Incorrect display of Port settings of the WEB GUI - port-sx300_fw 14088 SG300 - 28 p management

Similar Questions

• Using every night (64). Could not find a way to 'save' the cookies options settings in the Web GUI. Something I'm missing?

  I want to use the option "use the custom settings for history" with cookies turned on in the view of privacy in 35.0a1 every night (2014-09-07). But there is no way that I can save the changes, nightly switch to normative action "remember history" automatically.

  Anyone?

  Maybe you should install the current version of Firefox or switch on the beta update channel instead.

  If you have installed at night because it's the only version that has a 64-bit version, so keep in mind that 64-bit Nightly builds for Windows are generated only for test compilation errors and are not all tests that get any other builds, so the risk that something is wrong can be very high.

  32-bit versions of Firefox should work without problems on 64 bit versions of Windows.

  You can find the full version of the current Firefox 33.0.1 version in all languages and for all systems operating here:

  • https://www.Mozilla.org/en-us/Firefox/all/

  The latest beta version can be found here:

  • https://www.Mozilla.org/en-us/Firefox/beta/all/

• Reset the Web GUI on the M600 iDRAC

  Hello

  I have problems of access to the iDRAC web gui on a couple of blades M600 (needed to get the console and re - install the operating system).

  I read on Google that racadm racreset running can solve the problem, but this seems to be only available on of m610?

  When I ssh into the M600 blade I gives me a prompt SMASH CLP Console (v1.08) and can not find everything related to actually reset the interface itself idrac.

  Is it still possible on a M600?  Otherwise, how can we reset the iDRAC interface?  It does not fundamentally on port 80 - unlike our other blades, also M600s.

  Thank you very much in advance for any pointers or direction.

  Thank you

  SoC

  Rob,

  An option to rest iDRAC on M600 is with the CMC. You can connect to the CMC and perform iDRAC reset page "Overview-> troubleshooting-> Reset chassis components. Select iDRAC reset for the corresponding housing option. You can also do CMC Racadm. Run "racadm racreset m - Server -" of SSH or using remote racadm and CMC IP.

  What iDRAC firmware you have on M600? 1.65 is the last FW for iDRAC M600. If you do not have this FW on iDRAC can you update and check the same. You can download the same from

  www.Dell.com/.../PowerEdge-M600

• An image in the footer is not displayed in preview or on the web

  Hello

  I get a face-lift for our website and work on a copy of the master (header and footer) and a direct copy, but hidden from our home page and for the life of me I can't get an image to display in the footer - or some separate text just above.

  -L'image is only 188kb and looks perfect in design mode with a turning device to give it some life

  -J' have many updated the header and the footer (on the copy of the page) master last week, and other components work perfectly

  -The same picture and text present in the body if I move it there

  -The two have been brought forward, so nothing I can hide from the view

  -They do not show more preview

  The image is of three magazines fanned-out and should appear dead center between the form of flow with your twitter comments in our foot here, with the word "subscribe" appearing just above of > >

  http://www.business-money.com/test.html

  Advice or tips appreciated - I am at a loss!

  Thank you very much

  Tom
  

  This code has a script tag 'open' " '." " Thus the browser looks at everything that follows this embed code to be part of the script.

  The following should work and correct the problem.

• PowerConnect 2824 cannot enter in the web interface

  My company bought a powerconnect 2824, in any case this is the 1st time, I configure the Dell switch. I managed to Setup using cli mode, but after anyway I can't config interface only able to display information and also cannot enter the web interface with the default setting, or after.

  What I did wrong?

  Have you tried to connect to the web gui via different ports? you mentioned port 1 light does not, which is the port you are trying to access the switch through?

  When you are connected to the CLI, which is the result of show # configuration interfaces?

  What are the customers IP settings to?

• The proSafe (JGS524E + GS116E) Switches: Configuration Management Web GUI in VLAN specific

  Hello

  I use a JGS524E and a GS116E. The two are connected via a 802. 1 q uplink with all defined VLANS in him.

  A 802. 1 q other interfaces goes to a pfsense firewall, which serves as a router and dhcp server for each VLAN that I use.

  How can I configure the switches plug are in one VLAN specific and get his IP address of the dhcp server in this VLAN?

