InDesign will print only 1 copy.

Similar Questions

• All OfficeJet5610v in a HP: HP printer will print but not copy

  HP printer will print, but not copy.  This computer printout, will be printed over the clouds, will analyse and will fax, very well. However, he suddenly stopped making copies. The scanner bar through the glass and lights, but he won't have a copy. All pages Gush in white.

  Hello @MTAI,

  Welcome to the Forums of HP Support!

  I would like to help you today to address the issue of copies in white that you encounter during the copy of your HP Officejet 5610v all-in-One Printer. To be honest, this problem looks more because of printing system, rather than a failure of the copy. The reason is because the copy uses the same exact material like scanning components. Because you are able to scan without problem on your computer Windows 8.1, we know that copy/scanning mechanism works within your printer. However, when you print from your computer, if the document is sent to your printer as a file of type 'image' the ink color is used to 'do' or 'enrich' the black ink. Therefore, your machine may be appearing in print in fine black ink of your computer, when in reality, it's just the color ink making the black color. When you copy from your printer, if you decide to make a copy of only black ink black will be used. If you choose to make a color copy will only color ink. To check if the cartridges and the print in your printer system working properly, I'll make you start troubleshooting by a quality diagnostic report print to your printer. Can I please you follow the steps below.

  How to print a report of quality diagnostic:

  1. Make sure the product is on and not used, plain white paper loaded.
  2. On the Control Panel, support on * and #, then press 1, 2, and 7.
  3. Press the right arrow key () until the reports displayed on the control panel and press OK.
  4. Press the left arrow button () until the vpp self test displays on the control panel and press OK. The test page will print.

  

  • (1) printed by the right cartridge
  • (2) printed by the left cartridge
  • If this report print with color and black: that the problem you are experiencing is not caused by your printing system. On the contrary, there may be a problem of programming that takes place within your printer which is originally the function copy to fail, while the scan function continues to work. Can I please have you check on your computer that your scan function always works right now.
  • If this report prints with lack of color or lack of black ink: that the problem you are experiencing is actually caused by a conflict of printing system in your printer, rather than a failure of the copy. To solve this problem please can I you click here. Once the support document opens, please run through the second step, step 3, step 4 and step 5. This includes measures void under the steps listed to complete. Once the troubleshooting is complete please try to copy again.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• Printer defined now print only 1 copy

  The user came with this strange situation.
  
  A printer has been set to the PROD.
  
  Users who said about the old printer when you issue a print file allows it to print several copies. example, if you say 3 copy will be printed without any problems. Now with the new defined printer it prints only one copy.
  
  EBS 11.5.10.2
  
  Where I should look?

  Vicky1 wrote:
  The user came with this strange situation.

  A printer has been set to the PROD.

  Users who said about the old printer when you issue a print file allows it to print several copies. example, if you say 3 copy will be printed without any problems. Now with the new defined printer it prints only one copy.

  EBS 11.5.10.2

  Where I should look?

  Is the problem with a single report or all reports?

  You have the value of the option "simultaneous Copies: report" profile set to a value?

  How investigate the print issues and work towards its resolution? [297522.1 ID]

  Thank you
  Hussein

• C4750 all-in-one will print only 2 page 8

  I finally got my all-in-one printer of C4750 to leave saying he was offline now, now it will print only less than 2 pages of a Quebec of 8 pages.

  Hi CIN4,

  Thanks for the reply.

  I would recommend that you download and run the HP print and Scan Doctor and see what diagnosis it can offer you

• Photosmart D110 AIO will print, won't copy or scan

  Photosmart D110 AIO will print but won't copy or scan. The printer screen bounces to 'Copy' without copying. Same problem as stand alone or connected to the computer. Help!

  Try to unplug and plug back in.

  If this does not work, you may have a hardware problem.

  This snack, try this.

  {Insider reset deleted information}

• MY PRINTER WILL PRINT ONLY IN OFFLINE MODE

  I have a printer HP 309 a and it will print and offline.  I have a HP computer, windows 7, 64 bit.  Can you help me and thank you very much.

  How is the connected printer - USB, LAN, LAN cable wireless, bluetooth? There the error messages on the computer screen or the printer?  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• OfficeJet Pro 8600 Premium: When copying from the plateau the copier will print only 1/8 of page, then stop.

  Copier is towards the top sometimes & don't print that page of bucket 1/8, Athens he spits as if this one ends. Have unplugged the power cord & reconnected. Ran scans printhead & alignment. Off all night. All the ink levels are good. Still has not corrected it.

  Print an entire page of the screen of the computer without problem. Printing problem just go flat.

  Hi @Wendy-needshelp,.

  Thanks for joining the Forums of HP Support for a solution to your problem copying.

  I understand that you use a HP Officejet Pro 8600 Premium e-all-in-one with a computer and Windows 7 when you copy from sometimes flat it will only copy and print 1/8 of the page. I would like to help.

  You mentioned having unplugged and replugged the power cord. This is something that could be done. If you can, I reset the power and try to connect the printer directly to a wall outlet, if you currently use a protector or electrical surge extention. Sometimes the surge protectors can limit the amout of the power supplied to the printer.

