Initial installation of 6520-e printer

Similar Questions

• HP Photosmart 5500 series main: installation procedure for the printer software

  In my attempts to install the software of series of Prniner of 45510e-all-in-one Photosmart hp, I think that the process does not complete the installation of the software. After I clicked on that I accept the terms of the agreement, that he turns back to the ilnstall screen and a few seconds, it indicates the installation is complete. I don't think that the process is quick. It seems that there may be interrupted the process.

  In support of this contention, the printing software HP and doctor Scan shows the software seems incomplete and that there are problems of dirver.

  Can someone provide explanations that the question of the installation is deficient in this case, or that he really install this fast?

  Arthur

  The initial installation software for the HP Photsmart 5510 series was the correct software.  I finally resorted to re - install Windows 10. I was then able to uninstall properly the remains of the 5510 installs my computer which allowed somehow not all subsequent installations trying to finish. Unfortunately, the software would not overwrite the wrong files and it does not alert me to the fact that it was not complete installation.  It simply says that the installation is complete.  My guess is the ultimate failure of the procedure was the result of some entries in the REGISTRY, creating a conflict with the installation and full installation process was abandoned.

  The process automated to re - install then took place without a hitch and all the functions of the printer now appear to work as expected.

  I think that an option in the installation process to allow overwrite existing software on the computer may well have solved this problem without pain. The alternative that I had to go through has been extremely laborious and frustrating.

  ArthurmB

• should my time capsule be connected with a cable for backups, after the initial installation?

  should my time capsule be connected with a cable for backups, after the initial installation?

  If you mean that you have to keep your Mac connected to a Time Capsule via Ethernet for future backups, then the answer is no. Time Machine and time Capsule are designed to work over wireless for your Mac would just need to be connected to the wireless network provided by the time Capsule.

• Cannot connect HP 6520 wireless printer to my network.

  Unable to connect wireless HP 6520 network printer, wireless or via USB of Airport Extreme base.  End of 2014 iMac, 24 Gig of RAM, 1 TB of merger, El Capitan 10.11.4 drive; Last generation airport extreme network (ethernet) for a second Airport extreme, which in turn is connected to an Airport Express and also connected to a 2nd Airport Express wireless.

  Have you plugged the printer on the computer directly and made sure it works thus insured that you have the correct drivers for it?

  Try using wireless as it works much better than USB.

  The closest airport to the location of the printer, turn on WPS to printer via the airport utility.

  Do not use the PIN method... HP printers will not pin code work, you must use the first attempt. Then on the printer itself less than 1 min start the WPS connection for the wireless...

  Tell me if it does not work.

• HP Laserjet installation on Windows 2012 print server

  Hello Forums HP

  I try to add a Hp Laserjet P4515 on a Server Windows 2012 print and update its parameters to itself all 6 trays installed.

  I realized that on a Windows Server 2003 print using HP PCL 5 universal print drivers by using the Automatic Configuration under device settings option in the printer properties. However, following the same procedure on the server of 2012 option Update configuration is missing.

  I left the configuration of the printer automatically select the driver which is listed as HP LaserJet P4515 PCL6 on the name of the driver class and Micorsoft Point and print on the Advanced tab.

  Does anyone know how to get the driver to update the config?

  Regards,

  Cam

  I finally got this working. Remove the printer and starting from scratch.

  I have downlaoded 32-bit and 64-bit drivers PCL6 and extracts into a folder. Started the installation of the new printer manually and unchecked the box detect automatically the driver. Come in 64 bit location extracted folder and allow the driver to install manually. When installation is completed I went the printer properties/sharing tab and select additional drivers and checked the x 86 button. Then, said the browser in the 32-bit extracted folder.

• Has made a new installation, now Dell 962 printer will work not (Win7)

  So all of the facts are:

  I got a virus on my computer of who knows where. Whatever she is, she decided to remove part of my hard drive. So I had a few antivirus and anti-malware programs, and they did too good a job - I damaged my registry.

  If I had no other choice, but do a re-install. I didn't do a new installation; This is the option where all he moved to Windows.old. If the computer is good again, except that my printer is not working correctly.

  First, I tried the drivers from the Web site. I tried R151565, which should have done the job. This configuration is behaving oddly, however. It is scheduled to end after he installed the All in One Center, and it is supposed to leave me with a printer that works. This isn't.

  Then, since it was a re - install, I had to install updates. An update of the driver from dell was one of them. So I thought that this would solve things. The update was successful, but my printer is not installed.

  It never happened to me. The printer is not compatible, or it works. This feels like the printer is in limbo. So, I tried to think about what might be wrong. I looked in devices and printers, and there that caveat to sign on my printer. Then I looked in the devices, and I noticed this strange thing

  

  Why do I have two entries for a printer? This must be an allusion to the problem, but I do not know the answer. I imagine that there must be at least one person who has encountered this kind of problems. Please, help me. Research has brought me here many times, but I could not find a solution that matches my problem

  Hi KenLJ,

  Thanks for writing on the Dell Community Forum.

