Install zoo tycoon2 in another folder?

Similar Questions

• How to install some aplication CC in another folder the files to c:/pogram /?

  How to install some aplication CC in another folder the files to c:/pogram /?

  I have small SSD.

  Hello

  You can change the installation location through the desktop Adobe CC application.

  Click the gear on the top icon right > select Preferences > section under the creative cloud, you can set the installation location.

  Kind regards

  Sheena

• Zoo tycoon2 does not not on Vista?

  I have a new hp laptop with Vista (Home premium) 64 bit OS. I have also 4G RAM.
  Zoo Tycoon2 fails to install - it gets 75% full and then fails to write
  c:\Program Files (x 86) \Microsoft Games\Zoo Tycoon2\sounds\crd_lps.wav

  Installation failure and express installation on the same file.
  I would be very happy for any help or advice.

  Thank you very much
  Kiera

  Kiera,
  Can you give us the error message right that you receive during the installation fails?  To help diagnose the problem.  One thing to try is to execute the installation or the installation file as an administrator by right-clicking the file and selecting 'run as administrator '.  Please post back with the details of the error you receive so that we can better help you.

  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How copy/paste or copy/move a file to another folder in Windows XP

  I need to copy/paste or copy/move the files from one folder to program existing to another folder.

  Use the movement commands to copy do?

  Hi Jimmyjack1941,

  I suggest you to read the following articles for more information.

  These are the items if you use the Windows Explorer to perform operations:

  To copy a file or folder

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/windows_fcab_copy_file.mspx?mfr=true

  To move a file or folder

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/windows_fcab_move_files.mspx?mfr=true

  You can follow these commands to move and rename the file or folder using the command prompt:

  Moves files and renames files and directories.

  To move one or more files:
  MOVE [/Y | /-Y] [drive:] [path] file1 [,...] destination

  To rename a directory:
  MOVE [/Y | /-Y] [drive:] [path] dirname1 repert2

  [drive:] [path] file1	Specifies the location and name of the file or files you want to move.
  destination	Specifies the new location of the file. Destination can consist of a drive letter and colon, a directory name, or a combination. If you move a single file, you can also include a file name if you want to rename the file when you move it.
  [drive:] [path] dirname1	Specifies the directory you want to rename.
  repert2	Specifies the new name of the directory.
  /Y	Deletes the request for confirmation that you want to replace an existing destination file.
  Y	Causes of request for confirmation that you want to replace an existing destination file.

  The switch /Y may be present in the COPYCMD environment variable. This can be derived with / y on the command line. Default value is quick to replace unless is running of command MOVE within a command script.

  Example:

  move c:\windows\temp\*.* c:\temp

  Move the temporary directory c:\windows\temp files in the root, this is of course assuming you have the windows\temp folder.

  Note: Microsoft does not move the files/folders installed application.

  Hope this information helps.

• Can we create backup files to another folder with timestamp of a file in another folder?

  Original title: automate the process to create backup files.

  Can we create backup files to another folder with timestamp of a file in a different folder.
  My goal is: when I dump/copy the files in the folder 1, saving the same file must be created in the folder with timestamp 2.
  This will apply even if I change the file existing on the record 1 (i.e. If I change an exixting file in folder 1, this change should reflect by creating a new file with timstamp)

  Hi Dhawal02,

  This option is no longer available in Windows XP.

  You can use your favorite search engine and download & install any third party software that can serve the purpose.

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  Hope the helps of information.

• Files & documents within a folder is moved to another folder

  We have files within a folder on a drive L: some files missing from the inside of the folder and find themselves in a different folder on the same drive.  How can I eliminate the possibility that someone is clicking and dragging files inadvertently in another folder?

  Hello Rbitty68,

  Welcome to the Microsoft Answers Community!

  The best solution to prevent the fall and drag accidental is to change the number of pixels in the file should be moved to activate slide / move. You can do this by downloading Tweak UI provided by Microsoft to change this and many other parameters.

  Download Tweak UI

  Once you have downloaded/installed Tweak UI:

  ·         Click Start

  ·         Click on all programs

  ·         Click Powertoys for Windows XP

  ·         Click Tweak UI

  ·         Click the mouse

  ·         Under the mouse sensitivity, Drag:, enter a higher number as currently defined. (for example: 99)

  Now the file will be dragged significantly until the file is actually moved anywhere

  Hope that helps, I look forward to hearing from you.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I'm unable to copy and paste a file into another folder or drive.

  * Original title: malfunction of the system

  When I copy a file to paste it in another folder or drive, it does not work. I don't know whether it is a malfunction of the system or virus?

  Hello

  I would like to know more information about the issue. Please, answer the following questions to help you best.

  1. You get the error message?
  2. The question is limited to a specific file?
  3. What anti-virus software is installed on the computer?
  4. Were there recent changes made on the computer before the show?

