Installation of the HP Photosmart C4480 all-in-one - code 15471570 error condition

Similar Questions

• HP Photosmart C4480 all-in-One gives the HP Solution Center error

  Hello

  I have a HP Photosmart C4480 all-in-One printer. I also have a laptop HP Compaq Presario CQ60 with Vista.  These two are under the age of one year.

  I just used the ink contained in the supplied start with my printer ink cartridges, so I replaced the. The problem that I was going on even before I replaced the cartridges.

  When I run the HP Solution Center, it says at the top:

  "HP Photosmart series C4400

  Disconnected! »

  When I click on the Toolbox, it gives me an error will appear: "the computer is unable to establish two-way communication with the device.

  Well, it is certainly connected and it prints, copies and scans very well.  I'm used to be able to check on my ink level. Now, the solution Center think my printer is not yet connected.

  Any ideas?

  Thank you!

  HP Envy m7 running Windows 10.

  Simply click on the star

  Thank you

• HP Photosmart C4480 all-in-One takes forever to print

  HP Pavilion dv6-6061eo laptop

  Serial number [personal information deleted]

  Prod, number: LQ769EA #UUW

  Printer: HP Photosmart C4480 all-in-One connected USB

  Operating system: Windows 7 - all updates - updates of August incl. -ETH on

  Troubleshooting done - but all the reports in the order

  My Tech expertise is intermediate.

  No new software has been installed

  Laptop has worked without problem with a printer HP Photosmart C4580 in Scandinavia, but after my return to France where I use a HP Photosmart C4480 takes forever to print even a single page.

  Hello

  Curiously, the problem has now been resolved by changing the ink cartridges HP with a new set of HP ink cartridges.

• Impossible to analyze using Photosmart C4480 all-in-One

  I use the Photosmart C4480 all-in-One on a Mac, 10.6.8.  Impression always worked without problem but digitization has never worked.  Today, I realized that the software provided with the printer is by OS 10.5 (HP Scan Pro always gave me an 'unknown error' popup).  I downloaded version 10.6 on the HP site and installed on the old software.  I opened the new HP Scan, select a profile and press Scan and the program froze and I had to force quit.  I tried several times and it kept happening.  The all-in-one has a screen where you can scan a computer to the unit, and I tried that as well.  The program "Open in Preview" open on my computer, and the screen on the all-in-one read "Scanning" for a short time but then returned to the menu analyze.  Nothing happened on my computer or the scanner.  I decided to uninstall all the HP software and reinstall version 10.6, where crushing the 10.5 version had caused these problems, but after doing so I got the same results scanning HP and analysis on the all-in-one.  Thanks a bunch if you can help!

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD that is not marked as compatible with the 10.6/10.7 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!

  Finally, download and install the latest software for your printer from the "Support & drivers" link at the top of this page.

• Why my HP Photosmart C4480 all-in-One printing after I removed a paper jam not?

  When printing, I added paper into the tray paper, and the rollers grabbed the entire stack of paper. The printer has stopped, noting "paper jam". I removed the stack of paper in the printer, and now it won't print at all.  (HP Photosmart C4480 all-in-One)

  Thanks for all the useful things try, but without apparent reason, the printer started working again.

• I have a photosmart C4480 all-in-one who needs a new cord.

  My photosmart C4480 all-in-one needs a new cord as the current no longer matches the printer tight enough.  I have to hold the cord in the right position in order to print anything at all.  How can I get a new power cord?

  Do you need a power cord or the power module?  The cord is a standard element that can be found in any computer or Radio Shack.  The module is part number 0957-2231 as appearing on the HP Site's Partsurfer.

• TWAIN plug-ins for the hp Photosmart C6280 all-in-One for Photoshop to Macintosh

  Where can I download the Photoshop (CS4) for Macintosh plugin twain for hp Photosmart C6280 all-in-One, so I can scan from Photoshop?

