Installation of HP Phphotosmart 2610xi on HP Pavilion dv5237cl Notrbook using Vista

Similar Questions

• Installation of Win 7 RC on HP Pavilion DV6-1130sa

  I have the following questions regarding the installation of Win 7. The disc is currently containing the Vista partition and the recovery partition. I want to install then I 7 RC as a new installation on drive C with the possibility to go back to Vista if you need and have the laptop works on the original factory configuration.

  (1) if I do a fresh install of Windows 7 on the hard drive with Vista Home pre. 32 bits (including the recovery partition), the recovery partition will stop working (IE from the trunk F11 option included)?

  (2) if the recovery partition does not work afterwards, if I use my restore dvd copy I ve created, it will create the restore disk partition hard like it was form the factory? and let me go back to vista home Prem

  Please let me know if there is anyone out there who have tried the above with their HP laptops.

  Thank you for your time to help me.

  Ruwsoft

  Hello

  First make the Vista backup. How all the information here.

  (1) If you leave parition your recovery there is work.

  (2) so it does not restore partition, it will automatically recover your system.

  You might also be interested in dual boot.

  This way you will have the possibility to use the two system on a laptop computer.

  How dual boot Windows Vista and Windows 7 (Vista installed first) information here

• Drivers for HP Pavilion Entertainment PC running Vista Home Premium, downgrade to XP Pro

  I have a laptop HP Pavilion Entertainment PC running Vista Home Premium. Want to downgrade to XP Pro and have an OEM drive to do. Can someone help me find the drivers to complete this process?
  Thank you!

  http://welcome.HP.com/country/us/en/support.html

  Look at the link above of HP XP drivers.

  If the XP drivers are not available for your model, forget the idea.

  If Yes, download and save to a CD or Flash drive.

  Save all your data because it will be lost during the installation of XP.

  Then follow the steps below to do a clean install.

  http://www.winsupersite.com/showcase/windowsxp_sg_clean.asp

  Once installed, reload ALL your other programs of original media, or download again.

  Reload all drivers and utilities for your motherboard.

  See you soon. Mick Murphy - Microsoft partner

• HP Pavilion dv5237cl Notebook intermittently Shuts Down Due to a thermal event, fan stops working

  Basics:

  HP Pavilion dv5237cl

  Windows XP SP3 32 bit

  PCMCIA SATA card

  1 TB WD Scorpio blue HARD drive

  Computer laptop with 200mm fan cooling pad

  Some USB devices

  Latest drivers and BIOS

  Note: This problem also occurs with Windows 8.

  For the last year my HP Pavilion dv5237cl turned off because of the fan does not work.  I have never seen the term "Thermal event" displayed prior to or on restart.  Usually just abruptly, he died.   I also saw a few BSOD that are not very descriptive to pointing to what the cause was and may be not related.  The laptop usually just stops working and goes out, maybe once every couple of days if it is caught in time.  I HAV been using a Defragmenter memory to help as appropriate the BSOD were due to low memory resources.  I am tracking the temperature of the CPU and have noticed that it is high, when the fan is not working.  I saw up to 85 C and I'm not sure but think that the laptop stops at 100 ° C.  The fan is usually always go at least to a low hum.  Usually, on startup, I get a strong burst of activity fan and if this isn't the case I'm clued in to a fan, not to exploit the condition.

  If I take a PIN regularly and carefully stitch it through the opening in the fan and cause rotate the blades of the fan, the fan will usually start working.  It sometimes takes a few tries.  I noticed the fan poll as it is sometimes wobbling and resembling a noise of ball bearing, but I think it is also maybe a hinged fan.  Some hopping may be due to the time that I used the pin code.  Fan usually settled in a low purr and lately with some ball light bering sound, maybe just wobble.  If I'm not there when the fan stops working or do not notice to try to remedy with a PIN, then the laptop stops due to excessive heat.

  Things I've tried or thought of trying:

  -J' I used canned and out air / blow accumulated debri from inside the vacuum cleaner to suck up and cleaned the vents.

  -J' I add the cooler that keeps time less around 5 c.  The laptop temperature was 55 to 62 C this winter.

  -Install the latest drivers and BIOS.

  -Tried to use Windows 8.

  -J' bought a replacement fan but did not want to disassemble the laptop to install it and also not be

  not know if it is really a material fan or a control sensor or other hardware problem or software problem.

