Installation hangs at 70%

Similar Questions

• XP SP3 installation hangs

  The installation hangs when the 'execution process after installation' I removed and tried it 4 times the same thing happens every time and SP3 is necessary to use TurboTax2011.  It is a single computer currently running XP Media Center Edition 2002.  Help, please!

  Hello

  ·         You get the error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  For reference:

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• OfficeJet J4550: Could not load the driver for the WIN10 - installation hangs

  Updated my Dell XPS to WIN10. I tried to upgrade the driver for my J4550 but installation hangs at the beginning of the installation process, "control systems".  When I tried the download, the old files from HP devices detected HP program and deleted. Now my computer does not even recognize the OfficeJet when you plug into the USB port.

  Need help why computer does not recognize the printer no matter what I do and how to get the computer to download the driver.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, run the following tool:
  FTP://ftp.HP.com/pub/Printers/datfileremover/installdatfileclean.exe
  Then, run the Setup file and check all difference

  Kind regards
  Shlomi

• VMware 5.5.1 installation hangs at the end in XP Pro Sp3

  Then the installation hangs and won't be finished install but progress bar is just at the end have waited over an hour for her to finish - by using the administrator account.

  A folder for it but I don't see in the start menu.

  You know not so completely installed or missing components.  Nothing in Add/Remove programs related to it, so I think not completely installed.

  How to install XP or is there another version number which can do a physical examination to the conversion of the virtual machine of multiple partitions (drive by keeping letters) to a conversion of an existing for a guest of computer virtual of XP Sp3 XP run on Windows host 8.1 - hyper-v or vmware player prob / virtual box?

  Thank you very much.

  Also these: cmd prompt: netsh int ip reset resetlog.txt
  then netsh winsock reset catalog.
  Then reinstalled the NIC drivers as suggested.
  Also put the installer program office (extract the Installer file) and which ran on reboot.
  FIXED - after that restart could install all services installed in the end and shortened came office - running he opened the program.

• Standard of 6 CS installation hangs up on 'Close these applications.' Safari is closed. Now what?

  CS 6 Standard installation hangs at "close these applications: Notifications Safari.» Safari is closed, I do not see Active notifications. Someone knows what to do?

  Guest of installation of close SafariNotificati

  https://helpx.Adobe.com/Acrobat/KB/install-prompt-close-safarinotificati.html

• Adobe Flash Player installation hangs at 25%

  I did a clean uninstall of Flash Player - no use-installation hangs at 25%.

  using Mac OX X worm. 10.10.2

  IT FIXED!  ... by following these instructions:

  How to do a 'clean' Flash Player installation in Mac OS X

• Download flash Installer hangs at 30% then fails every time

  Hello, I'm running a MBP 2012 retina.  I download the latest version, but the Installer did pause for one minute in download (at the 30% mark) and then fails.  "The connection has failed.  Unable to complete the installation.

  I tried the rest of the solution in this thread:

  Flash Player installer hangs at 95%

  But I do not see the .pkg file in the downloaded .app file.  I'm not under antivirus and I restarted.  I used uninstall as well.  I use Safari.

  Any suggestions?

  Thank you

  Chris

  Managed to solve myself (see this thread: How to perform a "clean" Flash Player install in Mac OS X)

  Thanks for all the replies so

• The installation hangs at 25%

  I just purchaesed Dreamweaver CS6 student & Teacher Edition. The installation hangs at 25%. I tried uninstalling and reinstalling, boot without failure, as an administrator and even clean the registry with Ccleaner. Same result EVERY time. I have other products installed (CS5 Design Premium) and am running Windows 7 Ultimate x 64. Any Suggestons?

  I just killed the AdobeHelp.exe and finished

  -Dan

• BI installation hangs on step 5 - Administrator Details

  Hello
  
  I downloaded Oracle Business Intelligence, v. 11.1.1.3.0 and try to install it.
  
