Installation on Fedora 18 Canon MF4150

Similar Questions

• USB printer (Canon MF4150) is not recognized. Please help. __

  USB printer (Canon MF4150) is not recognized.  Help, please.
  What I tried:
  remove the printer
  Uninstall and reinstall the printer drivers
  printer plugged into every usb port, all working with other equipment
  plugged the printer with a different usb cable.
  stop, and then turn on the printer.

  Thanks in advance.

  Hello murrcat,

  Thank you for visiting the Microsoft answers community.

  To ensure that the procedure for this particular model is followed during the installation, please take a look at this .pdf of Cannon under the install/uninstall software.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to install the driver Windows 7 for my Canon MF4150 USB printer and scanner-worked in XP

  Original title: Windows 7 x 64 Windows printer problems is not able to resolve

  The scanner and my Canon MF4150 USB printer was working fine with my Windows XP computer.

  I got a new computer with Windows 7 x 64 OS and I can't get the printer to work.

  I downloaded the printer driver specified for Windows 7 x 64.

  The installation program is not accepted as I get a message that the resource file are not available.

  I then added the printer manually without success.

  The strange thing is that it shows in devices and printers but nothing prints.

  Initially, it has the usual green check that the default printer then becomes a warning sign yellow when I try to print.

  Right-click on the printer and select "Printer properties" and select "Canon MF4100 series UFRII LT" in the SUP menu if it exists, this name may be different in your machine. After the Properties window shows tab select the 'Port '. change the port to another USB port (the one that the printer is connected to), and then apply the changes. Your problem should be solved.

  I hope this helps

• After the installation of El Capitan (Canon 4400F) scanner my driver fails

  After the installation of El Capitan (Canon 4400F) scanner my driver fails. Now it's a 6 lb paper weight. Tried to reinstall the Canon software and downlading new from Canon, but nothing.

  First contact Canon for a possible upgrade.

  Then try to use the printers and Scanners pane in the system preferences application to see if it will recognize your scanner. Many current scanners is recognized and you can scan with the application overview.

  If none of these help to look into Hamrick VueScan software. I use Vuewscan with my is further supported the scanner Nikon 4000ED.

  http://www.Hamrick.com

• After the installation of new original canon cartridge pg40 my canon printer cannot recognize ink

  After the installation of new original canon pg40 cartridge my printer canon may not recognisd ink

  Hi Jeet,

  1. What is the model number of your printer?

  2. you receive messages or error codes?

  You can check the following link and try to run the fixit and check.

  Diagnose and automatically fix problems printing and printer

  Alternatively, you can contact Canon for help.

  Support for Canon

• VMware fusion and installation of Fedora 14

  I use VMware fusion 3.1.1 on a new imac 27 "core quad 16 gig ram computer, and I am trting to install Fedora 14 as a virtual machine, using the fedora DVD i386 version.

  If I use the ISO image or a DVD image based that I get the same error came.

  Anaconda 14.22 of the fedora installation system running - please wait

  The following error was found during the analysis of the kickstart configuration file

  The following problem occurred on line 65 of the kickstart file:

  The article does not end by %% end.

  Does anyone know what I have to do--in terms of simple beginner - how to get setup to succeed?

  I reported on bugzilla

  those who say:

  Yes, vmware should start putting end % at the end of their kickstart files.

  This is a warning for the last two years, four or five versions of Fedora.

  and a version of RHEL.  It is now an error.

  So is this a case of Vmware does not solve a known problem?

  I would like to know if there is a fix I can do.

  Thank you

  sysprobs wrote:

  Yes, easy install does not work in Fedora 14 with the final product of VMware.

  I don't know that you would have downloaded correct 32 bit or 64 bit versions.

  In addition, install VMware tools is the problem here, in any case I succuessfully installed using method.

  VMware Tools on Fedora 14

  Another way to get everything working in an installation of Fedora 14 is to start here: http://download.fedoraproject.org/pub/fedora/linux/releases/14/Fedora/i386/iso/Fedora-14-i386-DVD.iso which is to halfway down the page here: http://fedoraproject.org/en/get-fedora-options#formats. You need to do a manual installation for easy install does not work. But the thing is that when you are offered the possibility of a customized installation that chosen, then install everything listed in the developer section. I suspect only a couple offered packages are needed, but not being is not an expert, I don't know which ones to Linux. However, install all packages provide what the installer seek the end of the installation tools and everything I tried works, including the shared folder.

