In Windows 8.1 user passwords

Similar Questions

• Getting started: windows searches for a password or Windows prompts you for a user to be picked. He has not done this before.

  Changes on the manufactured hardware and re-installed windows xp.

  Whenever I start the computer now, windows searches for a password. Then I have to choose a user. I'm the only one using my computer.

  Can I stop this or change something?

  I'm not locked out of my computer. Now, I can't sit here and click on certain things, I have not before, instead of just turn on the computer and it processes to get on the desktop.

  Type control userpasswords2 in the Start Run Menu box and change the setting there.

  Autologon for Windows XP

  http://www.Microsoft.com/windowsxp/using/setup/tips/advanced/Autologon.mspx

  John

• Cannot start windows because of user on login screen password

  original title: vista boot

  Ideas: could not start windows because of user on login screen password

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  > Could not start windows because of user on login screen password

  This information is barely enough to give you a decent answer half.

  If you can't sign in because you forgot your password...
  We are not allowed to help users to bypass the password protection, regardless of what are "reasons".
  Here is the Microsoft Policy link to this topic: politics of Microsoftif you have entered the password, and you have still not able to get, so what was the error message?
  You receive the error message? .......
  The user profile Service has not logon. User profile cannot be loaded

  If so, goto Safe Mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, run the Microsoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Opening of session and run the tutorial from Microsoft technical support below.

  3. If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to do system restore: tutorial system restoretutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Opening windows mail requires user name and password every time?

  Windows Mail requires user name and password every time that we open ourselves to it.  All the settings are correct.  What can we do to solve this problem :)   Thanks in advance.

  Windows Mail requires user name and password every time that we open ourselves to it.  All the settings are correct.  What can we do to solve this problem :)   Thanks in advance.

  1. temporarily disable your antivirus software. See if the problem stops.
  2. your account could be damaged. Delete the account. Re-set up your account.

  t-4-2

• After Windows Update, the user cannot access password field on the login in Windows 7 screen

  Windows 7 Home 64 bit, our machine is set with two users - two passwords.  As a result of the automatic application of some updates (a number have been applied at the same time we were absent), a user can no more connection time because:

  -the password field is hidden

  -System attempst to check with a blankc password and return an error of incorrect user or password.

  For some reason that I can't (even if logged on as administraor) remove or change the users password.

  It seems that your security database is damaged. Here are some options you can try:

  • Create new accounts. You can do this through steps 1-5 as before, then by typing these commands:
    NET user "On" xxyyzz / add
    net localgroup administrators "On" / add
  • Perform a restore of the system to a point while the problem appeared.
  • Back up your data, and then reload Windows to a freshly formatted drive.

• AFP://user: password@server + connect as?

  Hello

  before you move on to Sierra, to connect to my NAS, under Finder-> go-> connect to server, I used to type:

  AFP://user: password@server/share_name

  with no pop-up windows ' connect as '.

  Now, after the upgrade, after the command: afp://user: password@server, a "connect as" windows appears and it's annoying.

  Someone knows how to jump this window "connect as"?

  Thank you

  Daniele

  I think it has something to do with SMB being now the default connection for Sierra. I tried the syntax shown you and replaced "afp" with "smb", but still have the screen connect as . Even when you select the server in the left pane of the Finder, I always have to make a sign in as. It is used to remember how I connected and go immediately to the actions on the server, but no more. Always have to connect as.

• How is it, I'm starting my MacBook pro and there is no window to enter my password?

  How is it, I'm starting my MacBook pro and there is no window to enter my password?

  Most likely because you have configured automatic log in users and groups.

• HP L260: EWS user / password HP L260

  I'm trying to update the firmware and I get a pop up window asking the user / pass. I don't know what the user or password would be that I can never remember a set up. I read where I can reset the default settings and avoid this problem, but my concern is to lose all of the profiles that I created.

  Hello

  You a discovery user guide at the following link

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5053950 & docid = emr_na-c03696963 & docLocale = en_US

  Look under restriction of access to the printer

• Satellite A100 is locked because of the fingerprint BIOS & user password

  Hi all

  I have my A100 to my work, recognition of the TouchChip fingerprint a year ago. On initial installation, I recorded my fingerprint of the windows interface.
  Six months ago I had to reinstall windows XP due to infection by the virus that is not repairable. I have installed Windows XP Home edition and downloaded all the drivers and additional software from Toshiba's site.

  I him didn't record again my fingerprints, and I have NOT activated the TouchChip software this time. My problem was only an annoying message at the time the sign that said «you have not saved your fingerprint again...» "and that's it.
  After a 2 week out of town trip (My A100 was locked in my office, and powered OFF - no connection to the sector) at first start, software TouchChip is back from the dead!

