installation package software.msi BPD

Similar Questions

• Computer continues to try to install the backup. He asked me to find a path to a folder containing the installation package 'SpareBackup.msi' I can't find it anywhere on my computer.

  SpareBackup.msi installation package

  Computer MT continues to try to run a backup. He asked me to find a path to a folder containing the installation package 'SpareBackup.msi' I can't find it anywhere on my computer. I keep getting is not available.

  Hello

  1. when exactly you get invites him to install SpareBackup.msi?

  Method 1:

  I recommend you perform the clean boot that this issue could be caused by some third party software.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  You can also download and run a full scan of the system using the Microsoft Safety Scanner and check if the problem is caused by a Virus/Malware.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• "The feature you are trying to use is on a network containing the installation package"status.msi"in the box below.

  Original title: the status message appears on the start page.

  Message that appears at startup to the top: the component you are trying to use is on a network containing the installation package "status.msi" in the box below.  Click OK to try again or enter a different path to the folder containing the installation package "status.msi" in the box below.

  Hello

  Have a few questions that might help me to analyze the cause of the issue you're having with your computer.

  ·         When you get the message that says, "Status.msi file missing?

  ·         You have an installed HP printer?

  ·         You made any hardware or software changes the computer recently?

  Method 1:

  You can try to clean boot and check if you still get the error message.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the article.

  Method 2:

  If the problem persists, you can try to restore the system on your computer and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Hope this helps

• How can I remove the 'State' that wants an installation package "status.msi" I do not have?

  This laptop does not accept even in SP3. It doesn't have enough RAM for Win7.   I got rid of bad bits with chkdsk.  Status tries to install all the time & I can't find how to remove it.

  Hello
  I've got SP3 now after 2-3 attempts.  (Just 'failed to install.")
  And for the status "the component you are trying to install is on a CD or another removable disk that is not available."
   
  "Insert the diskette in the State, and then click OK.   Use Source 1. "The next window"cannot find an installation package for the product status.  Again the installation again using a valid copy of the installation package "status.msi." "
   
  The link with Microsoft wasn't working, so I checked on Google and found this annoying file is a file of HP printer so I deleted the HP printer program, which got rid of the file.  It seems, I then have to re - install the program without checking the update box, I'll try it when I have the time.
  Thanks a lot for your help.

• Error "the component you are trying to use is on a network resource that is unavailable, click ok to try again or enter a different path to the folder containing the installation package ' status.msi.»

  What is an installation package "status.msi", it doesn't let me access my command to scan on my HP officejetJ5780 all-in-one.  It indicates that the component you are trying to use is on a network resource that is unavailable, click ok to try again or enter a different path to the folder containing the installation package ' status.msi.  It's also prevents me to access my backup disk.

  Original title: status.msi?

  I restored my computer to a period of time, two weeks earlier and which seem to fix the problem, somehow.   Thank you

• Looking for the installation package "AcroPro.msi" - my computer says it is already installed, but I can't find or enforce

  I am looking for the installation package 'AcroPro.msi ".  I had already installed Acrobat Pro XI, but he seems to have disappeared, although the computer says it is installed.  Where can I find this installation package?

  I use Acrobat Pro to save documents as pdf files, mainly tax statements and the documents provided to clients

  Hi Billström,

  What was the Acrobat version installed on your machine.

  You can visit this link to download the version of Acrobat you have: http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  If you have windows, click Start > in the search box, type Adobe Acrobat and wait and see if you have Acrobat that are listed there, or you can visit \Adobe\Acrobat 11.0\Acrobat C:\Program Files (x 86) and search for "Acrobat.exe" or "Acrobat". He should be here if you have already installed Acrobat.

  Kind regards

  Ajlan Huda.

• 2732 (Installation Package "status msi" error message

  Hello:
  I bought a HP Touch Smart computer all-in-one is August 2009. Since that time I got the error message 2732 every time that the computer starts. I just end the process so that I can continue to work.  The message also States that the "necessary resources come from a network and are not available.... "The file that the research process is not available. It's a Windows installation package he seeks. When I go to the MSI of State and try to "Uninstall" so that the process does not start when I turn on the computer, I get a message that says: it is not installed.  It's more annoying than anything, but I don't want no problems later.
  Help, please!  Thank you

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/update-failed-looking-for-status-MSI/m-p/77525

  Above is an example of one of the error messages typical of HP that can be displayed.

  You will find that the error is related to the HP software.

  Contact HP:

  http://welcome.HP.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner

• An installation package for the software aio 02 of the ps product cannot be found. How to find or install the installation package?

  Windows Vista Ultimate 32-bit

  Message appears at the beginning upward.