  Thanks in advance.  Help to solve this problem would be appreciated.

  I understand that your laptop stops due to overheating.

  Given the behavior and how the fan no longer works and must be "started" once again, this does not sound like a fan failure.  Page 5-60 of this guide details the process of replacing the fan and the heatsink in Notepad.  If this is something you'd rather not do it yourself, you could contact a local PC shop for the fan and the heat sink replaced.

• Pavilion 500-420nl: installation of a new GPU in HP Pavilion 500-420nl

  Hello everybody, basically, I bought a HP Pavilion 500-420nl PC and decided to improve a bit with a new power SUPPLY and GPU. The new PSU: Thermaltake Berlin 630W and the GPU is Sapphire R9 270 X double-X OC. The problem is that when I insert the GPU and connect the 2 connectors of 6 pins, I get only a black screen. There is no beeps, the fan runs but the screen remains black. I deleted the old GPU drivers and the new one is plugged correctly, but there is only a black screen. The motherboard should be compatible with the GPU, seeing that it has a PCI-E x 16 slot 3.0. What could be the problem?

  Hello

  Please see the following documents.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

• Missing drivers for the new installation of XP SP 3 on HP Pavilion 500-202eo

  Hello.

  So I tried to make XP SP 3 to work on my new desktop HP Pavilion 500-202eo. I have partioned the disk in two and was able to install and modify Windows 7 on the other partition, largely with the support of the HP drivers for my model successfully. However I have not found any support for XP drivers for this model, or any other similar models in the 500 series with APU AMD A6 material - 6400 k Radeon HD graphics card. Installing XP went well, but I'm not having any sound, internet or USB 3 support options. In Device Manager, the following components are marked in yellow with the error code 28:

  Audio device on High Definition Bus Audio

  Ethernet controller

  Network controller

  SM Bus controller

  USB controller Universal Serial Bus

  Video controller VGA compatible

  I tried to install the drivers Realtek for XP at least addressing the absence of sound, but it doesn't seem to make a difference, and when I point the Add Wizard of material on file with the drivers Realtek he says that it cannot find the correct drivers. You have any suggestions where I can find the software needed?

  Hello:

  I doubt that you will be able to do all this work, but that's...

  Your PC has the IDT audio controller so the Realtek audio drivers do not work.

  First install the AMD chipset driver and restart. You want the first file in the list.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%20XP%20-%20Professional/home & RenderOnServer = true

  Graphics: See if this driver works...

  http://support.AMD.com/en-us/download/desktop?OS=Windows%20XP%20-%20Professional/home & RenderOnServer = true

  Ethernet: DL and install the driver Windows of the 3rd group of ethernet cards (pilots AR816X QCA817X family). It would be the last driver in the section.

  http://www.QCA.Qualcomm.com/resources/driverdownloads/

  Try this driver for the wireless card:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5229457 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118499_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Audio: See if it works...

  Scroll down to the bottom of page to:
  
  IDT_HD_Audio_6469_xp_win7_win8.zip

  http://www.driversguru.com/HardwareID-HDAudio---FUNC_01-_-VEN_111D-_-DEV_76D9-_-SUBSYS_103C3387

  All audio drivers it try also.

  If the chipset driver above does not install the smbus controller, I enclose the smbus controller below in attachments driver files.  Download and unzip the file.

  Go to Device Manager and click on the smbus controller device.  Click the driver tab.  Click on set to update driver, and then select manual search method.  Select disk, and then locate the file you unzipped\SMBUSamd

• Installation Windows 8 operating system from hp Pavilion 15-e057se on another drive partition recovery

  Hello

  My computer hp laptop pavilion fell and hard drive died recently. There were two partiions hard disk. 1 has a recovery partition which came with the laptop and the remaining disk space I formatted in a drive c: for use. After the crash of the partition on the c drive is not accessible, but the recovery partition is accessible when the disc is connect via USB on another pc. I faced the 16 GB of data from the recovery partition that has Windows 8 OS and other things. I do not got any dvd with the laptop and assume that this partition is what I use to reinstall windows on a new hard drive 8. Now, I want to know that if I copy this folder on a USB data recovery, will it boot and install windows 8 in laptop computer on the new hard drive or I'll have to do a few other steps in addition to make a bootable usb key

  OK, then we will force windows to find a key for you then:

  (merged to another answer link)

  erekQ

• Installation of Windows 7 Professional on HP Pavilion g6-2394-nr

  Good afternoon...

