Current firmware for Dell TL2000

Similar Questions

• Latest firmware for Dell & KM714 universal receiver

  Hello, can someone tell me what are the latest versions of the firmware for Dell universal receiver and (as applicable) KM714 wireless keyboard & mouse?

  Drivers download pages are a mess and it's hard to find an appropriate update file or the game with the system (e.g. KM714 pilots are officially not available for Win10).

  Here's my current status of FW:

  

  Here is the link to July 2016 Driver Update: http://dell.to/2eQMR8n

  and for KM714 & WM514 Dell Update universal receiver:

  http://Dell.to/2eQNSxe

• Update Firmware in Dell Equal Logic PS4100E

  Hello! I have a Bay Dell equal logic PS 4100E. I need to update its firmware. Currently Im running Firmware V5.1.1. I read this: "Update Firmware for Dell EqualLogic PS Series arrays and FS Series storage facilities" but I need confirmation before doing the actual upgrade.

  Since Im running V5.1.1 now, I need to:

  (1) download and install the firmware V5.2.11

  (2) download and install the firmware V6.0.8

  (3) download and install the firmware V7.0.2

  Am I wrong? Could someone confirm that its okay? Soon ;)

  To get to v7.x v5.1.1 you only need to do two updates, first upgrade to 6.0.x (the most recent, 6.0.8).  The document upgrade firmware for v6.0.8 clearly shows that you can go to 6.0.x 5.1.x and no need to do the 5.2.11 upgrade).

  Once on the last version 6.0.8 (and the table has been restarted - very important to do this step!), you can go to the latest version of 7.x.

  (Note that the release notes for 7.x is a bit of confusion on this and need to be revised to show the path of 5.1 to 7 a little better)

  -joe

• Update firmware on Dell Powerconnect 6248P battery

  Hello

  I need to update the firmware on the switches on my stack, the stack consists of 3 all current 6248P to run version firmware 3.2.1.3 Powerconnect switches.

  I plan to stack in a 4 switch that is running 3.3.1.10 so I need to update my existing carpet before doing this.

  I would like to use auto update and upgrade the firmware on the circuit breaker that will modernize, then the rest of the stack, but the issue I'm having, it's that the documentation Dell tells me to enable synchronization of the firmware using the command "start auto-copie-sw" in the cli, however appears not to exist at all?

  Can someone advise?

  Thank you

  Steve

  The documents listed here.

  www.Dell.com/.../pwcnt_stacking_switches.pdf

  Is a little outdated. Therefore, the listed order is more part of the 6200/CLI firmware. By default, the switch will try and push any updated firmware for the other switches in the stack, no need to run a command.

  See you soon.

• Unable to update firmware for the PERC 5 controller / i on PE1950

  We have 6 PE1950 server with SAS PERC 5 / i integrated RAID controllers. Dell OpenManage complains about being obsolete PERC firmware. 2 servers I currently have running, firmware 5.2.1 - 0062 and 5.1.1 - 0040. I downloaded the latest version of 5.2.2 - 0072. I tried the update by the Windows package and who did not, and he complain about the OS being too recent. A server is Windows Server 2008 R2 and the other Windows Server R2 2012. So, I created a BACK USB key with Dell hard drive files and run update.bat. Who failed on both servers with the following errors:

  Firmware doesn't have flash. Stop!

  Failed to update Firmware for controller 0

  The process of updating of the firmware of the controller does not have!

  Both servers had the exact same mistakes as described above. Ideas on how I can get the firmware update successfully? I checked the package I downloaded is for the PERC 5 / I integrated.

  It's here (if that will allow me to post a link):

  www.dell.com/.../DriversDetails

  Hello

  Try this updated version and see if it works. He said that it was for the 1950s.

• Firmware for DVR-K12TBS

  Hello

  y at - it ja new Firmware for the DVR-K12TBS from Toshiba DVD burner? (Model No. PA3358E-1DV5)

  My current Firmware is 1.15 (09/2004)
  It is very old and there are several DVD + r that I can burn only at low speed.

