Application of specification USB-TC01 for clarification

Similar Questions

• USB-TC01 gives error-201165 "firmware for this device is too recent.

  Not sure where else to this post, but the USB-TC01 DAQmx uses, so maybe someone recognizes this.

  I plug it to the USB port and it lists very well.  It runs the application very well canned.

  But when I try to take data under DAQmx 9.1.5 I get this curious message, as well as boards "Downgrade of firmware for this device" I don't want to do that.

  EDIT: I see that the firmware of the device is 1.1.0f 1

  The specifications of the USB-TC01 don't say what version of DAQmx is necessary, although 9.1.1 supports the device.

  I tried on XP and Win7 with the same result.

  TIA

  Ed K

  I guess that "ancient" is relative.  Budget and LV9 story of me and I have to stay on the DAQmx version.  But NEITHER finally took me in his Web and it's time for an upgrade.  A trial version of new LV and 9.9 DAQmx solved, of course.  I just wish that error message had been less weird.  At least, it is here for someone else could find an answer, no matter how obvious.

• Run a specific USB device automatically when AutoPlay is disabled?

  Very well. I decided to turn off the automatic reading and I want to control what makes a program when a CD/DVD or a USB device is inserted on my PC.

  How can I start a device specific USB automatically runs with AutoPlay disabled?

  The USB device, I am trying to run automatically is a USB from Magic Jack phone; Magic Jack program should start automatically and I have auto play off it takes about 1-2 minutes to load the application once I plug the device into the USB port.

  I hope I'm lucky and there is a solution. :-)

  YachtSkellington.

  Hi ByteBowser,

  Welcome to Windows Vista answers Forums!

  From Windows XP SP2, AutoPlay is enabled for removable drives also. This includes ZIP drives and USB mass storage devices. If you activate the settings disable AutoPlay, you can disable AutoPlay on a CD player, on removable media, on all players readers.

  When you set the option as options to disable automatic execution, it is set as default and no change is possible.

  However, in order to disable specific Autorun features in a selective way, you must change the NoDriveTypeAutoRun entry in one of the following subkeys in registry keys:

  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\policies\Explorer\

  The following table shows the settings for the NoDriveTypeAutoRun registry entry.

  Value	Sense
  0x1 or 0x80	Disables autoplay on drives of unknown type
  0x4	Disables autoplay on removable drives
  0x8	Disables autoplay on fixed drives
  0x10	Disables autorun on network drives
  0x20	Disables autorun on CD-ROM drives
  0x40	Disables autoplay on RAM disks
  0xFF	Disables autoplay on all kinds of drives

  Registry warning:
  Sometimes, this problem is due to two Windows that have been corrupted registry entries. To resolve this problem, you must use the registry editor to delete the corrupted registry entries.
  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  For more information, see the following article on how to disable automatic playback:

  http://support.Microsoft.com/kb/967715

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Connection 12 '' Macbook to Thunderbolt display does not work (USB - C for HDMI / Lightning)

  I have connected a retina 12 '' Macbook to a Thunderbolt display via two adapters, and no video is coming through.

  Here is what I use:

  1 USB - C for HDMI: (Apple USB - C to HDMI adapter)

  2 HDMI to Thunderbolt (Monoprice adapter)

  Any ideas what's happening? The Thunderbolt display is without a doubt, since power is to come via USB when I plug my phone directly on the back of the monitor. The Apple adapter works because I could try to connect directly to a LG monitor with HDMI ports.

  The present model 2015 MacBook 12 inch Retina does not support the Apple Thunderbolt display

  what I read.  The other models Apple Cinema can work if they are used with correct adapters

  as other brands. Some adapters support the audio, while others do. Note there is

  limits for the specifications of display supported; This can limit their usefulness if it is not better configured.

  Special adapters and cables can allow to configure some display options for use with the MacBook.

  The graphical support through MacBook, MacBook Air, MacBook Pro varies with the specifications.

  The absence of a Thunderbolt port, use of adapters to provide only what it can bear MacBook 12 plug-in software component.

  and the mini-display port cannot connect or transfer at frequencies Thunderbolt usage views. The

  cure should be taken as built-in support for this; If the adapters could carry signals. A new model

  could understand such an improvement; but there is nothing of this specification in the Apple Store again.

  • Use 4K views and Ultra HD TVs with your Mac - Apple Support

  Bolt of lightning • ports and poster: frequently asked questions (FAQ) - Apple Support

  • Get help with graphical problems on external displays connected to your Mac - Apple Support

  Good luck & happy computing!

