C) Copyright 2008 Microsoft Corporation all rights reserved.»

  "CLIENT MAC ADDR: 00 03 FF 8 1 C 2 C GUID: 2FA ' and more digits"DHCP. "... "with a spinny beside the points thing. After awhile, the... won't have a message "no boot file received" or "any offer DHCP or proxyDHCP was received" with a "reboot and device or insert boot media select start suitable for the selected boot device". What should I do? It also appears on other virtual machines. I tried pressing tools and clicking on install the built-in components, but nothing happens!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

• Satellite A100 CD/DVD drive is not listed in the BIOS or Device Manager

  1. the original drive does not work. After inserting a disc shines the light of the drive and it runs - but nothing else.
  A little investigation shows no optical drive listed in the BIOS or Device Manager (naturally).

  2. perhaps I would reinsert the disc, but I can't find any instructions on internet about this disc removal/replacement.
  Or in the operating manual.

  Can someone direct me to these instructions?

  Thank you very much

  S manual is not the same thing as maintenance manuals. Please note that this is not the same and the exact description on laptop procedure disassembly is only authorized service.

  Anyway, as far as I know the optical disk drive is fixed with a screw and it can be removed from the underside. The screw is placed near the cover of exact memory on the optical drive. Not on side cooling event, but on the other side.

  Be careful because everything you do is at your own risk.

• In Safari, I get the error code BSO D 0 X 80060402, error code Windows defender in the available boot device. He told me to contact Microsoft certified technicians. I do not use Microsoft or windows.

  In Safari, I get the error code BSOD 0 X 80060402, error code Windows defender in the available boot device. He told me to contact Microsoft certified technicians. I do not use Microsoft or windows.

  You have utilities installed on the computer antivirus, cleanup, or other third party maintenance?

• BlackBerry Smartphones BB Bold 9930 cannot find the battery under device options saving Mode

  I have a BB Bold 9930 with OS v7.1.0.163 and I can't find the battery under device options saving Mode. I was told that I needed to update my device to a newer version, after around .3xx software do not know that. But when I try to update my device through BlackBerry Web page software or Office Manager, they both tell me that my device software is up-to-date. How can I update my device software to a newer version on OS 7.1?

  OK, I thought that you must have some higher than 7.1.0.342 BONES to get the battery in watch mode on your output device. Apparently Viva has not published a more recent OS you already have.

  Operating system device provided are "released" by specific carriers once that they are certified and trained to their support technicians, but still, you are able to load any carrier the same model by following the instructions below.

  See the link below to download it and follow these simple instructions.

  Make a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.

  https://swdownloads.BlackBerry.com/downloads/contactFormPreload.do?code=C6BFF625BDB0393992C9D4DB0C6B...

  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

  Note: Some users may be concerned they will void their warranty of device by loading an OS from another carrier. There is really nothing to fear. Please read more information about it here: http://www.port3101.org/power-users/296-blackberry-os-upgrade-including-betas-myths-dispelled.html

  BlackBerry Handheld Software v7.1.0.1189 (Multilingual)

  Package Version: 7.1.0.1189
  Composed of:

  • Applications: 7.1.0.355
  • Software platform: 5.1.0.288
  • File name: 9930AMEA_PBr7.1.0_rel1189_PL5.1.0.288_A7.1.0.355_C _Spire_Wireless.exe
  • File size: 207,62 MB

• Priority of the BIOS boot options is not available

  Hello. I'm changing the boot on my Windows 8 Samsung ATIV Smart PC Pro sequence. I wish that the machine checks first to any bootable USB device before going on the hard drive. This would be necessary in case I would like to recover from a hard drive failure.

  When I press F2, I can see the "Boot Device Priority". But there is only 1 option available: Windows Boot Manager.

  I'm sure that there are other options available, but I did something to remove!

  I disabled the Fast BIOS mode as suggested by some, but the situation persists.