  But the installer hangs on the details page administrator - step 5, after checking the settings of all other systems are very good!
  
  I checked several times that I have enter valid administrator username and password.
  
  What could be the problem and how can I get in this step, please?

  LeonMatch,

  You will need to install the loopback adapter to fix this password error during the installation of 11 g. Its a sine qua non for OBIEE 11 g to call the IP of the host file. It is defined in this way, you can go through the documentation for it.

  Instructions to install rear loop:

  To manually install Microsoft Loopback card in Windows XP, follow these steps:
  1. click on start and then click Control Panel.
  2. If you are in Classic view, click on switch to the display of the categories under control panel in the left pane.
  3. double-click on printers and other devices, and then click Next.
  4. under See also, in the left pane, click Add Hardware, and then click Next.
  5. click on Yes, I have already connected the hardware, and then click Next.
  6. at the bottom of the list, click Add a new hardware device, and then click Next.
  7. click on install the hardware that I manually select from the list and then click Next.
  8. click on network adapters, and then click Next.
  9. in the manufacturer box, click Microsoft.
  10. in the network adapter box, click the Microsoft Loopback adapter, and then click Next.
  11. click on finish.

  After that, go to the network configuration and look for the back loop network adapter and configure it with a static IP address, such as (192.168.1.1) as follows:

  After the step above, if the box has lost the network connection to the rest of the real network. Then go back and re - configure the network adapter physical in the way it was (for example, DHCP). Because of the feedback loop, the LISTENER. ORA should be updated to reflect the new static IP address assigned above as part of the configuration of loop back.

  Kind regards
  -Laurence.

• Flash Builder 4: Installation hangs

  Hello

  just download Flash Builder 4 and try to install, but the installation hangs on display "install...". ». What are the causes of the problem?

  I use Windows XP SP3.

  Where did did you extract your Installer to? There is a known bug where a subcomponent hangs during installation on windows, when the path contains a space https://bugs.adobe.com/jira/browse/FB-26442leader.

  Jason San Jose

  Software engineer, Flash Builder

• The DirectX Web Installer hangs during installation of the components

  I try to get several games running, but am stuck by the demands to DirectX 9 c. My machine is Windows 7, so it's DX11 installed. I went here to download the web installer:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2da43d38-DB71-4C1B-bc6a-9b6652cd92a3&displaylang=en

  When I run the installer, it downloads the components, then hangs on "Installation of components. It displays the message "copying files...". "and the 1.0.2910.0/Microsoft.DirectX.Direct3DX.xml

  One of my CPU is maxed out running dxwsetup.exe * 32 and this for hours. My computer is a Dell with Windows 7 64 bit.

  Are there instructions anywhere to update DirectX to hand?

  Thanks for any help.

  Steve, thanks for your suggestion. Running at startup using the minimum does not solve the problem, but it got me thinking in the right direction.

  I finally put in the Win7 disc and 'fix '. It is really a re - install, but the programs and data are stored.
  It took a few hours to go through the installation, but after that, I ran the DirectX Web Installer smoothly. Played some BioShock 2 last night!
  Thank you

• Visual Express 2010 installation hangs

  Original title: I am downloading and installation of visual basic express, he hangs up on installation, I tried first save it then install, but it always crashes upward

  I am downloading and install visual basic exprss, he hangs up on installation of .NET framework install, I tried registering first and then install but it always hangs up he

  Hi daniel frances mccarthy III,.

  -What is the error message that you receive when installation stops?

  Here is a post that might be useful to solve the problem.

  Frequently asked Questions (FAQ), with answers

  If this is not enough, post your request in the forums installation and registration of the Visual Studio Express editions to better support on this issue.

• Vista installation hangs on the end of the installation during clean installation

  Hello, I'm having a problem installing a clean installation of Windows Vista Home Basic on Acer laptop from my friend.

