Installation of the normal print cartridges or I have to delete them use later?

Similar Questions

• HPO D5560 not print with the black print cartridge

  Having a D5560 printer which stopped printing with the black cartridge.

  Thought it was the cartridge has installed a new (only use HP cartridges) no difference

  After thinking the Black just stopped - no phasing-out quality, etc..

  Ran the cartridge filter (all levels of cleaning) no difference

  Print well if I remove the black cartridge so that the Tricolor print black but it's only good to work around the problem

  I use this on Windows 8.1. It worked fine for months

  Can't think that I had installed recently HP driver updates

  I have a hardware problem?

  Thanks for any input

  See you soon

  Geoff

  OK, so it's weird.

  Just thought to connect my netbook windows 7 into the printer.

  It print very well with the black print cartridge.

  Sent a work computer Windows 8.1 and now prints fine in black of the black cartridge.

  Problem solved, but I'm losing the plot!

  See you soon

  Geoff

• LaserJetPro M201dw: Error Message on new HP LASERJET PRO M201dw - "install the black print cartridge.

  Hi, we have a new printer HP LaserJetPro M201dw. We put up this morning, following the instructions as stated in the manual, but the printer keeps blinking and say "install the black print cartridge or clear jam."

  The printer has never been used, so there is no jams, and the ink cartridge was too brand new and a black cartridge HP official. The printer does nothing, it doesn't print, I can't do a cleaning page, it simply does not work. I tried resetting, disconnected from the power supply from the mains and put it back, and we tried a second new ink cartridge, he pulled several times and it still says "install the ink cartridge. I is not a jam in the printer at all. I tried following the recommended steps for others who have had the same problem, but always without success.

  The printer has been installed successfully on my Windows Vista computer, but the same error message appears on my computer when I try to print directly from the computer.

  I would be grateful for any suggestion. Thank you very much.

  You probably have a joint expedition on something.  It really is a common thing, now it's HP shipped toner in printers take the tray, toner, open everything. Tilt the machine upward, look inside, etc.  Use a flashlight if you have not entered of lights in the room.

  If it's blue or orange, a transport lock.  It could be as simple as a piece of tape, a plastic tie or a block of expanded polystyrene (white).

• Is there a 1st and 2nd generation of the HP62xl printer cartridge as if it was with th HP61xl cartridge?

  Is there a 1st & 2nd generation of the HP62xl printer cartridge as if it was with th HP61xl cartridge?

  Hi @tollymcc,

  Welcome to the Forums of HP Support! I see that you would like to know if there is a 1st & 2nd generation of the 62xl HP cartridge. I would like to help you today.

  I came across this information on 1st & 2nd generation cartridges, cartridge more / cartridge of generation more (HP61, 301, 122 and 802). It doesn't look like the HP 62xl is included.

  It will be useful.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• Windows cannot print due to a problem with the installation of the current printer.

  Thread title: Epson TX235W will not print

  When I click on 'print', I get the print control. the box that tells the printer how many copies, etc.  When I toast 'print' it get a little box that says Windows cannot print due to a problem with the installation of the current printer.  Try one of the following:

  Check the printer by printing a Windows test page

  Ensure that the printer is online and on

  Reinstall the printer driver

  I did everything above and I get the same result.

  Help!

  Hello

  Did you of recent changes made to your computer that caused the problem?

  This problem is limited to a particular application?

  How is the printer connected?

  Method 1) restart the print spooler service and delete the print queue

  Start the print spooler service in the Services console

  1. Click Start and run, type services.msc, and then click OK.
  2. Right click on the print spooler service, and then click on stop.
  3. Right click on the print spooler service and then click Start.

  Start the spooler service for printing at the command prompt

  1. Click Start, run, type cmd, and then click OK.
  2. Type the following commands at the command prompt:

     net stop spooler
     net start spooler
     Output

  Note: Press ENTER after each command line.

  Cancel printing

  http://Windows.Microsoft.com/en-us/Windows-Vista/cancel-printing

  Method 2) remove and add the printer and then check.

  Add or remove a printer (Applicable for Windows 7)

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  It will be useful.