  At present, it seems to be random access: it is not predictable that range from intellectual property, it takes its IP configuration via dhcp...

  How management function works internally?

  Thank you

  Markus

  Hello

  Thank you. I tried it out, but the behavior seems to be a little different:

  I configured a static IP address for the switch (10.1.0.13 / 24). I have access to the switch web gui via the ip address of the host of a host directly connected (connected via a trunk port, where I put 1 VLAN on the trunk), but it is all the same, what VLAN that I use:

  When it is connected to the VLAN 1 I have access, but also through 10 VLANS, VLAN 20 and so forth (assumed, I configure my computer appropriate staticly in the IP network, for example 10.1.0.20 / 24). So it seems not be limited only to the VLAN 1. You have access to each vlan, only the IP configuration must be in the same network.

  I'm not sure, how it behaves when cascading the two switches, I have not tried.

  If this information can be useful for other users with the same question about this switching product line.

  For me, this behavior is not very well implemented from my point of view. For security reasons, you must limit access to the administration, for example by allowing access from a specific hardware port or a vlan. With the effective implementation, centralized management for a cascade topology is not easy to set up, perhaps because the behavior is not very clear and not documented in the manuals.

  Mentioned on the edge: there is no available TLS/SSL encryption when accessing the web gui (not https). So the password is transmitted in clear text... not a very good idea, I think.

  Thanks a lot for your help.

  Best regards

  markusd112

• Setting the SSL certificate for the web user interface

  How can I configure the SSL certificate for the management of a SG300 interface? I don't seem to find the configuration option in the web gui?

  Hello Dirk,.

  For import / create / modify h99350 ssl please go to ' ' security > SSL server > SSL server authentication settings.

  HTTPS is enabled by default.

  Thank you and best regards,

  Siva

• vRA 6.2 - Business Group exists in the vRA Web GUI, is not listed by the vCAC Plugin in vRO

  I have this strange situation, where a business group is displayed in the Web GUI, I can modify its permissions, VMs, etc, the list is fully functional. Also, when I choose a computer virtual set up by a member of this group in the vRealize Orchestrator vCAC Plugin, I get the appropriate parent (Organization) displayed.

  However, the Group of companies is not displayed in the plugin under vCloud automation Center--> hostname--> Administration--> business groups, I also tried earlier with Server.findAllForType ("vCACCAFE:BusinessGroup"), without success.

  Someone in the face of the question before?

  Had to reinstall plugins vCAC vRO, charging only for them did not help.

• cannot access the web page of WAP but can telnet

  Can someone tell me why the following configuration won't let me access the web page of the WAP?

  version 12.2
  no service button
  horodateurs service debug datetime localtime
  Log service timestamps datetime localtime
  encryption password service
  !
  hostname EwingWAP
  !
  logging buffered information
  enable secret 5 $1$ z9vV$ M.rY40womPNf7YPOQqC8T.
  !
  username privilege 15 secret 5 careone $1$ nFXA$ ezjkiBAHeboaKYMzB4hpq.
  clock timezone IS - 5
  clock to summer time EDT recurring 2 Sun Mar 2:00 1 Sun Nov 02:00
  IP subnet zero
  !
  !
  Bridge IRB
  !
  !
  interface Dot11Radio0
  no ip address
  no ip route cache
  !
  SSID tsunami
  open authentication
  Comments-mode
  !
  base speed - 1.0 2.0 basic basic-5, 5 6.0 9.0 basic-11, 0 12.0 18.0 24.0 36.0 48.0 54.0
  threshold RTS 2312
  root of station-role
  Bridge-Group 1
  Bridge-group subscriber-loop-control 1
  Bridge-Group 1 block-unknown-source
  No source of bridge-Group 1-learning
  unicast bridge-Group 1-floods
  Bridge-Group 1 covering-disabled people
  !
  interface FastEthernet0
  no ip address
  no ip route cache
  automatic duplex
  automatic speed
  Bridge-Group 1
  No source of bridge-Group 1-learning
  Bridge-Group 1 covering-disabled people
  !
  interface BVI1
  IP 172.18.86.5 255.255.255.0
  no ip route cache
  !
  default IP gateway - 172.18.86.1
  IP http server
  IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/ivor
  y/1100
  radius of the IP source-interface BVI1
  1 channel ip bridge
  !
  !
  Line con 0
  line vty 0 4
  local connection
  line vty 5 15
  local connection
  !
  NTP-period clock 2860650
  NTP 208.90.144.53 Server
  end

  Hi Jason,

  Have you tried the default user name and password?

