DesignJet 500: DJ500 print only RGB from Indesign CC 2014

Similar Questions

• Cannot print the booklet from InDesign to PDF

  I've upgraded to Acrobat 9.5.5, OS is Mountain Lion 10.8.5 and am trying to print a booklet from InDesign CS5. I can export regular documents very well, but when I'm in the book window and try to save it as a pdf, I get the message "the Save as PDF option in the printer dialogue don't is not supported." I read through the discussions earlier on Snow Leopard and much more, but haven't found the solution.

  Hi sperphoto,

  Please check the KB: http://helpx.adobe.com/x-productkb/multi/save-as-pdf-options-not.html

• DesignJet T120: Is printing only part of image T120

  I try to print a 17 "by 22" TIF file from a graphics program on my T120. I print on a 24 "roll, so I put the paper size to Super C/A2, which is 18 x 24. No matter how to position the image (centered on the paper, the upper left, etc.), landscape or portrait, or whether or not I put the margins, the image is always cut the same way: with 20% of the side left the printer off and about 20% of the upper part of the image not printed. What I am doing wrong? Here is a picture of the cut (top) image and the image full (below), both are Copyright (c) 2016 two generals games. :

  

  Hello

  If the image is in fact 17 x 22 you can use paper ARK C size.

  Make sure that the coding is clean and check the detected by the printer paper size

• No matter who was able to create an index in a provision fixed product ePub from inDesign CC 2014?

  inDesign exports currently my clue in "CO2" as a regular number:

  

  I tried a few tweaks to the code but have not been able to do things. I targeted the number "2" in "CO2" in the code and could change the size, but it seems no matter what I do I either end up with an exhibitor or number disappears completely. I tried a few negative percentages and the value of the property "sub" to move it to the bottom, but I can't get this right.

  span. {CharOverride-7

  Color: #000000;

  Police-family: Alegreya, serif;

  make-style: normal;

  Police-weight: normal;

  vertical-align: bottom;

  font size: 100px;

  }

  Here is the result of this last piece of code in my ePub.

  

  Does anyone know how to get a clue?

  Thank you!

  Hello

  Have you applied exposing through the Panel control or character of the fly out menu? I ask this because if you specified via the open type parameters, then it is not honored.

  Kind regards

  POOJA

• Designjet 500 proposed purple colors AutoCAD printing gray

  We used the Designjet for years and have several colors put in place to print gray and projected (252, 253, 254 and 25).  They have recently started with purple print.  I have run all diagnostics and calibrations and alignments available, and they are all good.  I looked at several troubleshooting sites and had no luck.  I use AutoCAD v 13.

  Assuming that the print heads are out of all the colors correctly, try this:

  The printer HP Designjet 500 and 800 series printers have a fix that was implemented in the version of firmware A.02.08 and higher. This hotfix provides additional media profiles that prevent blue to mauve color output change. This fix is only applicable to the series 500 and 800 and only if the printer has a version of firmware of A.02.08 or higher. Once the firmware has been upgraded, follow the steps below to make the appropriate changes in the Panel menu front printers:
  
  1.
  
  Highlight the menu paper icon on the display on the front panel of the printer and press ENTER.
  2.
  
  Scroll to the paper type and press ENTER.
  3.
  
  Highlight Enhanced colors and press ENTER.
  4.
  
  Select the type of paper there and then press ENTER.
  5.
  
  Press the Menu key to return to the normal display of front panel

• HP Designjet 500 42 "do not print

  Looking for help with my HP plotter. Recently, I replaced the service station and print transport. I also downloaded the driver (Driver HP DesignJet 500 PCL3GUI 32-bit) and firmware (series of printer HP Designjet 500, 510 and 800 Firmware Upgrade) to new pc XP from the original pc used for printing crashed. The printer displays indication normal and says ready for jobs however when I send a print to the printer it just shows treatment work and transport movements feeling left right at a few times, but the jobs do not print. Also, it seems to stay forever in this (suspended) mode and I have to power the printer off to return to the normal screen ready.

  What is a driver/firmware issue or hardware?

  If I try to print a configuration page it also does the same thing.

  Thanks in advance.

  Jacob

  It is a thin cable error. The ends of the cable have questions or it is not completely sitting in the cart. I guess the cable could be as bad.

• Designjet 500 prints on usb but not ethernet

  I inherited a DesignJet 500 printer 24 in. I can print so that I am related to him by a USB cable but when I try to set up on my network, I can't print to it across the network.  I can ping the JetDirect card and can telnet in as well so I know that I have the correct IP address and it the card itself can communicate with my network.  I use the same driver via the USB port and the network port but still unable to print over the network.  Any ideas why I can connect to the printer on my network, but I can't print on it unless I connected locally with a USB cable?  I tried with a laptop running XP32bit and Win7 64 bit with the same results.

  Thanks for the help.

  Thanks to the entrance to the Forum of commercial products.  BTW, I discover to my problem.  It looks like the problem was the cable used to connect to my network.  One of the things that I should have checked first, but don't have.  After replacing the cable, I was able to print from the network to it.

