Install VMtools to VM with 2000 server

Similar Questions

• Cannot install agent converter on Windows 2000 server

  I was unable to install the converter on a Windows 2000 Server agent.  Initially, I tried remote and encountered a 1603 error which I think is a generic windows installer error.

  So I moved the VMware converter-all-4.3.0 - 292238.exe for the Server Windows 2000 itself and ran the exe there hoping to install the agent.  However, when you run the exe file that I meet "VMWare vCenter Converter Standalone requires Windows XP or later."

  Windows 2000 Service pack 4.

  1.2 GB free on the C: drive, 25 GB free on D:

  From the local administrator account

  Have deleted the domain server (it is now in its own working group)

  Have applied the latest updates from Ms.

  Restarted.

  Same mistake.

  Would appreciate any suggestions.

  Install the Converter 4.0.1. Your Version (4.3) does not support Windows 2000 more.

  http://downloads.VMware.com/d/info/datacenter_downloads/vmware_vcenter_converter_standalone/4_0

  Click on "View history" to see the 4.0.1 version.

  Concerning

• Just install JDeveloper 12 c with webLogic server

  Hello friends,

  I am new to Oracle ADF. I have just installed Oracle JDeveloper and observed that WebLogic Server-12 c got also installed.

  I'm learning Oracle ADF to develop a web application independent.

  Can someone help me understand the following:

  (1) is it mandatory to use for Oracle ADF WebLogic Server

  (2) when we compile and run our program developed in the JDeveloper environment, he deployed on weblogic Server (which got installed)?

  (3) we configure the weblogic Server development in JDeveloper before?

  Thanks and greetings

  Hawker

  (1) Weblogic is the application most commonly used server. However, you can use glassfish as well - http://www.oracle.com/technetwork/developer-tools/jdev/documentation/1212-cert-1964670.html#Abrams-SupportInformation-ApplicationServers

  (2) you must deploy on the weblogic Server (this is the integrated weblogic server that has installed). You can run your jspx page or deploy the profile of the EAR.

  http://docs.Oracle.com/middleware/1212/ADF/ADFAG/deploy.htm

  (3) you must create a data source that points to the databases you use. Other than for a standard ADF application running on Weblogic Server integrated, there are not much he must use configurations. However, when deploying in production environments, you need to make sure, you install and configure the environment to weblogic for performance and scalability. The link above should have a few details.

  Nassima

  http://ptotech.blogspot.com

• VCB with Windows 2000 Server before and after! Does not!

  In our configuration (esx3.5, vi2.5 and vcb 1.5) we have problems get the pre post scripts running in Windows 2000 Server. It does not at all pre/start scripts. We need this because we have some strange databases that must be stopped before the snapshot and started after.

  The 2000 machine is fully updated, and the esx servers are updated 4.

  I also tried in a test environment with esx3i fully updated (beyond update 4) and vcb1.1

  Pre-Post controls work perfectly in 2003 (not yet tested in 2008).

  What I tried:

  • Disable-ing the SyncDriver (must be a solution for Server 2000 with Exchange 2000)

  • Place scripts to a location different (C:\WINNT or C:\Windows or C:\Program VMware Tools\backupScripts.d

  • Adding C:\Program VMware Tools\backupScripts.d to the $PATH variable so that the script can be run from anywhere

  • Reinstall the VMWare tools.

  The command I used to get the backup:

  v h vcbMounter.exe *. n u .local \n*-ipaddr:vcbtest. .local - r c:\vcb\vcbtest-full-01 t m nbd fullvm

  I also tried adding the switch "0 q" or "q 1".

  No solutions seem to work. Does anyone have any ideas?

  Greetinx Atze

  It works for me with a C:\Windows folder (even if windows is installed in C:\winnt),

  with files like pre-antigel - script.bat and post-thaw - script.bat

• I can't install Windows 2000 server tools

  My windows 2000 server is the Japanese version, and I do not know exact messages in English.

  I dare say "the procedure entry point HeapSetInfomation can not find the KERNEL32.dll file."

  Hello

  you have installed Microsoft Update cumulative1 for SP4?

• Installing vCenter 4.0u2 with the remote server in SQL2008

  I've been running vCenter 4.0 for awhile with SQL Express on the same machine.  I installed SQL Server 2008 on a remote computer, detached and attached the SQL Express database to that server.

  I've implemented the SQL 2008 database with a SQL rather than a domain account authentication account because our domain accounts will expire every 90 days and I have no control over making an exception to this policy.

  I have tried everything point vCenter 4.0 to the new database using the instructions in the knowledge base, but it has always failed.  So I just uninstalled (who also failed and I had to manually get the rest but this is not the point of this post).  When I go to install vCenter 4.0u2 with SYSTEM defined as the user vCenter (again because of limitations of domain account and expire 90 days), it gets all the way up to the

  "

  25003.Setup failed to create the vCenter repository"

  and then breaks down.  It's probably something with the user accounts on SQL authentication and vCenter Server does not, but how can I work around this? If I do a local account on the vCenter server with the same name and password on the vCenter server and run it like this account which will solve the problem?

  Check here also, not exactly the question, but it can help to point you in the right direction.

  http://KB.VMware.com/kb/1017596

• Installation of VMware workstation in a machine with vmware server 2.0 is already installed?

  is it possible to install the latest version of vmware workstation (I guess that's 6.5) in a machine where vmware server 2.0 is already installed? where possible there at - it something I should know before installing vmware workstation (eg. problems known, network suspends etc.)? in particual I am a little concerned network mangement (eg. both vmware server and vmware workstation in fact add virtaul adapters: is a possible trouble caouse?). The host of the virtual machine is vista ultimate x 64 with 8gig of ram and a quad core cpu.

  I did a little research, and from what I understand, this was not possible with vmware server 1.0 x.. as the situation has changed with vmware server 2.0?

  (in case you are wondering why I sholud be willing to do):

  I worked with vm ware Server 2.0 for about a year, but now I miss some of the features that are only present in vmware workstation: multiple snapshot and clone VM vm ware server... However is much more flexible when you don't have physical access to your VM host... so I was wondering if it is possible to get the best of both worlds : I would like to use vm ware workstation allows you to configure virtual machines and manage snapshots and vmware server to remotely manage virtual machines, I've created with workstation. Is it not possible?

  Thanks in advance for your attention

  We discussed some time ago

  See this post for the results

  http://communities.VMware.com/message/1309546#1309546

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• More older PowerEdge 2650 has been accepted, in the search of Windows 2000 Server to install.

  Hello and thank you for reading this note.  First time poster here. Please excuse the bad post...

  I was given a Dell PowerEdge 2650 (dual Xeon), which has been deleted.  There is a license sticker on top for Windows 2000 Server..., but this product is no longer available from Dell.  Technical support proposed contacting Microsoft about the availability of an installation CD.

  I've been wandering the Microsoft site to research to find out where to contact (e-mail, phone, Mail US?) about this... and turn to this group for assistance.

  Who should I contact?

  Your time is appreciated.

  Hello

  You can take a look at the link below. Product support you requested is completed. If you want a copy of the OS, I suggest to do a search on your browser to get a copy
   
  http://support.Microsoft.com/GP/lifeselect

• RVL200 and Windows 2000 Server - can not access network resources via VPN

  I am new to the VPN, and I feel I'm missing something very basic in my configuration. I just installed a RVL200 as the gateway for my corporate network router.  The network includes a Windows 2000 Server that acts as server DHCP and several PC and a printer.  I was able to "establish a SSL VPN tunnel" home connection to the router, but after recording in everything I see is the screen of virtual Passage - one with lock icons - otherwise I am inside the router.  The statement shows that I am connected.  Once the tunnel is established, what am I supposed to do to get computers to the computers on my network?  I can ping all computers on the network using their LAN address.  I'm supposed to see a choice of network resources to get to this point?  I put the router as a trusted site in the server and even tried to disable all firewalls, but I see that the VPN screen with icons.  I don't know how to proceed from here because I don't know what I'm supposed to see.  Thanks for any help that you can give to a newbie!

  The SSL connection is only for the VPN router. To access the computer, you can use Windows Remote Desktop connection. So that you can access to remote computers on the network, or you could look for 3 third-party software for remote access

  Hope this helps

• Converter for 2000 server driver

  I have problems using the converter to convert 2000 Server (physical box) to VM on Center v. It converts the actially, but when you start the virtual machine, it fails with 'Inaccessible boot device '. I thought it was due to the fact that converter does not support RAID controllers but this server for IDE hard drive.

  Then, I found the article that says:

  "On the source system that runs under Windows 2000, you must install the special driever and reboot the system.

  The funny thing is that I don't seem to be able to find this driver... someone can point me to the right direction?

  Thank you.

  Elijah.

  ESX does not support IDE drives, so you must choose explicitly Buslogic during the Coverter Wizard or you can perform the following tasks after the fact:

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1002149&sliceId=2&docTypeID=DT_KB_1_1&dialogID=45970457&StateID=0%200%2045856080

  -MattG

  If you find this information useful, please give points to "correct" or "useful".

• Installation of ODI with SQL Server 2005

  Hello
  I try to install ODI with MS Sql Server 2005.
  I created a database in Sql Server and created a user with rights to connect to the database db_owner.
  
  While trying to install master repository, I selected Sql Server with the following details
  Driver: com.microsoft.jdbc.sqlserver.SQLServerDriver
  URL: jdbc:microsoft:sqlserver: / / < myhostname >: 1433; SelectMethod = cursor
  
  The repository not created in error:
  * com.sunopsis.core.q: java.sql.SQLException: [Microsoft] [SQLServer 2000 for JDBC driver] [SQL Server] the new tabular data stream (TDS) procedure remote call (RPC) protocol stream is incorrect. Parameter 1 (""): data type 0 x 38 is unknown *.
  
  Now, if I change the URL to jdbc:microsoft:sqlserver: / / < myhostname >: 1433, the repository is created successfully. But when you log in Repository Manager to the topology using the same basic shape, again invites me the same error.
  
  Has anyone faced the same problem?

  Hello

  You are using SQL server 2005 but try to connect by using SQL server connection details 2000 you should use

  com.microsoft.sqlserver.jdbc.SQLServerDriver

  JDBC:SQLServer://servername:1433; databaseName = DBNAME; SelectMethod = cursor

  You must also make sure that you use the correct driver SQL server 2005, if you use a version of Java before 1.5 to ODI so you will need the JDBC SQL Server 2005 1.2 driver.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Participate in a network Windows with Samba server

  If anyone can help with this? I have installed Samba server - do I need to install anything else?

  This is according to the functions you need on the server and I n know what you need because you didn t this post.

  In your case I a bit with Google search. In the internet, you can find a lot of description, how to create a network with a server Samba and Windows and Linux clients.

• ProLiant DL320e with Windows Server 2012 Bluescreen

  Hello

  I installed Windows Server R2 with smart supply a Proliant DL320e Server 2012 R2 and it bluescreens much. The blue screen message is a pretty no description "KERNEL_SECURITY_CHECK_FAILURE".

  I installed a second Proliant DL320e server and it shows the same behavior, so I conclude that this isn't a defective hardware.
  
  I found some knowledge which mentions screens blue and with the driver for Smart Array
  http://h20628.www2.HP.com/km-ext/content-webapp/document?docid=emr_na-c03793656 & DTD = default & local = d...
  But the update and version numbers do not match.

  Drivers, software and firmware for the HP DL320e Gen8 ProLinat Server Page did not all downloads for my OS-, but it displays a warning that it is experiencing problems.

  I tried to fill in the HP Support Assistant, but I got an email in response, telling me that they are currently unable to help with e-Mail support.

  The servers are offline on a clients site in a restricted environment so that they lack updates online.
  
  During this time, I downloaded the SPP Service Pack for Windows Server
  FTP://FTP.HP.com/pub/softlib2/software1/CD-generic/p652182553/v84427/SPPMDSLWIN2013090.2013_0830.7.i... and today, I'll try if it corrects the blue screens.
  
  Does anyone have pointers?

  Take care

  Martin

  Thank you, I have not found this forum. If an admin could move it which would be best.

  Just in case anyone else has this problem is this question:

  I contacted HP by telephone support and the solution is:

  Do not use smart supply when you configure your server, it is not supported and it will be randomly bluescreen with Windows Server R2 2012. You must install windows directly, so take your storage driver and copy it to a usb key and load the driver during the installation of windows. In my case I needed to use the mass storage drivers for Windows Server 2008 R2 from http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5293151 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253DMTX_9b5424c852a54e49b501e280e5%257CswEnvOID%253D4064%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Take care

  Martin

• Problem with update server 2012 license window

  Hello

  We installed the evaluation version of Windows server Standard Edition 2012 around a few months back.

  Now, we have activated the Action Pack so was trying to update the license details.

  But we receive the error that the license key is not valid, and at the same time, our server stops after every one hour.

  Quick response will be really appreciated.

  Have you tried activate with the generic key? You activated action pack, it should work with volume licensing.

  Refer to this link https://technet.microsoft.com/en-us/library/jj612867.aspx

• How to install the ssl certificate in windows server 2008?

  Hello

  Can someone give me the steps to install the SSL certificate on my application hosted on windows server 2008 R2?

  Hello

  Although technet.microsoft.com should be the best forum for the problems of server below is a guide on how to install an SSL certificate.

  It will be useful.

  To install your newly acquired in IIS 7 SSL certificate, first copy the file somewhere on the server and then follow these instructions:

  1. Click on the start menu, go to administrativetools and click on Manager of Services Internet (IIS).
  2. Click the server name in the links on the left column. Double-click server certificates.

     

  3. In the Actions column to the right, click Complète Certificate Request...

     

  4. Click on the button with the three points, and then select the server certificate that you received from the certificate authority. If the certificate does not have a .cer file extension, select this option to display all types. Enter a friendly name that you can keep track of certificate on this server. Click OK.

     

  5. If successful, you will see your newly installed in the list certificate. If you receive an error indicating that the request or the private key is not found, make sure that you use the correct certificate and you install it on the same server that you generated the CSR on. If you are sure these two things, you just create a new certificate and reissue or replace the certificate. If you have problems with this, contact your certification authority.

     

  Bind the certificate to a Web site

  1. In the column of links on the left, expand the sites folder, and click the Web site that you want to bind the certificate to click links... in the right column.

     

  2. Click the Add... button.

     

  3. Change the Type to https , and then select the SSL certificate that you just installed. Click OK.

     

  4. You will now see the listed link for port 443. Click close.

     

  Install all the intermediate certificates

  Most of the SSL providers issue certificates of server out of an intermediate certificate so you will need to install the intermediate certificate on the server as well or your visitors will receive a certificate error not approved. You can install each intermediate certificate (sometimes there are more than one) by following these instructions:

  1. Download the intermediate certificate in a folder on the server.
  2. Double-click the certificate to open the certificate information.
  3. At the bottom of the general tab, click the install Certificate button to start the Certificate Import Wizard. Click Next.

     

  4. Select place all certificates in the following store , and then click Browse.

     

  5. Select the Show physical stores checkbox, then expand the Intermediate certificate authorities folder, select the below folder on the Local computer . Click OK. Click Next, and then click Finish to complete the installation of the intermediate certificate.

     

  You may need to restart IIS so that it starts the new certificate to give. You can verify that the certificate is installed correctly by visiting the site in your web browser using https rather than http.

  Links

  • Move or copy an SSL certificate on a Windows Server to another Windows Server
  • How to disable SSL 2.0 in IIS 7
  • How to configure the SSL in IIS 7.0
  • Video tutorials to install an SSL certificate in IIS 7 to NetoMeter

  Kind regards

  Joel