  Username - Cisco

  Password - Cisco

  Please try the commands below and let me know how it works...

  en

  conf t

  AAA new-model

  local IP http authentication

  end

  Try to open the WEB GUI by using the configured user name and password...

  Concerning
  Surendra

• Cisco 4400 WLC - access web GUI remotely

  I know how to access the graphical interface from the service port. However, I am not able to access the site of Port 0. IPs have all been set correctly. We have a management VLAN in our company. I have configured the management interface of WLC for an ip address from that subnet. Port 0 is connected to a switch of 3560 G. I put the switch port to a port of access to the management of VLANs and I tried to make the switch as a trunk port, with the vlan native on the vlan management. I'm not able to ping, or access the web GUI remotely through the management VLAN. Is it normal?

  Jeff

  Hi Jeff,

  Please try to set 0 as vlan on interface of management on WLC after configuration of vlan native on the switch. If you have not yet tried.

  order - management configuration interface vlan 0

  Note - You must children all wlan r mapped with management interface before any change in CLI.

  hope this will solve your prob.

  Thank you

• How to change security settings, avoid attention "do you want to only display the content of the Web page which was delivered safely.

  Every time I navigate to a new site, I get the following security WARNING "only want you to view the contents of the Web page which was delivered safely. This Web page contains content that are not delivered using a secure HTTPS connection, but likely to compromise the security of the whole Web page. "How can I configure my system so that it does not constantly jump upwards? It's boring as can be! Any help is greatly appreciated! I use Windows XP.

  Go in Panel > Internet Options > Security tab and click on custom level, scroll down to the Miscellaneous section and mixed content display change Prompt to Activate, click OK and click OK , restart your browser.

  I hope this helps.

• Satellite 1410-604-BIOS update > update BIOS Incorrect in the web?

  Hi there again!

  Now with a new and strange issue.

  We all know that tell old... "If it does not break, don't fix it." And if you put in more computer terms, "especially if it's a BIOS.

  Yes, we all know that the BIOS is something quite dellitate to manage. For some reason, we normally feel as if we manage something like nitroglycerine, or radioactive products. And it's because we all know who is put at risk at the moment: our (or sometimes other) computer, the whole system could end up as dead as some pieces of metal, plastic and son.

  Well. I passed through all of this, more than 10 times in my life, and only once, it went wrong. But since this old motherboard was already dead, it was not important. But I've always been EXTREMELY care. Allways cross checked everything before you do anything, allways has a backup and a way to allways and restore that backup... I did COMPAQ systems, which have been prepared in this way. A BIOS update was about about a disc, turn on the PC with the disk in the floppy drive and wait. And if you don't like the results, you just click on 'back to a previus BIOS' and that was it... very nice. And easy.

  A few days ago a friend gave me a Toshiba Satellite 1410 604 to solve some problems that have been her crazy. After you remove a Norton Internet Security has expired, install avast and scan, I found more than a hundred of files infected with a variety of viruses, malware, trojans, and everything you could imagine. Avast all removed, but the rest of the operating system was so unstable that we decide to format it and install from scratch.

  I asked for the restore disks, which obviously it failed because they were lost in one of his trips. After that we had confirmation of Toshiba representatives there is no disk recovery available for this model, because it is too old, we decided to install from scratch like any other normal PC and resigned to losing some of the utilities accompanying that CD and are not available for download on the Web site.

  I downloaded all the software available for this model, including two updates to the BIOS. (In reality an update, but in two versions: Windows and traditional) and prepared a CD with all the drivers and programs as if it were a new system installation. And everything was fine, no problems at all. Until we arrived at the wireless LAN card, but that's another problem is already solved (the mini PCI card for the WLAN does not support the encriptación WEP or WAP, and it is not possible to connect to any LAN encripted wireless).

  At this point, and when I started setting up and activation of peripheral PCMCIA and USB devices (this computer only supports USB 1.1, 2.0 not) I discovered this text from Toshiba Web site:

  "This Bios update adds functionality to your system.
  (BIOS stands for Basic Input and Output System. This program is stored in a chip memory dead on the motherboard.
  When the computer comes on, the BIOS is launched to perform various functions to start.)