• Print from InDesign prints fine, but print after that exporting to PDF prints black as gray, low Image quality

  Hi all

  I have a printing problem going on with a document that I am currently trying to print.  When you export to PDF (high quality print or press quality setting, as well as to any possible color output) and then print, black my document go to the gray and the images look washed out.  This does not happen if I print directly from InDesign on my printer.  I tried to change the merger of transparent space, change the color profiles document and corresponding to export options to the options used when you print directly from ID, all without success. the document is always printed wrong when exporting to PDF first.  Any ideas why this might happen when exporting or printing to PDF, but not when you print directly from ID?  Thanks in advance for any help!

  I see.  Is there a way to ID artificially add CMY export in the same way as it does when sending to print?

  Is the destination of the document a composite digital printer or an offset press? If it is composite set your black preference for export fills and convert to RGB on export:

  

  

  In Acrobat, the two blacks will be 0. 0 | 0 RGB and will display the same

  

• Can't print PDF from InDesign after update Microsoft anni

  Hi all, since the anni update I was unable to print PDFS from InDesign. No matter if I put PDF for default printer or use the option "Microsoft in PDF format; what I get is: "printing error: Adobe Print Engine failed at the end of your data due to an unknown problem. Sometimes it will print a little less than half of a 60-page document and that's all - it fails (but I get a PDF of that half...). Sometimes, it just goes straight to the error.

  Anyone know what is happening on our how to fix? I have a deadline...

  See you soon

  Steve

  Hi Dov, thanks for the reply. As mentioned earlier in this thread, I use export when I want to send it to the printing press. However, at this point, I am willing to create a test that is reduced file size and allows me to put all 60 pages of the document in a gap of seven pages using the print option of 3 x 3 thumbnails per page. It gives me a manageable file to send to several people for the document of proof and, at this stage, the output of high quality is not necessary.

  However, I seem to have solved my problem:

  As mentioned, the document prints 1-27 on a 60 page document (print, failed on page 28).

  The paper would not print the range 27-60, when I tried later.

  The document will print 30-60 range.

  Therefore, the problem lies in pages 27 and 28. I've got rid of the pdf linked to two pages and tried work a print - it worked. then, of course, my problem lies in one of the PDFs linked to each page 27 or 28. It turns out that when I opened the linked PDF (sent to me as a PDF from another company as an advertisement) on page 28 in PS, PS automatically rasterized image, I recorded to a location different, re-related in InDesign, and guess what - it worked. I got the impression that I asked who had already failed.

  So, this boiled down to a single work of art linked PDF requiring a pixelation...

  All the best

  Steve

• Export from InDesign to PDF and the PDF file last updated is greater than one month and not easily print on letter paper is PDF presets?

  Hello

  I export from InDesign to PDF page is larger in the PDF file, and others I exported. This is because of the present PDF? One of the project managers is not able to print on 8.5 "x 11", but the InDesign document presets are the same as before. I wish I could download PDFs to show, but the newly exported PDF is greater than the version I created a month ago. I created a PDF file and the newly updated PDF file is almost un.5 inch wider with the export presets even. Any thoughts?

  

  

  Sadira00123456789 wrote:

  One of the project managers is not able to print on 8.5 "x 11", but the InDesign document presets are the same as before.

  I suspect the project manager has his copy of Reader/Acrobat simply set to print full size, rather than "Worthy" (assuming that the size of InDesign pages is truly 8.5 x 11).

  .. the newly updated PDF file is almost un.5 inch wider with the same export presets.

  This has nothing to do with export presets. How did determine you this difference of half inch?

• Print PDF from InDesign error

  Tried to print a 15 page InDesign document to PDF. The following error message was rerturned:

  -----------------------------------------------

  %% [ProductName: Distiller] %.

  %% [Page: 1] %.

  %% [Page: 2] %.

  %% [Page: 3] %.

  %% [Page: 4] %.

  %% [Page: 5] %.

  %% [Page: 6] %.

  %% [Page: 7] %.

  %% [Page: 8] %.

  %% [Error: ioerror;] [OffendingCommand: readstring] %.

  Battery:

  (Poeskon Μdy5ae2 › ¢ ÷fmo-Eioyj)

  øR½ = Ö¤ %% [Flushing: rest of job (end of file) will be ignored] %%.

  %% [Warning: PostScript error.] No PDF file produced. ] %%

  ----------------------------------------------------------

  I can go directly from word or scanning of documents in PDF format with no problems. However, I noticed that I have two instances of Acrobat Pro 11 under installed programs.

  1 adobe Systems, installed 14/05/2013, 1.93 GB, version 11.0.00

  2 adobe Systems Incorporated, version 14/05/2013, 1.85 GB, 11.0

  Maybe it's originally a sort of conflict but that you remove?

  Help, please.

  We need more information. What version of ID (including the updates installed)? What OS?  What are the settings?

  Why do you want to print to PDF instead of export? You lose a lot of distillation.

• HP Photosmart 7280 C: Jam printer when printing from InDesign

  I seem to be able to print anything, except when a print to InDesign file. When I try, I get a paper jam?