  Accompanied by msg: try installtion again using a valid copy of the installation package 'ps_aio_02_software.msi '.

  and: the component you are trying to use is on a network resource is unavailable.

  and: click OK to try again or enter a different path to the folder containing the installation package 'ps_aio_02_software.msi '.

  I don't know what function I am using.

  Unfortunately, I am not very computer.

  Any help would be appreciated!

  Thanks in advance

  Joe

  Hello

  It seems to be to do with the HP software.

  http://h30434.www3.HP.com/T5/other-desktop-PC-questions/PS-AIO-02-software-MSI-error-on-boot-up/TD-p/2218373

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/uninstalled-a-program-I-shouldn-t-have-Windows-Vista/TD-p/219859

  And this HP link explains different .msi errors:

  "" The component you are trying to use is on a disk that is not available"or a similar Message appears on the computer in Windows.

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01631295

  See you soon.

• Improved LabVIEW 8 to 2013 and VI asked now to find the installation package for Run-Time Engine 7.0

  I recently installed LabVIEW 2013 on a computer (running Windows XP 32-bit).  The machine has also of LabVIEW 8 is installed, which is what I used before the upgrade.  I opened a VI has been created in LV8 and then saved it and all its subVIs in LV2013.  Now when I open the VI in LV2013 and try to run it, a window opens asking me to find the installation package 'lvruntimeeng.msi' for LabVIEW Run-Time Engine 7.0.  If I cancel this dialog box, and the subsequent message, indicating that the installion files were not, the VI appears (at least of the initial inspection) to function normally.

  I have closed LabVIEW, downloaded Run-Time Engine 7.0 on the site of NOR and tried to install it, but I received a message saying that it is already installed (as I had suspected).  How can I determine what part of the VI and/or its subVIs tries to make use of Run-Time Engine 7.0?  If not, how can I get LabVIEW to use instead the Run-Time Engine 2013 that was installed when I upgraded to LabVIEW 2013?

  Bob_Schor wrote:

  You run your VI of a project?  If so, you can watch the dependencies and get an idea of what live "in charge", you might have.  There may be "something old" in your code in LabVIEW 8, which was replaced in 2013, but ' plane still around "-If you can identify it, you can probably replace it with its"more modern"equivalent

  If you do not have the VI in a project, you can simply open LabVIEW, create a blank project and add your first level VI.  If all of your relevant screws are in a single folder, add the entire folder.  Now look in the dependencies.

  BS

  Yes, I run the VI from within a project of LV.  After some more research in the knowledge base OR I could solve the problem by using the following procedure:

  1. use the measurement and Automation Explorer to uninstall Run-Time Engine 7.0

  2. restart the PC

  3. open the project, close the project by choosing "save all".

  4. restart the PC

  5 reinstall the Run-Time Engine 7.0 using a file downloaded from ni.com

  6. restart the PC

  7. open the project, close the project by choosing "save all".

  8. open the project and run the VI.  No more messages on LabVIEW, trying to find the Run-Time Engine 7.0.

• Could not find an installation package for the product TrayApp. Try installation using a valid copy of the installation package for TrayApp.msi.

  Yesterday I uninstall a program, the Zynga toolbar and which has not, I lost a google toolbar. I then tried to perform a restore, and that's when I started getting the TrayApp message. Also, I tried to do a restore on my external hard drive device, and that did not help either. The date on the external hard drive was 18/02/2011.

  The google toolbar is active it is not displayed any longer.

  Hello

  "a valid copy of the installation package for TrayApp.msi.

  This is normally a problem with your HP printing software

  Uninstall and reinstall the printer

  and try this

  http://www.ehow.com/how_5269744_remove-trayappmsi.html

  Contact HP support

  http://welcome.HP.com/country/us/en/contact_us.html

  HP support forums

  http://h30434.www3.HP.com/

  follow these steps

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• AMRT.msi installation package

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:AMRT.msi installation package. went to install the upgrade for the security of ca and some how it lost in the process and did a restore and still can not find this file.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://CA.intelliresponse.com/ISS/index.jsp?RequestType=NormalRequest&interfaceID=10&source=4&ID=1614&question=what+is+AMRT.msi

• Error code: 0 x 800700002, does not have support for the installation package ' Vista SP2 MBR Update, installing the Zune software for windows phone 7

  Original title: could not find the media to the installation package ' update of Vista SP2 MBR

  I need to install the Zune software to my windows phone 7 and I get this error message: cannot find media for error code installation package 'Vista SP2 Update MBR' 0 x 800700002. Please tell us what to do.