• Windows 7 cannot print - "Windows cannot print due to a problem with the installation of the current printer"

  Window 7, Lexmark 1300 series. Cannot print. When you try to print from Notepad, the error message is "the system cannot find the file specified." What impression of the word is "Windows cannot print due to a problem with the installation of the current printer" have uninstalled and reinstalled all printers in many times. Removed the Lexmark 1300 in the registry and reinstalled. No change. Ran sfc/scannnow several times. Microsoft Fixit print detected no problems. Help, please.

  Hi Baccy138,

  See the methods mentioned below and check:
  Diagnose and automatically fix the Windows USB problems
  http://support.Microsoft.com/mats/Windows_USB_diagnostics/
   
  Try to download and update the drivers manually from this site:
  http://support.Lexmark.com/index?segment=support&UserLocale=en_US&locale=en&ProductCode=LEXMARK_Z1300&page=product&FromPage=null#1
  1. click on the above link and click the menu drop down and select Windows.
  2. Select the version of operating system like Windows 7 and check the bit as a result.
  3. Download complete drivers and install it.
   
  Hope this information helps.

• Color cartridge loaded in the black print cartridge slot and vice-versa - now cannot remove the

  Accidentally, I loaded the new color and black cartridges in the wrong slots, and now I can't delete them.  How can I get them without breaking the printer?

  If you have a spare cartridge you can look and see a small crest on the top of the cartridge near the front.  This is the part that is stuck.  Using a blunt knife or the handle of a spoon to gently release the cartridge down a little should allow the cartridges to be released.

• Is it ok to remove the old Windows updates as I have many of them take a lot of disk space?

  I have several updates of microsoft for a few years. I am auto update, but all the old updates are still there. Is it necessary to keep or to delete to free up space. I get warnings that the computer is low on virtual memory.

  original title: is it OK to remove the old windows updates as I have many of them taking place?

  Virtual memory is used only when your physical memory has been exhausted.  This happens usually either when you have not restarted recently, or when you have too many programs running at the same time.  I suggest you reboot at least once a week and if it continues to happen, a purchase more RAM.

• When I save a PowerPoint document to PDF format, the images become white boxes or have lines around them.

  When I save a PowerPoint document to PDF format, the images become white boxes or have lines around them.  I was using Adobe 9 Pro, just upgraded to Adobe Pro XI and he always does.  I have other people to convert the same file in PDF format and it works fine so I know it isn't the Power Point file, there must be a setting in my Adobe.  Any suggestions?

  Hello

  Could you please update on the operating system you are working on?

  Is - this windows or Mac?

  Also an update on the version of Ms Office installed on your system.

  Do you feel it work with all the PDF' or a specific?

  If you are using windows, try to repair Acrobat once and then see if that solves the problem.

  Also, check the latest updates installed on your computer.

  Launch Acrobat > navigate to help > check for updates.

  Please, try the two steps and see if that fixes the problem.

  Concerning

  Sukrit diallo

• We installed HP60XL cartridges in our Photoshop D110 printer and make the message "Print cartridg.

  you are missing or not detected. The problem is that we do not seem to remove them either. They're stuck. Any suggestions?

  scantine wrote:

  He said that lie in the right slots.

  Here is a link to a statement emptyo and information on the installation of the cartridges.

  Ask husband to watch. He might see something that jogging his memory. (he forgot to remove the tape Strip?) This would make certainly difficult to remove and would disable the contact with the firmware of the printer.

  The cartridges are normally quite simple to remove and install. The only other thing I can suggest is to take in a PC shop or to have someone who is well informed to take a peek.

  Best regards

  ERICO

• There is ink in the black print cartridge, but he refuses to print a doc of W b

  I used to be able to print in black and white, even if a color cartridge is empty. I had several relocations of operating system, which means all new drivers I got after the initial installation is long gone.

  Is there a new driver that will run on the print command to the printer that will allow me to print in one color (or n/b) provided ink in this cartridge regardless of the quantities in the other cartridges?

  Please read this post then provide some details.  What printer model? What operating system?  There the error messages on the computer screen or the printer?

  HP and other printer manufacturers have technology another printer for different needs.

