Info tech RSS

Similar Questions

• Reference Dell will not load xp. Info Tech 0x000000c2 (0 x 00000043, 0xDFB25000, 0 x 00000000, 0 x 00000000) tells me to disable the BIOS memory options

  Info Tech 0x000000c2 (0 x 00000043, 0xDFB25000, 0 x 00000000, 0 x 00000000) system search floppy witch, I did not. Cannot start in safe mode that is blue screen tells me to disable the BIOS memory options, but finding where to.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the full and exact error message on blue screen?

  In response to the questions above could help us help you better.

  If the system restarts after blue screen then use disable automatic restart on system failure option to stop automatic reboot.

  Here's how:

  1. turn on your computer and keep pressing the F8 key before Windows starts.
  2. now in the Advanced Boot Options, select disable automatic system failure reboot

• Portege Z30-A-12N - touchpad info/Tech doc. required

  Hello everyone,

  I would like to get technical information as much as possible on (my) laptop Portege Z30-A-12N computer touchpad.
  I am a Linux developer and I would like to add the support of the ALPS touchpad at the core, however, it seems
  quite difficult to get hold of all documentation Tech.

  So far, the only things I know is that the touchpad signals to kernel (via the E7 and EC PS/2 commands) so:
  E7 = 03 73 0 a., EC = b3 88 22

  In particular, I need to know the model of the device, the ALPS PS/2 used and as much on Protocol version
  the features of the device as possible.

  Does anyone have more information?
  Or you could point me to?
  Any help much appreciated.

  Details on my laptop:
  Toshiba Portege Z30-A-N12
  S/N: YD111643H

  Thank you

  vencik

  Buddy, I'm afraid that's not m put these questions.
  First of all the touchpad isn't designed by Toshiba but 3rd party manufacturer: I guess its Synaptics or Alps.
  In my opinion you should consult touchpad manufacturer/supplier for information

• Satellite L350 - BSOD during the recovery and missing "BOOTMGR"

  Hello
  I have a Satellite L350, Vista Home premium SP1, (had it for about 4months)

  Yesterday I received an error black screen on my laptop it says to reboot, so I did, then just, my laptop wouldn't stat more, I have no idea why?

  So I put in my computer come with recovery disks laptop just reinstall every thing as if I just got it out of the box and I followed the instructions that the Recovery Wizard disk Toshiba says, and as his 'adaptation of the files', I get say Blue error screen "a problem has been detected and windows has shut down to prevent damage to your computer DRIVER_IRQL_NOT_LESS_OR_EQUAL".

  And tell to reboot or what ever and just keep it.
  (Info tech: STOP: 0x000000D1 0x00000002, 0x00000000, 0x8D246FD7)
  (usbccgp.sys - address 8D246FD7 base at 8D23E000, Datestamp 47919053)

  Then I reboot my system and a black screen comes up saying "BOOTMGR missing".
  So now, I have nothing that works, I retried the disks but same error with blue screen.
  I also tried to make the atmosphere safe and decent here, nothing works.
  I m needs help!

  Thanks for reading, sorry for so much reading to do

  The reason why laptop doesn t start (error bootmgr) while the installation is stopped with a BSOD. If you need to reinstall the laptop again.

  It looks like a USB problem because I found this in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/945436/en-us

  If you have connected the external USB devices to the laptop, remove them.
  In the worst case, there is something wrong with the USB ports or controller and the motherboard must be exchanged.

• Cannot update windows via windows update Center. Numbers of message error 0 x 80248011, App name wuauclt.exe

  Please, I beg you, help me please I need this computer for my work and am already 1 day behind by logging into my company to do my job (I have Windows XP Version 2002 service pack 2)

  Not only can't update windows via the update enter but an error message continues to appear every minute that used to go.

  It says "wuauclt.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »

  If I click on th does not send or send error report this message keeps popping up. When I click the to see what data link, he said:

  "Error signature szAppName: wuauclt.exe szAppVer: 7.4.7600.226 szModName: szModVer esent.dll: 5.12600.2180 offset: 005d 424 '  Details of the declaration: this error report includes: observation information covers the status of wuauclt.exe when the problem occurred, the operating system version and used hardware and Protocol address Internet (IP) of your computer. etc, etc, etc.

  When I click on info tech I get

  Content error report the following files should be included in this error report: C:\DOCUME~1\Owner\ LOCALS~1\Temp\WER189a.dir00\wuauclt.exe.mdmp C:\DOCUME~1\Owner\ LOCALS~1\Temp\WER189a.dir00\appcompat.txt WER189a the number changes each time.

  So far, I ran McAfee, Microsoft Security Essentials and it keeps popping up. I still do not know what updates I need through the Update Center but could manually go and get service pack 3 by itself. I need to be able to use the center of update and do not have this message continues to flow upward.