• Update of the USB-TC01 Firmware

  I have a USB-TC01, and whenever I try to use it on my Windows 8 tablet it gives error-201168, with the text of 'Possible reason' doing this:

  "Firmware for this device is too old.

  Update the firmware for this device. »

  I get this error when you use LabVIEW 2011 so while trying to run the automatic test within MAX.  The unit currently has firmware version 1.0.0f1, and I found a page (https://decibel.ni.com/content/groups/tc01/blog/2011/05/23/ni-usb-tc01-101-firmware-update-now-avail... , indicating that he has a 1.0.1 version available, but ideally the download link no longer works.)  This unit works great on my Office Windows 7 in the Office last week, but now that I'm in the area I can't make it work.  I don't remember what version of NOR-DAQmx, I'm running on my desktop, but my Tablet has NEITHER-DAQmx 14.5, and I noticed that the only versions of DAQmx listed are 9.1 thanks to 9.9.  I can't imagine they took the features of future versions, but none of this makes no sense to me.

  Any suggestions?

  Edit: It seems that 14.5 DAQmx always supports the tc01s after checking the hardware compatibility list, so I don't know why the more recent editions are not listed on the download page for the driver for the tc01.  And it does not help my situation, where I assume that new versions of DAQmx will require an update of the firmware available to work with the tc01s.

  Hello Macraw83,

  In fact, updated the firmware of the device and DAQmx 14.5 and later version will seek this newer firmware.

  You can download the utily to update the firmware of your NI USB-TC01 from the following link:

  http://www.NI.com/download/NI-InstantDAQ-firmware-update-utility-1.2/5284/en/

  Kind regards

• How to make a USB-TC01 temperature data a global variable?

  Hi all!  I have a simple question (probably).  I bought the box USB-TC01 and with the software came a VI called LabVIEWTempLogger.  This VI reads a thermocouple voltage and internal conversions using DAQmx and a CYC edge to give a reading of simple temperature.  My problem is that I want to use this temperature in an another VI, then I want to make a global variable of temperature of LabVIEWTempLogger.  How to set a global variable such as temperature of LabVIEWTempLogger?  Thank you!

  You must get out of the recorder temperature VI the DAQ Assistant. Put it in a Subvi if you wish.

  Your main VI has some problems. The first fact a comparison is equal to the current temperature. Never make an equal comparison on a floating point number. Use in the range and force.

  The local 'Set Temp deg C' should be replaced by a wire from the Terminal. All local variables should be replaced by a wire. You can easily have the cable terminals from outside the main loop.

  Can't the difference in code in the States True and False when you read voltage.

  Don't use VISA bytes to the Serial Port. It's just bad style. You programmed it for a terminal character LF to get rid of fixed forward and set the number of bytes to read at a high number. Playback will wait until the stop character is detected and then automatically end.

  Finally, you have already created a world so I do not understand your questions about it.

• 0076WE remove USB-support for Scandinavian keyboards?

  The latest system available update (0076WE) outputs seemes usb support for Scandinavian keyboards, and I get put in English on USB keyboards whatever I do (on the folio from Lenovo and other USB keyboards).

  The virtual keyboard always takes care of the Scandinavian characters, and I can force Scandinavian installation connecting to Terminal servers and locking of the keyboard in the application.

  Someone at - he had a trick to solve this problem, or is the only option to wait for the next update of the system and hope it fix it?

  I found a solution, to run a full package of discount. The Scandinavian keyboard is working again.

• I need to make a usb bootable for windows 8.

  Bootsect.exe

  I can't download the bootsect.exe from the store.  Only get the file iso32 integer or an image file or download... Manager what is the problem?  I need to make a usb bootable for windows 8.  I am running windows 7 32 bit.  What's wrong with the instructions for download

  Go to the Microsoft Store website, sign in with your bank account, select Download Options and select Windows 7 64 bit and proceed to download.

  1. connect to your Microsoft Store account to view your purchase history

  2. search for your purchase of Windows 7.

  3. next to Windows 7, there is a drop-down list "additional download options.

  4. in the drop-down menu, select "32-bit ISO."

  5. right click on the link and then save the bootsect.exe file to the location where you installed the Windows 7 USB/DVD Download Tool (for example C:\Users\username\AppData\Local\Apps\Windows 7 USB DVD Download Tool).