  My son bought a HP Pavilion g6-2394-nr computer laptop, but couldn't live with Windows 8, so I tried to install Windows 7 Professional (64 bit) on the laptop instead.

  I read some posts on this site regarding doing the same thing with similar patterns of g6 Pavilion and were able to get closer to all of this work, but a problem is just to beat me to death.

  I can't the USB ports work, or get the audio to work.

  Based on the advice I found here, I went on the AMD website and installed the software of catalyst for the processor and also the software for the video card, and they seem to work well.

  Can you please tell me what I should do to get the USB drives and audio to work?

  Here is the information I have at the moment...

  Processor: AMD A8 - 4500M

  Graphics card: AMD Radeon HD7640G

  Chipset: AMD K15 BMI REV 00

  Southbridge: AMD 08 FCH REV 2.4

  Open Host USB of HCD standard controller:

  PCI\VEN_1022 & DEV_7807 & SUBSYS_1849103C & REV_11 PCI\VEN_1022 & DEV_7807 & CC_0C0310 PCI\VEN_1022 & DEV_7807 & SUBSYS_1849103C

  PCI\VEN_1022 & DEV_7807 & CC_0C0310

  PCI\VEN_1022 & DEV_7807 & CC_0C03

  USB root hub:

  USB\ROOT_HUB & VID1022 & PID7807 & REV0011

  USB\ROOT_HUB & VID1022 & PID7807

  USB\ROOT_HUB

  Host USB compliance Test Controller:

  PCI\VEN_1022 & DEV_7808 & SUBSYS_1849103C & REV_11

  PCI\VEN_1022 & DEV_7808 & SUBSYS_1849103C

  PCI\VEN_1022 & DEV_7808 & CC_0C0320

  PCI\VEN_1022 & DEV_7808 & CC_0C03

  xHCI Host controller of compliance Test:

  PCI\VEN_1022 & DEV_7812 & SUBSYS_1849103C & REV_03

  PCI\VEN_1022 & DEV_7812 & SUBSYS_1849103C

  PCI\VEN_1022 & DEV_7812 & CC_0C0330

  PCI\VEN_1022 & DEV_7812 & CC_0C03

  AMD High Definition Audio Device:

  HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1003 HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100

  Any help would be greatly appreciated.

  Hello:

  Install the amd chipset driver and restart.  You want the 3rd file listed (53 MB).

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

• Special concerns for installation of WIN 7 Premium on HP Pavilion XP Office a1630n?

  Is anyone aware of any special instructions to install WIN 7 on my a1630n years 3 with XP installed? I bought a copy of WIN 7 at Staples retail. I backed up all my data.

  How can I easily find programs I have on the machine are WIN 7 compatible - such as Diskeeper, Quicken, various products of Symantec/versions?

  HI BOBiii,

  The Windows 7 Upgrade advisor will tell you what software and/or hardware may not be compatible with Windows 7.  You can download it here: http://www.microsoft.com/downloads/details.aspx?FamilyID=1b544e90-7659-4bd9-9e51-2497c146af15&displaylang=en

  Be aware that you cannot upgrade a Windows XP installation to Windows 7, and you will need to do a clean install.

• Installation of Windows 8 for the G71316DX Pavilion

  Hi, I have a 64-bit version of windows 8 pro disc that I'm putting on my laptop which has Windows 7 Professional and it doesn't, it's reading the disc perfectly well, but he continues to stop at 46%, either 30% I mean if it's reading the disc very well so I guess is not the driver who is wrong and Yes I downloaded it from the website of HP, any help?

  It turns out that dic was the problem - no idea what happened here, but oh well, it's fixed!

• Installation of XP home on a HP Pavilion Slimline from a cd of XP Acer House?

  I need to know if I can use my XP home cd to install on my HP Pavillion Slimline.My XP Home cd came with my desktop Acer of death now. The HP I have recived running Vista at the moment but is coruptet and freezes all the time, and since I don't like Vista I wantet to switch to XP.

  As I was wondering if I can use the productkey of my home XP to install XP Pro (which I lost the original key) in the case of my Acer cd does not work?

  Thank you very much.

  Hello

  Legally, you can't do that and it may not work at all because you CAN install it, but you CAN'T activate it. I'm sorry.

  Kind regards.