  

  There was an update firmware released in April, which can help your printer. You can download the update of the firmware and run it from your computer to install it on the printer. You can go to the HP Officejet Pro 8600 N911g_n Firmware download page by clicking here.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP 8630 don't print only one copy!

  I have a printer of HP all-in-one OfficeJet Pro 8630. When I had try to print several copies all I get is a copy and not multiple copies that I asked. I use a Mac with os x version 10. 7.5 and have used the software installation program. Any suggestions to solve this problem would be appreciated.

  Thank you

  Dup message sorry

• Odd - Print/print only one copy is grayed out for a specific PSD, so I can't print it!

  I have worked on a few images for a competition, a print and then to print, but the print menu option is grayed out. How is that possible? What would cause a Photoshop to "decide", it can not print a picture? How can I get around it?

  Photoshop CC 2015, Windows 10, Alienware M14x (16 GB of ram, Intel i7 - 3rd Gen), Epson R3000.

  Discovered the answer 'somehow' it had been converted to 32-bit, and when returned, the print options were available.

• HP Deskjet ink Advantage 3525: it will print but not scan or copy

  My Hp Deskjet Ink 3525 advantage will print but not copy or scan? I downloaded the latest software drivers, uninstalled and re-installed the prorgamme but nothing helped. Help, please. Thank you

  Rob

  Hello Citimba,

  On the main screen on the printer, press return, cancel, back, back button successively. You see Help menu, press the ok button, then use top / down arrow button to find the menu reset, reset complete semi selection and press the ok button.

  It's troubleshooting last step which I recommend. If this does not solve your problem unfortunately you will need to replace the printer.

  Say thank you by clicking on the Bravo thumb upwards in the post.
  If my post to fix your problem please mark it as an acceptable Solution

• Photosmart 8450 prints only black and white with the new Mac with OS 10.6

  I just bought a new Mac with OS 10.6.  (former was OS 10.5)  Now my Photosmart 8450 will print only in black and white.  I installed the single upgrade on the site of HP, no change.

  Is there an other update I need?

  You want to disable automatic session opening, which may be why it behaves in this way.

  Go to System Preferences

  Go to security

  Under "for all accounts on this computer", place a check mark next to 'turn off automatic connection.

  In addition, I do not know if you set a password for the test account, but put something simple as 123 - just something / anything.

  Once that is done, choose log in the Apple menu, or reboot. This should bring you to the login screen where you can specify the account to enter.

• Wireless printer prints only when it is plugged in power cord.

  Original title: printer

  I have a wireless printer and was working fine and then stopped printing, it will print only with the USB cord plugged. How can I make work with the USB cord.

  Hello

  What printer you are using?  What is you receive the exact error message?
  As many printers have specific installation instructions, I know that my HP needed me for not connect it first, and then click Print network opposed to USB settings then plugged into the USB port for installation and then just unplug the USB and WiFi, printing, once all installed and tested WiFi printing you can also print via USB , for me I could anyway.

  Just uninstall the driver and software and all re - install again.

  With printer (get the USB cable for the moment)

  To try this click Start > devices and printers > add a printer > add a network, wireless or Bluetooth printer > it will search a little, but I hope that your printer will display in the main window, if it is to highlight and click Next and follow the prompts to install the driver.

  You can check these sites

  http://www.printerhacks.com/How-do-i-make-my-printer-wireless/

  http://www.labnol.org/gadgets/make-wired-printer-wireless/12639/

• Photosmart 7510 prints only one page when I copy 2 sided-multipage document

  I have a two-sided 4-page document. I have placer place in autonatic tray, select Copy 2 head to head 2 and press "Black." All pages are scanned, but only one page (2 sides), one out. I expect all 4 pages 2 faces out. What's wrong?

  Thank you.

  You are right. This printer does not the ADF duplex scan. It will print a copy of the 2 sides but the face page of the first page front and back on the face of the first page printed copy pages and page of the face of the second duplex page on the back of the first page printed from copy. What a waste. Well, I need now to decide if I want to keep this printer or send it back since it's the LPB brand.

• DesignJet 500: DJ500 print only RGB from Indesign CC 2014

  Hello!

  I hope someone could help me with this problem. I am trying to print to my DJ500 from Indesign, but the only option for the output color is gray and RGB. If I print RGB colors are off, very dark. If I make a PDF and print from Acrobat Pro it works well.

  Any ideas for Indesign?

  Thank you!

  Hello

  Here's what I found

  https://helpx.Adobe.com/InDesign/using/color.html

• I have a printer HP Deskjet 3054 - when parsing it will be only a small part of what I want to scan

  my printer will scan only the upper left what whether I want to be scanned and I need a whole letter to scan. I went into the settings and there is nothing I can find that will help me. What can I do?

  Hi almarlane,

  What version of OS are you running?

  What application program that you use to scan (capture image scanning HP, ECT.)?

  Make sure you have selected the entire document by holding down the mouse button and drag over the area you're wanting to analyze before hitting the scan button. Here are some documents that help with scanning.

  How to perform a scan: OS X v10.8

  How to perform a scan: OS X v10.7