  What I do?   Thank you so much Corina

  [Duplicate of http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f72cfbb1-1a82-4ebb-83e1-d28fa3151bf3]

• Don't know what updates I need through the center of update. And get the following error message popup every minute, wuauclt.exe.

  Please, I beg you, help me please I need this computer for my work and am already 1 day behind by logging into my company to do my job (I have Windows XP Version 2002 service pack 2)

  Not only can't update windows via the update enter but an error message continues to appear every minute that used to go.

  It says "wuauclt.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »

  If I click on th does not send or send error report this message keeps popping up. When I click the to see what data link, he said:

  "Error signature szAppName: wuauclt.exe szAppVer: 7.4.7600.226 szModName: szModVer esent.dll: 5.12600.2180 offset: 005d 424 '  Details of the declaration: this error report includes: observation information covers the status of wuauclt.exe when the problem occurred, the operating system version and used hardware and Protocol address Internet (IP) of your computer. etc, etc, etc.

  When I click on info tech I get

  Content error report the following files should be included in this error report: C:\DOCUME~1\Owner\ LOCALS~1\Temp\WER189a.dir00\wuauclt.exe.mdmp C:\DOCUME~1\Owner\ LOCALS~1\Temp\WER189a.dir00\appcompat.txt WER189a the number changes each time.

  So far, I ran McAfee, Microsoft Security Essentials and it keeps popping up. I still do not know what updates I need through the Update Center but could manually go and get service pack 3 by itself. I need to be able to use the center of update and do not have this message continues to flow upward.

  What I do?   Thank you so much Corina

  Hello

   

   

  Let us make the below listed methods and check if we still get the error message.

   

  Method 1.

  I would ask you to reset the Windows UPdate components and check if you still get this error message.

  Click the Fix It button in the article below to do it automatically or you can do it manually as wel. For more information, refer to the article below.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

   

   

  Method 2.
  If the error still persists please provide us with the error log:
  Type eventvwr.msc/s in the address bar.
  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

   

  Method 3.

  I would also recommend to install the Windows Update Agent to manage the updates on your computer.

  Download and install the Windows Update Agent to manage updates for your computer.
  Follow the link below to download and install Windows Update Agent:
  http://support.Microsoft.com/kb/949104

  
  Please let us know if this helps you resolve the problem or if assistance is needed.

  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BSOD - Stop 0x7B at startup

  Hello! can someone tell me what to do about this error. I get the blue screen with this Info Tech: * STOP: 0x0000007B (0xF8cB0528, oxc0000034, 0x00000000, 0x00000000). I can't do anything. I can't even at a command prompt. It will not go in safe mode or anything else on this screen. Thanks for any help!

  Hello

  something about the control of 0x7B bug is here:

  http://msdn.Microsoft.com/en-us/library/ff559218 (v = VS. 85) .aspx

  (bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup)

  only what you can try - run the "chkdsk/r" command at the command prompt and because you can not run the 'Safe mode', you must use your Windows XP installation disk , boot from this CD and go into "Recovery Console".

  How to run the "Recovery Console" is here:

  http://support.Microsoft.com/kb/314058

  (Option 2: from the Windows XP CD-ROM Windows Recovery Console)

  LC

• error Stop: 0x000000f4 (0 x 00000003, 0x89877da0, 0x89877f14, 0x806057d6)

  Monday, I got a (blue) stop error screen (see the title for info tech) indicating the cause was a "Cricial to my operating system a unexpecedly process or thread you quit or been terminated and it was 'Dumping physical memory'.»

  Well, my comp. had been on all night, so God knows when it appeared? It goes without saying... I freaked! A holiday, so no one was around help & get answers from the Internet is a joke. In any case...

  I tried God knows what? LOL and today I have a blue screen stating, the problem seems to be caused by the following file:

  Setupdd.sys-PAGE_FAULT_IN_NONPAGED_AREA

  Tech Info: STOP: 0 x 00000050 (0XB046c4DA, 0 x 0, 0000000 00000000, 0XF747ACAD)

  Setupdd.sys - address F747ACAD BASE AT F744E000, DateStamp 41107C8F

  Help, please?

  NOTE: I remember that the last two times it updated there was something that could not download, but I just closed it. Silly me... Then I saw on the Microsoft Web site after June that 2011 Xp will not opperate. This is what happened?

  Well, I still have the Professional program for Windows Xp disk, I was just hoping that I don't lose my other programs. It would be two times I lost Microsoft Streets & Trips, he came with only 2 applications. and I'll assume that I'll lose my desktop program that I use in my business every day (which I can't replace)

  Hope to hear from you soon... RB

  Hello

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. it is a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.