  The HP software only provid ICA interface support (purchase of Apple's Image Capture) which is the native OS X interface.

  TWAIN interface is no longer available for OS X, which means that you will not be able to scan from Photoshop from Adobe directly because it doesn't support the TWAIN module.

  You have to parse through Capture of Image, then you can open the files analyzed on Photoshop.

  Shlomi

• Problem with the HP Photosmart C7280 all-in-one printing. Ink system failure could not copy-

  I'm having a problem on my HP Photosmart C7280 all-in-one printing. The following message appears, this is what came on the screen of the printer: ink system failure has not not able to copy, receive faxes or print. Refer to the documentation for the printer error O.cl9a0007.

  Does anyone have any suggestions?

  Hey Spider! First of all welcome on the forum.

  I recommend to remove all ink cartridges, disconnect the USB cable from the computer that connects to the printer and then turn off the printer completely by unplugging the power cord. Then, restart your computer. Turn on the printer but leave that he disconnected from the computer. After that he ended his power over the cycle forward and reinsert the ink cartridges in the printer and make sure their seat correctly.

  After you have all the cartridges in the printer correctly, then connect it to the computer. See if that fixes the problem. If not post back with no results.

  Thank you

  SeanS

• HP Photosmart 3210 all-in-One of network error printing from Windows 7

  Impression on Photosmart 3210 all-in-One on the home network in Windows 7 Acer Aspire laptop breaks down

  -message is "error printing".  Printing to the same printer via USB connection is successful.

  Printing by the same network of other Windows 7 laptop (Sony) and Windows XP (Dell) works very well.

  Used HP diagnostics to ensure drivers/software updated and used HP network diagnostic utility

  to confirm the printer is visible on the network that it is. When the printed test page is selected, but nothing happens.

  Hello

  Thanks for posting,

  This may be a problem with ports,

  Please click on start and then click on devices and printers and then right-click on the Photosmart 3210 printer and click printer properties. In the printer properties window, click the ports tab and check if the selected ports is with the IP address of the printer also check if it is the WSD port. If the selected port is not the one with the IP address of the printer, select one with the IP address of the printer and also make sure that it's not a WSD port and the TCP/IP port. If a selected port type is WSD, select Standard TCP/IP port with the IP address of the printer. If you can't find any port in the list with the IP address of the printer, and then click Add port and then select TCP/IP Standard and enter the IP address of the printer in the address field and add the port and then click on apply and then try to print.

  If the problem persists even after ensuring that the selected port is with the printer IP address o FLE, then try disabling the firewall installed on your computer (if any) software and then try to print.

• 'New' (to me at least) Photosmart c4480 all-in-One

  I just took a lightly used HP Photosmart c4480. The family that bought provided all the documents provided with the printer. as well as the installation CD.  The original receipt dated 21/10/08. As it was before the release of Windows 7, the installation CD refers only Widows XP and Vista.

  Can I use this CD to install the printer? Can I find drivers that will make this unit operate within the Windows 7 platform?

  I thank in advance

  Hello

  Thanks for posting your request,

  You will not be able to install the drivers on the Windows 7 OS by using the CD that came with the printer.

  In order to install drivers on windows 7 operating system, please download the drivers from the link below and install it:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-74899-1&CC=US&DLC=en&LC=en&os=4062&Product=3418705&sw_lang=

  Thank you.

• HP PHOTOSMART C4480 All in One

  I replaced the old cartridge with a new one and the printer would not accept.    The message was - is

  (a) cartridge incompatible (even if it was the same as the former) or

  (b) poorly installed cartridge.

  With the help of two other members of the family, used for this printer, the cartridge was accepted and I was able to print 15 copies successfully until the printer started to play up again - as in (a) and (b) above.

  Please can anyone suggest what I can do next to get the printer to operate?

  In the paper here troubleshooting steps can help solve your Photosmart C4480 cartridge error messages.  I recommend to go through all the steps in order, do not forget to clean the electrical connections as shown in the three solution.