  Screen 'TouchChip Bios Extension' appeared after plugging, and my finger is required to load WXP!
  When connecting user WXP dialogue the additional message "you have not saved your fingerprint again... is always here, but I cannot start the machine without my fingerprint." After some digging later in PowerProtector (?) I found an option that says 'enable or disable the use of fingerprints for system and user password BIOS' or something like that.

  I turn this off, and the machine asked to reboot. It was the last time I saw the office.
  After reboot, the system asks password. BUT I DID NOT PUT ANY SYSTEM OR USER PASSWORD!
  Is this possible?
  I did something wrong?
  What is the solution?
  I'm locked out; I don't know why and how the BIOS is locked with a password (so I can't unlock it).
  Please someone help.

  Best regards, Georgios

  I don't know what exactly A100 computer laptop you have, but it seems that the laptop came with the Vista operating system preinstalled.

  You have installed XP and drivers XP only from the Toshiba page.
  But from my understanding, the BIOS should be updated too! The Satellite A100 series supports a special XP BIOS version. If the BIOS was not updated the laptop might not run correctly.

  I don't know if it could have a negative influence on the fingerprint, but nothing is impossible!
  However, the fact is that the BIOS asks for the password. If you don't know this, you need to remove the other... and this can be done by a service provider authorized in your country.

  Request assistance from technicians and explain the whole story! Maybe they will remove the password for free!

  Bye and good luck

• Laptop HP 2000: user password screen forgot lock

  I forgot the user password screen on laptop from HP running windows 2000 8, just after the adjustment for the first time.  There is no option to log in as administrator (only the personal user appears).  There is no personal data / files on the PC.  Need instructions step by step to retrieve or reset the password.  OR another option would be to default factory reset and start again, but once again need directions to do so.

  Hi there @cgoslin,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that you forgot the password to connect to your laptop HP 2000.

  Please follow all the instructions in the document what to do when you forgot your password to login (Windows 8) .

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• Forgotten user password

  Start-up of a 7 year old Dell with Windows XP desktop, but I don't remember my user password. How can I get around this?

  Start-up of a 7 year old Dell with Windows XP desktop, but I don't remember my user password. How can I get around this?

  Keep passwords secure - Microsoft on passwords strategy
  http://support.Microsoft.com/kb/189126

  What to do if you forget your Windows password:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

• bought a used hp, Cann't get xp to open, do not know user password, how do I remove this

  It's a model hp 6643, bought used with wind 98, installed xp and now it asks user password that I don't know before he will go further

  Hi Leon,

  You can try the following steps and check if it helps.

  Method 1:

  I suggest that you try to start in safe mode and then try to log on to Windows using the default Administrator account and then remove the password for your account, check if it helps.

  A description of the options to start in Windows XP Mode

  Method 2:

  If you are unable to log on to Windows in safe mode, refer to the article below and then try the steps mentioned, check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  Also, check out the following links:

  Microsoft's strategy concerning lost or forgotten passwords

  Keep secure passwords - Microsoft strategy on move the passwords

• Error: Windows cannot change the password when attempt to set a password to connect to the Windows XP computer.

  Original title: Windows cannot change the password.

  I'm trying to set a password on my computer with windows xp professional and everytime I try, I get a message saying: Windows cannot change the password. Please can someone help me.

  With our thanks

  Elizabeth

  Hi Elizabeth,.

  You can follow this link & check if the problem persists:

  Impossible to change the password for the administrator account in user accounts in Control Panel

  Hope the helps of information.

• Exchange system user passwords

  When the computer is powered, the first user is able to log in with their password.  After that, the computer changes the user passwords.  the next user must turn off the computer and back upward in order to connect with the password.  What happens and how can I stop this?  I teach school secondary and this only occurs when you use a Dell Optiplex 755.  All the other Dell I don't have this problem.

  Hello

  It seems a little odd that the user password changes automatically. It could be a practical work of a malicious application or virus.

  I suggest you follow the methods described below:

  Method 1:

  Start the computer in safe mode and check if the problem persists. Please follow the steps mentioned in the link below to start the computer in safe mode:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  If the problem does not persist in safe mode, perform the clean boot in order to find the problem causing the element. Check out the below mentioned link to perform the clean boot:

  http://support.Microsoft.com/kb/310353

  Method 2:

  An analysis online computer with Windows Live Onecare.

  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Kind regards

  Gaurav Prakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The new hard drive will interfere with user passwords?

  I replaced my hard drive on my Dell Inspiron (Windows Vista Home Basics).  The new drive will interfere with my user passwords?

  Mona

  Hello

  You do not say what user passwords you talk, after replacing the hard drive which will be then require you to reinstall the operating system

  If you refer to the online user passwords (Facebook, Twitter, etc.), they will remain the same.

  If you are referring to your Vista account permissions to access, with a new hard drive and you reinstall the operating system, you will need to put in place all the user accounts and passwords user again for them.

  See you soon.