  We recommend doing a clean install of the operating system. Asking you to back up data from the Windows.old folder. Please use this link http://dell.to/1sU6QJ3 to restore your Windows 7 computer to factory settings. If this option does not work, then you can manually reinstall Windows 7 using this link http://dell.to/1mN6P6v. If you want the printer don't work, please uninstall the printer driver. Unplug the printer from the computer. Download the printer driver from this link http://dell.to/1IXOCus and install it. Connect the cable from the printer to the system only when the system prompts you to connect the cable. Continue with the installation, and it would print the test page once it is installed. There are two entries in the Device Manager, one for the scanner and the other is for the printer.

  Answer please if you have any other questions.

• Win 7 hangs during initial installation, asking drivers...

  I'm trying to do a full, clean install on a new generation of PC desktop.  The following are new & just bought today:
  OS: Brand new retail Windows7 Ultimate (not the version of upgrade)
  Motherboard: ASUS P5Q Deluxe (Intel P45 chipset)
  HARD drive: Western Digital (literally brand new, out of the box... never been used or put in shape)

  The problem that I must sound familiar... initial installation block asking drivers (insert the CD/DVD or a USB device with missing drivers).

  -J' have already been on the site of Asus and downloaded the latest drivers SATA Win7 and Intel.
  -None of the pilots comes to me to get past this problem.
  -The BIOS is the last
  -I try not to use RAID functions
  -SATA is set to "AHCI" in the BIOS Setup... another choice is "IDE" with submenus of "Compatible" & "Improved"... the result is the same in all settings.

  Any advice would be greatly appreciated, as I'm currently dead in the water and have dropped more than $1000 & spent more than 7 hours of my time to this today.

  OK, so a couple of things here...

  First of all, thanks to Aziz to try to answer my question, but I respectfully hope that in the future you would read posts more carefully before you answer...

  You wrote:
  - "Try changing the SATA drive to IDE in BIOS and try installing Windows 7"
  .. When in my original post, I said:
  - "SATA is set to"AHCI"in the BIOS Setup... another choice is"IDE"with submenus of"Compatible"&"Enhanced"... the result is the same in all settings ." ".

  You also then have detailed a series of steps that could only be applied if the operating system has been installed & Starter.  I think it should be clear in my description of the problem that I was not able to get anywhere near that far...
  ".. .initial install hangs, asking drivers (insert the CD/DVD or a USB device with missing drivers) ." »

  In the end, I was able to get things to work & I wanted to share my solution for those who can be useful...  For some reason, the "clean install" (NOT an upgrade) Win7 process would literally see my IDE DVD drive during the first installation process.  Obviously, BIOS could see the DVD player, as he was able to Start from the DVD drive... but during the initial installation, it seems that the DVD player simply ceased to be accessible.  Even now, I'm not sure if this was due to some kind of motherboard problem, or maybe a compatibility problem between Windows 7 and my DVD player specific or whatever... the main cause remains a mystery.  I tried all settings possible jumpers on the drive itself (master, slave, cable select, no rider in all, etc)... all to nothing does not.  It is / was not a disk of old, obsolete... it was purchased last year.  I remain puzzled about what has increased.

  Anyway, I knew that the problem was somehow linked to access to the DVD player, I decided to try a SATA DVD drive rather than I had been using the IDE hard drive.  So, I bought a new SATA DVD drive to install in my machine, and finally everything worked well.  Again, I don't know always with certainty what the problem was.  It is possible that I could have bought another IDE DVD drive & tried that instead... that may have worked also, but since I didn't try it, I can't be sure.

  Good luck to other similar questions & I hope this helps.

• Windows cannot print due to a problem with the installation of the current printer.

  Thread title: Epson TX235W will not print

  When I click on 'print', I get the print control. the box that tells the printer how many copies, etc.  When I toast 'print' it get a little box that says Windows cannot print due to a problem with the installation of the current printer.  Try one of the following:

  Check the printer by printing a Windows test page

  Ensure that the printer is online and on

  Reinstall the printer driver

  I did everything above and I get the same result.

  Help!

  Hello

  Did you of recent changes made to your computer that caused the problem?

  This problem is limited to a particular application?

  How is the printer connected?

  Method 1) restart the print spooler service and delete the print queue

  Start the print spooler service in the Services console

  1. Click Start and run, type services.msc, and then click OK.
  2. Right click on the print spooler service, and then click on stop.
  3. Right click on the print spooler service and then click Start.

  Start the spooler service for printing at the command prompt

  1. Click Start, run, type cmd, and then click OK.
  2. Type the following commands at the command prompt:

     net stop spooler
     net start spooler
     Output

  Note: Press ENTER after each command line.

  Cancel printing

  http://Windows.Microsoft.com/en-us/Windows-Vista/cancel-printing

  Method 2) remove and add the printer and then check.

  Add or remove a printer (Applicable for Windows 7)

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  It will be useful.

