Install problem 9.3.0 "the process cannot access the file.

After reader 7 stops dopening PDF files on my system, I removed and attepted to load 9.3.0, but this error at the end of the installation:

"The process cannot access the file because it is being used by another process.

File: C:/Documents and Settings/rsnyder/Local Settings/Application Data/Adobe/Reader 9.3/Setup Files / Setup.exe

ID info: 32.372.03.2.20041

Please send the Info ID and the name of the file to http://www.Adobe.com/misc/bugreport.html "

I uninstalled 7, rebooted, dleeted Adobe 7 records and made sure, there is no process of acro running.

Windows XP

I don't know why you get this. You can try the MSI installer instead of the EXE - download it from here http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3/enu/AdbeRdr930_en_US.msi

Tags: Acrobat

Similar Questions

Error: "the process cannot access the file because it is being used by another process." when treid to install the device driver

Original title: Windows cannot install the drivers

I had a lot of trouble installing the drivers on my Windows computer. I went straight in the Device Manager and deleted the devices I tried to install and reinstalled them, I went into safe mode, I got Windows to run the console and only the basic process and run from there Device Manager... no matter what I do the same mistake.

"The process cannot access the file because it is being used by another process".

Even after a restore of the system, he did this, and I don't know what to do anymore. Only devices that have been previously installed work.

What's more important install my Blackberry software because my phone is broken. The software cannot detect my phone because the drivers have not been installed. Most of the devices I can use with Linux (I have Windows Vista and Ubuntu running on the same computer), but RIM don't make Blackberry for Linux software, so I have to do it on Windows.

Hi paco2012,

1. did you of recent changes on the computer?
2. how many user accounts you have on the computer?

Try these steps and check the result.
Step 1: Install the driver as an administrator
a. shut down the computer runs.
b. start the computer and the connection as an administrator.
c. find the driver configuration file, right-click on the file and click "Run as Administrator".
d. follow the instructions in the wizard to install the driver.
e. restart the computer once the driver is installed.

Step 2: Try to install the driver to boot either by disabling all non-Microsoft programs
a. open the article: http://support.microsoft.com/kb/929135
b. Article, follow "step 1: perform a clean boot."
c. restart the computer.
d. install the driver and verify the result.
e. follow "step 7: reset the computer to start as usual.

Kind regards
Syed - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.

How can I fix this error: DF024: unable to preserve the original file to... Error 32 the process cannot access the file because it is being used by another process. SEQ (1352). ?

I install creative cloud desktop application Illustrator on a machine with windows 7 64 bit running in a domain environment. The download begins and takes about runs for a bout 10 minutes and then stops with error: DF024: impossible to preserve the original in "C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll" file error 32 the process cannot access the file because it is being used by another process. SEQ (1352)
I am logged on as network administrator, and there is no other apps except a web browser (Chrome) running. There is no other users logged in to the machine.
How can I see what another process is using the file necessary so that I can fix it?
Thank you

MelissaB34 if you continue to face the difficulties of installation, you can also try to use the CC cleanup tool to help ensure a clean removal of the software. You can find more information, as well as a link to download the CC cleaning tool, to use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

I want to save my outlook.pst file but get the following error message:-impossible to copy outlook: the process cannot access the file because another process has locked a portion of the file.

I want to save my outlook.pst file but get the following error message:-impossible to copy outlook: the process cannot access the file because another process has locked a portion of the file. How can I unlock it please?

You have Outlook open when you save? You need to close.

Hope this helps

Post back if necessary

___________________________________________________________

If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

System 32 error (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied))"

Original title: svchost (1020)

Event type: error
Event source: ESENT
Event category: general
Event ID: 490
Date: 2010-10-19
Time: 14:51:34
User: n/a
Computer: ROB
Description:
Svchost (1020) an attempt to open the file "C:\WINDOWS\system32\CatRoot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb" for read / write access failed with the error System 32 (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied)).

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Hi Robrw,

1. when exactly you receive this error?

2. don't you make changes to the computer before this problem?

You can try to rename the catroot2 folder and check if it helps.

Step 1:

a. Click Start and in run type C:\windows\system32 and click ok

b. find the Catroot2 folder. Right-click on Catroot2 and rename it to Catroot2.old

If you are not able to do the normal mode, try to start in safe mode and rename

Check out the link for more information on starting your computer in SafeMode below:

http://support.Microsoft.com/kb/315222

Step 2:

If you are unable to access the catroot2 folder, and then try to change the permissions on the files and check if it helps.