  Thank you.

  Thomas J.

  Hello

  Well, it would be very interesting to know what unit you have.
  However, you can consult this Toshiba download page:
  http://www.Toshiba-Europe.com/storage/Index_home.asp?nav=Hom&page=Hom&frame=home&model=x

  or this one:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good bye

• Re: Satellite A100-955: I need a firmware for Mat * a DVD - RAM UJ - 841S

  Hello!

  I have a Satellite A100-955, and I need a firmware for my CD/DVD drive.
  It works fine and bad in different times.
  My current version is 1.60. I can't find an update anywhere! Or at least the same firmware...

  I can't find it on CPR1, I can't find it on the Web from Panasonic website. Help!

  Hello

  I checked the Toshiba page and there is no updated firmware for this CURIOUS.
  Usually if you have some problems with reading or writing to the disks, then this means that the STRANGE beginning of malfunctions and no update firmware could help.
  Perhaps the drive's laser lens is not ok this happens after a long period of use.

  Maybe you can try to clean the lens with the help of alcohol and lint.

  If that does not help, then you should try different discs from different manufacturers
  And the last option could be replacement drive.

• Firmware for the F348XP - N77 - 23 Nexus module problems

  H,

  I hope you had great Christmas time! I am currently working on the new Nexus lab, and I have a challenge.

  I try to get 1/10 Gbit / s Ethernet Module running. Do you know where to find firmware for this module and how to set the variable initialization for her? What I get so far:

  introduce the module:

  Status of Module Type mod Ports model
  --- ----- ----------------------------------- ------------------ ----------
  1 48 1/10 Gbit / s Ethernet Module N77 - F348XP - 23 ok
  2 48 1/10 Gbit / s Ethernet Module N77 - F348XP - 23 powered-dn! This one, with that I'll have the problem
  3 0 active supervisor Module-2 N77-SUP2E *.
  4 0 supervisor Module-2 N77-SUP2E ha-standby

  When I try to turn it on by entering

  (config) # No module poweroff 2

  I'm more about newspapers:

  2015 Dec 16 00:38:23 % xxx platform-2-MOD_DETECT: Module detected 2 (serial number JAE19290A6J) Type of Module-1/10 Gbps Ethernet Module model N77-F348XP-23
  2015 Dec 16 00:38:23 % xxx platform-2-MOD_PWRUP: Module 2 under voltage (serial number JAE19290A6J)
  2015 Dec 16 00:38:23 % xxx platform - 5 - module MOD_STATUS: Module 2 - current situation is MOD_STATUS_POWERED_UP
  2015 Dec 16 00:40:02 xxx % BIOS_DAEMON-SLOT2-5-BIOS_DAEMON_LC_PRI_BOOT: System started from the main BIOS Flash
  2015 Dec 16 00:40:05 xxx % FW_APP-SLOT2-2-FIRMWARE_IMAGE_LOAD_ERROR: error extraction and loading Firmware: firmware Flash and software images are bad
  2015 Dec 16 00:40:06 xxx % MODULE-2-MOD_FAIL: initialization of the module 2 (serial number: JAE19290A6J) failed
  2015 Dec 16 00:40:06 xxx last message repeated 1 time
  2015 Dec 16 00:40:06 xxx % PLATFORM-2-MOD_PWRDN: Module 2 power off (serial number JAE19290A6J)
  2015 Dec 16 00:40:06 xxx % PLATFORM-5-module MOD_STATUS: Module 2 - current situation is MOD_STATUS_CONFIGPOWERED_DOWN
  2015 Dec 16 00:40:06 xxx % PLATFORM-5-module MOD_STATUS: Module 2 - current situation is MOD_STATUS_POWERED_DOWN

  I take the problem is with the firmware, but I can't find the path to it. It there is no defined variable initialization is module 1, or 2, but module 1 started without problem.