• Windows 7 cannot print - "Windows cannot print due to a problem with the installation of the current printer"

  Window 7, Lexmark 1300 series. Cannot print. When you try to print from Notepad, the error message is "the system cannot find the file specified." What impression of the word is "Windows cannot print due to a problem with the installation of the current printer" have uninstalled and reinstalled all printers in many times. Removed the Lexmark 1300 in the registry and reinstalled. No change. Ran sfc/scannnow several times. Microsoft Fixit print detected no problems. Help, please.

  Hi Baccy138,

  See the methods mentioned below and check:
  Diagnose and automatically fix the Windows USB problems
  http://support.Microsoft.com/mats/Windows_USB_diagnostics/
   
  Try to download and update the drivers manually from this site:
  http://support.Lexmark.com/index?segment=support&UserLocale=en_US&locale=en&ProductCode=LEXMARK_Z1300&page=product&FromPage=null#1
  1. click on the above link and click the menu drop down and select Windows.
  2. Select the version of operating system like Windows 7 and check the bit as a result.
  3. Download complete drivers and install it.
   
  Hope this information helps.

• [INS-30131] Failure of initial installation is necessary for the performance of the controls of the installer.

  Hi all

  12 c

  Win7 64 bit

  I install 12 c, but I encountered error:

  

  [INS-30131] Failure of initial installation is necessary for the performance of the controls of the installer.

  Cause - failed to access the temporary location.

  
  

  Action - make sure that the current user has required permissions to the temporary location.

  Additional information:

  Details of the exception - GLWB-11322: one or more node names 'oracle_training' contains one or more invalid characters following "_".

  
  

  What temp file should grant permissions to?

  Thank you very much

  JC

  Hello

  Details of the exception - GLWB-11322: one or more node names 'oracle_training' contains one or more invalid characters following "_".

  Line underscore or annoying characters on your node name cause problem. What is the name of node? Please change it will solve the problem.

  Current version 12101 is to have this constraint. See MOS: 1957895.1

  -Pavan Kumar N

• I bought a genuine product Adobe Creative Suite 6 Design Standard about 3 years ago. After the initial installation (with serial number) applications worked well (Photoshop, Illustrator, Acrobat, etc.). However, I could only use Acrobat to a fe

  I bought a genuine product Adobe Creative Suite 6 Design Standard about 3 years ago. After the initial installation (with serial number) applications worked well (Photoshop, Illustrator, Acrobat, etc.). However, I could only use Acrobat a few weeks before the software did not react more. After this time all pdf files can be manually opened with Adobe Reader, but not with Acrobat. Because Acrobat seems to be the default program to open pdf files, nothig happens if I double click on a pdf file, or if a pdf file to be generated from a site Web etc. At the beginning, I was able to reinstall Acrobat from the CD and it would work for a few weeks yet. This has been the case for the past three years. Now, even the resettlement option no longer works and the error message "Is not a real product from Adobe" is displayed during installation. As I said, all the other parts (Illustrator, Photoshop...) work fine and I don't have a product code, serial number etc. What could be the problem and how can I solve this problem? When I uninstall Acrobat, all PDFs open automatically via the Adobe Reader software. But I need more than just to read a PDF file. Help, please!

  Hi Andreas,

  Try the fix mentioned in the KB: https://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html

  Kind regards
  Rave

• Failure of the initial installation of INS-30131 required for execution of the controls of the installer cannot access the temporary location

  When I install Oracle Grid Infrastructure 12 c Release 1 (12.1.0.1.0), I have the following error:

  Failure of the initial installation of INS-30131 required for execution of the controls of the installer cannot access the temporary location

  Cause:-unable to access the temporary location

  Action - make sure that the current user has required permissions to the temporary location

  Details of the addition

  -GLWB-1560: "/tmp/" temporary directory path is shared on the nodes '... »

  The oracle user I use is to have access in / tmp, I did a test by creating a file here.

  Any idea?

  Thank you

  This is the description of the error, I saw, but he was trying to find an idea how to solve this problem.

  Anyway, I solved it by renaming the Group of volumes and accordingly update the fstab and the grub.conf.

  Thank you

  Eugen

• When I open it gets stuck on "initializing installation" and the green bar does not move. How can I fix it so it installs?

  The installation program of Adobe cloud downloaded on the internet perfectly but when I open it stuck at "initializing installation" and the green bar does not move. How can I fix it so it installs?

  Multiredwolf123 did you use the steps listed in the "Failed to install" error request Creative Cloud Desktop - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html to solve the current error?

• How to re - install Photoshop CC after initial installation?

  How to re - install Photoshop CC after initial installation?

  Run the cleanup tool to remove Ps CC:http://www.adobe.com/support/contact/cscleanertool.html . Restart the computer and then try to reinstall the Ps.

  Kind regards

  Ashutosh

• OfficeJet 4615: Officejet 4615 stuck on "Print alignment Page" during the initial installation

  sharpen the printer begins to print page alagin and stuck

  the printer, printing from the computer

  I update the firmware and I do hardreset

  Hello @menybiton ,

  Welcome to the forums of HP.

  I understand that your printer is stuck on the print alignment page.

  I want to help you.

  I would like to remove the ink cartridges.

  Then another hard reset of preforms.

  When the printer asks the missing cartridges, reinstall them.