• Installation of fedora Linux next to my window 7 (dual boot)

  Hello

  I am facing a problem while installing fedora on my computer windows laptop Z580 7.

  I had narrowed the C drive to get 100 GB of free unallocated space where I could install the linux os.but when installing, I am confronted to error: ERROR of PARTITIONING "could not allocate requested partitions: not enough free space on disk.»

  After going to some forums, I discovered the issue could be with limitation of the disk partition hard drive that is 4.

  computer laptop lenovo already have 4 partitions additional partitions.and for / and / home etc for linux, this problem occurs.

  Please advice me how I can solve this problem.

  Thank you

  What happens if I also remove the disk tool from lenovo (of course after a backup of DVD) and merge it with the C drive. This primary transmission of woud do it3 and I can then install linux?

  Hi all

  Thanks for the responces.

  I was able to install fedora 17 next to my win7 os.

  I had to remove the drive Lenovo (with installation for the drivers files) after a backup of DVD.

  However, these two days has been very difficult... and had a bad experience.

  I changed the configuration of grub and installed nvidia package(was_just_experimenting_ _ ).after, I did the restart.it just won't enter the linux system. Although Win 7 was very good.

  I am frustrated, lil being a novice and decided to reinstall linux by replacing the old linux.

  Yet once the curse of maximum 4 primary partition now comes in picture, whenver I tried using USB or Live CD

  He would show me errors. Then I felt that I had to delete the Win disk linux partition manager... thought tool.but. Overrride grub on the MBR could be a problem when I would have started to get into Win7, because he would have got deleted as well with the linux partition. I went to EasyBCD and used an option (I have no idea if it works or not. took the risk) and run the possibility of placing the win vista/7 start files on the MBR, (thinking that he could remove the replacement of GRUB).

  Then I rebooted and BAM. I was lost as soon as I saw the message failed to initialize. (I have no bootable Win7)

  But sometimes the rescue... A key recovery saved me in 15 minutes, he did recovery .and I could retrieve the settings to factory default, althogh I lost a part of the very important files.

  Then, I deleted the disk Win Manager linux partition and reinstalled again.

  now, the two systems operate correctly.

  Conclusion: 1 Linux can not be installed in a system with 4 primary partition already existing (I could be wrong here)

  2. its safe to remove drive lenovo (containing the driver set up files), once you have the back upward.

  3. you must avoid changing any configuration for grub bootloader (unless you are an expert)

  4. for my case, normal Live CD has failed. I had to create a live USB (way fedora live usb creator) and I had to

  delete files with the extension .efi (a person of some fedora forum suggested do), until I booted from it.

  She's the one

  Thank you

• drivers for Canon mf4150

  I have a new computer with Windows 7 and do not seem to be able to get the drivers for my Cannon mf4150. It should be auto install but when I plug it in it get an error that it didn't load correctly. Any help out there?

  There are Windows 7 driver here...

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_mf4150#overview

• installation of Fedora core 11 and fusion

  Hello

  I recently installed the update 3.0 to the fusion.  I downloaded 64-bit fedora 11 kernel and I am trying to configure a virtual machine.  I did merge the image on my desktop and selected "other linux 2.6 of the 64-bit kernel" (or whatever the exact wording is).  Then the installation program just hangs.  I see a single line that says "ISOLINUX 3.75 2009-04-16....  Any suggestions?  I actually burn a DVD for the installer to work?  Thank you

  D

  JSYK Fedora 11 (no basis and has not been since 6 kernel) is not supported under VMware Fusion 3 (VMware Fusion 3: operating systems supported).  That said, not taken in charge and it will work can be two different things, and while you can get it installed you can still have problems get VMware Tools installed and working properly.

  The fact that you're stuck at this stage of the boot process, I would check to see that the checksums for the ISO that you downloaded matches what is published. Take a look to: check your ISO download

  No you don't need not first burn it to optical media and I would not without first checking the amounts of control over ISO you downloaded if you choose to burn it.  BTW install directly from the ISO Image is much, much faster then optical media even read/write from the same drive.

• Scanner MF4150 Canon not recognized after November 18/19 Windows Update

  Canon MF4150 on Vista 32 I ran without any problems for over a year - until update last week of Windows. Built-in printer still works fine. But when I try to use the scanner, I get the MF Toolbox that he does not have to scan supported. System Restore puts everything back to normal, and there is no updated driver available. Can't do a system restore to every day, and I don't want to disable Windows Update. Any ideas please?

