Install Via USB

Similar Questions

• HP Deskjet 6980 will not install via USB or network

  I've recently updated my PC with a new mother/case/CPU card, etc. and trying to set up my Deskjet 6980 he tries to install two separate drivers.  One is named HP Deskjet 6980 DOT4USB and the other just HP Deskjet 6980.  Dot4USB installation is complete, however the drivers for "Hp deskjet 6980" fail.  The printer indicates only in my "devices and printers" as "HP Deskjet 6980" with an icon of troubleshooting.  whenever I run troubleshoot it tells me I need to install the drivers.  He's trying to install the drivers through troubleshooting or Windows Update every time, she fails.

  I tried to uninstall all instances of the name Deskjet from my computer, turn off the printer, restarted my computer and then turn on the printer/plug again for the same results.

  I plugged my printer on the network and while my laptop has no connection/printing problem, when I try to add it as a network printer in "Devices and printers" it gives me an error message saying "unable to install.  "Double check the name of the printer and make sure that the printer is connected to the network.  I tried both options "Use the driver is installed" and "replace the driver" and both give me the cannot install message.

  Some tips on what might be the problem or how to fix?  I downloaded each item including HP Deskjet 6980 on site without success.

  Windows 7.  As mentioned, the printer works perfectly when connected to my laptop via USB or wireless connection, my PC just does not want to connect via either.

  HP Print & Scan doctor tells me that I must not get the installer of your website, however there is no installer for Deskjet 6980.  The "Printer Install Wizard" & "Hardware diagnostic utility" mean that the printer is not supported by the software.   When I plug in the printer it goes through the process of installing driver as follows:

  

  I tried the update through troubleshooting, Windows Update and even to get the file on the Microsoft Web site (pg no longer exists). I thought about trying to find the driver on my laptop, but I'm not sure the actual name of the file what.

  * EDIT *.

  Looks like I solved the problem myself.  I don't know why, but my printer has appeared only at random in my Uniblue DriverScanner program (it would not be displayed when I looked before).  I was able to download & install from program Driverscanner and my printer works perfectly.  A strange question, but at least it was an easy fix.

  Thank you.

• print - Laserjet P1102w - new install via USB

  I tried twelve ways to Sunday to get my new Laserjet P1102w to print.  The installation, which took place today, seems to agree.  I've uninstalled and reinstalled the software a couple of times.  A test page is quickly obtained at the end of each facility.  But when I try to print a document, it never makes it to the printer.  Rather, bunch printing just straight up in a queue in the printer on the computer dialog box that clear periodically.

  I ran the HP diagosntic tool.  He told me that everything is fine.

  I installed the printer to an HP Optiplex running Windows7 64 bit.  It is on a network, but I have deskadmin access.

  All the lights on the printer appear to be in good condition.  Nothing that connects, just a light green continuous.

  The question is, why I can not get print comands to my computer (where they appear in the queue) to the printer.

  At one point, I was wondering if something was wrong with the USB cord.  It's long, 16 feet.  But it works well enough to produce the test page to each facility.

  Any advice will be GREATLY appreciated.

  Thank you.

  Minonk

  HI Minonk,

  The connection peut be at fault; the fact that you can get this test page to print means that it is probably OK.  If you can swap a new cable, try this after everything and maybe move the printer more ready for a test.  Again, that is if all other fails...

  Try restarting the spooler.  There are two ways to do this.  You can buy - they're basically the same thing and it's just a matter of which the way is most comfortable for you.

  -------------------------------------------------------------------------------------------------------------------------------------------------

  Control Panel > display icon > Administrative Tools > Services > scroll down... look for > Print Spooler > click on restart the Service

  OR

  • Start > search / type > "cmd" > click on "Cmd.exe".
    Type net stop spooler , and then press the enter key

  Box: If you delete the queue print jobs, you can do this here with:

  • Type del %windir%\system32\spool\printers\*.*/q , and then press the enter key

  Note: the only spaces in this command is a single space between led and % and a single space between * and / q

  • Type net start spooler , and then press the enter key
  • Type exit , and then press enter to exit Cmd.exe

  ---------------------------------------------------------------------------------------------------------------------------------------------------

  It's my pleasure to help.

  Say "thank you!" to the help by clicking on the star of Kudos to show your appreciation for the help.

  Fixed?  Mark this message 'accept as Solution' to help others find the answers.

  Note: You can find "Accept as Solution" only on the threads started by you.

• HP M1212nf Mfp printer installed via USB Port

  I checked all my software and hardware, but when I install the printer using the printer installation disc works. But when I turned my computer off and restart the computer, the printer does not print. The printer indicates a default printer and the printer says ready, but I get nothing. I can re-install and get it printed, but it disconnects when I turn off my computer. I have another printer Dell I can go to and it will be printed, but HP will not.

  HP printer to a USB port facilities requires installation of driver CD must be started before the printer is connected to a USB port.