  Hello

  You use a different type of paper to print with InDesign? The program itself can cause the paper jam, but maybe the settings or the paper you are using are the cause of the problem. I often print on thicker or InDesign photo paper and usually just put a sheet in the printer at a time to help with jams and paper pick up questions.

  Please report parameters and the type of paper you are using to help find a solution. Thank you!

• HP Designjet 500 42: Old problem of driver update

  Hello

  I have HP Designjet 500 printer 42 in. And I can't update the old drivers. I downloaded new drivers drivers

  Installed new drivers and the printer connected to the computer. Installed printer itself. Driver version but check it shows in 6.08 (preferably printer-> subject) window.

  I deleted all drivers using pnputil.exe d Oem # .inf and printui/s/T2 orders. All the drivers of HP has been removed from

  C:\Windows\System32\DriverStore\FileRepository

  and

  C:\Windows\System32\spool\drivers\x64\3

  Installed new drivers (8.10) and pluged in the printer. Printer has been installed but with drivers 6.08. So I went to the "print management" as an administrator. Pressed on HP Designjet 500 42 by HP printer 'Manage sharing'-> "Advansed"-> "New driver"-> 'Disc' and in C:\Windows\System32\DriverStore\FileRepository I chose "dsgj510.inf_amd64_* *" folder and the dsgj510.inf file here. But could not find "HP Designjet 500 printer 42 in.". Here only:

  HP Designjet 500 42 + HPGL2 card; HP Designjet 500 plus 42; HP Designjet 500ps plus 42; HP Designjet 500PS42 + HPGL2 card; HP Designjet 510 42 inch printer and HP Designjet 510ps 42-inch printer.

  I tried to use HP Designjet 500 42 + HPGL2 card HP Designjet 500 plus 42 drivers. But printer would give an error message and do not print.

  With the help of the 6.08 driver version I can print from some software, but I need to print from AutoCAD. And AutoCAD gives me the error message "no: cannot use this configuration of tracer for one of the following reasons: the driver is not found, cannot find the device or the driver has a problem." No device has been substituted. "And I can't choose the HP designjet 500 printer in AutoCAD.

  It is a shared printer and other computers on the network have 8.10 drivers and can print from AutoCAD. Single computer, the printer is pluged cannot print because it driver 6.08.

  I found the problem.

  On the page under 10 64-bit windows this is only "HP Designjet 500 and 510 HP-GL/2 and HP RTL driver 64 bit" 8.10 drivers. And this driver is not HP Designjet 500 printer 42-inch drivers. But under 64-bit windows 8, here's two pilots. "Driver HP DesignJet 500 PCL3GUI 64-bit" 8.10 drivers and same as above. This file have drivers for HP Designjet 500 printer 42 inches and runs under windows 10.

  If HP support lazy to put all work them drivers under windows 10 for HP Designjet 500 printer.

• DesignJet T520 36in: DesignJet T520 36in printing problem

  I have a banner that I created in Adobe InDesign CS6.  File is 12.2 MB.  The file was created 36 "x 70".  When I try to print in our T520 it will print only a small part of the left area of the bottom of the picture.

  I tried printing from, PS, ID, Preview, Acrobat, ArcGIS... all with the same result.  and using PDF, JPG, etc.

  I also tried the 34 x 68 thus configuration.

  It seems that if I select E papersize and tailored size, it begins to print across the width of the banner.  I would not waste the ink to see if it does not print the entire banner.

  So, best I can tell, something goes wrong, after that I will more than 44 inches in length on the banner.

  Any thoughts on how to get the full banner to print?  Thank you!

  Really not an expert in this area but what happens if you reverse your size settings.  Instead of 36 X 70 have it size 70 X 36 as the printer maybe is the thought that the 70 is the width it cannot the printer.

• HP designjet 500 plus network problem

  Hello

  I'll need your help. I have the HP designjet 500 printer more and today I bought the HP JET DIRECT 620N NETWORK CARD. I installed inside the socket, connecting the card with an ethernet to pc cable. I went to the installation of hp on the monitor, select Yes for cfg network, ip and dhcp, I reboot the tracer and in the monitor shows he gets the local IP 192.168.1.2 as well as info from rest, which is are in conflict with other devices on the network. The problem is that im trying to find the printer over the network connections on my windows xp pro, but it does not show on the results. I don't see that there is an icon that does not give me an error. I also tried to see my tracer of the firefox browser with the local IP which has achieved and open the menu normally, showing how the network works. I tried several times to reboot pc and tracer in case they are blocked, but got the same problem. Perhaps there is a driver for win xp to see the plotter on LAN? I need to have your help as soon as possible, because a lot of work to do with the tracer and this question comes back to me.

  PS I should mention that I currently have a network with 3 pc the on the Office that they link together without any problem.

  P.S. This thread has been moved to printers - LaserJet for printers - Designjet & large Format. Forum Moderator - HP

  First off there are 2 homes EIO to the back, so you messed up there. With the power off, install the gl2 card in another location and see if you still have the problem. There may be a plaque on the slot, held in place with a screw at the top and bottom. Just remove the 2 screws and remove the cover and install the card.