Inspiron 3647 not activate Win 8.0

Similar Questions

• Can not activate win 8 error "the key provided is not for this edition of windows, use either windows 8 setup or enter an activation key for windows 8.

  OT: Cannot activate win 8 on my laptop due to the change of hard disk.

  Hi all

  I have a Samsung np550p5c-s05in and it came installed with 64-bit Windows 8, later, the hard drive developed a few problems and as I had guaranteed him, they were replaced by a new, but this one came with a victory 8 32-bit that is not enabled. Now, I got the product key of victory last 8 I had so I tried using them to activate, but an error came that said something like

  "The key provided is not for this edition of windows,

  Use the installer of windows 8 or enter an activation key 8 windows. »

  So it was logical that the key I had was for a 64-bit win 8, so I installed win 8 64 bits of an image file and then I repeated the same procedure to enter the key and the same error came once again.

  I would ask so you people to please help me with this, because I have no idea whatsoever what to do next.

  Thanks in advance,

  SamizZy

  All laptops with preinstalled Windows 8.1 are OEM version of the product that are modified by computer makers. You cannot activate a product of retail of Windows 8 with an OEM key.

  When get you the computer from the computer. I suggest that you create a recovery disk to help you in the future.

  http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-drive

• Can not activate Win 8 - reports of problems with the product key

  Hi all

  I have just downloaded 8 Win and tried to upgrade my existing Win 7 Home Premium VM, which I run on VMWare Fusion 5.0.1 on my Intel MacBook Pro 2009. I wasn't able to do the upgrade in place - the installer told me that it was not possible to run Win 8 on this machine. Instead, I created a. ISO file and used to install Win 8 in a new virtual machine. Everything works fine, but I can't activate Win 8. The error message tells me that "something is wrong with the product key" even if I could install Win 8 with the same fine product key.

  I called various hotlines MS today but don't have anything got no solid advice. Am I the only one who experience this issue? Is there something I need to pay attention during installation of the virtual machine to win 8? Is it possible to install a fresh VM with a key product upgrade in the first place? I would appreciate any information you might have on this subject.

  Thank you in advance and Bravo,

  Georg

  Hello

  Had the same problem after installing Win 8 Pro Upgrade on Fusion 5. Follow-up to "How to do a clean install on Windows 8 Pro Upgrade VMWare Fusion" here, problem solved (for now).

  http://www.moosooboo.com/tag/clean-install-on-Windows-8-Pro-upgrade-in-VMware-Fusion/

  Good luck

  JKB

• Can not activate Win 8 after removing all of the Satellite P850

  I did everything remove and reinstall Windows 8.
  As in the factory setting.

  But I can't activate Windows. The product key does not work.

  The Windows 8 K OME on my Toshiba Satellite P850.

  Thank you.

  Cheers mate.

  Hello

  The key of product at the bottom of the device would not work!
  The pre-installed Windows 8 would be activated automatically during the startup and configuration of the system for the first time!

  You format the whole HARD drive? Did you remove the 8 Windows from the HARD drive?
  Have you created a disk recovery or flash memory stick recovery in the past?

  ISN'T IT?
  In this case, there is only one option to get to factory settings.
  You will need to order the Toshiba Recovery disk:
  http://backupmedia.Toshiba.EU/landing.aspx

• can not activate win 7

  Hello

  This is my problem: my cousin bought a new computer system and he gave me his old one with windows 7 that he bought.

  He said re - format the hard drive and do a fresh install to erase its info, which I did and now I can't seem to activate the windows 7 now on this system.

  He told me that it is the only system that he has used his software purchased on and not others then why can't activate it now, the only difference is his name and my name?

  Please notify

  Carmen

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Can not activate Win 8

  How did you determine that the computer is infected is no longer?

  You still have your MBAM logs? [<=just a="" question;="" please="" do="" not="" post="" them="">

  The only way I know is through a new analysis with some antispyware I.  Once a week I do a full scan with Defender and Malwarebytes...

  Without that newspapers are no longer on my computer except a very recent log...

• Impossible to re - activate win 7 after reconstruction of computer. installation tells me build 7601 not a copy authentic, worked fine before

  Rebuilt my computer and had to re - install win 7 using my genuine copy. Win 7 works but can not activate with my code. Download the windows message 7601 build is not authentic.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• WANT H8-1569: cannot activate WIN 10

  I had my HP ENVY again in the box for 2013 and decided to start to replace another PC who was dying.  He started by WINNING 8 (not 8.1) and was soon to do all the necessary updates to the current. I have not upgraded to 8.1 to WIN.

