Insert the Audio leaves behind

Similar Questions

• Insert the audio button wants me to insert the image file instead (glossary in Cp7)

  Hello

  I'm new to Captivate, but I'm trying to do something very simple.

  I am creating a glossary (interaction) and when I double-click on the definition, I can choose to add audio or add images.

  The problem is that when I want to add audio and find the file, the window says "select the Image of the library". If I select an audio file in any case, it says that the file type is not supported.

  If I try to add an image by choosing the Add image button, which is not a problem.

  I encountered another problem with Cp 7 in the short time that I use (issue has been resolved by a forum but no one can say exactly how much). This version has a lot of bugs? I guess adding audio to the glossary would be common that so maybe I just downloaded a bad copy of the Cp7 somehow.

  All advice appreciated.

  Jacqui.

  Hello

  I inserted the audio using the same dialog box. You just need to select the sound file in the dialog box Select the picture from the library , and then click OK. It works very well.

  Here is the screenshot.

  

  Anthony

• How to insert the audio file (drive) to the web page of Muse?

  I am designing a web page in Adobe Muse CC and how do I insert music to the web page file, so I can be played? GisliG

  Hello

  Please visit the following link Re: how to add audio in Muse (not in background)?

  Kind regards

  Aish

• The audio upgrade on Pavilion p7-1026

  I have a p7-1026 Pavilion with Windows 7.   I want to improve the audio by adding a sound card to replace the audio Board.  I have already added a graphics card to replace the graphics card integrated and had to disable the graphic edge using in Windows safe mode device manager.  There is apparently no way to do it in the BIOS on this particular system.  This method worked well for graphics.

  Do I need to follow a similar procedure for sound?  If I have to turn off the existing sound first, use the same method to use fewer Windows Device Manager or is there a setting in the BIOS?

  Turn off and unplug your computer, and then press the power button to discharge the power supply. Open the case and remove the "knock-out" with a screwdriver flat-blade. This is accomplished by twisting the knock-out back on the short axis. Then, insert the audio card and close the case. Plug the computer back in and turn it on. Now enter in the BIOS, set up the audio embedded on "Disabled" and save the settings. Load the driver and you should be good to go.

• Add the button to play the Audio

  Rick and other experts, it should be easy, but heck, I can't make it work.
  
  Location: 6 Captivate slide 2 (any text, from PPT). Next navigation control button appearing a.5 and stopping at 5.5 no other objects or chart on the slide back and forth.
  
  Problem: I want to add a 'play' button, which will allow students to hear an audio summary of the information. However, I want the button to appear also a.5 seconds. I tried different variations, but no matter where the play button is or where the 'pause' is placed on the timeline, the audio still works without clicking. I don't want to do this.
  
  Any solution other than a jump to?

  Hello

  There should be several ways to do this.

  * If the sound is at the level of the slide, phase it so it's not 'appear' to a.5,.6 ou.7 seconds in. Then configure the button to pause seconds a.5.
  * Configure the button with a legend of success and set the audio to the legend of success
  * Insert the audio on the next slide and have the button simply open the next slide

  There are other ways as well. Just threw a little.

  See you soon... Rick

• Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.

  Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.

  Hello
  Try this:
  http://support.Microsoft.com/kb/306318
  b Eddie

• How to insert images without the audio 1 and the soundtrack

  I'm new to first 10 items and I have a problem when I move clips such as images in the middle of the timeline between video clips.

  When I move a photo directly in the middle of the time line it clips and separates the music I have on the soundtrack.   I found through Lynda.com and Adobe help if you hold down the "alt" key while inserting the new image you will not affect the soundtrack or other securities.   This problem I have with the alt key is now the rest of the clips in the timeline panel have audio track 1 and track the offset of 1 video by the duration of the image that was inserted.  My project is more than an hour for a long time then it is difficult to go back and that straighten.

  What is the best way to handle this?