  To ensure that your computer is virus-free and spyware, run a scan online using the link below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  You can also check out the link and check if it helps.

  http://support.Microsoft.com/kb/2623670/en-us

  Please get back to us with the above information help you further.

• move a VMDK (!) data to another folder store

  Hello

  I have a question:

  Recently, we have improved a number of virtual servers in Windows 2003 to 2012. In fact, in each case we installed a new virtual machine, detached the data of the old 2003 VM disks and tie then the new virtual machine to 2012. Of course, this way the VMDK file remains in the folder of the old virtual machine. When I then deletes the old VM, a new has his record with his normal config files and the VMDK where the OS is installed and THAT VMDK data remains in the folder of the old virtual machine which is empty otherwise.

  To a suitable opportunity (restart Windows updates) I would like to stop the new virtual machine and physically move data VMDK private new virtual machine folder, and then restart.

  Unfortunately, when I do it with the browser of the vSphere client data store, it acuatlly copy the VMDK to the new folder and then removes it from the old folder.

  Since this is a large amount of data (several hundred GB), I would avoid it, of course.

  I have not found a really _moving_ "GUI" method a VMDK from one folder to another folder in the data store even without copying.

  I can't SSH in an ESXi host that has access to the data store, and then use 'mv' at the shell level. This seemed to work very well with a few small trials VM (s).

  But is it safe to do this way? Is there another way (official)?

  Thanks for sharing your insight or opinions!

  Kai - Uwe

  Hello

  The vmkfstools command is a command to run at the server command line, no windows.

  as:

  vmkfstools EI /vmfs/volumes/datastore1/foo/test.vmdk /vmfs/volumes/datastore1/bar/test.vmdk

  Wuestenfuchs wrote:

  It is strongly recommended to use the mv command because it is not supported and does not as expected. It may seem actually to work, but there is no guarantee.

  It always seems that I have no other choice. Unfortunately, your warning - in this form of wave, no documentation citing or even a technote - is useless, too. Could you please develop, WHY do you not?

  My warning is inaccurate because a quick google does not give me a precise point in the documentation.

  Here's an oldie on that thread: Re: renaming of files VMDK

  I do however am 100% sure that the mv command is not supposed to be used to move the virtual disks.

  There are several reasons:

  The vmkfstools command was specially written to create/copy/clone/rename virtual disks. This command takes the hosts management resources into account. Also will write that the blocks are written more optimally. It is also the command which is fully aware of the mechanisms such as thin and sparse disks.

  It is also the only command that VMware will support if you end up getting in trouble.

• Integrated application to another folder to / applications

  Communities of expensive support Apple,

  Will be integrated macOS mobile applications Sierra - such as: FaceTime, book fonts, Siri, etc. - in the/applications folder to another folder (example: / Applications/folder) have a negative impact on the computer running Mac OS Sierra 10.12?

  Kind regards

  JanRyt

  I'm not sure it's possible, but the greatest effect, it's that they never updated if they should be. They also do not work properly.

  Other applications that can depend on them wouldn't work, either. I don't know what could be affected, or not at all.

• How to make El Capitan to recognize my Canon printer I've done what I think is everything: one clean install of El Capitan (another problem); Reinstall the software from the CD; Anon same impression reset. No luck at all.

  How do El Capitan to recognize my Canon printer? I did what I think, that's all I can: clean install of El Capitan (another problem); Reinstall the software of Canon from the CD; same impression reset - my printer shows not yet up! I tried LAN and USB.  No luck at all. The printer does not yet appear upward on the tree of USB in the reporting system.

  What printer model Canon...?

  kologano wrote:

  The printer does not yet appear upward on the tree of USB in the reporting system.

  This looks more like a bad USB cable or bad printer.

• Thunderbird accounts disappeared after having copied the .thunderbird folder in another folder for backup (always went after the removal of duplicates)

  Hello

  I copied the .thunderbird folder to another folder on my computer (Ubuntu on Dell Laptop) for back up, re-open Thunderbird: accounts all parties; asking me to set up an e-mail account. I deleted the duplicate folder, but Auditors have always disappeared when I restart (.thunderbird original file still in the original location).

  I tried to use the profile to find/reactivate Manager profile as suggested on the support page (creating a profile with my name instead of the random.default profile) online - but it did not work.

  I'm reasonably computer literate but not a developer/programmer normal language would be appreciated!

  Thank you.
  Adrian

  It me - confused things fixed which happened, but fortunately I have lay profile .default right in the end!

• Accounts missing after copying (and then remove the copy of the) folder .thunderbird to another folder for backup (remains of original file)

  I copied the folder .thunderbird to another folder on my computer (Ubuntu on Dell Laptop) for backup, when I re-opened Thunderbird my accounts appear missing and it asks if I want to configure e-mail, etc. Then I deleted the file in double .thuderbird, hoping that this would fix it. On opening of Thunderbird, it is always as if it were a new installation - .thunderbird folder and files kept at the original location

  I am hoping there is a simple solution.