See the following article:

How to capture a file or a folder in Windows XP

http://support.Microsoft.com/kb/308421

Step 3:

You can also try to temporarily disable third-party security software and firewalls and check what is happening.

Note: Activate the security software after the resolution of the problem.

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

RunDLL__Error C:\windows\system32\sshnas.dll___The loading process cannot access the file because it is being used by another process.

When I start windows Vista, I get the error message:

RunDLL
Error loading C:\windows\system32\sshnas.dll

The process cannot access the file because it is being used by another process.

How can I fix?

Hello

It is the result of malware, then do a very thorough check and when the system is
clean see the following message to remove this error.

If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.

No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.

It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.

Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_free

Run the malware removal tool from Microsoft

Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)

Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

Microsoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

also install Prevx to be sure that it is all gone.

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp?prevx=Y <-->

Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

Try the demo version of Hitman Pro:

Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro

--------------------------------------------------------

If necessary here are some free online scanners to help the

http://www.eset.com/onlinescan/

-----------------------------------

Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htm

Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx

----------------------------------

http://www.Kaspersky.com/virusscanner

Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

--------------------------------------------------------

Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.

Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-----------------------------------------------------------------------

If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

I hope this helps.

Rob - bicycle - Mark Twain said it is good.

a problem with one of the files in the TestStand\AdapterSupport\LabVIEW directory

When looking at the module a LabVIEW VI called for TestStand, I get the following message:

A problem with one of the files in the TestStand\AdapterSupport\LabVIEW directory. Please reinstall or repair.

I made the mistake of cleaning C: in my computer. Clean the C:\National Instruments downloads

Why would someone put bits of applications or modules, etc. in such a directory?

I'm not too crazy about restoring 11FR in this folder. It's just crazy!

If anyone has encountered this before? No "easy"? outside re - install TS...

Side note: I do not touch anything in the \Program files. National Instruments\TestStand\AdapterSupport\LabVIEW

What version of LabVIEW and TestStand do you use?

In 2012, TestStand, this directory is mapped to:

C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 2012\AdapterSupport\LabVIEW

Have you tried mass compiling the screws in this folder?

I had to create a new 'TestStand - default values XX.llb"file, where XX is the last version of LabVIEW you use, but I have not seen this message before.

Good luck

PH

0X803C0107 error: you cannot access shared files and printers and the MSE does not start at startup

Original title: mainly MSE does not start at startup. have you tried re-loading and other elements on the card, still no luck. Here is the error code I have and the information complete.

Remember - this is a public forum so never post private information such as numbers of mail or telephone!

Ideas:
- Error 0X803C0107
  
  Details of the editor for Windows Firewall troubleshooting
  
  Verified issues
  
  You cannot access shared files and PrintersYou cannot access shared files and printers
  
  You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445. Checked
  
  No workingRemote Assistance remote assistance does not
  
  When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance. Checked
  
  Windows Vista may not start Windows Vista FirewallWindows could not start the Windows Firewall
  
  On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned. Checked
  
  Windows Firewall service is not his firewall service is not started
  
  Windows Firewall service is not running or is not started. Checked
  
  Issues checked the details of the detection
  
  6 you cannot access shared files and printers checked
  
  You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445.
  
  Unlock the file and printer sharing in Windows Firewall works not
  
  To allow access to shared folders and printers, except for the file sharing and printers in the Windows Firewall must be enabled.
  
  6 remote assistance works not verified
  
  When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance.
  
  Allow Remote Assistance in Windows not running Firewall
  
  Which allows Assistance remotely as an exception in Windows Firewall it unlocks and corrects this problem.
  
  6 Windows Vista could not start Windows Firewall check
  
  On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned.
  
  Set permissions for the registry keys concerned not run
  
  Setting permissions for the registry keys concerned will solve this problem. Applies only to computers by using Group Policy to manage the firewall.
6 Windows Firewall service did not start Checked

Windows Firewall service is not running or is not started.

Start the Windows Firewall service is not running

Start the Windows Firewall service solves this problem.