• What happens if I leave the battery while facebook is installed via USB on a 9300 with os6 smartphones blackBerry?

  It has a red X on the battery icon and I can't remove the battery because the desktop software says do not disconnect it during installation. But it has been more than 15 min & its still like that. Should I remove the battery or leave it? It will be usable if I leave the battery. It was ONLY facebook being installed, he always says to wait until the initialization of devices

  If the application is installed and that you unplug your device OS with force could get damaged. As it is on facebook only you should consider pulling the plug. If things solve then you will have no choice to meet.

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• How to install Windows XP on my NetBook via USB

  Can you tell me how to install Windows XP on my NetBook via USB as there is no CD to my Samsung N100 NetBook?

  Go to the Samsung's Web Site, click on the "Support" link and find/download a manual for your computer.  Somewhere in the manual (sometimes in the appendix) the procedure of installing Windows XP on your model will be explained.  However, having said all that, my bet on the response from Richard Harper and you will probably have to you beg/borrow/steal/buy an external USB CD-ROM drive.

  HTH,
  JW

• Photosmart 7960 installed via the USB port on the PC under Win XP Pro acting as a print server

  I have a PC running Windows XP Pro, which acts as the home network file and print server.   The Photosmart 7960 is connected to this computer via a USB cable and configured to be "shared".   When I go to "Add a printer" on another PC, in Windows 7, which is also part of the same network, I can navigate to the 7960 correct, but the installation wizard is unable to find the driver for Win 7.  I still have what in the HP see basic documents that tells me how to add this shared printer on my Win 7 PC.  Looking at the support page drivers I saw that Windows 7 already has the driver.  True, but the only way, it seems that I can get to it is to connect the printer directly to Win 7 PC via a USB cable.   Any suggestions?

  Apparently, the solution is as follows.  First connect the photosmart 7960 directly to the PC running Windows 7 via USB cable network.  It will be auto-install drivers.  Reconnect the printer to the PC under XP pro server.   From the PC running Windows 7 where you have installed the printer via USB, you can go ahead and remove the photosmart 7960 from the list of printers; This will not remove the just downloaded drivers.  Next, select Add a printer, and then select 'Add a local printer' (no network).  Select 'Create New Port' and click Next.  In the next dialog box, type the name of the host server and the name of the printer.  In my case, it's \\mainserver\HP photosmart 7960. Click Next.   In the "Install the printer driver" dialog, click "Hewlett Packard" and find the 7960 in the printer list and click Next.  I was able to successfully install the printer this way.

• install app via usb error on first installation poster

  Hi all

  I install my app via usb and when I install the first error I get below...

  "

  Error in the final launch sequence

  Impossible to prepare and upload the binary file

  Could not locate the application process. The application may not have launched successfully. Please check the device for pop up windows or newspaper of records relating to this issue. »

  and when I reinstall again the error is gone and it works very well...

  any help in this regard will be greate,

  Thanks in advance...

  The first time you run the application, he was arrested at the start while the permissions screen is shown.  After accepting the guest of permissions, the application runs.

  You see she comes after the expired debugger trying to connect to the application, which was probably interrupted while the authorization screen was exposed.  This screen is not shown beyond the first launch.

  If you accept the permissions quick enough you can ignore this error in the first inning.

• Would I be able to communicate via USB without having to install the Desktop Manager?

  Here's my situation. My company has a software product for the office that communicates with a telephone connected via USB. Currently, it is a prerequisite to install the BlackBerry Desktop Manager to be able to use the ability to synchronize our software.

  What I am wanting to know is, somehow I was able to realize USB communication without having to install the Desktop Manager? Another question I have is, if it is possible to do this without having to install the Desktop Manager, would there be legal issues that should be considered in what concerns the packaging of the bbdevmgr as well as my package of office software?

  don't know, but I do not.

  It is the second hit on google for "blackberry usb driver.

  https://www.BlackBerry.com/downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22&CPID=OTC-SOFTWAR...

  great entry in this list.

• I installed a USB device to a radio control. I have a total control, but cannot activate the audio in and out via USB

  I installed a USB device to a radio control. I have a total control but fail to activate the audio in and out via the USB port. The device does not appear on audio routing options (left click on the logo of the speaker), any ideas please?

  Tim, first read the whole message!

  (This after below is complete) Remove all usb drivers and charging system leave, after reboot, make sure that the item in question is connected before the reboot.

  Follow the steps 1, 2 and 3 below.

  1: make sure you use Win7 SP1 and all updates are current and responsible.

  2: after insurance above, go to Device Manager and remove all THE USB drivers. Don't worry, it will reload.

  3: reboot then System Device Manager will research and required load all the drivers.

  He must find all the items. If it does not investigate that in question is Win7 really compatible, 100%.

  If 100% Compat. with Windows7 should find!