  Adding additional video clips in the middle of the project works very well with the alt key as the video 1 and audio 1 move together.

  Unfortunately, you have to decide whether you want the new clip to insert. You can set the ripple to insert on a timeline and not other chronologies of ripple.

  If you don't hold down the CTRL key, the clip will insert you place - but it will break your piece of music.

  If you hold the Ctrl key, nothing on the timeline will go - but, if you try to place it where there is already a clip, it will overlap.

• As a person in the main video takes the floor, I want to insert an image, while the audio stays...

  I have one main video where a woman takes the floor. In his speech, I would like to continue talking while using different images that makes her disappear, but not the audio... How do I with IMovie on my IPhone?

  See iMovie for iOS (iPhone, iPod touch): organize audio clips. You should be able to detach the original clip audio but keep them lined up, allowing you to adjust the video and then move on to still images while the audio continues to play.

  TT2

• Half of the audio is missing. After having inserted the wrong cable.

  More than 50% of the audio disappeared right before my recording session. I plugged in (line in) the wrong cable. giving the huge volume of pc. The noise rose for a moment. And lowered at half capacity. I checked everything (I could) and everything that seams to work fine. The worst is that I have NEED of THE VOLUME! Since then, I was in the middle of doing some recordings...

  Vista 32
  Realtek HD audio driver 6.0.1. 5377
  You ' r help is much appreciated...

  Hi lucid-dreamer,

  Are what cable you referring?

  You can try the following steps and check if it works.

  Increase the volume of the sound recorded and then try to record the sound again. To adjust the audio volume recorded, follow these steps:

  1. click on Start, click Control Panel, click hardware and sound, then manage audio devices.

  2. click on the recording tab, click the audio device you use to record sound, and then click on Properties.

  3. click the levels tab, do drag the volume slider to the right to increase the volume, and then click on OK.

  4. start Sound Recorder and record the sound again.

  For more information, please visit the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems

  When you use the tape recorder to record audio in Windows Vista, the audio recorded may contain persistent organic pollutants, clicks or other distortions

  http://support.Microsoft.com/kb/936693

  Hope this information is useful.

  Boumediene. K.
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Leave the button to play the audio only twice

  I am building an assessment of the foreign language with audio passages that the user must listen to then answer two questions about this. The user can play the audio twice. But even if I put 2 number of attempts, when I tested it, I was able to play the audio unlimited times. What is the trick?

  

  You seem to misunderstand the 'attempts' to an interactive object, will attempt to clarify. It does not limit the number of clicks ON the interactive object (here a button), but saying how many attempts can be 'impossible', which means clicking outside of the object. For your use case failure action would never happen, because the user always clicks the button, never outside it. Even with the project to continue that left you for the action failure: never happens.

  For the successful action, you use the command Play Audio, with project to continue unchecked: This means that the user can click several times, the playback head was never released, and audio can be played as many times as you want. The solution is to use a conditional, tip action (not a standard action because you want to allow 2 attempts, sorry David - TLCMediaDesign) and a counter variable. Here are the steps:

  • Set a user variable v_attempts with a default value of 2
  • Create a tip action to be triggered by the button that looks like this:

  

  It is always prudent to turn off the button before you hide it. Or you can just keep turn it off. This action also allows you to show the attempts left in a container of text:

  1. Before the first click: v_counter = 2
  2. After all, first, click on: v_counter = 1
  3. After the second click: v_counter = 0 and since it is more possible to click, there's = 0; This is important because CP is not very mathematical mind, does not see the difference between a negative and a positive number.

  It is also very easy to change the number of retries by simply changing the default value. Think it will be one of the (easy) scripts in my recipe book future actions. TNX for the question.

• How to replace the audio clip with each other instead of stack

  I'm editing a long track of narration in Audition, and I have to paste a small audio clip on narrative in several places.  I want the pasted clip to replace this part of the narrative, as it would in first.  What he does in hearing is battery clips, so if I choose narration for some reason, all the clips on the top of the narration are now moved behind her.  To get back them, I now spend the narration to an empty track clip, do the same with those who went behind and everything put back in the correct order.