  Before the break free WIN 10 update, I installed the upgrade and everything was fine until I saw the message that WINNING 10 needed to be activated. I had no WIN 8 product key, but used Majical Jellybean Keyfinder to get the key, but WIN 10 still would not turn on.  According to Win Support that I need to get a key for WIN 8 activate WIN 10, but the key in the bios was crushed by a 10 key WIN by default overwritten during the upgrade.

  So is it possible around this so I can activate WIN 10 or is there a way I can get a WIN 8 key to solve this problem?

  My other alternative is to buy 10 WIN and do a reinstall, but I would avoid it.

  Thank you.

  Peter6083

  First of all, by itselfr, Windows is UNABLE to write to the UEFI firmware where the product key is installed; Therefore, there is no way that a Windows Setup would replace this key.  You must use the programming code of the special firmware (like the one provided with the updates to the BIOS) to change the firmware.

  Second, MagicalJellyBean is not reliable to find OEM product keys, as it tends to report what he sees in the registry, and that is not always correct.

  To find the integrated in the UEFI firmware OEM product key we this utility: Showkey - Windows 10 Forums

  Good luck

• Impossible to reinstall &amp; activate win, help please

  An Optiplex 790 supplied w/win7pro. virus messed up so badly he had to erase and start over. He didn't restore factory disk. Media is long gone. I have the key # on the side. I tried a dozen ways to rebuild blocks of MS and it me at every turn. I was able to download win7 from MS, but not with an OEM key. I tried a win8 Dell another disc, but do not have the key. Were responsible for win7 but not activate a detail win7pro upgrade dvd and I have the key with this but he doesn't like it. Tried the key from another Dell supplied with win7. win10 downloaded, but he does not like any key I. don't want to order and wait days for Dell to send a new drive. Someone get out me of this rat maze before MS I'm going crazy. Please, I beg you.

  Thank you.

  Did you give a shot to the phone's toll-free activation service, although its toll-free number in Finland. I reinstalled Win 7 on several second hand Dell machines, and most of the time the OEM license on par with the machine key failed automatic activation.

• Inspiron 3647 - what is the best way to gt part of the motherboard?

  What is the best way to discover the part # for the motherboard that came in my computeer?  It is an Inspiron 3647 and it is out of warranty.  The express tag # on it's: [Admin NOTE: maintain the label removed in accordance with the TOU strategy]

  Thanks in advance,

  Betty F., Stonington, CT

  Hi Betty,.

  If please add me as a friend and send me the serial number of your system via private message. I check the motherboard part number and get back to you.

  Kind regards

  Dell - zaanouni HS

• Best graphics card for Inspiron 3647?

  I don't know how to find it on the Dell website, but I want to put the best video card as I can in the desktop computer Inspiron 3647. I would rather have 1 to 2 GB RAM, video card, but I don't know that is even supported or if I can pass the power supply.

  fans are going to be part of life with a compact system like that... There is not a lot of space open so fans must come out warm air to keep things from overheating...

  64 bit certainly account for games... If you find a card that works and which has a memory of 128-bit interface you will be a happy player.  interfaces memory 64-bit will choke the 3D games

  Here's a 730 NVIDIA which is a simple map width of low profile that comes with low profile brackets:

  http://www.Newegg.com/product/product.aspx?item=N82E16814487053&ignorebbr=1

  You can also wait to see if the Speedstep or Osprey users reply to your message... they are wise in this area.

  It has been my experience that it is better to have a card of 128 bits with 1 GB of RAM than a 64-bit card with 2 GB of RAM.

• Dell Inspiron 3647 with monitor Samsung

  The Samsung S27D390H monitor does not seem to get along with my new Dell Inspiron 3647 system, bought at the same time for the system.

  Sometimes, the screen is black and will not respond when I turn it on.  Dell said that not all monitors are compatible with their systems, if they would not comment specifically on this monitor.  Together, they said is why not to buy a Dell monitor.

  It could be a 10 Windows sleep problem or a problem of monitor or computer hardware.  Dell tells me about the monitor because it is not a Dell monitor. Microsoft won't talk about the problems of sleep with Windows 10 because I bought the system from Dell with Windows 10 on it so Microsoft says that I must deal with Dell. I spent an hour and a half on the phone with Dell, struggling to understand the accent of the person I was talking about. It was exhausting and frustrating but no help. I'd stick rather pins in my eyes!

  So we plugged the monitor into a power strip and turn off the power strip. So far that has worked, but the problem is intermittent, then it will be some time before we are confident.