Details of detection

Collection information

Computer name: NORMBRESINSKI

Windows Version: 5.1

Architecture: x 86

Time: 09-20-2010 07:51:49

Publisher details

Troubleshooting Windows Firewall

Automatically fix problems of Windows Firewall, such as Windows cannot start the firewall service (0x5) Windows or Windows remote assistance does not work

Package Version: 1.0

Publisher: Microsoft Corporation

You have problems with programs
Error messages
Recent changes to your computer
What you have already tried to solve the problem

Hi Rickbsk,

You can check out the link and check the suggestions provided by scotty1294.

http://social.answers.Microsoft.com/forums/en-us/msestart/thread/05a63b12-1be9-4BD3-898e-64674c1e9afd

If you have not tried all the suggestions above, try and see if it helps.

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

I just want to know if there is a problem if I delete the files '%Temp%' race

Hey guys, I just want to know if there is a problem if I delete the files '%Temp%' run! ???

Free disk space

Last updated 18/01/2014

Content
- To see how much space you have used and free
- To see where the files are too much space
- Disk Cleanup
- System restore
- Fix the basket
- Fix temporary Internet files
- Delete files in the system and the folder Temp of Service Profiles
- Check the size of the swap file
- Disable the hibernation
- Compact the Windows databases use various
- Delete the files updated by the Service Pack
- Move your Documents
- Remove saved files created by Photo Gallery
- Which extends the size of the disk
- Compress files
- Turn off the low disk space warnings
- Boost disk cleanup
To see how much space you have used and free

Start - All Programs - Accessories- Click with the right button on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

For the system drive

WMIC volume where (DriveLetter = '% lecteur_systeme %') are legend, capacity, freespace List

For all readers

WMIC volume get/all, freespace, the ability, the legend

If you want to store this info on your desktop

WMIC /append:"%userprofile%\desktop\Free on disk space" volume get Caption, freespace format:htable

To open double click on Free Disk Space on your desk or type

Start "" "%userprofile%\desktop\Free report.HTML of disk space.

Then come back here after cleaning and repeat these commands to see the difference.

If for any reason, the wmic command does not work, use these two commands. Both take a lot of time.

% Lecteur_systeme % - one defrag

or

dir %systemdrive%\*.*/a/s

To see where the files are too much space

It lists the number of files and the size of the folders on your drive. Each command is a subset, so you can run it better.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

Then configure the command prompt. Right-click on the tab of the titlebar - Properties - Layout command prompt - and enter 1000 screen buffer size height and 43 (or 50) to Window Dimensions height. Change the color (color tab) and the police (police tab), if you want.

To see the size of the folders in Documents, excluding images, video, or music files.

for /f "Skip = 2 tokens = 3 ' set doc = A %%A in ('Reg query"HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"/v"Personal"")

for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "\/"^|findstr/l/v "photos video" ') @echo %j & echo. "

To see the size of the folders in the music.

for /f "Skip = 2 tokens = 4" %A in ('Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v 'My music' ") set Doc = A %

for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

To see the size of the image files.

for /f "Skip = 2 tokens = 4" %A in (' Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" "My pictures" /v ") set Doc = A %

for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

To see the size of the files in the video.

for /f "Skip = 2 tokens = 4" %A in ('Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v 'My videos' ") set Doc = A %

for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

To see the size of the files on the desktop.

for /f "Skip = 2 tokens = 3 ' set doc = A %%A in ('Reg query"HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"/v"Desktop"")

for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

To see the size of the files in the Windows folder.

for /f "usebackq tokens = 2 * delims =" %i IN ("'%windir%' dir /a /s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

To see the size of the files in the Program Files folder.

for /f "usebackq tokens = 2 * delims =" %i IN ("'%ProgramFiles%' dir /a /s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

Disk Cleanup

To run Disk Cleanup, normal is to click with the right button on the drive in my computer (Start menu - computer), then Properties - general tab - Disk Cleanup button.

Another way is menu Start - All Programs - Accessories - System - Disk Cleanup tools.

Disk Cleanup can be started from the command line.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

To make your primary drive.

cleanmgr letter

Choose which lead to do.

Cleanmgr

See the last section of this post to see how to performance of disk cleanup.

System restore

With disk cleanup displays above the Other Options tab. You can delete all but the last System Restore point and see if that is too much space.