• Blue screen of death. STOP: 0X000000C2 (0 X 00000043, 0XE00A5000, 0X00000000, 0X00000000)

  The blue screen of *.

  He told me to make sure any new hardware or software is properly installed. No new software or hardware has been installed. Then he said: If the problem persists, disable or remove any newly installed hard or software. And to disable BIOS memory options such as implementing caching or shading. If you need to use safe mode to remove or disable components restart, press f8 to select start adv. options safe mode. It does not work. At info tech STOP: 0x000000c2 (0 x 00000043, 0xe00a5000, 0 x 00000000, 0 x 00000000), the system is a Dell. You can start the system and press f12 and it says floppy diskette seek failure. Is not on disk. Press f1 screen windows xp, then the blue screen. Thanks Phil

  Hi Phil,

  It is more likely is a hardware failure that is causing the problem.

  ·         You have the external devices connected to the computer?

  Try the following and check if it helps.

  Method 1: Delete no matter what external device connected with the exception of the keyboard and the mouse, and then restart the computer.

  Method 2:

  Step 1: Try to start in last good known Configuration and see if you can start very well.

  How to start your computer by using last good known Windows XP Configuration

  Step 2: Start the computer in safe mode and check the number. Report of the results.

  You can also contact Dell for assistance with the material.

• Remote Desktop for Dummies...

  I found this forum...

  http://technopedia.Info/Tech/2006/05/09/Remote-Desktop-for-Dummies.HTML/comment-page-2#comment-166295

  So I followed the instructions and created a new host name.  I don't know what to do with it.  Is it wrong?

  Hi Yes,

  Remote Desktop, included with Windows XP Professional, allows you to connect to your computer over the Internet from any computer, Pocket PC or Smartphone. Once connected, Remote Desktop gives you the keyboard and mouse control of your computer while showing you everything that happens on the screen.

  For more information about configuring and using remote desktop in Windows XP, see get started using Windows XP Professional with remote desktop

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Uninstall programs and features

  I plan to UNINSTALL the following under PROGRAMS & FEATURES to IMPROVE SPEED & PERFORMANCE (even if the 320 GB HARD drive space is free) for loading FASTER B & W long movies on You Tube, etc., which are currently in me as long as 15-20 minutes (I don't have to send feedbacks and the indication is RARELY USED; I don't really need the function of CHECKING SPELLING; I NEVER DOWNLOADED anything online, or if I'm currently interested to this end; I know not casual that Orion is subject, but I used it "rarely" (but I'll reconsider it); I don't want to save anything on this particular PC (my gmail and yahoo are sufficient for now a few notes & reminders or documents); do not use the WebCam; (to double-check Acer eRecovery before uninstall); most of the SEVEN 7 Acer pre INSTALLED I can uninstall with caution).

  Could I safely UNINSTALL most programs/features below?  My main goal is to speed up the loading of movies, as explained above.  Please notify.

  Tool of feedback by Microsoft - installed on 20/10/2010 - RARELY USED - 4.59 MB of space

  Feedback tool by Microsoft - installed on 23/02/2010 - RARELY USED - 2.29 MB

  Support for dictionaries of spelling for Adobe Reader 9 - installed on 04/01/2010 - RARELY USED - 29.6 MB

  Windows Live Upload Tool - installed 16/04/2009 and the last used 16/04/2009 = NEVER actually used

  Orion Convesoft - installed on 04/01/2010 - RARELY USED - 15 MB

  NTI Media Maker 8 by new systems Info Tech - installed 16/04/2009 - LAST USED 4./16/2009 - RARELY USED - 183MO

  NTI Backup Now5 NTIS - installed 16/04/09 & LAST USE 16/04/09 - 30.4 MB

  Acer CrystalEye WebCam by Chicony Electronics

  Acer eRecovery

  Acer PowerSmart Manager

  Acer GridVista

  Acer registration

  Acer VCM

  Launch Manager, Acer Inc. - installed on 04/01/2010 - all SEVEN Acer programs/features INSTALLED 04/01/2010 for a total of 42 MB of space

  Intel(r) Graphics Media Accelerator DRIVER of Intel Corp. - installed on 04/01/2010 - 965 MB

  Your suggestions will be greatly appreciated.

  Joe

  Hello

  Follow these methods and check if that helps:

  Method 1:

  If you want to improve the performance of the computer, I suggest to run the troubleshooter of Performance and check if it helps:

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 2:

   

  Also offers to optimize Windows 7 for better performance and check if it helps.