  XXX # display the start module 1
  No set variable initialization module
  XXX # display the start module 2
  No set variable initialization module

  I can see the bin files under
  XXX # cd bootflash://module-4/
  bootflash://module-4/20150808_221923_poap_7580_init.log bootflash://module-4/vdc_3
  bootflash://module-4/20151211_010151_poap_8037_init.log bootflash://module-4/vdc_4
  bootflash://module-4/20151211_015441_poap_7723_init.log bootflash://module-4/vdc_5
  bootflash://module-4/lost+found bootflash://module-4/vdc_6
  bootflash://module-4/N7700-S2-dk9.6.2.12.bin bootflash://module-4/vdc_7
  bootflash://module-4/N7700-S2-kickstart.6.2.12.bin bootflash://module-4/vdc_8
  bootflash://module-4/scripts bootflash://module-4/vdc_9
  bootflash://module-4/vdc_2

  but I'm not able to assign variable initialization module, I see 1 - sup and sup - 2 only

  XXX (config) # boot system bootflash://module-4/n7700-s2-dk9.6.2.12.bin?
  
  SUP-1 input sup-1 to set up the 1st sup
  SUP-2 input sup-2 to set up the 2nd sup

  I hope that you would be able to help!

  Happ new year as well! :)

  Hello

  Do you have these linecards at the same time? I see that module 1 is the same model and do not have any problems. Did you open a SR of TAC for the same thing? I saw some similar cases where these messages could be the result of a faulty hardware, but you can open a folder of TAC to continue the investigation.

  HTH,

  Wes

• How to get the firmware for rfgw1

  Hello experts,

  How can I access versions of firmware for the rfgw1?

  Kind regards

  Michael

  Hi Michael,

  03.10.08 is a proven version.  Many many sites around the world use this version even after two years or more.

  If you run 03.01.08 you do not use encryption of PowerKet which is available without external devices for the RFGW1.

  We also enabled the RFGW1 to run 96 channels with an appropriate license.

  Most of the releases in the course of the last two years have been for specialized applications usually associated with encryption or data.

  Today, most of the applications of WIS Launches 3.1.8 except for some very special cases.

  I would wait until mid-October for 6.1.0 release.  Once again this version will take the place / and integrate all previous features and several new features.

  If you have a specific problem with your current code that needs to be resolved immediately, please let me know.

  Thank you RON HANSON RFGW1 support [email protected] / * /

  If you wish to contact me directly by phone for specific questions or discussion please call me at the 678-277-1226.

• Latest firmware for Wyse S10?

  Latest firmware for Wyse S10?

  What is the latest firmware for the wise s10?
  and where can I download it?

  Thank you
  Sergey

  Firmware for CMO is not free and requires that you subscribe to the program of Software Maintenance for all your customers. This is true for a thin client currently in production. If your device is EOL (S10, R10L, etc.), then no other upgrade is available.

• WD5000H1U car has become a legacy product and we have no plans to create a firmware for compatibility with Windows 7. __

  I got this response from Western Digital on my old hard drive My Book Essential Extermal.

  Thank you for your response.

  Really, I apologize for the inconvenience that you are experiencing currently. Unfortunately, this disc became a product and we have no plans to create a firmware for compatibility with Windows 7.

  I hope that we have met your expectations today and that you are satisfied with our service. If you have any other questions, just reply to this email and we will be happy to help you further.

  Sincerely,
  Nestor V.
  Western Digital Service and support

  If you encounter any problems with your external hard drive, this could be the problem.

  Well, don't know how it happened, but it works.

  Last night I went on the Web site of WD and downloaded

  1 EssentialEliteFirmwareUpdaterv1.032_1.0.7.4
  2 WDSmartWare_Software_Updater_For_Windows_1_0_12

  After I did it, I unplugged all of my other drives and I tried everything again with the missing disk, but it still does not.

  This morning, I reconnected all of my readers, and he started to read the missing disk.

  The version of the driver file is now
  6.1.7600.16385(win7_rtm090713-1255)

  I'm not sure what did the trick, but maybe this will help someone out there.

  Good luck!