System Restore uses 15% of the space normally. Change click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit and navigate to

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg

Double click on DiskPercent and click on decimal and change the value to the desired percentage,

You can change the command prompt.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

To see the size of the system restore folder.

You don't normally have access to this folder. You will need to take possession, allow administrators to permission, then the size of the query.

takeown /f "%systemdrive%\System Volume Information" / a r d y

ICACLS "%systemdrive%\System Volume Information" / grant administrators: f, t, c, q

dir "%systemdrive%\System Volume Information" / a/s

To see the current percentage

Reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg" /v DiskPercent

It is in hexadecimal. The numbers are 0-9 and a-f. So 0xf is 15. 0x5 is 5, 0 x 9 is 9, 0xa is 10, 0 x 14 is 20.

To set a different value.

You can use decimal values to set. This affects 10% (in bold in the example and the last item in the line).

Tracking Add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg" /v DiskPercent /t REG_DWORD /f /d 10

To repair the system restore, file delete and restart the system restore.

SC stop vss

takeown /f "%systemdrive%\System Volume Information" / a r d y

ICACLS "%systemdrive%\System Volume Information" / grant administrators: f, t, c, q

e "%systemdrive%\System Volume Information" / q/s

SC start vss

Fix the basket

Sometimes, files get lost in the trash. Remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.

Empty the trash.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

To see the size of the files in the Recycle Bin

It must have one or no files inside if you work. There should be a directory (folder) by user.

dir % systemdrive%\$RECYCLE. BIN\ *. * /a /s

To reset the trash

e % systemdrive%\$RECYCLE. BIN/s/q

Fix temporary Internet files

Sometimes, files get lost in the temporary internet files folder. Delete the files. It will be automatically recreated the next time download you. It will remove the current user only.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

To see the temporary internet files size empty files folder

RunDll32.exe InetCpl.cpl, ClearMyTracksByProcess 8

dir ' %userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\ *.» * ' / a/s.

Then delete.

First close Internet Explorer. Some files may not remove at the moment, they can be deleted later.

"%userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files" del /s /q

So to see the new size.

dir ' %userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\ *.» * ' / a/s.

To see the size of the cache, type the following

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

Reg query /v "Settings\5.0\Cache\Content Software" CacheLimit valid

Use the calculator to convert hexadecimal into decimal. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter the value returned above. Menu display - decimal. To convert windows units divide by 1024 for kilobytes, divide by 1024 megabytes.

Located between 50 MB and 250 MB. You can use decimal here. The unit is expressed in kilobytes. Here it is 250 megabytes (250 000 x 1024 bytes)

Add tracking 'Software Settings\5.0\Cache\Content' v CacheLimit valid /t Reg_DWord /d 250000 f

Delete files in the system and the folder Temp of Service Profiles

The system temp folder is only used when no one connects. It is rarely used but never cleaned. Some services have their own temporary folder which is also cleaned.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

To the list

dir c:\windows\temp C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp/a/s

To remove

del C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\*.* C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp\*.* c:\windows\temp\*.*/s/f/q

Check the size of the swap file

As a rule generally you want to your swap file slightly larger than the amount of memory that you have. It develops automatically but spread automatically. If you use hungery memory programs as this video editing should be bigger. If too big you can reduce and rush of space can be moved to another drive.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

To see what was your use

WMIC pagefile get List

To see the size of the file on disk

dir /a c:\pagefile.sys

To change the size or change the road see change the size of virtual memory in Start - Help and Support.

Disable the hibernation

The file shows up is the same size of installed memory. If this is not the case, turn off the computer in hibernation and save a lot of disk space.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

To see if it is on

If the file will be found. If off the file won't be there.

dir %systemdrive%\hiberfil.sys /a

To turn off

powercfg-h off

Make a u-turn

powercfg-h on

Compact the Windows databases use various

You can compact the various databases that Windows uses. This is the Windows Update, Windows Search, and certificates of security, Windows Mail, Windows Contacts, Windows, Windows Live and Internet Explorer ver 10 applications calendar.

Close Windows Mail and Internet Explorer. Wait a minute for Internet Explorer release locks of sound files.

See how much space taking up type which is below and note the total size (because it scrolls away).