  Reference verified Dell Bios version.  All standby/hibernation settings have been checked and turned off by Dell.  Not sure about sleep of the BIOS.  Don't know what your last question.

  Been another incident.  Off the monitor with monitor power switch.  Half an hour later turn on monitor power switch.  Black screen.  Waving the mouse.  Typical exhaust.  Hit Ctrl Alt Delete.  Nothing.  Turn off the power strip and he turned his back.  Picture came back on the monitor.  And it showed on the screen Ctrl Alt Del orange asking what I wanted to do.

  But really, I'm fine with the solution of power strip.  It's simple and it works.

  Thank you all

• You can use a win 7 Home premium... to activate win 7 starter?

  I bought two copies of Win 7 Home Premium.  I have replaced the hd in my acer netbook and want to install win 7 starter instead of xp.  You can use a win 7 Home premium... to activate win 7 starter?

  Thank you.

  No, you can't. Windows 7 Starter Edition requires a product key of Windows 7 Starter.

  Since you have two licenses for Windows 7 Home Premium, why not use one of them?

• Windows 7 will not activate with the OEM key, after the failure of HARD drive.

  Hello

  I was recently asked to repair my brother DELL laptop.  The HARD drive failed and the system unusable.  I replaced the HARD drive and installed Windows 7 Home Premium x 64 (earlier version of windows) from my own installation media.  The recovery partition had survived the failure of HARD drive, I would have just cloned that and used, but this was not an option in this case.

  The problem that I am experiencing, is that windows don't will not activate, saying that the key is not valid.  I was told that installing Windows 7 media would work with a retail or an OEM key, but that doesn't seem to be the case.  The key OEM I use, is from the computer it came from originally, and the only material change is the new HARD disk.

  I try to avoid ordering an OEM Dell installation CD, as which costs money (I already have my own installation CD) and takes time (why do they have them available for download?).

  Any help would be greatly appreciated!

  Thank you

  Brian o '

  Here is the information that the Microsoft Genuine Advantage Diagnostic Tool spits out:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - QCPVQ - KHRB8-RMV82
  Windows product key hash: + Rj3N34NLM2JqoBO/OzgzTZXgbY =
  Windows product ID: 00359-OEM-8992687-00095
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {AC8177E3-D2B0-45ED-B79B-E129894262D3} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130104 - 1431
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {AC8177E3-D2B0-45ED-B79B-E129894262D3}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-RMV8200359-OEM-8992687-000952S-1-5-21-1225630707-1574482703-4192685535Dell Inc.. Inspiron N5030 Dell Inc.. A02 20100913000000.000000 + 00032933F07018400F804090409Time(GMT-05:00) Standard is03DELL WN09 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800095-02-1033-7601.0000-0892013
  Installation ID: 004806170012218410865063155553272544088463952332351022
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: RMV82
  License status: initial grace period
  Time remaining: 43080 minute (s) on (29 day (s))
  Remaining Windows rearm count: 3
  Trust time: 31/03/2013-02:23:35

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: MAAAAAEAAgABAAIAAAABAAAAAgABAAEAeqgI7yp8en9YkLIC/j7Shg44gAGAPUbK

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL WN09
  FACP DELL WN09
  HPET DELL WN09
  MCFG DELL WN09
  WN09 DELL SLIC
  OSFR DELL WN09
  SSDT PmRef CpuPm

  you use an OEM SLP key that only works with the manufacturers recovery media.

  change the product key to that on computers of COA
  Click Start, type slui3, press ENTER.

  Additional information:

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  COA SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

• code 0x80072f8f when I tried to activate win 7 ultimate

  code 0x80072f8f when I tried to activate win 7 ultimate

  Hi Claudiuburloiu,

  Error: 0x80072f8f occurs usually when your computer time differs from the time zone that you belong.

  I suggest to follow the steps below and we update on the State of the question.

  
  Method 1: Verify and adjust the date and time settings.
  To do this, follow these steps.

  1. Click Start, and then run.
  2. In the Open box, type Timedate.cpl, and then click on OK.
  3. Under the tab Date and time, make sure that the date and time of the computer are correct. If the settings are incorrect, adjust to the correct date and time.
  4. Click OK to close the Date and time properties dialog box.
  5. Try to activate your operating system and check.

  If the method above does not work, proceed to the next method.

  Method 2: Refer to the F, G method from the following link and check if this solves the problem.

  Error message when you try to activate Windows 7 or Windows Vista: "an error has occurred."

  http://support.Microsoft.com/kb/931276

  If you have additional questions, or if this problem persists, come in and we will be happy to help you.