  How can I see other boot options?
  Kind regards
  Maury

  Quote here

  On systems with Windows 8 pre-installed, you can access the configuration screens UEFI (BIOS) from Windows 8 Start menu:

  1. Press the windows () key + C or by scanning from the right edge of the screen to open your charms.
  2. Click settings.
  3. Click change PC settings.
  4. In PC settings, select general.
  5. Under advanced boot, click restart now. The system will restart and display the start menu in Windows 8.
  6. In the start menu, select Troubleshooting.
  7. In the troubleshooting menu, select Advanced options.
  8. In the advanced options menu, select settings from the UEFI firmware.
  9. Click reboot to reboot the system and access UEFI (BIOS).

• Compaq Presario CQ57: Need to get into the BIOS boot options received the disabled system error 59025057

  Need to enter boot BIOS options have system error disabled 59025057 also want to disable the password of the bios for the future

  @thatmomgamer

  Please enter:

  46983099

  Kind regards.

• Hi, install SSD on Acer Aspire VN7 - 591 G-70RT and setting for the primary boot device?

  Hello

  I have an Acer Aspire VN7 - 591 G-70RT that came with a Western Digital blue 5400 RPM HARD drive which is limitation of my performance of laptops. I contacted Acer recently to ask for upgrades that might be made and they confirmed that I could build an SSD 256 GB and up to 16 GB of ram.

  I bought an SSD now and install, but I wanted to ask how I could continue on the definition of the SSD as my main drive.

  At this point, I guess I could install the SSD, then select it as primary boot device in the BIOS by pressing F2, and then install windows 10 via my USB. If this should be good to reboot or the existence of windows on my current HARD drive causes a conflict?

  Thank you

  I have the device works now and here's what I did.

  WEAR AN ANTI STATIC BAND:

  Step 1) remove all the screws on the underside of the laptop

  Step 2) use spudger or credit GENTLY lift a gap between the keyboard and the base, then use the credit card to slide slowly into the space to jump open clips, NOT FORCE.

  Step 3) (OPTIONAL) remove the keyboard connectors by moving clip and gently remove the cable from the Jack. However the HARD drive slipped in for me without necessary to detach.

  Step 4) unplug original WD HDD blue reversing the clip and disconnect the cable

  Step 5) close laptop together and boot with Windows 10 USB install

  Step 6) install windows on new SSD (for me windows automatically activated via the BIOS/UEFI) if it doesn't happen for you, simply re-attatch the original HARD disk.

  Step 7) if the activation is successful, again set HARD drive and original format. I have kept all the original ACER RECOVERY and Partitions (Healthy) in case I need to restore factory default, but formatted primary partition.

• Portege R200 cannot set on the BIOS boot sequence

  Hi all.

  Our R200 entered mode of hibernation after that the battery power is low, then by some unfortunate twist of fate, the battery got deleted accidentally. Now it does not start correctly because every time it displays a BSOD stating Unmountable_Boot_Volume.

  I could solve this problem easily by disabling the hiberfil.sys file, which is the reason for the BSOD, if only I could change the boot order. Unfortunately, enter the BIOS, I am only able to access the first page where the only editable elements are time, date, and passwords. Pressing Pageup and Pagedn does nothing. The BIOS is updated to the last appearing on this site.

  Pressing F12 or F2 when the toshiba logo and icons appear does nothing no more. It's a HARD disk 1.8 "and there are no adapters available in our region. I can boot from a CD if and only if I take the HD. But then, it is useless since I can't fix it like that. It is not recognized if I it reconnect after booting. When I reboot, it does the BSOD thing again. It is becoming a frustrating cycle.

  I scoured these forums for other ways to boot from the CD and apply the suggestions, like hitting 'c', nothing helps.

  Any help would be much appreciated.

  Thanks in advance.

  Hi, the CWB
  What about the boot from usb?
  a stick with a live like bartpe or similar system...

  hard drive cannot be recognized once you have started your machine, because the boot when Initializes the hardware...

  the drive is correctly recognized by the bios?
  refer to the manual, it should there have listed the key combinations to start other devices...

  I think that the hard drive was missing...
  try to boot from sd card - * boot sequence settings must be changed in bios... *
  If you are not able to make this request a servicepartner...