Start - All Programs - Accessories- Click with the right button on command prompt and choose Run As Administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat c:\catdb/a/s

Then at compact

SC stop wuauserv

stop bits SC

SC stop wsearch

SC stop cryptsvc

for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat catdb *.) do esentutl.exe /p "%A" / o

for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat catdb *.) do esentutl.exe /d "%A".

SC start cryptsvc

SC start wsearch

SC start bits

SC start wuauserv

Then to delete some temporary files.

del c:\*.integ.raw c:\TEMPDFRG*.edb/s

To see the new size and compare it to the old size

dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat c:\catdb/a/s

If a program has a file open, you can use this procedure to find out which program.

openfiles/local on

Reset

openfiles/query /v | findstr /i "WebCacheV [0-9] *------catdb \.edb \.msmessagestore .dat".

Delete the files updated by the Service Pack

See how much space taking up type which is below and note the total size (because it scrolls away). Also, note that the total is higher than it actually is.

This will remove the ability to uninstall service packs.

According to the service pack that Windows was provided with you can have both, one or none of these two files.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

dir /a /s c:\Windows\WinSxS

Then type

Vsp1cln.exe

COMPCLN.exe

To see the new size and compare it to the old size

c:\windows\WinSxS dir /a /s

Move your Documents

If you have another disk, you can move the documents folder to it.

Click with the right button on your Documents (or pictures, etc.) Office, videos, Contacts,) the tab file - Properties - location - move.

Delete the thumbnail and icon Caches

These files can contain thumbnails or icons of files deleted a long time ago. The files will be recreated if necessary.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste). The desktop and the start menu will disappear briefly.

To see the size

dir "% userprofile%\AppData\Local\*.db" "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db" /a

then remove

Taskkill /im explorer.exe/f
attrib - r s h '% userprofile%\AppData\Local\*.db '.

attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.
del "% userprofile%\AppData\Local\*.db".
del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".
Explorer

to check the new size

dir "% userprofile%\AppData\Local\*.db" "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db" /a

Remove saved files created by Photo Gallery

Photo Gallery Windows makes a copy of any file that you are editing. Click Start - All Programs - Accessories - (or press the Windows key + R). Type

Images of the hull: original

Delete the ones you don't want.

Which extends the size of the disk

If all the space on the disk has not all been used it is possible to extend your drive.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

DiskPart

then type

Select the c volume:

Then type to see in size

the list volume

then (it will work if possible or not as appropriate)

extend

type to display the new size

the list volume

then type exit

output

If you want advice on the extension of the partition type the following and paste the result back

DiskPart

list disk

the list volume

Select disk 0

partition from the list

Select disk 1

partition from the list

output

To copy the final text right click in the window - Mark , then select the text and press enter.

Compress files

There are two ways to compress files in windows. Zip files and built-in file compression. It's built-in file compression. For more information on compression type zip in Start - Help and Support .

Photos, music and video are already compressed. They can get larger if Windows tries to compress it any further. Also usually a bad idea to compress system files.

If you have files of worksheet they can very well be compressed. If you have files, installation files, they can also be good candidates. Web pages are also good candidates.

In Windows Explorer, blue file names means Tablet (it is the file system compression not aka zip files compressed files). Green filename means Encrypted.

To disable file names colored, in Explorer - Tools menu (Alt + T)- display tab and then clear the check box for Show encrypted or compressed NTFS in color .

Windows compression, encryption and security to work for the most part by applying attributes to a folder and the files in the folder inherit the folder.

If you have all the files appropriate for compression, find them in solution, made Explorer right click - Properties - general -Advanced button tab - Compress contents to save disk space. Choose to apply to all files and folders when asked.

To use a command line to compress the files in the Favorites folder.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

compact/c /s:"%userprofile%\Favorites." *

Put in Favorites to compress files added

compact/c /s:"%userprofile%\Favorites.

To view the details of the compression of the Favorites folder

Compact '% userprofile%\Favorites\*.* '.

Turn off the low disk space warnings

To disable the function to display the disk low space warnings.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer" v "NoLowDiskSpaceChecks" /t REG_DWORD /d 1 f

gpupdate/force

Boost disk cleanup
- Operation of disk cleanup
- Schedule disk cleanup
- Creating custom cleaners
To see a list of products of cleaning disk cleanup.