  In Re KB976470: see section «changes...» "of http://support.microsoft.com/kb/976098: If you do not reside in one of these time zones (i.e., Georgia or Greenland, as you live in Europe), you can keep it hidden. (I doubt that this update caused the problem).

  In re KB976470: If the 'window Date and time in Control Panel' never displays the error message "DST ends [Date out of range] 0:00...» the clock is not set to reflect this change", you can keep it hidden, too. (I doubt that this update caused the problem).

  In Re KB973688: If the Update for Windows Vista (KB954430) security is listed in Add/Remove Programs, it would be OK to keep it hidden. (KB973688 isn't a critical security update.)

  In Re KB973687: If you have never encountered situations where the recovery request cause a World Wide Web Consortium (W3C) Web server to block the well known definition of the Type of Document (DTD) file types [or you don't know what that means], it would be OK to keep it hidden. (KB973687 isn't a critical security update.)

  =======

  Note: It is best to keep the automatic updates on the "download updates but let me choose when to install them" option. This parameter is meaningful (i.e., updates will be downloaded but will not, install individually or in a group, without your approval).

  If you select the third parameter ("check for updates but let me choose... (''), no updates will be downloaded without your approval. However, the approved updates will be downloaded and installed automatically once you have approved them. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I stop firefox auto discovered printers on fedora?

  On Linux Fedora (19 & 20 at least, probably others) Firefox automatically detects printers connected to the network, completely independently of CUPS. The printer it finds for me is legitimate, but it does not install the drivers to make it work properly. If this printer is used, it will display gibberish; control of PDF language, sometimes total sometimes undesirable. It restores the right page and tons of paper waste.

  Thank you!

  Thank you.

  I found that avahi-daemon is the culprit. I just do a fresh install of Fedora 20. I have not configured all printers, and yet the printer 'bad' appeared in the list of printers in Firefox. After that I stopped avahi-daemon and avahi - daemon.socket, the printer went away.

  I also noticed with my installation of Fedora 19, bad printer went if I put my computer on a different subnet.

  So the next step is to understand how to configure avahi to not behave in this way when it runs.

  I appreciate your help.

  • • Post script *.

  I looked at what I could find on avahi, but seems not be one any affecting to ignore a particular host. However, after a survey, I found the right setting on my Lexmark E260DN to change. Under TCP/IP settings, there is a checkbox for "mDNS." The default value is on. Once I turned it off, that solved the problem, allowing me to reactivate the avahi on my computer safely. I had looked for something like this earlier, but missed, I was looking for things like 'Hello', "zeroconf", "DNS - SD" or something similar.

• Try to have a dual-boot with Windows 10 & FEDORA

  Hello
  I have 10 Windows installed. I want to have a dual-boot installation of Fedora 23.
  I created a partition. I installed Fdora. Everything seemed fine, but my system keeps on startup on Windows 10. I never get a dual-boot menu.
  No idea where this can be configured?

  I did or tried things:
  -updated my bios to the latest version
  -looked for installation of UEFI, I can't find where I can add the grub Fedora (something) any idea?
  -changed the quick boot setting in the Windows registry to 0
  -tried many things in the BIOS but no luck

  Thank you
  Damien

  Hello

  Please tell me a little background here.
  -C' was a unit of 10 Windows factory installed? Means to come with factory Win10? If not, this operating system has been installed on the factory unit? 7, 8, 8.1?
  -I guess that the aircraft had Win10 and you then added 23 Fedora. How did you go about to achieve this? Did you use the installer to resize a partition first? Which partition?
  -Don't you let Installer automatically configured partitions or did you do it manually?

  I tried it myself and was only partially successful, but got a quite different result that you did.
  Win10 has been installed at the factory.
  I resized the partition system (c) allow about 100 GB for Fedora 23.
  Let the installer automatically created the partition in that space.
  Once installed, the unit can restart in GRUB2 (Please note: NO of Win10) and let me choose boot Fedora or Win10.
  The boot of Win10 was however broken and I had to take a few steps of dignostic before Win10 has finally started ok (as did 23 Fedora of course).

  Then when everything was done, the device starts in GRUB2 and let me choose between Fedora and Win10.

  Tom BR

• Installation of XP is no longer recognized by the Setup disk after Format of Partition

  Hey all,.