• best cable put in place for mac mini end of 2014 2.6 G 8ram graphics intel 1 to HD for dell p2725Q

  you want to plug end of 2014 2.6 mac mini 8ram for dell p2715Q which cable works best?

  A cable with a mini displayport on each end. The monitor has a mini displayport to entry and you plug the other end into one of the Mini Thunderbolt port.

  Note that your Mac will get 30 Hz to 4K

• Error message on the download of update of firmware for airport

  Get an error message when you try to download the update of firmware for the airport. Have disabled the Wi - Fi for all devices; powering down of the airport; MacBook connected to the router via a cable; access to Internet but the download update still gives an error. Any ideas on haw to get the update, or what is the problem? Thank you.

  The error message say, exactly? What version of Mac OS X you are running on this machine?

  For updates of the firmware to work, you must be connected to your device from the airport and connected to the Internet at the same time. If you have a situation where you have to disconnect from the Internet to connect to your airport device, it does not work, at least not for the first time, you have to download a firmware version for the same model of AirPort base station.

• restore the firmware for macbook pro 13 mid 2009

  Hi all! This is my first time using the support community so forgive me for any rudeness and English summary.

  I recently bought a used mid 2009 macbook pro 13 "with no disc on this subject, I installed a new empty 120 GB ssd drive.

  I asked a friend and he has downloaded and made me a usb bootable with osx on it (lion). I instaled the osx and got the macbook running successfully and it was perfect.

  I decide to update and went up el capitan wich sucessfully installed. After the update I tried it out, web navigation simple, when suddenly, out of nowhere the mac stop (much battery left and the led indicator to confirm) and has not started since... when I turn it on the led light flashes and it gives the s.o.s. beep (3 short beeps followed by 3 long beeps and then 3 short beeps) the optical drive made his usual looking noises of boot and the fan continues to spinning, I tried to remove the battery 10 minutes several times and nothing... I read a lot about the problems of ram tested with one stick at a time in the two slots and no improvement... bought a new pair of hynix 2 gb 1066 mhz pc3-8500 ddr3 sticks as recommended for this model and replaced the "old"... did nothing.

  I have no original discs just the macbook itself and the charger. Also tried to boot from the usb drive... not good... tried to start mode revovery... nothing that the black screen and a beep sounds.

  I did some research and read a looooot online and in discussions such as this apple and found it to be the sound warning for bad/corrupted efi rom (as opposed to the majority of people declaring it to be a ram issue) which needs to be restored or flashed... However, apple does not provide or at least I can't find a picture of recovery for my model cd special I know it's the macbook 5.1 (a1278 / emc2254). Is there any solution for this? Please help in some way that you can welcome suggestions!

  Thank you

  Then, you say at the end of your post, you say that it is a MacBook, but it is a MacBook Pro. Check which model you have.

  On the updates of the EFI and SMC firmware for Mac computers with Intel processor - https://support.apple.com/HT201518

  What to do with all these "beeps mean at the start? - http://forum.insanelymac.com/lofiversion/index.php/t62919.html

  Power on self-test beep definition - part 2 - http://support.apple.com/kb/HT1547 - old Macs

  Mac Power on Self Test RAM Intel processor error codes - http://support.apple.com/kb/HT2341

  iMac (mid 2007) and later models: on startup tones - http://support.apple.com/kb/HT2538

• I need the firmware for the Toshiba excited AT7 B618

  Hello

  The Tablet keeps showing a message

  Unfortunately, it stopped secret lock

  Ok

  When I press OK it comes again.

  I fact (power + key) factory reset, but it does not solve the problem.

  I installed antivirus it found 7 threats, but he did not remove it because it becomes the vendor applications. Viruses that are present in the backup.

  I need the firmware image to excite at7 - B? Please reply with the download link.
  
  Device name: AT7-B618
  Unit number: PDA0HV-002004AR
  Product group: TOSHIBA

  Best regards
  Department of health Shair
  
  Thank you
  

  I have the same problem, why not support a large company like toshiba product, why I can not download a firmware for AT7-B618?

  Please I need this firmware
  Best regards