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Method 3:

  And on the programs that you can safely uninstall are:

  (a) feedback by Microsoft tool

  (b) spelling dictionaries Support of Adobe Reader 9

  (c) Orion, by Convesoft. I looked and it is described as:
  "The PC Decrapifier is a program designed to remove or uninstall a specific list unwanted software in an unattended mode. It can be used to remove most of the annoying software are usually supplied with recent PC. »

  (d) NTI Media Maker 8 (this program allows you to save data, Blu - ray, audio, photos and video on CD and DVD.)

  I wouldn't say DRIVER you to uninstall Windows Live Upload Tool, utilities Acer and Intel (r) Graphics Media Accelerator of Intel Corp.

  See also:

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

• Hide taskbar displays behind pages in Vista

  When you use the taskbar "Auto hide" feature of the task bar do not display when a maximized application covers the taskbar. I think that {guess) the taskbar are on the rise and a decline because...}

  .. If I resize the app window to expose barely taskbar, that I can see the taskbar raise and lower on the passage of the mouse, BUT IT IS this BEHIND APP.

  ALL APPLICATIONS. INCLUDING THE EXPLORER, THE WEBPAGES IN CHROME AND IE9

  cannot determine exactly when it started, but 3 to 4 months ago auto masking has worked well. My computer windows 7 has no problem.

  If you wish more made computer info Tech me know.

  the pic is from the mouse to a taskbar hidden.

  solved

  im a jerk.
  Just check the box "keep the taskbar above other windows"
  don't see how I missed that. unless it's in the last round of updates
  very lucky

• gadget device can not find the driver

  Cable device ethernet/title: original gadget

  gadget device cannot pilot fid. trying to get 6100g modem to download info.tech said support model parameters are good and ethernet cable is good.

  Hi cqpper,

  You get the error message?

  I want to clarify if you try to download drivers for your modem 6100 g or other devices

  Please provide the full model number (and manufacturer) of your device.

  Method 1: You can run the fixit available in the link below and check to see if that makes a difference

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems

  Method 2: You can view the steps mentioned in the link below to update the drivers

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 2 errors cannot start the file missing PSHED.dll and a blue screen error 0x0000C1F5

  Hello

  A few moments ago I had to do a restore of the system for some reason forgotten but restoring interrupted when the power off when I tried to restart it gave me a chioce of such boot options that start normally start SafeMode etc... but when I choose one of them it is said that the PSHED.dll file is missing or currput so I put in my drive repair/install and reboot, but after the white bar has loaded and the green bar loads, it gives me a blue screen error with the info tech being 0x0000C1F5 and the rest are zero

  I have a gateway with windows Home premium 32-bit model and more recent material I instaled a grapics card xfx 9800gt nvidia and a new mouse, any help would be appreciated thanks

  -Renton

  Hello

  This error is somehow a special case:

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/946084

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer
  http://support.Microsoft.com/kb/970101/en-us

  Stop error when you start a Windows Vista-based computer, even though hotfix 946084 is installed on
  computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/958069/en-us

  Other methods:

  Workaround for STOP 0x0000C1F5 / 0xC1F5 / C1F5 / BSOD / CLFS. SYS / KB946084
  http://www.delmartian.com/nullpointers/workaround-for-stop-0x0000C1F5-0xC1F5-C1F5-BSOD-CLFS.sys-KB946084.html

  Easier to read same message
  http://BSODs.com/content/Windows-Vista-and-stop-0x0000C1F5-Linux-anyone

  SystemRescueCd
  http://SysRescCd.org/Main_Page

  Video fix
  http://www.YouTube.com/watch?v=Y_OjCkbZyTw

  Video Fix - Linux
  http://www.YouTube.com/watch?v=SwSvIhyZRVc

  ================================================

  For the most part, the BlueScreens (the above is a special case as noted)

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Call Blocker for BB Q10 and Q10 BlackBerry Call Recorder does not work

  It's quite funny how when you pay for the apps will not longer work.  I got call blocking for well over a year waiting for them that they told me that I must have 10.3 or higher to be able to use its features.  Well guess what I've been updated 10.3.1.1865 with OS 10.3.1.2708 and it does not block calls.  Call Recorder when free works well, but as soon as I paid for it and upgraded to the pro version it would not record the sound went dead silent.  If anyone has had these problems when trying to get intouch with developers is useless, because no one will send to you.

  Call Blocker is developed by Ajani Info Tech version 1.0.2.17 and Call Recorder is developed by appsforbb version 2.0.0.1.  Sure would like to hear from anyone with the same problems or solutions because it's frustrating.  Thank you.

  Just trying to see if there is someone who has a solution before I go to my service provider to request a refund, but thanks for the help but would still see if anyone has experienced the same problems and have got a solution.  If this isn't the case, I'll go through my supplier for a refund.

  @a wrote:

  This isn't good @rwhowes!

  If you have not already you may want to request a refund.

  From help please visit the site Web of Support of BlackBerry World. Thank you!