  In short, my problem is that I have an installation of XP (home or professional) intact windows, but after deleting another partition, the computer does not start to it. My question is what are all the things needed for a computer can be started on the windows partition - even just to the loading screen (which files are needed on the partition, for example boot.ini file, which must be in the MBR, how to mark a partition as bootable; etc.). Here is a description of exactly what has happened and what is the current situation:

  I was working on a friend's computer, and he asked me to delete the partition that it has not been used (D) and melt in his primary partition (C) where was the installation of Windows. I used a program called Easeus to format the partition for Windows let me to merge. The program asks for a restart, and then it is initialized to a screen where he deleted the partition, then restarted once again, probably to load Windows.

  That's where the trouble starts. Instead of windows, I have nothing else than a cursor flashing ("_") in the upper left of the screen. After 60 seconds, nothing was. I rebooted a couple of times, still no windows.

  The first thing I tried was to throw the disc to reinstall the window. I got to the screen configuration and supported on entry to choose a windows installation to repair, however he could not find one on the drive C (or D). I then tried to install Windows on drive D, hoping at least to be able to access the files on your computer with a parallel installation and then clean things later, but the installation struck a BSOD (sorry I don't have the message). The last thing I tried using the recovery console, but the only one installation of Windows that he found was on the D drive (I guess it was the remains of the failed installation that I had tried just because it contained only a few system files).

  So I still need an operating system to access the files on the C drive, so I did an installation of Fedora Linux (on a small new partition in drive D). I could check on the files and they were all intact, including the Windows system files. I could not find anything wrong with the partition, except for the apparent absence of a file boot.ini on drive C. I tried to add a boot.ini file by default (even though I wasn't sure exactly what should be in it). I can only assume that when my friend had the computer built with partition by a local technology company, they did the D drive partition bootable, but put the Windows files on the C drive. It makes no sense, but I can't find any other reason format another partition that windows would make it unbootable.

  The problem is, now, I have GRUB installed to Fedora. GRUB cannot boot directly on Windows, so he has to begin on an another bootloader that can. I think I have GRUB pointing to the right partition, but I get an error message. So, what I want to know from a point of view of Windows is everything necessary for a successful boot, assuming I can get GRUB to work on his end. What should a healthy Windows boot look - exactly, what should happen?

  The other option, of course, must do a fresh install of Windows on drive C (and hope for no BSOD more). I could put all the files on the partition of Fedora and move them back after the relocation. So what you think - is it worth a try even to save the current installation of Windows?

  Feel free to ask questions or for clarification. I have a limited capacity to test things, I have to wait until I can get to his computer. Your help is very appreciated!

  -Thomas

  Hey thanks for the reply guys. Just for the record, I posted that thread on WindowsForums, and I got good results. If anyone is looking for an answer, here's the link to the thread. Sorry, I should have scored as before, but thanks to you both for your help!

  http://windowsforums.org/topic/5097-XP-installation-no-longer-recognized-after-formatting-other-partition/page__pid__16201

  -Thomas

• printer driver for canon lbp 1260 with USB-parallel connection (W7 Home premium 64 b)

  Default W7 to IEEE-1284 controller installation when LBP1260 is connected in parallel - usb (no available on computer parallel port) cable.
  Properties of the IEEE-1284 controller: functions of the device: USB printing support
  device type: bus controller USB (Microsoft, 21/06/2006, 6.1.7600.16385) "best device driver software".
  Impossible for the downloaded installed printer driver or transfer to computer XP driver.

  The HP Laserjet 4 printer driver installation (or 4 +).   Canon engine has been used in LJ4 series and the pilot pushes the LBP1260 perfectly and has since Windows 98 :) sure to allocate the (virtual) USB port to the printer, if you don't when you installed the driver.

• Canon Power shot s230 camera need driver camera online

  My computer has windows7 and does not recognize my Canon Power Shot s230 camoera. and can not read the installation cd either.  Canon no longer supports this camera so I'm hoping somene can help me to find the driver online, I always love this picture. Thank you

  Hello

  1 are there any changes on the computer?
  2. were you able to use the camera on the computer before?
  3. do you receive any error messages?

  Method 1:
  I suggest you try to download software or firmware for Canon Powershot S230 and check if it helps.

  http://www.USA.Canon.com/Cusa/support/consumer/digital_cameras/powershot_s_series/powershot_s230#DriversAndSoftware

  Method 2:
  Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.
  Follow the link below a convenience store opened.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  For more information about installing the latest driver, see the link below.

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this information is useful.