  6. once the file has been saved, return to the Windows 7 USB/DVD Download tool to create your bootable USB device.

  or

  (1) download and install the Windows 7 USB/DVD Download Tool program, as described on the Microsoft Store website.

  (2) download a 32-bit version of bootsect.exe work. Here is a link to the 32 bit bootsect.exe:
  http://www.SevenForums.com/attachments/installation-setup/47060d1263222191-32-bit-Bootsect-bootsect7600x86.zip
  From: http://www.sevenforums.com/installation-setup/54443-32-bit-bootsect.html

  (3) once downloaded, copy the BootSect.exe file in the same folder that contains the file Windows7-USB-DVD-Download - Tool.exe installed. This file in Windows Vista's default installation directory is C:\Users\USERNAME\AppData\Local\Apps\Windows 7 USB DVD Download Tool\ (you need to look in XP)

  (4) application of the Windows 7 USB/DVD download tool as indicated on the web site of Microsoft Store. The end result will give you a boot USB flash drive that contains everything you need to install the 64 bit version of Windows 7.

• Driver Modem USB HSF for CX-9Z-NR0226 on Windows/8 not found.

  Apparently the dongle USB, Conexant, manufacturer is not a driver for

  Driver Modem USB HSF for CX-9Z-NR0226 on Windows/8 device.
  It came with a CD with the drivers on this subject in the directories: CX-FU02, CX-FU02 +, FU06, PCIE Modem and USB Modem CX_D400. and none of the drivers on the CD works with the device.
  My Lenovo laptop came with a connection via modem to this topic.
  Someone at - he found a way to run a software modem using this device?
  -Is Allen is-

  Hello

  Given that Windows 8 is a new version could not be applications/drivers designed for Windows 8. You can install application designed for an earlier version of Windows in Windows 8 by using compatibility mode. Follow the steps.

  (a) access to the start screen

  (b) press Windows key + C on your keyboard to show the charms (if you have a touch screen: touch the right edge of your screen and slide your finger to the center of the screen to display the bar of charms)

  (c) search for troubleshooting, click settings in the right-hand column.

  (d) click on troubleshooting. Click on run programs for previous versions of Windows.

  (e) click Next, select do not appear. Click Next.

  (f) click Browse and select the installation program that you downloaded via the link above.

  (g) click Next, click the troubleshooting program.

  (h) check the program worked in earlier versions of Windows but won't install or run now box.

  (i) click Next, select the latest operating system known to work (probably Windows 7)

  (j) click Next.

  Please refer to the article below:

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  Please let me know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved in Microsoft Windows.

• I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application also does not work for my site

  I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application does not also work for my site.

  Settings > privacy > location Services > confirm you always give permission to these applications to use your location.

  If not, try these standard troubleshooting steps.

  -Reset: hold the Home and Power buttons until you see the logo Apple (10-15 seconds).

  -Restore your iDevice: https://support.apple.com/en-us/HT204184

  If your backup is in iTunes, make sure that it is encrypted.

• USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  It's a new 12 '' MacBook

• 64 bit Windows7/8/8.1/10 USB drivers for Palm Desktop

  Thank you people much more to Aceeca.com (Palm OS Garnet NEW manufacturers), the USB drivers for Vista, Windows 7 and 8 Win 64 bit operating systems are available.  There are many users Palm Desktop 4.x strives also to the declaration.
  
  I have synced my TX my Vista64 laptop computer bits and Windows 8.1 HP spectrum X 2 hybrid successfully through my USB cable.
  
  The drivers are located here:
  
  Aceeca Driver Downloads

  (NOTE: as of today, 01/08/2016 Aceeca site to be down for 'construction'.)  Drivers can also be found here: http://www.palmdr.com/windows-7-64-bit-usb-drivers)

  Installation instructions for Windows 7 (from Aceeca) are included in the download.
  
  Basic instructions:
  
  1 download the drivers and extract them in the same folder.  Remember the folder that you extracted to.
  
  2. try to HotSync your device.  It will fail.
  
  3. open the Device Manager and look for the yellow Triangle next to the other "Acceca" or "'Palm device ' in the"Other devices"section."
  
  4. right click on the device and choose "Update driver software".
  
  5. choose "Browse my computer for software" and guide them to the folder that you extracted the drivers Aceeca.
  
  6 choose 'Next' in the driver and then file location window tell him 'Confidence always Aceeca Ltd. software', then click on the button "install".
  
  7. I received an error message (Vista64) who told me "the drivers have been installed, but the device could not be opened." I realized my TX had expired, and fell asleep.  I tried a HotSync and it worked!