  For more detailed updated information, please refer to Information update BIOS Toshiba"

  (you can find it here):

  [http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU], you need to search for:

  Archives
  Satellite
  Satellite 14xx
  Satellite 1410 604
  PS141E

  Quite specific. Isn't?)

  According to the information in this Web site, the available BIOS fits the following models:

  "Satellite 2410 414, Satellite 1410, Satellite 1410 - 654S, Satellite 1410 814, Satellite 2410-303, Satellite 2410-304 s, Satellite 1410 354, 2410-601 Satellite, Satellite 1410-401, {color: #ff0000} * Satellite 1410 604 * {color}, Satellite 2410-404, Satellite 1410-301, Satellite 1410-304, Satellite 2410 S403, Satellite Pro 2100, Satellite 1410 S203, Satellite 2410-304, Satellite 1410 554, Satellite 1410 S102, Satellite 1410 - 354F, Satellite 2410 703, Satellite 1410-303, Satellite 2410 - S203, Satellite 1410-801, Satellite 2410 603, Satellite 1410-902. ', Satellite 1410-313, Satellite 1410-802, Satellite 1410 714, Satellite 2410-354, Satellite 2410 514, Satellite 1410-614, Satellite 1410 704, Satellite 2410 515, Satellite 2410-504, 2410-702 Satellite, Satellite 1410 S103.

  Yes... it's here!

  Now when you go into the "Toshiba BIOS update information", you get:

  "Ref. FAQ: TRO0000000b07.

  A BIOS update is a {color: #ff0000} * operation is relatively simple and can be done by computer more competent users * {color}. All BIOS updates can be obtained from "BIOS update" Section download click here...

  Note: the BIOS files are specific machine the correct BIOS for your machine should be used. »

  Please note that Toshiba does not disencourage BIOS manipulation, on the contrary: they even encourage people to do. It is not badly needed, but at the same time that they encourage people to 'play' with such a delicate question, at the end of this page, in small letters, they say:

  "Toshiba provides this information"as is"{color: #ff0000} * without warranty of any kind * {color}, explicit or implied, including, but not limited to, the implied warranties of quality market or adequacy has a specific use." Toshiba shall not be liable to the topicality, accuracy, completeness or quality of the information provided. {color: #ff0000} * Toshiba is not responsible for damage caused by the use of any information provided, including incomplete or incorrect information * {color}. »

  This should trigger yellow alarms in our minds.

  + "Human error is inherent in man, and it is not possible to eradicate. It will be displayed always, sooner or later"(Prof. James Reason). +

  And finally, I made the mistake. Although I have read this warning, I remembered all these successful BIOS update with COMPAQ and relied for Toshiba. This update was available there, and Toshiba told me that it was for this computer. Great!

  So finally, I disconnected all devices (USB), removed the PCMCIA (WLAN), plugged the battery charger to avoid any possible battery problem, restarted windows, and then Windows started the update (windows version, such as recommended by Toshiba). This drug looked very nice, nothing different from what I usually see on these old COMPAQs.

  As reported by the update program, the system would restart. And in fact he did.

  Windows normally closed (a little faster than normal, but without mistakes, and since there is no other programs that most - even the antivirus not working - no), the computer turned off, all lights (normal) offshore, and then again on...

  {color: #0000ff} * BEEEEEEEEEEEEP... BEEEP... ... BEEEEP * {color}

  OMG! I never movement something SO bad. 3-1-1!

  And now... What a 3-1-1 is here? Award BIOS would mean no card graphics or video deffective card, but it is not true, because it worked 20 seconds ago. There are BIOS.

  He never came again to life. He's still 3-1-1 beep.

  But now comes the investigation on the human factors involved in this accident.

  I found I committed the following errors:

  * (1) * rely in the constructor, even if they have WRITTEN their information may be incorrect or incomplete. (BAD if I was a detective QA & QC).

  * (2) * I cross checked deep enough (until it was already too late).

  * (3) * I haven't looked above for how to make a backup of the BIOS to restore must anything deceive you.

  * (4) * let Toshiba lead me to a path that I didn't walk, just because of their supply of 'increased functionality.