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

@echo. & @echo list of cleaners&@echo = & FOR /F "usebackq tokens = 8 delims =-' %i IN ('reg query 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\VolumeCaches'") @echo %i
```
 List of cleaners
 ================
 Active Setup Temp Folders
 Content Indexer Cleaner
 Downloaded Program Files
 Hibernation File
 Internet Cache Files
 Memory Dump Files
 Microsoft_Event_Reporting_2.0_Temp_Files
 Offline Pages Files
 Old ChkDsk Files
 Previous Installations
 Recycle Bin
 Setup Log Files
 System error memory dump files
 System error minidump files
 Temporary Files
 Temporary Setup Files
 Temporary Sync Files
 Thumbnail Cache
 Upgrade Discarded Files
 Windows Error Reporting Archive Files
 Windows Error Reporting Queue Files
 Windows Error Reporting System Archive Files
 Windows Error Reporting System Queue Files
 WLX Thumbnail Cache
```

Cannot access a file with a padlock in the icon.

Cannot access a file with a padlock in the icon.

I created a file using an application called TV Expert (download the file of my Cam handy Sony Hi-8 on PC). I can access the file by using the software, but cannot access the file using Windows Explorer. The location of the file is c:\Program Files\TVExpert\Movie.

The file size is about 3.6 GB , when I check the size of the Explorer folder it sows 0 bytes .

When I open the file using the TV Expert software I see a Pad lock symbol in the icon of the file

I want to copy the file to another location so that I can edit the file.

Try this: right click on the file > do you see in unlock general tab button? If so, click it.

...

If it does not help...

What happens when you try to copy this file to another location? Do you take information that it can be done by the administrator? If Yes, there should be a continue button, so click it.

You can also try this: right click on the file > Properties > Security tab. Who is listed under group or user names ? Is your user name? If not, you can click on change... > Add... > enter your username > OK

BlackBerry Smartphones "Cannot access local files" error when syncing with Outlook

I have an old BlackBerry Bold 9780 which works well. However, just yesterday, I started getting a "Cannot access local files" error when you try to use BB Desktop to synchronize with Microsoft Outlook 2016. I uninstalled and reinstalled the BlackBerry Desktop Software 7.1, but the problem persists. There is no error when using Outlook or other aspects of synchronization in BB Desktop.

I am running 64-bit Windows 10 on my desktop computer. I got no synchronization issues in the past until yesterday. To my knowledge, nothing has changed.

A Google search for the error message returns questions posted on several different forums, but there is no clear solution given.

The problem seems to be in Outlook, rather than with the BlackBerry Desktop, at least in my case. I solved it by repairing my Microsoft Office installation. For most versions of Office, this is accomplished by going to the list of programs installed in the Control Panel, highlight and right-click on the desktop and select the option to repair or change.

BlackBerry Smartphones "Cannot access local files" error when syncing with Outlookl

I have an old BlackBerry Bold 9780 which works well. However, just yesterday, I started getting a "Cannot access local files" error when you try to use BB Desktop to synchronize with Microsoft Outlook 2016. I uninstalled and reinstalled the BlackBerry Desktop Software 7.1, but the problem persists. There is no error when using Outlook or other aspects of synchronization in BB Desktop.

I am running 64-bit Windows 10 on my desktop computer. I got no synchronization issues in the past until yesterday. To my knowledge, nothing has changed.

A Google search for the error message returns questions posted on several different forums, but there is no clear solution given.

The problem seems to be in Outlook, rather than with the BlackBerry Desktop, at least in my case. I solved it by repairing my Microsoft Office installation. For most versions of Office, this is accomplished by going to the list of programs installed in the Control Panel, highlight and right-click on the desktop and select the option to repair or change.

Cannot access control files
I have a Setup to RAC two nodes using ASM. I did test on it, and when I rebooted my second node, that he started the instance to the second node. I tried to do a manual start via sqlplus and got this error in the subject "cannot access control files. I checked the log of alerts for this node and that was in the background:
Wed Jul 10 14:32:55 2009
ALTER DATABASE MOUNT
NOTE: library loaded: /opt/oracle/extapi/64/asm/orcl/1/libasm.so
NOTE: the loaded library: System
SUCCESS: diskgroup ORCL_DATA rose
ORA-00210: could not open the specified control file
ORA-00202: control file: "+ ORCL_FLASH_RECOVERY/orcl/controlfile/current.256.688686291".
ORA-17503: ksfdopn:2 could not open the file +ORCL_FLASH_RECOVERY/orcl/controlfile/current.256.688686291
ORA-15001: diskgroup 'ORCL_FLASH_RECOVERY' does not exist or is not mounted
ORA-15001: diskgroup 'ORCL_FLASH_RECOVERY' does not exist or is not mounted
ORA - 205 marked during: ALTER DATABASE MOUNT...
SUCCESS: diskgroup ORCL_DATA has been removed
Wed Jul 10 14:36:03 2009
NOTE: Process of FILIPE out due to lack of activity file ASM for 186 seconds
Stop background RBAL process

