Similar Questions

• Maybe it's to rewrite the BIOS with crisis recovery mode?

  Hey everybody,

  my laptop 'freezes' during BIOS 'PHOENIX' updated 2 years ago.
  SERVICE told to change the motherboard, the price as new pc, so I bought new laptop.

  I keep looking at the toshiba forum always, so I read a lot of information on the MODE of RECOVERY from CRISIS.
  so I tried to check my laptop died after 2 years.

  My satellite M100 starts in crisis recovery mode Fn + B.
  my laptop starts up to CRISIS MODE, but do not read the USB STICK
  I did the flash with the CRISDISK 1.0.0.4 USB key program, but I'm not sure I did it way right!

  My question is:
  is it really possible to REWRITE the bios with crisis recovery mode, where I can read more information on how to do it.

  I want back my M100 :)))

  Hey,.

  As Akuma writes that you should try a USB FDD instead a USB key. Key USB is supported only on new models of laptops, but as far as I know USB FDD will be always supported.

  In any case, just for your information: you should know what you're doing. It is a delicate and risky procedure and in the worst cases you might destroy the whole ROM module but if you already have a new laptop I think that it s a problem for you. ;)

• Hi there was a call today from someone saying they were Microsoft and there was a problem with our computer

  Hi there was a call today from someone saying they were Microsoft and there was a problem with our computer is full of viruses.
  After a long session by phone, Gerard I would like to check the status of our security and asked for a number to call them back.
  the appellant appeared to try to sell a security system, still called aammy said he called on your behalf, I don't call back, but am worried about the security of our information on the pc.
  who is George

  Please see no such response above and also the following sticky thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/i-received-a-phone-callemail-from-someone-saying/98a199f4-82cd-4433-b333-045451b89e2d

• Switch Cisco 2960/3560 = > recovery password and default settings with the button Mode

  Hi Experts,

  I have some confusion with the button Mode with cisco 2960/3560 switches.

  I read on many forums and articles, but where things are not clear.

  a place given 3 seconds and somewhere is given 7 or 10 seconds.

  Qus1), what is the exact time to press/hold Mode button to perform two following tasks:

  A. password recovery (according to my knowledge 3 sec) good or bad?

  Configuration of the switch (start + run) would be safe

  After the recovery of password? Yes or no

  B. factory default (according to my knowledge 10 dry) good or bad?

  I'm afraid, because if I press mode button more than 3 seconds, then

  It will delete any configuration of cisco switch. Yes or no

  Qus2) I want to recover the catalyst 2960/3560 switch password without

  Start/run configuration to lose. That is my main concern.

  Please tell me how to do this, what will be the time keeping Mode buttom

  in a few seconds?

  Qus3) which means this line

  "If the password recovery mechanism is disabled in switch

  then you will lose all the config.

  This sentence has been given on this forum url

  https://supportforums.Cisco.com/thread/140848

  KS

  Attach a terminal or PC with terminal emulation (for example, Hyper Terminal) port console switch.

  Use the following terminal settings:

  • Bits per second (baud): 9600

  • Data bits: 8

  • Parity: None

  • Stop bits: 1

  • Flow control: Xon/Xoff

  Note: For more information on the wiring and connection of a terminal to the console port, refer to connecting a Terminal to the Console Port of Catalyst switches.

  Unplug the power cable.

  The power switch and take it to the switch: command prompt:

  2900XL, 3500XL, 2940, 2950, 2960, 2970, 3550, 3560, and 3750 switches of the series, to do this:

  Press and hold the mode button located on the left side of the façade, while you reconnect the power cable from the switch.

  2960, 2970

  Release the Mode button when the SYSTEM LED flashes orange and then turns green. When you release the Mode button, the SYSTEM LED flashes green.

  3560, 3750

  Release the Mode button after about 15 seconds when the SYSTEM LED turns green. When you release the Mode button, the SYSTEM LED flashes green.

  The system was interrupted before the flash at the end file system initialization

  loading the operating system software:

  flash_init

  load_helper

  boot

  switch:

  Run the flash_init command.

  switch: flash_init Initializing Flash... flashfs[0]: 143 files, 4 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 3612672 flashfs[0]: Bytes used: 2729472 flashfs[0]: Bytes available: 883200 flashfs[0]: flashfs fsck took 86 seconds ....done Initializing Flash. Boot Sector Filesystem (bs:) installed, fsid: 3 Parameter Block Filesystem (pb:) installed, fsid: 4 switch: !--- This output is from a 2900XL switch. Output from !--- other switches will vary slightly.

  Run the load_helper command.

  switch: load_helper switch:

  Question the dir flash: command.

  Note: Be sure to type a colon ":" after the dir flash.

  Appears in the file system of the switch:

  switch: dir flash: Directory of flash:/ 2    -rwx  1803357                  c3500xl-c3h2s-mz.120-5.WC7.bin !--- This is the current version of software. 4    -rwx  1131                     config.text !--- This is the configuration file. 5    -rwx  109                      info 6    -rwx  389                      env_vars 7    drwx  640                      html 18   -rwx  109                      info.ver 403968 bytes available (3208704 bytes used) switch: !--- This output is from a 3500XL switch. Output from !--- other switches will vary slightly.

  Type rename flash: flash: config.old config.text to rename the configuration file.

  switch: rename flash:config.text flash:config.old switch: !--- The config.text file contains the password !--- definition.

  Issue the boot command to boot the system.

  switch: boot Loading "flash:c3500xl-c3h2s-mz.120-5.WC7.bin"...############################### ################################################################################ ###################################################################### File "flash:c3500xl-c3h2s-mz.120-5.WC7.bin" uncompressed and installed, entry po int: 0x3000 executing... !--- Output suppressed. !--- This output is from a 3500XL switch. Output from other switches !--- will vary slightly.

  Enter "n" at the prompt to abort the initial configuration dialog box.

  --- System Configuration Dialog --- At any point you may enter a question mark '?' for help. Use ctrl-c to abort configuration dialog at any prompt. Default settings are in square brackets '[]'. Continue with configuration dialog? [yes/no]: n !--- Type "n" for no. Press RETURN to get started. !--- Press Return or Enter. Switch> !--- The Switch> prompt is displayed.

  At the switch prompt, type en to enter a mode.

  Switch>en Switch#

  Password recovery

  Type rename flash: config.old flash: config.text to rename the configuration file with its original name.

  Switch#rename flash:config.old flash:config.text Destination filename [config.text] !--- Press Return or Enter. Switch#

  Copy the configuration file in the memory.

  Switch#copy flash:config.text system:running-config Destination filename [running-config]? !--- Press Return or Enter. 1131 bytes copied in 0.760 secs Sw1#

  The configuration file is now reloaded.

  Replace the current passwords that you do not know. Choose a password with at least one capital letter, one number and one special character.

  Note: Replace passwords that are required. You must crush not all passwords listed.

  Sw1# conf t !--- To overwrite existing secret password Sw1(config)#enable secret !--- To overwrite existing enable password Sw1(config)#enable password !--- To overwrite existing vty password Sw1(config)#line vty 0 15 Sw1(config-line)#password Sw1(config-line)#login !--- To overwrite existing console password Sw1(config-line)#line con 0 Sw1(config-line)#password 

  Write the running configuration in the configuration file with the write memory command.

  Sw1#write memory Building configuration... [OK] Sw1#

  For factory reset:

  do not give under the control of factory reset

  Switch#copy flash:config.text system:running-config

  can I copy the running configuration to Flash

  Switch flash running-config #copy:

  Destination file name [running-config]?

  Building configuration...

  [OK]

  Switch #copy running-config startup-config

  Name of destination file [startup-config]?

  Building configuration...

  [OK]

  Review the link for more information below

  http://www.Cisco.com/en/us/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml

  Please note the useful messages.

  Concerning
  Vesta
  "Everybody is genius." But if you judge a fish by its ability to climb on a tree, he will live his entire life, believing that this is stupid. "

• Spend first 2.2 to 3.0 - what is happening with our licenses?

  Hello

  Our client asked us to upgrade first the first 3.0 2.2. Procedure seems very easy (http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/q...), but my question is what is happening with our licenses.

  This first manages a few WLC with their AP and we have a Base license and life cycle of both with 100 to 150 (screenshot) devices attached. These licenses will be ok for first 3.0 or they will cease to work? In this case, Cisco will provide us with the equivalent license (toll-free) or we will have to purchese one another?

  Thank you very much!

  David

  2.2 IP licenses will continue to work without modification on the PI 3.0 server.

  I've done a few upgrades and it can confirm first-hand experience. It is also how it was designed to work according to the team of Cisco products.

• Problems with our internet connection

  Hello, I have a all in one HP touchsmart PC (running windows 7), and he has problems with our internet connection. I dot know if it is in the right section, but this seems to be the best in the class.

  The rest of my house to connect to our router fine (iphone, iPad, computer laptop) except this PC. I CAN connect to the router, but 5 minutes or later, he has a X red on the connection and said "the settings saved on this computer do not match the requirements for the network" I looked everywhere online for this, but it remains stubbornly disconnects every time.

  I tried to delete the network and try again, but he still has a red X and the message more each time. I tried to connect and Ethernet cable, still no luck. I am very desperate to solve this problem, because it's what I use for games. Can someone help me please? It would mean the world to me if someone could help me solve this problem.

  If you don't mind keeping this Ethernet cable connected, you might have a solid connection if you come to turn off the wifi connection completely and rely only on the cable.

  Here's how:

  1. Press on + R to display the run box, type ncpa.cpl , and then press OK.
  2. Right click on the wireless network connection and choose disable.

  That's all.  You can always reactivate if you wish.

• In our Production, we can share the password of user of database 'Apps' with our consultants functional, although they would like to examine through fields by (help > Diagnostics > review) and here he asked the password of the user "APPS".

  In our Production, we can share the password of user of database 'Apps' with our consultants functional, although they would like to examine through fields by (help > Diagnostics > review) and here he asked the password of the user "APPS". We need to know the path where they can examine the field without knowing the password for user "apps".

  Check

  How to enforce password Protection to access the Menu help > Diagnostics > review? (Doc ID 1487534.1)

• Problems with the Tablet mode

  I have problems with the Tablet mode when the display on a shelf. If you visit the Web site on landscape, then everything fits perfectly on the screen however if you view on portrait then it does not. How to solve this?

  You must define a new braking point and design that matches the portrait view.

• Binary translation is incompatible with the long mode on this platform. Windows 7, processor intel core i5

  I install VMware Workstation 12.1.1 Player for Windows 64-bit operating systems on Lenovo intel core i5 Windows 7.

  I have a copy of VM for HP Quality Center with the VirXPSP3.vmx file and the environment.

  When I try to open the Workstation Player vmx file:

  (1) I got prompt that machine virtual seem to be an option to take possession and use

  2) after taking possession, I try to play the virtual machine, I got a prompt with "binary translation is incompatible with the long mode on this platform. Long mod will be disabled in the virtual environment and application requiring long mode does not work correctly as well. See http://vmware.com/info?id=152 for more details. »

  Link is on this page: system required to install an operating system 64-bit on a 32-bit host (1003945) client. VMware KB

  Host is definitely 64 so I'm puzzled with this is the case.

  (3) next step/guest is: "this virtual machine may have been moved or copied. I clicked on the button "I copied it".

  (4) the following message:

  Fatal error VMware Player: (mks)

  Exception 0xc0000005 (access violation) occurred.

  Log file is attached.

  Line 476 in the log file is:

  The following features of VT - x are necessary for the support of VT - x in VMware Player; However, these features are not available on this server:

  2016 06-07 T 13: 51:34.466 - 07:00 | VMX | I125: hostCpuFeatures = 0x217d

  In one of the previous installation, I did virtual Intel technology enabled in the BIOS after one of the responses of your forum. It has not removed the error.

  Just to clarify whenever I have uninstall I'm your site troubleshooting steps:

  (1) Uninstall using Add/Remove program of the program and features

  (2) run the installer with clean / change

  I do above steps as an administrator and restart after each step.

  On top I have delete the following folders:

  C:\Program Files (x 86) folder \Common Files\VMware

  File C:\ProgramData\VMware

  File C:\Users\Ivana\AppData\Local\VMware

  Files C:\Users\Ivana\AppData\Local\CrashDumps\vmware-vmx.exe.*.dmp

  File C:\Users\Ivana\AppData\Local\Temp\vmware-Ivana

  File C:\Users\Ivana\AppData\Roaming\VMware

  And delete the folder with the Virtual Machine for HP Quality Center.

  Do you know how can I fix a fatal error (mks)?

  The same installation works fine on HP with Windows 7, i.e. copy of VM for HP Quality Center is ok.

  Thanks in advance for your help.

  Usually, this is caused by outdated or incompatible graphics drivers on your host.  I expect that the latest drivers for your integrated Intel HD Graphics 4000 would be probably already delivered through Windows Update, however.  Could be interesting to see if there is an optional update in your Windows Update list to get a new graphics driver.

  Otherwise, you can try the problem by disabling 3D graphic acceleration: from the VM menu, select settings..., and then in the list of material , choose display.  Clear (uncheck) the box 3D graphic acceleration .

  I hope this helps!

  --

  Darius

• Mac OS 10.6.8 - Photoshop CS5.1 after years of perfect use, suddenly I'm unable to select a layer by clicking on the image and select it in the layers palette.  Solve this problem for me and I'll buy you a new car.  With our thanks, David Heidelberge

  Mac OS 10.6.8 - Photoshop CS5.1

  After years of perfect use, suddenly I can't select a layer by clicking on the image and select it in the layers palette.

  Solve this problem for me and I'll buy you a new car.

  With our thanks, David Heidelberger

  Hi David

  Have you checked your settings to automatic selection in the upper left of the workspace?

  

• Hello! I am a beginner Photoshop - how I 'color above' text on a jpeg image - then match the color background - then retype the new text above? If someone can give me really basic step by step intstructions - I would be happy!  With our thanks!

  Hello! I am a beginner Photoshop - how I 'color above' text on a jpeg image - then match the color background - then retype the new text above? If someone can give me really basic step by step intstructions - I would be happy!  With our thanks!

  Hi Donnas,.

  Content-aware fill is your best friend in this case.

  Just make a selection around the word and go to edit-> Fill-> Content-Aware.

  This usually done a very good job.

  Then you can either return to it several times (maybe in smaller sections) with Content-Aware fill to clean it, or you can play with the Spot Healing Brush tool (J) or the tool clone stamp (s).

  Please see the following link for more information 3 ways to delete the text to a picture in Photoshop - wikiHow

  http://www.WikiHow.com/add-text-in-Photoshop

  Let us know if it helps.

  Concerning

  Sarika

• Limitations of architecture with replication of VM with physical RDM Mode

  What are the Limitations of Architecture with replication of VM connected with physical RDM Mode in vsphere replication. Why VMware does not support this?

  I will add some colors to the response of GS. A particular interest with regard to the physical path RDM (pRDM) works, summarize these two chips of the article:

  • Physical mode specifies minimal virtualization SCSI of the mapped device, allowing greater flexibility for SAN management software.
  • VMkernel passes all SCSI commands to the device, with one exception - the REPORT LUNS command is virtualized, so that the VMkernel can isolate the LUN to the virtual machine owner. Otherwise, all the physical characteristics of the underlying hardware are exposed.

  There is an integrated in vSphere vSphere (RV) replication agent that has several functions. In particular, she keeps track of the Scriptures to the virtual machine. When a replication cycle occurs, the changed data is replicated to the target location. The VR agent should be able to 'see' These Scriptures to follow. Given that the physical mode all SCSI commands directly to the device, the VR agent is unable to follow these changes for replication.

• Having trouble getting a REST to work with our ticketing system

  After building servers my team must complete the tickets for the kickoff of a 'validation' workflow to verify the server is in place and configured as expected. Our ticketing system can accept many REST calls to automate this process and prevent us from manually fill in a form again. However, it seems to use a type of authentication that is not necessarily supported by the plugin to REST.

  API authentication methods. Documentation of Gemini

  The link above is the article explaining the auth method. It's a name of user/key combination that is encoded in Base64. I have my login and my password encoded, but now I don't know how to make the plugin Orchestrator properly to meet the requirements of this API. I tried many things like shared Basic authentication setting and the 'basic' as the username and my encoded string usage in the ' password ' field, but no dice. " I still get a 401 Unauthorized the Gemini project back. Can anyone shed some light on how I might accomplish this? I met a brick wall here.

  Nevermind that. After working with our web developers, it turns out that someone has changed the method of authentication of this goofy apikey led to NTLM. I tried that and you can now query information without problem.

  Ugh! Good news is that I can now move!

• Start with the Advanced mode in the Query Panel

  
  JDev ADF BC 11.1.1.5.0

  I have a panel request in my form with table made from view criteria.

  When run, it begins with the basic mode.

  I want that this be changed first immediately advanced mode.

  Is this possible?

  Yes, change the view in the model project criteria. You switch to the indications of the user interface tab and select "Advanced" for "search region mode.

  Timo

• Latest version of Adobe Flash Player is not compatible with our android tablet - can I install an earlier version of AFP that works?

  Hello...

  .. .and please read this:

  We have a Nextbook Premium8 tablet that is the two-year sentence. We had to reset to factory settings and in doing so lost our Adobe Flash payer application. Trying to re - install AFP, we received a message that our wan tablet is not compatible with the latest version of the AFP.

  Is there an earlier version, archived AFP who will work with our tablet, and if so, what version - Flash Player 11.1 for Android 4.0 (11.1.115.81) September 10, 2013, perhaps??

  It seems almost unbelievable that our tablet should be this obsolete for use with Adobe Flash Player after a period as short as two years.

  Thank you once again,

  Robert Lucas

  It's not you, it's us.  We no longer Flash Player for Android.

  The last working version released for Android is missing a year and a half updates security at this point, so I would strongly recommend against running to it.

  The details on why Adobe dropped support for Android are here, but yes, we have not published an Android Flash Player since the end of 2012.

  Adobe roadmap for the Flash execution environments. Adobe Developer Connection

  There are some alternatives that you can use to get Flash on your phone.  They are for the most of the web browsers based on a cloud, where they run the Flash in the cloud and the flow of content to your phone.  It works surprisingly well.

  A quick Google search for "Android browser Flash Player" turns to the top of these options:

  http://Lifehacker.com/now-browser-is-a-lightweight-browser-for-Android-with-f-1548329538

  Puffin Web browser - the fastest mobile browser with Flash support on cloud on iPad, iPhone and Android.

  https://play.Google.com/store/apps/details?ID=com.appsverse.Photon&hl=en