  * (5) * Beleave in Toshiba when they said "relatively simple operation and can be performed by the most competent computer users"... they never said it is infallible. "."

  Then I began the most interesting part of the investigation.

  {color: #0000ff} * "what went wrong?" * {color}

  Obviously, the update of the BIOS has not somewhere, somewhere. And I wanted to know what and where.

  First thing, I discovered that there is another Toshiba search engine called "askiris" ([http://askiris.toshiba.com]) and I looked to see if, for any chance I could get the old BIOS 1.20 version which was installed at the origin of this machine.

  And I found something... VERY interesting:

  Bq. {color: #800080} * of: *------{color} {color: #800080} * ACPI BIOS Flash version 1.10 for Satellite 1410/1415/2410 *------{color} {color: #800080} * bios for these models. SHUT UP. Downloads. DL. 289838 289838 105481 ACPI BIOS Flash version 1.10 for Satellite 1410/1415/2410. 2002-10 - 04 105589... *------{color} {color: #800080} * published 04/10/02 *------{color} {color: #800080} * of: *------{color} {color: #800080} * ACPI Flash BIOS version 1.40 for Satellite 1410/1415/2410/2415 *------{color} {color: #800080} * FDD Version 1.30 shut UP. Downloads. DL. 357972 357972 105481 ACPI BIOS Flash version 1.40 for Satellite 1410/1415/2410/2415. 2003-01 - 31 105589 PUB... *------{color} {color: #800080} * published on 31/01/03 | Rating: *------{color} {color: #800080} * of: *------{color} {color: #800080} * ACPI BIOS Flash version 1.20 for Satellite 1410/2410 *------{color} {color: #800080} * error message when the BIOS TAIS. Downloads. DL. 305240 305240 105481 ACPI BIOS Flash version 1.20 for Satellite 1410/2410. 2002-11 - 01 105589 PUB... *------{color} {color: #800080} * published 01/11/02 | Rating: *------{color} {color: #800080} * of: *------{color} {color: #800080} * ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410 *------{color} {color: #800080} * 1) changed the content be QUIET. Downloads. DL. 330963 330963 105481 ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410. 2003 01 - 03 105589... *------{color} {color: #800080} * published on 03/01/03 | Note: * {color}
  These are: V140, V110, V120 and V130 for 1410/15 and 2410 series.

  GOOD! Or not?

  Let's take a look:

  First thing I did was download all four files.

  Then I took the same version that made the accident: 1.40

  I unzipped the file, which I found:

  2009-06-05 00:17 < DIR >.
  2009-06-05 00:17 < DIR >...
  31/01/2003 08:38 11410v14.iso 1 605 632
  31/01/2003 08:38 511 764 14 1370. EXE
  {color: #ff0000} * 01/08/2003 17:03 2410a9v140.exe* {color 724 480}
  01/09/2003 09:32 250 663 biofca9t.com
  10/08/2002 05:26 30 697 chgbiosa.exe
  31/01/2003 08:36 1 087 instinfo.bat
  2002-05-13 15:25 378 175 launcher.exe
  31/01/2003 08:36 433 launcher.ini
  2009-06-05 00:17 0 list.txt
  31/01/2003 08:36 14 768 readme.com
  * {color: #ff0000} 31/01/2003 08:36 12 513 readme.txt {color} *.
  11 archivos 3 530 212 bytes
  3 dirs 9,404,600,320 bytes free

  And I got my first surprise here: there is a {color: #ff0000} * README. TXT * {color} that was not present in the file that I downloaded earlier from the repository of drivers.

  So I went the readme.txt and I found this:

  'README. CDC TXT 31/01/2003
  Flash BIOS version 1.40 for Satellite 1410
  -----
  This BIOS is applicable for the following models:

  Satellite 1410-S105
  Satellite 1410-S106
  Satellite 1410-S173
  Satellite 1410-S174
  Satellite 1410-S175
  Satellite 1410-S176
  Satellite 1415-S105
  Satellite 1415-S106
  Satellite 1415-S115
  Satellite 1415-S173
  Satellite 1415-S174
  Satellite 1415-S175
  Satellite 1415-S176
  Satellite 2410-S203
  Satellite 2410-S204.

  Please note that the model 1410-604 is * NOT * listed.

  I thought ' well, there must be another archive... ". »

  But then I realized a name that seems familiar, that is, in the directory where I unzipped this file 1.40, and the name is:

  {color: #0000ff} * 2410A9V140. EXE * {color}

  So I took the other file, the update of BIOS_Win, and I discovered that the name of the file is:

  * {color: #0000ff} 2410A9V140. EXE, {color} * (Ups!)

  So I once again, uncompressed to find:

  El volumen of the D unidad no tiene etiqueta.
  El n£ series volumen del mero are: 8838-E175

  Directory of D:\Shared\diskette\2410A9v140

  2009-06-05 00:43 < DIR >.
  2009-06-05 00:43 < DIR >...
  * {color: #0000ff} 01/09/2003 09:32 _250, 663_ BIOFCA9T.COM {color} *.
  2002-07-17 03:38 biosupd2.ini 35
  13/07/2001 13:22 6 277 chgbios2.vxd
  * {color: #0000ff} 10/08/2002 04:26 697 _CHGBIOSA, 30. EXE, {color} *.
  11/09/2001 09:14 134 clean2.reg
  2002-07-17 03:35 342 064 install2.exe
  2002-07-16 06:55 241 664 nchgbios2.exe
  18/08/2001 11:41 3 435 nchgbios2.sys
  23/10/2001 18:55 11 476 nchgbios2NT.sys
  26/08/2001 09:00 49 152 nchgbios2svc.exe
  13/07/2001-17:05 49 152 tbdecode.dll
  2002-03-14 06:42 49 152 TCHGBIOSInfo.dll
  2002-06-21 11:25 1 796 tosclean2.bat
  11/09/2001 12:01 967 tosclean2.pif
  2002-06-21 11:34 toscleanAUTO2.bat 1 841
  2002-06-21 11:44 toscleanSMS2.bat 1 796
  2002-06-21 08:51 2 038 tosntclean2.bat
  2002-06-21 08:51 2 084 tosntcleanAUTO2.bat
  2002-06-21 08:52 2 038 tosntcleanSMS2.bat
  Archivos of 20 bytes, 1 046 461
  2 dirs 9,402,793,984 bytes free

  No readme file...

  Then another issue raised in my mind: what happened to the other file 1.40? What did the other 2410A9V140. EXE are inside?

  This:

  El volumen of the D unidad no tiene etiqueta.
  El n£ series volumen del mero are: 8838-E175

  Directory of D:\Shared\diskette\comparacion_toshiba\askiris\241 0a9v140

  2009-06-05 00:46 < DIR >.
  2009-06-05 00:46 < DIR >...
  * {color: #0000ff} 01/09/2003 09:32 _250, _BIOFCA9T.COM {color} * 663
  2002-07-17 03:38 biosupd2.ini 35
  13/07/2001 13:22 6 277 chgbios2.vxd
  * {color: #0000ff} 10/08/2002 04:26 697 _CHGBIOSA, 30. EXE, {color} *.
  11/09/2001 09:14 134 clean2.reg
  2002-07-17 03:35 342 064 install2.exe
  2002-07-16 06:55 241 664 nchgbios2.exe
  18/08/2001 11:41 3 435 nchgbios2.sys
  23/10/2001 18:55 11 476 nchgbios2NT.sys
  26/08/2001 09:00 49 152 nchgbios2svc.exe
  13/07/2001-17:05 49 152 tbdecode.dll
  2002-03-14 06:42 49 152 TCHGBIOSInfo.dll
  2002-06-21 11:25 1 796 tosclean2.bat
  11/09/2001 12:01 967 tosclean2.pif
  2002-06-21 11:34 toscleanAUTO2.bat 1 841
  2002-06-21 11:44 toscleanSMS2.bat 1 796
  2002-06-21 08:51 2 038 tosntclean2.bat
  2002-06-21 08:51 2 084 tosntcleanAUTO2.bat
  2002-06-21 08:52 2 038 tosntcleanSMS2.bat
  Archivos of 20 bytes, 1 046 461
  2 dirs 9,402,781,696 bytes free

  * {color: #ff0000} they have two 20 files and 1 046 461 bytes. I asumed that they are the SAME two folder {color} *.