• installation of a new dvd in hp pavilion a730n burner

  My old dvd burner installed in these slick ide cables.  This new dvd burner has e-sata cables and said to connect on a direct x 9 sound card.  There is a card plugged into the motherboard but I don't think it's a sound card and there is no cable on this topic e-sata port.  I think my computer has an internal sound card?  I can see if a cluster of four e-sata ports of different color on the lower right corner of the motherboard.  One of the ports, the black has an e-sata cable that comes from a rectangular box at the front of the computer (hard drive?).  The other three ports are empty and different colors. Connect the cable e-sata burner dvd into one of these ports?  And if so, is it important what color?

  Thanks for any help, I'm not very computer literate.

  I found a post more soon similar to mine.  Looks like any e-sata port I plug.

  Thank you for this forum.

• Pavilion 500-189: usefulness of adding additional memory to a computer desktop Pavilion 500-189

  Hi - I think adding memory RAM additional to my desktop HP Pavilion computer model 500-189, bought in February 2014. It runs under Windows 10 home ed., 64 bit with RAM total to 10 GB. The computer has 4 memory slots and currently only 2 are used: slot 1 has a card 2 GB Hynix/Hyundai 1600 MHz and slot 2 has a card 8 GB Kingston 1600 MHz.

  I'm currently pondering adding a single 4 GB DDR3 1600 MT/s PC3-12800 CL11 map of 240 pin unbuffered UDIMM in each of the last two slots to bring the memory total amount up to 18 GB. The total cost would be less than US $40.

  My question: This inexpensive upgrade will not improve the performance of my computer or is - this exaggeration only change?

  Comments or suggestions would be greatly appreciated.

  Graphene, welcome to the forum.

  Now, we are dealing here with reviews.  The sweet spot for memory seems to be 8 GB with Win 10.  In fact, I read that you will be hard to see a difference between 8 and 16 GB.  I use a laptop of Omen HP with 8 GB memory game.  It manages all the games that I played very well.  As you said, you already have 10 GB of memory and the processor is very fast.

  Yet once, is discussed in the opinion.  In my opinion, the best upgrade that can be done today is an SSD.  My HP Omen loads games and programs incredibly quick and starts in 7 seconds or less.  I used a Samsung EVO 840 500 GB SSD in HP Phoenix Gaming desktop computer.  Again, it was incredibly fast.  Here is the SSDthat are recommended by Crucial memory.  They make great products for OEM computers.  I found the research that Samsung SSD seem to work better with HP motherboards and normally don't require changes to the BIOS works properly out of the box.   In addition, Samsung has its own Migration of data and Software Wizard software to fine-tune the SSD after installation.

  This should give you pause.  If you decide to go with an SSD, I'd be happy to tell you how I did the installation.  It has worked well for me.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP pavilion 14-n019se used completely shut down.

  Pavilion HP 14 with touchscreen Windows 8 whenever I press the button to turn off the screen go but keep turning on the power button and the fan too, I waited about 5 hour nothing happen I reformatted and I got the same result, updated to 8.1 and I tried the latest version of the driver from the hp website same result, I thought it was a hardware problem, so I tried to install win 7, it worked perfect.
  
  Note that I had a lot of problem with the ati driver installation for windows 8.1 of the HP site it does not recognize the graphics card, so I installed the driver of ati 14.4 mobility. and I got the last update of the bios.
  
  anyone has any ideas to solve this problem.

  Found a solution, press SHIFT and select stop work like a charm.

• On HP Pavilion laptop computer on Vista do "Windows failed to load because the system registry file is missing or damaged."

  I have a HP Pavilion laptop and I got this error message "windows does not have load because the system registry file is missing or damaged.  then he said that I could insert the windows installation disc, I did not.  Thank you.

  Original title: a registry file

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't work, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the above does not solve your problem, it's the Information from HP to solve problems with their computers, including the reinstallation of the operating system by pressing F11 at startup.

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703#MicrosoftRestore

  For the HP Recovery Manager.

  The backup and HP Recovery Manager on HP Pavilion and Compaq Presario computers is a versatile, easy to use application that allows you to:
  • Create a set of recovery disks operating system

  • Recover the PC to the State of initial operation critical system failure

  • Use the extra discs that are available with recovery disks

  • Backup and restore important files

  • Reinstall the applications or specific drivers

  • Restore the computer to an earlier point in time

  • Check the status of the PC and installed files

  • Do not delete the HP recovery Partition

  See you soon.