Inspiron 8600 LCD screen low image only shortly after switching on. image of the external monitor OK

Similar Questions

• Shaking image on the external monitor when the Satellite A200 is running on AC

  Hello

  I have this problem that drives me crazy... I bought an external monitor for my laptop Toshiba Satellite A200-1 9 s, but the problem is that the image on the external monitor, shakes. I tried another monitor, the same, another cable, same problem; the only way to stop it is to unplug the AC of the laptop.

  I also tried to move the monitor further away from the laptop, but nothing.
  I can stop shaking so hard that if I switch to the profile AC from FULL POWER to save power... but even with this image is still shaking a little.

  So basically there is a magnetic field around here, probably in the portable, which makes my picture shaking like crazy... someone knows how to stop it?
  TX

  Hello

  Hmmm...
  I don't think it has to do something with magnetic fields.

  Cause she is related to the energy consumption of the computer, it seems that there is a problem with the AC adapter.
  If he needs to deliver all the 'juice', this is capacitors to keep absolutely stable voltage may be too low.
  These instabilities (with the frequency of 50 Hz supply) can parasitize the signal on the screen.

  A solution for this?... If you know how to solder some fat capacitors somehow between the two...

  Or:
  It is a grounding problem
  I have never heard of such problems with the LCD (VGA monitors?) monitors. Generally, this is the case when you use an analog video output,
  leading to no color on TV.
  You have an annoying hum when you connect the audio output to an amplifier? It would be a sign for it.
  I had such a problem and solved by plugging my laptop on the sector on another circuit in the House as my audio devices
  So experiment with it.
  First: unplug all the other stuff (printer, Poles, antennas, all) these are unpleasant problems with a lot of possible interference.

  Let me know!

  Welcomes Matz

• Qosmio X 305-bad image on the external monitor quality

  My x 305-701 has excellent image on the original monitor, but if I connect the laptop to Acer 22 ' VGA cable I get a blurry image on the external monitor only.

  It does not matter if I use two monitors at the same time or just the Acer, the external monitor is always blurred the laptop monitor is always perfect. I tried the external monitor in 1440 x 900 and 1680 x 1050 and have adjusted the frequency of refresh of all available parameters, 59 Hz, 60 Hz and 75 Hz, and the blurred image is still there.

  I love this Qosmio and appreciate it even more on the widescreen monitor any help would be greatly appreciated.

  I know that LCD screens are blurry if set to non-native resolution. I think you need to set the correct resolution for the external monitor. Check your external display native resolution and set in display settings.

• Portege R500 - no image on the external monitor

  Hello everyone

  There is no image on the external monitor on my Portege R500 with Win XP SP3.
  The screen seems to receive the signal, but the screen remains black.

  Anyone know a solution for this problem?
  Sorry for my bad English.

  Thank you.
  Daniel

  Hello

  How have you tried to exit from display on an external monitor?
  Usually, you use the FN + F5 key combination.
  This allows you to switch between the two screens; laptop + external display.

  I had a problem to view a video on the external monitor because the video is already running. You must switch to the external display until you start the movie, etc.

• Portege R500 - cannot see an image on the external monitor

  I have a R500 and use a port replicator. I use a DVI connection to my main screen (monitor 22 '').

  I tried to configure the extended desktop but cannot get the external monitor to work - my laptop monitor remains off and I can't make it work even after checking the display settings to be "extend my Windows desktop on this monitor.

  What is the problem?

  Hello

  What happens if you connect the monitor directly to the laptop without docking station? It work?

  In addition, I would try to update the display driver and BIOS. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Portege M800: No image on the external monitor

  Hello
  Today, I tried to connect my PC laptop Toshiba M800 to another CRT monitor without success.

  I use the Fn + F5 keys, but nothing happens, I mean a small window opens which shows me the options LCD, LCD + CRT, CRT, LCD + TV etc, but nothing happens when I choose CRT or LCD + CRT.
  I use a VGA cable, it's ok because the same monitor and the same cable works fine when I use my Acer laptop.

  I even downloaded the latest display driver Intel and the last updated of the BIOS, but there still nothing...
  All ideas will be welcome. :)

  It's very strange.
  What is your laptop preinstalled with original Toshiba recovery image?
  What operating system do you use?

• My compaq presario v6000 screen is totally blank but works fine when connected to the external monitor

  Hello

  I have the above equipped with windows vista, I have a totally white screen and have tried to shine a bright light and I see nothing.

  the OS is vista

  any ideas on what is the problem?

  Thank you very much

  Hi totallybusted,

  Try conecting an external monitor to the video output of your laptop connector. If you can see the video when you turn it on the LCD screen has failed. It must be rplaced to return your laptop to a usable state.

• How to observe the image on the external monitor HDMI and sound to listen to speakers Acer Aspire?

  My Aspire 5738 is hung with AOC brand 27 "HDMI external monitor through HDMI cable. This monitor is without all speakers. I made this PRIMARY Aspire 5738 15 '' screen monitor.

  When I play a DVD/CD using the CD NO SOUND drive out of Aspire Laptop speakers. But photo work on AOC monitor that is not useful. Aspire 5738 has TWO processors in Device Manager. Intel (by default) and another a ReaLTek, both are HD quality.

  Can any user or leader forum advise me "how-to configure (if Possible) one of the TWO HDMI audio processors ' GOLD of other practical solutions?