  And the readme file does not list the model 1410-604 in its readme file, so I can't explain it except as a Toshiba error. * {color: #ff0000} they put an incorrect BIOS on their website and has proposed updating and somehow lead to such mistakes. {color} *.

  (Except in the case that one of these models is a name that is different from the model 1410-604, and if that's the case... now I don't know why this BIOS do not work with this computer).

  The worst thing is that neither the other files (V1.10, 1.20 and 1.30) lists the 1410-604, apparently so no solution possible workaround for this problem. I need an original v1.20 to the CMOS, and Toshiba seems to have. They offered me to solve the problem, leaving the laptop to an ASP, and pay only € 95 for the work and about € 280 for a motherboard replacement, I will get it resolved. But they offer no guarantees of their possibilities because is a model "too old" and "abandoned" and "unsupported"...

  In other words, they said 'you don't have to bother with it, just go and buy a new' (something of quite out of my reach in this time of crisis): P

  Thanks for reading so far.

  Now, what I need is to get ideas on a work around for this, my ideas are:

  (1) the CMOS has some startup that works (it allows a roll-back if you have the appropriate file). So I need a good BIOS to burn in the CMOS memory, the SAME SAME model (a backup BIOS) but the backup should be sufficient for the burning program (CHGBIOSA.COM).

  (2) it is always possible that the BIOS might be OK, but the CMOS data has been corrupted somehow. If so, the CMOS of compensation could solve problem. But I wasn't able to find a clear cmos from the outside button, and after disasembling I took battery, with no good result. I try to leave the MOBO without battery for a period more long (I left it about 20 seconds) just in case where 20 seconds are not all capacitors for well pass zero values. I don't have a lot of hope in this point.

  (3) try to get a REAL good update from Toshiba. I contacted technical support several times, and I was able to verify that they are only - phone operators, with a script in front of them, and when the problem is going - out of reach, they fall in the same response: "you must go to an ASP. I still have a faint hope to find someone who really knows a little and could illuminate with a good BIOS in this disc.

  (4) as far as I could find, this BIOS is not any BIOS-manufacturer known. It seems that it has been developed by Toshiba (own brand), so the Phoenix crisis recovery disk won't be of any help here. As well as any other BIOS recovery tool not designed for Toshiba BIOS. But I'm open to all ideas, which could be put to the test more or less safely. (Remember that the 'BIOS-BOOT-PART' feature still works, I don't want to lose that possibility alone of redemption).

  Wwwaaaaoooowww... what a falks long post! Sorry about that!

  Forgive me, but I wanted to be really clear.

  Someone give some tips or advice will be greatly appreciated.

  Please don't say that I shouldn't be doing... I already know that. I already did some research and found my mistakes, not to repeat them. Now, I need to spend, to move and to try to solve this problem, or at least learn to solve similar things. As much as possible.

  Thank you once again, in advance, and sorry again.

  FenixDigital

  Post edited by: Fenix_D
  Modified subject to beter reflect what the problem is (apparently erroneous file BIOS in Toshiba Download Center).

  Hi Fenix,

  Wow... He tooked a lot of time to read your post...

  Maybe I can help you.

  The Bios in the website is the right one. If you have downloaded the right version of the Bios.

  Toshiba America, which has most of the time the Askiris you used isn't accurate models for Toshiba Europe.
  This should be the reason, why does not the readme file contain the European model.

  I'll try to do an update of the fresh Bios using the update of the traditional Bios.

  Copy the files on the disk, put it in the floppy drive, press and hold power on the notebook tab.
  After that the laptop is off, press on and hold the key on the left side of space power on the laptop new bar and wait until it turns off again.

  If your laptop does not power perhaps the most, the RAM is default?

  Therefore, if the use of the traditional Bios or change memory doesn't help, and your laptop is still dead you should go to a SPA, but it will cost money.

  I now have my fourth Toshiba laptop and I had never problems with the Bios updates.

  The 1410 is very old I think, so before you go to a SPA, I'd buy a new ;)

  Best regards

  Maurice

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• When my friend l. a automatic updates for Windows Vista, it can no longer browse the web, well connected (as evidenced by Skype and diagnostics) the message "internet explore cannot display the page" coming up. Is there a way to fix this?

  Explore cannot display the page
  Vista updates
  Restart

  Hello

  Welcome to Microsoft Windows Vista Forums.

