install a program can not restart

Similar Questions

• This program can not find the Web page

  I have Windows XP.  Every time you start-up the computer and after the restart, the screen "this program can not find the Web page" appears.  I have to close it manually to display the desktop before entering for example or Google chrome.  How to get rid of the error screen?

  I have Windows XP.  Every time you start-up the computer and after the restart, the screen "this program can not find the Web page" appears.  I have to close it manually to display the desktop before entering for example or Google chrome.  How to get rid of the error screen?

  try to use "Autoruns for Windows" and check if there is a boot entry that is associated with your problem. If you do not disable an item at a time and restart the pc and isolate it.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Programs can not be started, or no response after the computer was not awake mode "Eve"

  Dear Sir.

  My lap top is under the VISTA system. Now the problem is that all programs can not be started or no response after the computer was not awake mode "Eve". I have to restart the computer to recover the computer to normal state.

  Please please let me have your advice to return to my email address: * email address is removed from the privacy *.

  Thank you very much!

  Eric

  Hi Eric,.

  You can follow these steps:

  Step 1: perform a clean boot to verify if an application or service is causing the problem.

  See this article for more information on the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

  Step 2: Configure the power settings for keyboard, mouse, and other devices.

  a. Click Start, click Control Panel, hardware and sound, and then click keyboard.
  b. click on the Hardware tab, and then click the properties button.
  c. click Change settings.
  d. click the power management tab and verify that the allow this device to wake the computer is selected.
  e. If "Allow this device to wake the computer" was not selected, select it and click OK.
  Follow the same steps for the mouse as well.

  If the problem persists, disconnect all non-essential devices (printers, scanners, USB drives). Restart the computer with only the original mouse, monitor, and
  connected keyboard. If this solves the problem of sleep/wake, one of the devices was causing the problem. Replace a device at a time and test to see if the
  problem occurs again. Continue adding devices and testing until you find the device that causes the problem.

  Refer to this article for additional troubleshooting steps.

  
  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista:
  http://support.Microsoft.com/kb/950686

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installed Windows 7. can not see my iphone on itunes. I have reinstalled itunes.

  Installed Windows 7. can not see my iphone on itunes. I have reinstalled itunes. I had this problem when I was with Vista. Help, please!

  Windows Update has nothing to with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Adobe *.pdf files can be opened in Internet Explorer, the default program can not be changed to acrobat reader in the properties or select 'Open with'

  Adobe *.pdf files can be opened in Internet Explorer, the default program can not be changed to acrobat reader in the properties or select 'Open with'. Cannot change the default program of Adobe in the file association list.

  I have the latest version of Adobe (9.3.3).

  Hello

  Don't forget to log on as an ADMINISTRATOR

  Use this utility to unassociate the. PDF and then re - associate with Adobe Acrobat Reader.

  How Unassociate a Type of Extension file in Vista and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  How to associate a file Extension with a program Type in Vistahttp://www.vistax64.com/tutorials/69758-default-programs.html

  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Bought Lightroom CC for 2 devices.  One installed fine but can not get the LIBRARY to work on the 2nd unit.  2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools.  If anyone can help.

  Bought Lightroom CC for 2 devices.  One installed fine but can not get the LIBRARY to work on the 2nd unit.  2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools.  If anyone can help.

  Thanks Tanuj,

  After reloading the software it seems to work now.

• I installed ChatZilla and can not find the program to run it.

  I downloaded ChatZilla and then restart Firefox to install it. I went to tools to try to run but I can't find Chatzilla and I can not find Chatzilla files anywhere on my sistem. How can I start chatting?

  Thanks, this was really helpful

• Upgrade to Firefox 25.0 today. Now I can not restart (hangs or blue screen; Win 7) but it starts in Mode safe mode OK and it starts in mode NML if Ive not running Ffx

  Upgrade to Firefox 25.0 today. Now I can't restart the computer (it crashes or goes to the blue screen; Win 7) but it starts in Mode safe mode OK and it starts in normal mode if I don't run Firefox since I finally started. This suggests that Firefox 25.0 installation done something for her. How can I proceed? Thank you, Jim.

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• Driver_irql_not_less_or_equal blue screen Vista and can not restart

  My PC Win Vista (not sure if 32 bit or 64) continues to display blue screen. Today, he continues to display blue screen when starting, and I can not even accept F8.

  Here's what it shows the blue screen before. Hope you could give me some advice what I can do next. Thank you!
  
  A problem has been detected and windows has been shut down to prevent

  damage to your computer.

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you have seen this Stop error screen, restart

  your computer. If this screen appears again, follow these steps:

  Check to make sure any new hardware or software is installed correctly.

  If this is a new installation, ask your hardware manufacturer or software

  the windows updates, you might need.