  • Some have integrated into the ink cartridges print heads.  These printers can print generally with one or more of the colors completely empty, or even with color or black cartridges (but not both) removed. The Deskjet 6980 series is an example.
  • Other printers have separate replaceable printheads and inks.  An example would be the Officejet 7110 printer.  In these printers print head can be replaced if they are damaged by running the printhead with colors off.  Some of these printers allow printing with a color, the other will not.  If the printer is run without ink in one or several colours, the printer may be damaged, but the user may be able to recover without having to send to the printer for the service.
  • Other printers have permanent print heads.  To run only those without little ink in all colours would risk causing damage to the print head because of clogs, air ingested in the printhead or grilled printhead resistances of shooting. The Photosmart 3310 series is an example of this type of printer. For printers with fixed print heads that could require the service to get the printer to print properly again when the ink is finally replaced.

  The document described here how the ink is used.  The document is written for inkjet printers HP the same principles apply to printers inkjet from other manufacturers.

• Printing CB436A cartridge: Life of the Laserjet print cartridge

  I just bought a HP Laserjet (36A or CB436a) print cartridge. In the box, there is a code (7L16M3BK) and a date (20100422). Before to open the box, I would like to know if this cartridge tonner is still ok for use. Seems to me that he is too old. Can I use it?

  Hi @Prof_Miranda ,

  I read your post and see that you would like to know if the toner will always be good, even if the date is showing 20100422. I'd love to help you.

  You should be able to continue to use the toner, if you have problems with it, contact HP.

  LaserJet provides warranty information Date of manufacture on the packaging.

  The manufacturing date on the box of toner cartridge is intended for HP internal processes and may be required to comply with regulatory standards in some countries. The manufacturing date is not an expiration or the date 'use before '. There is no expiry date for the use of HP ink cartridges. This information has been provided by this document from HP:

  HP LaserJet and Color LaserJet - print cartridges print cartridges HP LaserJet and imaging drums limited warranty statement.

  Here's the number 800-474-6836 technical support if you need help. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Good day!
  Thank you.

• Get the error that the my printer cartridge is incorrect.

  Original title: printer does not print

  I have an error message on my printer tells me I have a cartridge incorect and the message also said the cartridge in the right store not supported.

  I took the cleaned cartridge, it is always impossible to use my printer.i always use the correct cartridges I had these ones a few weeks and have been using them without any problem.

  It is not a Windows problem.

  If you went to the support section of the website for your printer of mystery and searched your all also unrevealed error message, you will find probably the printer manufacturer's advice would be to buy a new ink cartridge "authentic".

  For some printers, you can also find advice on cleaning the contacts in the printer (in addition to cleaning the ink cartridge).

  If you would like that I (or anyone else here) to search for these notices, please specify the brand and model of your printer, and the full text of all error messages, without paraphrasing.

• HP1515: MAC: unable to print with the black print cartridge only

  I would like to print the document with colors black and white. There are two options of color paper Type/quality. I tried to use the black cartridge grayscale mode only. However, only the white paper printed.

  I checked the supply level of ink that are in good condition (they are in any case the new cartridge).

  I also tried the high quality grayscale Mode. Things have been printed, but the result was unsatisfactory because of the color of melted from the police. The color of the police were too light being visible.

  What I can do to make sure only black and white for printing. No gray color is fine.

  Hey @yy1992,

  Welcome to the Forum from HP Support.

  I see you have a problem with print quality with the all-in-one printer HP Deskjet Ink Advantage 1515. I would like to help.

  The printer makes a decent quality copy from the front panel?

  I recommend you try two Solution in this article from HP. It is oriented towards users of Mavericks, but it should be pretty close to what you see on your Mac. Note that you can run the utility of cleaning printheads up to three times if you do not see a clear improvement immediately.

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support. Have a great day!

• Message "install the black print cartridge.

  I installed my new LaserJet Pro M127fn MFP printer.  However, even if I have the cartridge properly into the printer, the above message keeps appearing.  I tried a hard reboot several times, but the message continues to appear, and I'm unable to print.   What causes this problem?

  There could be some left on the toner packaging. Please try the steps outlined in this guide below, if all goes well he will clear the error

  Toner blinking or 'Install black print cartridge' Message is displayed on the control panel

  If this does not work, and given that the printer is brand new, you can also contact HP in North America at 1-800-474-6836 support or find the local for your country here phone number: http://welcome.hp.com/country/w1/en/support.html please look for the category 'technical support after you buy '.