  You can set the speaker as default device in its option to get audio from the internal speaker on your laptop.

  Open the 'control panel', click on 'hardware and sound '.
  Where it says 'Sound' in green letters there are three options below that are in blue, click on "manage Audio devices.
  This will bring up a window titled "Sound".
  On the tab 'Read' it has listed the sound options at your disposal. Set of speakers as the default device.

• My laptop (Dell Inspiron only 3 months old) is displayed on an external monitor, but not on the laptop screen. I am running Windows 7.

  My laptop (Dell Inspiron only 3 months old) is displayed on an external monitor, but not on the laptop screen. I am running Windows 7. It was running and display very well last night. When I turned on this morning the monitor lit up but show just a gray-white screen and no office. When I attached an external monitor, I could see desktop and all other programs and Windows 7 routines seem to work very well.

  MB

  Press the Windows logo key and the p key, and then set up the PC to display on the built-in monitor only cycle through with the arrow key.  You can make this Store if you want - key Windows-p, right arrow once, paused for a few seconds & the laptop monitor should then appear normally.

  You can do so at the end of each session using the external display while you are ready for the use of the laptop on its own later.

• Portege Z830: I want to disable internal LCD and use only the external monitor

  I have a Toshiba Portege z830.
  I use my laptop in "Extended desktop", mode with an external monitor, which is the main display.
  In this mode, the two screens are still on, but I want the built-in LCD screen to be opened only when I use it.

  Is this possible?
  Thank you.

  Hello

  In my opinion, this is not possible.
  In extended mode, you use and display internal but extended and the long part is visible on the external monitor.
  In such a case its any that your external monitor is set as main display.

  If you want to use an external monitor only, you can only export the video signal on external monitor by pressing FN + F5

• My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  Hello

  I'm sorry to say this, but it points to a UPS of material about to fail.

  You will need to bring the laptop to get it replaced.

  Slan go foill, Paul

• Black screen after on native screen only hp logo, but the external monitor is ok

  Hello everyone. HP Pavilion dv9700.

  The graphics card has been burned, and I ordered the new motherboard of eBay and replaced it.

  The problem is:

  When I turn on the unit, the native screen flashes once the HP logo then it becomes black. If I unplug the video cable and connect the external monitor, it works perfectly. The same thing with remote access. I start with a blank screen, and I can connect remotely to the laptop.

  What did I miss? where to look for potential problems?

  the problem has a link between motherboars and display.  I could see the screen by moving the display cable. Maybe it's because the poor quality of the motherboard, I bought

• Tecra M3: black screen on startup, the vertical lines on the external monitor

  Hi all

  I searched a lot on the Internet for a solution to this specific problem, I have, but did not find a thread
  with exactly the same problem. I have a Toshiba Tecra M3 with Windows XP SP 3. Two weeks ago, I encountered problems with the commissioning. After a couple of times to restart it would work. Then it became worse... When I try to run I see no splash... the screen remains black. If I press the power button, I hear the fan and CD player but no screen. It is totally black. I know its working because I can go (blindly) in the installation program. Press end, and then press Y and enter. The computer will restart but still no screen.

  I plugged it to an external monitor. Pressing Fn and F5 allows switching. The external monitor shows different
  vertical lines in multiple colors. They change if I go to settings or you try to start windows.

  Does anyone have a solution to these problems?

  I have fear of solution can be given by the service only.
  In my view, this question must be tested properly.

  I can't say for sure, but to me that sounds like a technical question. Without testing you will know for sure what is the problem.
  Here on the forum we can only speculate why this happen.

  As you can see on notebooka? s LCD problem. On external it doesnâ? t properly work as well. It may be a faulty graphics card.
  Try to contact the nearest authorized Toshiba service and speak with the technician.

• How the external monitor, my main screen and not the laptop?

  I went to devices-> project->, extend, but the only option seems to be the laptop as main screen and the secondary monitor. I would like to the external monitor to the main screen. I did it on other computers, probably, it is possible with the updated technology?

  Any help would be appreciated.

  Thank you

  Hi tide,

  I suggest you follow these steps on an external monitor as the primary display.

  a. drag from the right edge of the screen, tap settings, and then click change PC settings.
  (If you use a mouse, point to the corner bottom right of the screen, move the mouse to the top, click settings and then click Change PC settings).

  b. press or click on PCs and devices, and then tap or click on display.

  c. in the image preview, tap or click the monitor you want to use as the main screen for the select.

  d. Select the checkbox make of this my main screen .

  See the article for more information.

  Get the best display on your monitor
  http://Windows.Microsoft.com/en-us/Windows-8/get-best-display-monitor

  Note: applies to Windows 8.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Satellite P300 - screen is broken - how activate the external monitor

  My screen is completely broken.
  I hung on a desktop to the laptop monitor.
  I need to know to turn on the broken and the other external.

  I turn on and I am looking for an a little glowing screen and cracked and broken.
  I don't know this may be to do I don't know what buttons to push because I see a screen.
  IHIS, this is my first Forum ever thanks!

  Hi mate

  I recommend using the FN + F5 key combination
  You can use it to switch to output the external monitor or TV.
  This key combination supports several options:
  -screen internal + external display
  -external display only
  -TV out
  -etc...

  You have to press FN + F5 several times in order to get the right output.