  If problems continue, disable or remove any newly installed or

  software. Disable the BIOS memory options such as implementing caching or shading.

  If you need to use Safe Mode to remove or disable components, restart your

  computer, press F8 to select advanced startup options, and then select

  Safe mode.

  Technical information:

  STOP: 0X000000D1 (0X00000000, 0X00000002, 0X00000000, 0X855F7395)

  nvstor.sys - address 855F7395 base at 855F3000, DataStamp

  46671a 61

  Hello

  nvstor.sys is a Nvidia video driver.

  Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
  methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
  programs may also cause this. Check the resolution of problems and when you get to the section driver view
  for generic methods in the next message and then back to the if necessary troubleshooting tool.

  Look in the Event Viewer to see if something is reported on.

  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  My troubleshootter of bluescreen generic, when you get to the section driver go to the next message, then
  return to this one.

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -----------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------------------
  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  ------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• installation problems, the program can not open in graphical mode

  I am trying to install a program on my laptop. InstallShield said his preparation, it says cannot open in graphical mode. try opening in the console or silent flag. -what it means and how do I get around it?

  Thank you

  Ray

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

• Satellite A100 - can not restart.

  I bought this mobile last year October and now when I try to restart, it will not restart but the fan works.

  Help, please. Must I send for repair?

  I bought this from www.buy-toshiba.co.uk and I have received everything but I have written notice of shipment I bought this laptop, but there is no price here. Serial number is written.

  Kind regards
  Alvin

  Hello

  just a question? Have you tried to reinstall your entire system (recover)? If this isn't the case, then I suggest you try this first, as it may be that you have just a software problem.

  Would be nice to have more information about your computer (installed a software, behaviour in particular situations, etc...)

  Welcome them

• INSTALL A PROGRAM DOES NOT START AUTOMATICALLY, IN VISTA WHERE THE COMMAND IS RUN?

  PROGRAM DISK DOES NOT START AUTOMATICALLY, IN MS VISTA WHERE THE COMMAND IS RUN OR HOW DO I INSTALL THE PROGRAM?

  Click Start > programs > Accessories > RUN.

  http://www.howtogeek.com/HOWTO/Windows-Vista/enable-run-command-on-Windows-Vista-Start-menu/

  Link above will help you.

  http://www.mydigitallife.info/2007/02/17/how-to-open-elevated-command-prompt-with-administrator-privileges-in-Windows-Vista/

  And this will interest you as well.

  See you soon. Mick Murphy - Microsoft partner

• Cannot install some programs-can't create the output file in the AppData\Local\Temp user account

  When I try to install a program (.exe) it works winzip Self-extractor, which attempts to create a file in the directory Users\ (myusername) \AppData\Local\Temp\setup.exe

  I just installed windows 7 and had to happen one or two times before that, I think, but I re-uploaded the file and I tried again and it ended up working. Now when I try to install this program (Hava), he says that it is unable to create the output file.

  When I try to go to this place it doesn't even have the AppData folder I have to first create this path or is it a problem with the program? Any help is appreciated. Touch Pro

  Well, that's possible. As WinZip SFX has a small option to overwrite without confirmation box.

  You can move forward with delete the file setup.exe from the Temp folder in the sound is no longer used by any program (where its in the Temp folder)

  You can also try now is, since its opening a WinZIP Self Extracting Archive, you can try manually, and manually specify where to extract the files before you click ok.

  Once you do this, just run setup.exe from the specified location.

• Satellite P10 554 stops after a few minutes and I can not restart

  Hello
  I hope someone can help me with my satellite P10 554
  When I start the laptop, everything is working fine a few minutes. the monitor turns black and the books suddenly stops. I can't restart, when I push the Start button, nothing happens.

  I have to wait about an hour and then I the starts again, but it works for a few minutes and stops again!

  Help me please, cause I need my phone to work!

  Hello

  From your description, I think your device overheat and go down because he cannot be cooled properly. P 10 satellite is older and it's time to clean up. You can't imagine how much dust inside the unit you will find.

  I put t know how are you familiar with this, but if you have no experience don t do it alone.

• May not start XP all we see is the arrow on the pointer on our screen... can not restart even in safe mode

  compuer ran great.
  do you have a small email campaign using mailchimp marketing
  everything was going well and next day compuer will not re-start.
  all we see is a blank screen and the arrow on the pointer.
  It does not restart in safe mode. When it goes to safe mode, we see is safe mode on move it left and right and some scrambled words on top. Thank you, Joe

  Joedir,
  Go through this post and make sure that you have tried all the listed items: http://social.answers.microsoft.com/Forums/en-US/xprepair/thread/901f9138-7a73-42f2-86ed-00c7fef3b77e

  If you still have a problem, then try starting mode safe mode with command prompt and run the following command: chkdsk/r http://support.microsoft.com/kb/315265 Mike - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.