• Stuck on "Checking system" during the installation of the driver. J4580 all-in - One Printer, Windows 8 64-bit

  Hi all

  I have no idea why it doesn't work. For always remains in stage "verification system. There is no bar of progression, just an of these in loop task bars, so I can't say if something is really installation. Does anyone have a solution for this?

  Thank you!

  Janek

  Hello again,

  I followed the steps and even once, it did not work. However, I found a solution

  I tried to install the software after I cleaned the temp folder and did a clean boot, but the same questions redoubled. I opened the Task Manager and I force closed "HP Installer re-install Plug In (32 bit). This caused an error that caused the installer to uninstall/delete anything on my computer. When I tried to install the software after that, it worked. Clearly there is something already on the system at the origin of a problem.

  Thanks again for your help!

  Janek

• installation of the pilot for ho all-in-one 4500 g510n wireless

  I received this printer from my son with no software. I logged on to HP and tried to install this printer driver. When I am at the screen that says it's the extraction, I got a pop up that says "the system cannot find file specified." Don't know what to do next. can you help me?

  Hello
  Follow the steps below and check if this may resolve the issue:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Message or incompatible cartridges on HP Photosmart C4480 all-in-One Printer

  I changed my color ink cartridge (a 75XL) on Monday, 16/04/12, and everything printed fine Monday.  I turned off my HP Pavilion laptop and printer on Monday night.  Tuesday, 04/17/12, I started working on my laptop and when I tried to print the small printer screen says "not compatible ink cartridges and my laptop screen said" the next cartridge has a problem: black ink cartridge '.»  I had kept the black in (a 74XL) cartridge because he still has a lot of black ink in it.  I removed the color and black cartridges, made sure that the point of contact with the printer is clean, so that both cartridges have ink in them and they are placed in the correct locations (black on the right) and the cartridge color left.  I don't know why I get these messages and why the printer does not print when he did print Monday after changing the color cartridge.  The two ink cartridges are XL, but they are not identical. The black ink cartridge is more horizontally (fate of the stick to the door of printer cartridge) further than the color ink cartridge.  The two are the same vertically / height.  Both cartridges are the type "XL".  I tried to download and use the diagnostic tool and it has led to tell on the screen of my laptop there is no problem with the printer.  Can an HP agent contact me and help solve this mystery.  It's very frustrating because I only use HP products (including two ink cartridges); and if I had to buy new cartridges, how do I know that this problem is happening?  Help please!  My email is [removed personal information] Thank you.

  Hello

  Please see the following link for t\s on this issue.

  http://support.HP.com/us-en/document/c01442936

  If the t\s has been completed restore printing to its default settings, remove the cartridges from the printer.

  Steps to follow:

  • Start button / stop + Combo Cancel button
  • Enter the combination of special keys 1 [Scan] 3 [color copy] 2 [Black copy]
  • "Support menu" will be displayed
  • Press 2 [Black copy] until the display shows "Reset Menu".
  • Press the 3 [color copy]
  • Press 2 [Black copy] until the display shows "semi-Full reset".
  • Press the 3 [color copy]
  • The printer shuts off and turn on by itself, else wait for 20 seconds and power on the printer

  Note:

  All user settings will be restored.

• Invalid double-sided printing on the HP Photosmart C6280 all-in-One (printer, Scanner, copier)

  On my 'old' computer (ca. 1974) the print mechanism duplex worked fine, but after that I installed the printer on my 'new' PC (Windows 7, 64-bit), the double-sided printing feature works not at all (although it allows me to print on both sides manually).  In order to operate as it did in the past, should I uninstall everything related to the printer before reloading the software?  Or do I have to reload the software at all?  Or what should I do?  I would like to know before taking any action, because I don't want to create problems for me or my computer/printer.

  The duplexer must be set to "installed" as described in The Vista/Windows 7 Duplex Printing Guide troubleshooting here.  You will not need to uninstall and reinstall the driver.