  (Also make sure that the automatic Windows upgrade and install is enabled for software and hardware drivers)

• Just installed prem 14 can enter via USB as my box of film (firewire declined and I can't find a replacement

  Just installed prem 14 I can input via USB as my box of film (firewire has fallen, and I can't find a replacement)

  derekr

  What do you do - firewire to DV or HDV capture in the Capture of the first elements window?

  If this is the case, you can do that 14 and first elements 13/13.1 because the characteristics were interrupted by Adobe.

  The latest version of Premiere Elements that has this feature is first elements 12/12.1.

  Please refer to the following Adobe on this situation and the workarounds proposed document.

  Removed the unsupported file formats and features. Adobe Premiere Elements 13

  You can also consider doing firewire to DV or HDV capture in other applications and then import catches in the Premiere Elements project with first elements 14 Expert workspace add active media/files and folders/projects to timeline

  For Windows...

  DV, see WinDV WinDV

  HDV, see HDVSplit HDVSplit 0.77 beta

  Please consider the above and provide more details so that I can be sure to target the information you are looking for.

  Thank you.

  RTA

• iPhone 5 c will not charge via USB on the laptop?

  Hi all.

  I have an iPhone 5 c and as about a week ago, does not charge via the USB port on my laptop. He sees very well in my wall sockets and Sockets USB as well, but not in my laptop. I have an Acer laptop running Windows 7. Windows is up to date, iTunes has the latest version installed. Whenever I plug in my phone, one of the following conditions occurs:

  (1) does not have

  (2) noise "plugged" USB lights, the window on the lower right, tell that a USB device has malfunctioned

  (3) (rarely) of phone calls after I tried several things

  What happened is I would plug my phone, she would charge via USB, iTunes opens automatically, and "trust to this computer" popup would come on my phone if I had unlocked it. None of this is happening now. I did the following to try to remedy:

  (1) power cord iPhone replaced (it was time for a new anyway)

  (2) uninstalled and reinstalled iTunes

  (3) restart computer and phone probably 29856 times

  (4) device Manager... nothing comes up at all, not even the unknown device. RARELY the unknown device comes up, then I get a "Code 10: this device cannot start" error, but it is * in a handbasket just trying to get to THIS point! and IF I do what they say to do to correct a code 10 (uninstall all USB and restart the computer, then USB devices hook to the top one at a time), so I'm now at my problem of a communication that don't meet pluse between my phone and PC

  5) tried to the registry editor, but not "upper filters" option rises

  (6) virtually every other option on this thread of 5 pages iphone not recognized by Windows 7

  Help, please?

  The USB port of your laptop does not provide sufficient power to recharge the phone. It is a hardware problem with your laptop, not the phone.

• HP Photosmart B110: cannot install drivers, USB error message

  Hello! I'm stuck installing the software/drivers for my printer.

  I bought a new computer and everything worked fine until I tried to install the printer. I get this error message, and I can't move, so I can't use the printer

  This is a screenshot of the Setup error:

  

  It's strange and I don't think it's really a problem of USB, I have many more devices connected via USB and printer is the only one that gives problems. I also tried to plug it into all possible USB of my motherboard without result.

  I also downloaded the drivers up-to-date for my motherboard, I've even updated the BIOS to the latest version, without result.

  I can see the printer detected from the control panel of configuration/printers, but he said to the drivers installed.

  I'm out of ideas... I don't know what to do, please help >. <!

  Thank you!!

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.
  
  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
  
  Now follow the installation and check for the difference.
  
  Kind regards
  Shlomi

• SSD external via USB does not start by default

  Hello Apple community.

  I have a problem with my new external SSD. Given that the base model Mac Mini end of 2014 comes with a disk HARD 5400 RPM drive, I wanted to go to an SSD without having to tear the whole unit. I wanted to exhaust the option 'boot from USB' and I'm having a strange problem. I cloned my Mac to the new drive SSD and slapped in a box set of the speaker. I connected via USB and changed my 'startup disk' to use the external SSD drive. However, it does not start on this unit automatically. When I reboot and discovers the "boot manager" I see the USB being initialized automatically. After disconnection / re - plug the drive in, it appears as a boot option. Once it is initialized, everything works fine and I can boot into El Capitan without any problem using the SSD.

  I am trying to find a way that I can get the Mac to initialize the SSD to the boot upward and choose default. I don't want to have to re - connect the drive whenever I want to start on the SSD drive... Any help and suggestions are greatly appreciated!

  My equipment

  ===========================

  Model Base of Mac Mini (end of 2014)

  1.4 GHz Intel Core i5

  4 GB of DDR3 1600 Mhz

  OS X - El Capitan v 10.11.3

  240 GB SanDisk SSD more - connected via USB3.0

  What unit do you use for the SSD?

  Can you provide a link?

  If the SSD is delivered with a box to provide a link to that,

  How do clone you for the SSD? What app did you use?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable, reinstall the OSX. Nothing shall be lost

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x