  Hi PamelaMaassen,

  You can read the following article and check if it helps:

  A required component cannot be installed when you try to install the Zune software

  http://support.Microsoft.com/kb/944938

  If you're still having problems, then post your query in the connection of support Zune for more assistance:

  http://answers.Microsoft.com/en-us/Zune.aspx#tab=1

  Hope this information is useful.

• On startup, I get the message: Please wait while Wilndows configure installation package 'Destination' Destinations.msi.

  Original title: Windows Installer

  Whenever I reboot Windows Vista Home Premium, I get the following events:

  Windows Installer opens and then I get the following

  Please wait while Wilndows configure installation package 'Destination' Destinations.msi.  I have no idea of what is Destinations.msi and that you have never installed such a program.  He asks me to put in the cd disk that comes with the program.

  Any suggestions on how to stop this very annoying interference every time I restart my computer.

  Thanks in advance for your suggestions and help.  HankL

  Hello
   
  Method 1.
  Let us run Disk Cleanup and then reregister the Windows Installer service and check.
  Stage I.
  a. open Disk Cleanup by clicking the Start button. In the search box, type and then disk cleanup in the list of results, click Disk Cleanup.
  b. in the drives list, click the drive you want to clean, and then click OK.
  (c) in the dialog box disk cleanup, on the Disk Cleanup tab, select the check boxes for the types of files that you want to remove, and then click OK.
  d. in the message that appears, click on delete files.
  For more information see the link below:
  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup
  
  Stage II.
  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:
  a. in the menu 'Start', click on ' execute:.»
  b. in the "Open" box type "msiexec /unreg" and then press ENTER.
  c. on the menu 'Start', click 'run '.
  d. in the "Open" box type "msiexec/regserver" and then press ENTER.
   
  Method 2.
  At startup, there is a request pending to be updated or installed. We can perform the boot minimum troubleshooting to find this application.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Works8.msi error on installation disc is not considered to be valid installation package

  Original title: REMOVE MICROSOFT WORKS 8.05.0818 WON'T FILE WORKS8. MSI ON THE INSTALLATION AS A VALID INSTALLATION PACKAGE DISC

  What is my next step?

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.works.win&cat=en_us_9804e2ac-c762-44C9-9c6f-90e45f32d772&lang=en&CR=us

  Discussions in microsoft.public.works.win

  You will be easier with your question work when repost you it in the above works Newsgroup.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 Setup fails with «the installation package cannot be opened...» »

  We receive the error message "this installation package could not be opened.  Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package. "the installation of accessdatabasedriver.exe (database driver Access 2010).

  I tried to log in as a local administrator without success.

  I ran the diagnostics for Windows install and it says that nothing is wrong.

  I tried to disable the anti-virus software and scan for malicious software without success.

  Any ideas?

  The tracking information is stored in the temp folder:

  = Registration began: 14/07/2015-14:57:24 Build type: SHIP UNICODE 5.00.7601.00 appeal process: C:\Windows\SysWOW64\msiexec.exe =.
  MSI (c) (0C: 88) [14:57:24:286]: established police.  Charset: Req = 0, Ret = 0, fonts: Req = MS Shell Dlg, Ret = MS Shell Dlg

  MSI (c) (0C: 88) [14:57:24:286]: established police.  Charset: Req = 0, Ret = 0, fonts: Req = MS Shell Dlg, Ret = MS Shell Dlg

  MSI (c) (0C: 4) [14:57:24:301]: Resetting cached policy values
  MSI (c) (0C: 4) [14:57:24:301]: value of strategy Machine 'Debug' is 0
  MSI (c) (0C: 4) [14:57:24:301]: * RunEngine:
  Product: AceRedist.msi
  Action:
  Command line:
  MSI (c) (0C: 4) [14:57:24:301]: value of strategy Machine 'DisableUserInstalls' is 0
  MSI (c) (0C: 4) [14:57:24:317]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3:2
  MSI (c) (0C: 4) [14:57:24:317]: Note: 1: 1324 2: Program Files (x 86) 3: 1
  MSI (c) (0C: 4) [14:57:24:317]: MainEngineThread returns 2
  = Recording stopped: 14/07/2015-14:57:24 =.

  Found the problem and the solution.

  I found that all msi packages would fail.  I tried to install another package as a .exe and received the error message: "the folder path ' program files (x 86)" contains an invalid character.

  This brings me to wonder about the long file name support.  After research, I found the registry key 'Win31FileSystem' has been set to 1.  This system was originally setup to be able to save files on a computer embedded Windows 3.1 (don't ask). It turns out that having this disables running or is not compatible with the appointment of "Program Files" (x 86)  Definition of this registry key to 0 and reboot solves the problem of msi.

  Thank you

  John