  I suggest you follow these steps:

  Method 1: See if you can view another Web page

  To do this, follow these steps:

  Start Internet Explorer.

  In the top of the browser address bar, enter one of the following addresses:

  http://www.Microsoft.com

  http://www.MSN.com

  http://support.Microsoft.com

  If you do not receive a similar error message after entering one of these addresses in the address bar, contact the owner of the Web site where you see the problem. The website is maybe temporarily unavailable or other problems.
   
  If you receive the same error message, go to the next method.

  Method 2: Run the Network Diagnostics tool in Internet Explorer

  To do this, follow these steps:

  Start Internet Explorer, and then try to access the Web page that displays the error message.

  On the page that displays an Internet Explorer error message, click diagnose connection problems . The Network Diagnostics tool will run. When the tool has finished, it will notify if you one of the following results:

  He was unable to find a problem.

  It has detected a problem. In addition, the tool will provide guidance on the next steps to take to resolve the problem.

  Note Users of Internet Explorer 6, click on detect network settings

  Click IP address , and note the IP address. You may have to it for future troubleshooting.

  Follow the steps in the Network Diagnostics tool to fix any connection problems.

  Start Internet Explorer.

  If you receive the same error message, go to the next method.

  Method 3: Use the delete browsing history

  If resetting the modem or the router has not resolved the problem, delete your browsing history might help. Follow these steps to delete your temporary Internet files, history and form data:

  Internet Explore 7

  Start Internet Explorer.

  On the Tools menu, click delete browsing history .

  Select the check box next to Temporary Internet files .

  Select the check box next to the history .

  Select the check box next to form data .

  Select the check box next to Cookies .

  At the bottom of the window, click delete .

  Close Internet Explorer and restart Internet Explorer, and then try to access the Web page.

  Internet Explorer 6

  Start Internet Explorer.

  On the Tools menu, click Internet Options .

  In the Temporary Internet files section, click delete files and then click to select the text box delete all offline content , and then click OK .

  In the history section, click clear history , and then click Yes .

  Close Internet Explorer and restart Internet Explorer, and then try to access the Web page.

  If you receive the same error message, go to the next method.

  Method 4: Use the Internet Explorer (No Add-ons) mode

  To do this, click Start , point to programs , point to Accessories , point to System Tools and then click Internet Explorer (No Add-ons) .

  Note The Internet Explorer (No Add-ons) mode is only available for Internet Explorer 7 and Internet Explorer 8.

  If this resolves the problem, follow these steps to isolate the browser add-on that is causing the problem:

  Click Tools and then click Internet Options .

  Click on the programs tab, and then click Manage Add-ons .

  Click an add-on in the name list, and then click disable .

  Repeat step 3 until you identify the add-on that is causing the problem.

  If the methods in the "Resolution" section General did not resolve your issue, you can try to use the methods in the "Advanced Troubleshooting" section If you are not comfortable with advanced troubleshooting, you can ask for help or contact support. For information about how to contact support, please visit the Microsoft Web site at the following address:

  http://support.Microsoft.com/OAS/default.aspx?PRID=12357

  For more information follow the link below:

  http://support.Microsoft.com/kb/956196

  Hope this information is helpful

  Suresh G

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Receiver error message: 'due to unidentiferd problem windows can not display fire wall settings' and windows cannot display the firewall settings.

  Original title: windows cannot display HELP fire wall settings

  I go to the control panel and click on firewall and I get this message "due to unidentiferd problem windows can not view fire wall settings.

  I want to check that it is on.  Any suggestions?

  I can't also on the wall of fire to the security settings in the control panel.

  Help

  Hi TomFlow,

  1. which edition of Windows XP you are using?

  2 did you a recent software or hardware changes to the system?

  Method 1:

  You can try to start the Fixit from link and check if it helps:

  Diagnose and automatically fix problems of Windows Firewall service

  Method 2:

  We can refer to the article and try the steps.

  You cannot start the Windows Firewall service in Windows XP SP2

  Important: The above article tells you how to edit the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  How to back up and restore the registry in Windows XP

  Method 3:

  You can also try the steps in the following article:

  You cannot enable or disable the Windows Firewall setting on a Windows XP Service Pack 2