I get what the output of this file but when I do a list of oracleasm disks he found all four volumes and I can browse the DSO via asmcmd. Any ideas or suggestions?
Your diskgroup 'ORCL_FLASH_RECOVERY' climb or not... (Please check to ASM)

on Node2:
$ export ORACLE_SID = + ASM2
$ export ORACLE_HOME = 'Oracle chemin_installation for ASM.
$ sqlplus / as sysdba

SQL > select NAME, STATUS from v$ asm_diskgroup;

If no editing, try... and check error

SQL > alter diskgroup mount ORCL_FLASH_RECOVERY;

If error, please post it... If it is ok, then start again ;) database

$ export ORACLE_SID = DB2
$ export ORACLE_HOME = 'Oracle chemin_installation for DB.
$ sqlplus / as sysdba
SQL > shutdown
SQL > startup

nothing else... If you drive support group (you can use "asmcmd" ASM access and check the control file)

$ export ORACLE_SID = + ASM2
$ export ORACLE_HOME = 'Oracle chemin_installation for ASM.
$ $ORACLE_HOME/bin/asmcmd

ASMCMD > cd controlfile/orcl/ORCL_FLASH_RECOVERY /.
ASMCMD > ls

....

Good luck

When install or remove a product, get error cannot access the windows installer

Whenever I'm installing an update or remove a product, I get the message "Cannot access Windows Installer"

Hello

·        What are the programs you are trying to install on the system and updates?

·        Have you managed to install the updates before on the system without any problems before?

·        Remember to make any change to the system?

I suggest you follow the steps mentioned below.

Method 1:

I suggest you to check in services if the service Windows install is set to automatic. Follow the steps mentioned below.

a. Click Start--> Run--> "services.msc" [press on enter]

b. scroll down and find "Windows Installer".

c. right-click on it and choose "Properties".

d. on the properties page, verify that the "Startup type" is set to 'Automatic'

e. confirm the "Service status" is "started."

f. click "OK".

Method 2:

I suggest you unregister re-register Windows install and check if it helps. Follow the steps mentioned in the article below.

Error message "Could access the Windows Installer Service" when you install the application

http://support.Microsoft.com/kb/319624

Method 3:

I suggest you to reset the windows update components and check. Follow the steps mentioned in the article below.

How to reset the Windows Update components?

http://support.Microsoft.com/kb/971058

Method 4:

I suggest you to download and install Windows install from the link below and check.

Windows install 4.5 Redistributable

http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

I suggest you follow the steps mentioned in the articles given below for further assistance.

Error message "Could access the Windows Installer Service" when you install the application

http://support.Microsoft.com/kb/319624

How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

http://support.Microsoft.com/kb/2438651

Thanks and regards.

Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think.

the process cannot access the file because it is being used by another process

Hi, hope someone can help with this,

I am running windows vista basic 32-bit on a dell inspiron 1520

I received several messages a day saying "superfetch has stopped working" or "windows search protocol has stopped working" I was advised to run sfc/scannow from command prompt I did the sfcdetails read as follolws.

2010-09-15 13:55:16, Info CSI 00000185 [SR] cannot repair the military record [l:24 {12}] "cryptsvc.dll" Microsoft-Windows-cryptsvc-dll, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "

Following the advice of another thread, I extracted the file from my Vista DVD and stored in c:\windows\temp, but when I try to copy in c:\windows\system32 I get a message saying that the file is being used by another process.

I'm not sure what the file is still so I don't know how use it.

Any help would be much appreciated.

Thank you.

The file in the folder system32 first TakeOwnership. Then copy from a command prompt with admin rights:

http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

Install problem 9.3.0 "the process cannot access the file.

Similar Questions

Maybe you are looking for