  Good luck!

  NOTE: Palm Desktop 6.22 may only multimedia show and install.  Here's how to fix this:

  If Palm Desktop 6.2.2 shows only the media and installation, try this: right click on the shortcut for Palm Desktop, and then choose 'run as administrator '.  Other modules should appear.

  To Palm Desktop run as administrator every time in Windows 8 / 8.1:

  Close to Palm Desktop, if it is open.  (This is a very important thing to do when you use 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)

  Right click on the desktop icon of Palm in the metro screen, then choose "open file location".  You will now see the actual file for the shortcut.

  Right-click on the file "Palm Desktop" shortcut, then properties.  Now, choose the tab compatibility at the top.

  At the bottom of the Compatibility tab is a checkbox: "run this program as an administrator", click OK.

  Try to open the Palm Desktop, all parties must appear.  You can see a box opens when you close the program asking "did the program runs correctly.   I chose 'Yes', and it has been working fine since then!

  If you are using a much older PalmOS device and try using Palm Desktop 4.x, you will need this additional patch Pimlico Software:

  Palm HotSync configuration

  WyreNut

  Forum member bobboffin has added this message:
  
  "After you try your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step very difficult. It is me, and after some research, I discovered the following trick that allows Device Manager to display hidden and devices not present.
  
  Open Notepad and paste the following two lines are:
  
  Set DEVMGR_SHOW_NONPRESENT_DEVICES = 1
  Start devmgmt.msc
  
  Save it as SetDev.bat in My Documents.
  
  Open My Documents in Windows Explorer and double-click SetDev.bat. Device Manager opens.
  
  On the view menu, select Show hidden devices.
  
  You can now see in the other position of the device with a yellow triangle against it.
  
  You can now proceed to install the drivers according to the instructions.
  
  Note that the driver supports most versions of Palm OS. "I actually use an Aceeca Meazura 1000 rugged PDA running OS 4.1 - bobboffin.
  
  I hope this helps!
  
  WyreNut

  pattirclark wrote:

  
  

  SUCCESS... After writing my last response indicating no connectivity, I tried a last time and success for the Palm Palm devices and synchronization with 64-bit Windows 8 71 22.  Thanks again to WyreNut for all the support that I know that this Forum is an advantage for those who have limited computer knowledge and detailed suggestions has worked perfectly...

  Thank you again...

  And thank you! pattirclark!  You are the first person to report success with drivers Aceeca and Windows 8!

• USB enclosure for HDD GB 900

  Nice day

  I have a HP 900 GB HDD and am looking for an enclosure for the USB adapter.

  model # EG0900FBLSK

  part # 619286-004

  I'll try to find a USB enclosure for the HARD drive and the 'standard' ones sold in big box stores do not work. It seems that the pinout have a different connector than the other HARD drives.

  at - it anyone Kow where a USB box can be purchased?

  Thanks yo.

  DH

  What you have is a SAS hard drive from a server.  There is NO direct way to jump a dedicated SAS controller card, which can be more expensive that the disc is a value.  A new Seagate 1000 GB (1 TB aka) is less than $50, one sliding USB 3.0 external in case $30 or the whole in a portable case point is only $ 57.

• USB drivers for HP50g on Windows 8 (64-bit)

  Hi all

  Has anyone tried installing the USB drivers for the 50g on Windows 8?

  Conn4x installed well but USB drivers comes. I tried all available troubleshooting options using the features of Windows 8 compatibility (XP, Vista and 7) and none of them worked.

  So I was wondering, maybe someone here may have already installed and could share some tips.

  Thank you

  Márcio

  I read messages in other forums indicating that the conn4x and the USB driver peut be installed.

  The post on the forum indicated that Windows 8 comes pre-configured with the possibility for signed drivers enabledapplication.

  In order to install the USB driver, signed driver enforcement must be disabled.

  See this forum comp.sys.hp48 post it here:

  https://groups.Google.com/Forum/?fromgroups#! searchIn/comp.sys.HP48/win$208/comp.sys.HP48/tzpjXzysXrU/-XZbRLN2CucJ

  Please inform the forum if you succeed, and what measures allowing you to complete the installation.

• If I transfer the application to Ninja Stealth Drive for MacBooks folder it works from there?

  If I transfer the application to Ninja Stealth Drive for MacBooks folder it works from there?

  The Applications folder should not be moved to separate from the full operating system.

  (141293)