  For starters, my friend got a red anti virus that has destroyed more or less its windows.  After doing a restore of the system for the first available date, the virus had disappeared, but Windows kept asking me how to open simple things like Internet Explorer and various other programs, which means that the OS is unusable.  My friend gave me permission to format the drive and I reinstalled Vista with a DVD of my I had to leave one of my PC, but I used the CD key on the laptop.  The installation went well, I went on my desktop PC and downloaded all the drivers for his laptop (Aspire 5516), and then installed a sound card driver and an update of the BIOs.  After updating the BIOs, the laptop starts again.  I tried to do a system restore but it had no restore points, then because I just started, I thought a quick format wouldn't hurt.
  This is where things went wrong.  I tried to reinstall Vista again, but it keeps hanging on the part "complete installation."  I tried three times so far and it always crashes at the same exact part, and now I have no idea what to do.
  Any suggestion or help would be appreciated, thanks.

  The copy of Vista, I use came from my college that I got for free to be in a computer SCIENCE major.  This isn't a particular manufacturer.

  EDIT: I apologize for not to say that from the beginning.  It is never used because I already had 7 at this time.
  In any case, I changed my BIOs native IDE or something of the sort, and I have Vista start.  I'm in shock, but I guess that when I flashed the BIOs, it's turned back on it to the wrong setting or something.  That's all I can think about.

• Installation hangs during the installation of Adobe Pdf Reader, MS Doc Viewer free of charge and same VS2010 c# Express

  For the last two months that I had trouble setting things in general, for example MS doc viewer for free and VS2010 c# Express.

  Yesterday, I tried to install the new version of Adobe Pdf Reader and had exactly the same problem again. I double-click on the executable installer, that it goes right up to 100% on the preparation and when it gets to the point when it should start the installation itself that the computer just hangs and installation does not.

  I'm almost certain that this is not a virus I have an up-to-date antivirus and run a scan complete of all the two days. He has never had any problems there.

  Anyone know what goes wrong? How do I put right?

  Help, please.

  Here's how to solve problems with Windows Installer: http://www.ehow.com/how_4813669_fix-vista-problems-windows-installer.html.

  If this does not work, try the Windows Installer Cleanup utility: http://www.softpedia.com/progDownload/Windows-Installer-CleanUp-Utility-Download-18442.html and see if that helps.

  Try to reinstall Windows Installer: http://www.microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en.

  I hope this helps.  If this is not the case, the issue may not be with the installer, but another problem, and we need to solve problems to try to find the problem.  Post back if this does not work and we will try other options.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista business 32-bit installation hangs on how to complete the installation...

  I have a laptop Acer Aspire 5532 with Windows 7 64 bit.  I want to install Vista 32 bit Business in a dual-boot configuration. (This configuration uses a commercial software test system)

  I created a partition logic, then booted from the Vista DVD, installed everything properly, but it always hangs on the last step when it's loading drivers.  Last page after the restart of the States: end of the installation... And then it crashes.

  I also tried to install on the main (active) partition without Windows 7 that have the same thing happen.

  I looked online and see that many people have the same problem, but none of their solutions worked for me.  The only thing I have not tried is to load an earlier version of BIOS.

  Thanks for any help!

  Daniela

  First, go to the site of the manufacturer of your computer, and check to see if your model computer has Vista drivers available for him...

  If the Vista drivers are not available for your model, forget the idea.

  http://www.SevenForums.com/tutorials/5166-dual-boot-installation-Windows-7-Vista.html

  See you soon. Mick Murphy - Microsoft partner

• 7 Parashara light installation hangs at about 98% and does not engage

  I have two Prashara light professional and personal, but during the installation, it hangs at about 98 percent where it says "installing...". Parashara 7.0 uninstall. " He does not engage after that. When I contacted Geosoft, they said to contact Microsoft.I using Windows 7 Ultimate 64 bit.

  The makers site says only he's WinXp & Vista compatible, no mention of 32/64 bit

  Have you tried to install it using different settings in win7 Compatibility Mode - see compatibility to win the support & help