  Is it possible to have the clip pasted to replace what you paste it above as it would in first?

  Thanks in advance for the help!

  Phillip

  With the help of hearing CC 2015.1 build 8.1.0.162

  No, unfortunately, if you work in multitrack view. An easy insertion function was requested to do exactly what you want but is not yet available.

  The simplest solution is to split the clip to where you want to insert the new plug. You can do this either by using the Razor tool or the shortcut Ctrl-K. Then when you place the new clip on top it will show melted shackled at both ends. If you select one of the parts of the original item, you can click on the edge and drag it to the appropriate end of the new clip (leaving a chained if you wish or not fade).

• How can I change the audio device automatically between exits?

  Original title: Dual monitor mode

  I am currently running Windows 7 Home Premium 64-bit with Media Center and my hardware is Inter Core 2 Quad with NVIDIA GEFORCE 9800GT and an integrated Hauppauge WinTV HVR-1800 ATSC/QAM.

  I have two DVI-HDMI, one output to my monitor 24 "HD and one for my 42 '' HDTV and computer speaker are connected to the SPEAKER OUT behind the computer.

  The problem is when I look at Internet TV through my computer on my HDTV, I need everytimes switch my Default Sound Source of speakers to the HDMI OUTPUT in my-> hardware & sound control panel and market back when I want to use my computer.

  Someone knows how to fix this?

  Hello, DuFF1

  You can have only one default device.

  It is not possible to put two devices by default, nor is it possible to configure the output in default Media Center device. You can try searching for additional Media Center change the audio device by default or continue editing the device default manually before watching TV on the Internet.

  You can leave your comments on the following link:http://mymfe.microsoft.com/Windows%207/Feedback.aspx?formID=195

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• TVos 10.0 connects not to the audio from the airport

  Since I've upgraded to the latest AppleTV (about a year now?) I had to browse the audio airplay on my airport because connecting the HDMI cable directly in my system Pioneer VSX 1020 Surround THX certified cinema makes the freak out of the unit and quickly scroll well some input devices, resulting in a cacophony of strong gusts of random audio sources.  My job, as long as I've owned the thing, was to plug the HDMI directly to the TV and run the audio through the airplay of the airport that connects to this same system surround as my input source "iTunes" for my iPad Pro, iPhone, Plus 6, Mac Mini and MacBook Pro (s).

  I upgraded to tvOS 10.  last night and now, even that does not work.  You can select in the settings, but as soon as you leave, it is default to the direct connection of HDMI on TV never inviting to enter the password for Airplay.  Anyone know of a work around for my solution to workaround for this wonderful device that has been damaged since its inception?

  Hello. Can you try disabling the AirPlay password? In addition, your TV has a (possibly optical) audio output which you could feed the surround system? Or does have a HDMI with ARC port that would work with the system? Turn off the TV and receiver control in ATV could make work more happily with surround sound.

• Firefox leaves behind cookies and form history and research?

  I have Firefox value Never don't forget no form & search history, delete cookies after closing, delete the cache after closing. However, if I do and scan with Ccleaner I notice that Firefox seems to leave behind the cache, cookies, and form data? Why is it not completely eliminated? They are just empty files?

  SQLite files are never deleted or size reduced if the content is removed, so you can not tell by their presence if all data are left in it.
  There may be some records marked as being removed still left in the file that would not display in the user interface.
  You will need to check the files with a hex viewer to check that.

  I don't know about the cache of the jumplist.
  You may disable this feature.

  • the subject: config: browser.taskbar.lists.enabled = false

• Firefox V 25.0.1 on an iMac OSX 10.9 will not play streaming audio from a web site. Audio on Safari V7 OK. Any ideas on how to get the audio Firefox to play?

  The audio on the site is in MP3 format. The site is coded in PHP.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.