  Any ideas? - and yes I looked at a lot of books online!

  It me - confused things fixed which happened, but fortunately I have lay profile .default right in the end!

• Detcts iPod but ITunes "cannot correctly identify" uninstalled iTunes and then re-installed. Restarted laptop. Folder deleted Apple Lockdown, rebooted, still could not "identify correctly.

  ITunes detects the iPod, but 'cannot correctly identify' uninstalled iTunes and then re-installed. Restarted laptop. Folder deleted Apple Lockdown, rebooted, still could not "identify" during each step, also disconnected iPod USB port.

  Try the following (in that order).  Looks like you're using Windows (not a Mac), so I'll make this assumption...

  Shut down (power off) the computer, disconnect all the USB devices.  Plug the laptop power adapter, so that it does not work on battery power.  Do this Reset (reboot), the iPod

  Learn how to reset your iPod - Apple Support

  Start computer, run iTunes and connect the iPod to a USB direct on the laptop by itself.  If there is no difference, put the iPod in Disk Mode

  Put the iPod in disk - Apple Support Mode

  Then connect to the laptop again, always by himself.  If iTunes picks it up, he may ask you to do a restore with a message on the "recovery."  If you're OK with deletion of the iPod, do the restore.  See if the iPod is "correctly identified" after restoration.

  If the problem persists, you said you uninstalled and reinstalled iTunes, but may not have uninstalled iTunes and associated software components.  Follow the steps in this document to uninstall an iTunes installation components, in the order described all listed

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Then, reinstall the latest version of iTunes

  http://www.Apple.com/iTunes/

• Satellite L350-277 - can I install driver touchpad of another model?

  I just changed from a Satellite M70 and the touchpad performance is far superior. Is it possible to install the driver for the touchpad on the L350 M70? Anyone see any problem?

  The Satellite L350 pilot leaves the pointer jumps all over the screen. Before say you 'change settings' - I - for about an hour.
  The Satellite M70 driver has much more stability and more features - like every corner can have a function - copy / paste for example.

  Every technophobe in the Toshiba got ideas, before I screw to the top of the main interface on my new L350.

  Hello

  I can t imagine that jumping is caused due to the driver. Make sure that you do not touch the touchpad if you type something. Alternative, you can disable the touchpad due in writing if you press FN + F9.
  Check this box!

  And before you install a driver from another laptop you need to test the latest driver for your laptop. Please first check from Toshiba Web site for an update of the L350 driver:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  By the way: what OS is installed at present? Do you use a preinstalled OS from Toshiba?

• NTLDR is missing - when you try to install Windows 7 on another hard drive

  I have a PC Compaq Presario SR2027X a/w Win XP Media Center Edition SP3 installed.  I downloaded and installed the Microsoft Windows 7 Upgrade Advisor to determine if WIN 7 would go on my system.  The airport of Win 7 Upgrade Advisor said that I could install Win 7.  I bought Win 7 32 bit and 2-1 GB PC5300 memory sticks.  I first installed the memory and booted up the system.  Everything worked well.  BIOS has seen the new memory and I have not encountered any error.

  I then turning the system off and removed the HDD (120 GB Sata).  I installed another hard drive (160 GB Sata) which had been restructured and ready to use.  The BIOS detects the hard drive and the BIOS has been changed for a start of the OPTICAL drive.  I then placed the WIN 7 32-bit software disk in the OPTICAL drive and saved the changes in BIOS and rebooted the system.  I was expecting to see the normal WIN 7 screens during the installation.  Instead, I got "NTLDR is missing, press CTRL + ALT + DEL to restart".

  Then I tried pressing ESC during boot to enter the boot menu.  Once in the boot menu, I select the optical drive and now I get the message "DISK BOOT FAILURE, INSERT SYSTEM DISK AND press ENTER".  I opened and close the optical drive optical drive light lights up, and I then press on enter.  I get the same message on "DISK BOOT FAILURE,...» ».

  I built more than 40 PC and have never had this problem.  Is there something unique about Compaq/HP PC's that prevents me to install WIN 7 on another hard drive that is not the original hard drive came with this pc?

  HP / Compaq computers are no different from any other computer on the market. You can install Windows XP, Vista, 7 or 8 on almost all made within the last 7 years.

  I think that your problem is due to a failure of CD/DVD drive or disk installation of Windows 7 corrupt or unbootable. Please check that the CD/DVD drive is fully functional and functional as should be. Also, check that your Windows 7 disc is free of errors and that it is bootable. If necessary, you can download a Windows 7 SP1 ISO from HERE and HERE and also download Windows 7 USB/DVD Download tool.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation