Integrated battery Controller PERC H700 - failed status [CF]

Similar Questions

• Mix HD Sas and Sata on the T410 with controller Perc H700 [CF]

  We have a customer using a Sever T410 with Raid Perc H700 controller; We want to add more space to that the creation of a new virtual disk with the connector 1 (now does not).

  Can we add 2 new Sata HD 2 TB of space on new Vdisk also during the first Vidsk is the use of Sas 10 K 300 GB HD?

  We ha 2

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could come message privato mandarmi it service tag of server?

• Request preventivo per batteria Controller PERC 6 / i by PowerEdge 1950 Server

  Buongiorno,

  come da oggetto sono a take UN preventivo per sostituzione di una batteria per controller it PERC 6 / I integrated by a server PowerEdge1950 in quanto it software Dell di administration lo tell in stato FAULT, low voltage.

  Speaking saluti.

  Buongiorno,

  the batteria Può acquistare online:

  Accessories.euro.Dell.com/.../ProductDetail.aspx

  Oppure take it supporto a pagamento tramite questo link:

  www1.euro.Dell.com/.../SS

  Todas

  Marco

• Batteria PERC H700 Poweredge T610 [MS]

  Buongiorno

  avrei need by UN nostro recent batteria del PERC H700 integrated su UN PowerEdge T610 Service TAG

  avrei need di one ' offer is there prima possibile procedere con the price by.

  Grazie

  Massimiliano

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  By the spedizione:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società:
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• R410 Sostituzione con PERC H700 hard drive

  Supporto Gentile,

  If line a detailed by the sostituzione di un disco compatibile con quello hoist by R410 Server con controller perc h700

  Speaking Saluti

  Gianluca Ticconi

  Buongiorno, the sto contattando by mail

• PERC H700 adapter w / Cable X394K

  I am upgrading a PowerEdge T310 for a client that was originally shipped with a single HARD drive and no RAID controller (only one hard drive is connected to the mobo).

  I bought a Controller PERC H700 and the cable X394K and hung.  It doesn't seem like something to connect readers to food, with the exception of a connector 12 pin labeld "P3A.  But the server doesn't have a connector anywhere so that I can connect only.  The only thing available is a connector 8 pins on the socket.

  Is there an adapter cable to go from the 8 to 12 pins pins? Or do I need something else than the X394K cable, which provides the SATA data connector and power in a single molded unit?

  Please notify.

  Thank you!

  Hello

  The cable you have (X394K) is not designed for a T310. T310 cable with the right connector is Y690K.

  Thank you

• PowerEdge T710 PERC H700 RAID level migration issue

  In my new role, I inherited a number of servers managed until now by someone else.  One of them is a PowerEdge T710 with a Controller PERC H700.  There are two matrices; the other has four 3TO disks in a RAID-5 configuration.

  I don't need the storage space any where near as much as the reliability factor.  Is it possible to do a migration on-site from RAID 5 to RAID-6 without disturbing data?  There is enough free space, and I have no problem losing a portion of the free space I have.

  "Is it possible to do a migration on-site from RAID 5 to RAID-6 without disturbing data?"

  Yes, BUT you can use this method by ADDING another disk.  RAID 6 requires a minimum of 4 drives.  Insert a disk "to hot', then in the software OpenManage (OMSA), go into storage, PERC, virtual disks and reconfigure in the drop-down list of tasks available for RAID 5.

  "There is enough free space, and I have no problem losing a portion of the free space I have."

  Apart from the fact that RAID 6 requires a minimum of 4 drives, even if you want to spend a 4 drive RAID 5 has a 4-drive RAID 6, it could NOT be done.  You can't make a smaller table.  The controller doesn't know - or care - on real data of BONE on the disks (so the amount of 'free space' is not serious) and is not worried about virtual disk space (which would be filled if the total capacity of the discs has been used).

• Battery on the Controller PERC 6 / i integrated Poweredge R900 and 2950.

  Hi, we have this error below Poweredge R900 and Poweredge 2950 for 4 days now, I hope that he will be gone after 7 days (such as by Maximum learning delay)

  Battery on the Controller PERC 6 / i integrated:

  Name battery 0
  Degraded state
  Loan of State capacity
  Learn the State duly
  Next time learn 0 hours
  Learn 7 days 0 hours maximum
  Learn the Auto Mode

  In case the error continues after 7 days, is there any solution to this? or replace the battery if error remains.

  I had been searching for the right part No. battery so that we can order in advance, thank you for giving the battery part No. for Poweredge R900 and 2950 Controller PERC 6 / i integrated.

  Thank you much in advance.

  concerning

  Rais info is stored on the discs should not be a problem

  R900 page 84 support.dell.com/.../XK9460D.pdf

  2950 page 74 support.dell.com/.../hom.pdf

• PERC H700 RAID 5, 3 disks, 1 Reporting failed and 1 predictive failure

  Hello:

  I have a PowerEdge T410 with a PERC H700, RAID 5 with 3 disks.  The controller reported a failed drive so I replaced the week last with a drive of new/refurbished.  Now only 1 week later it reported another drive has failed and the drive replaced as predictive failure.  Looks suspicious, i.e. I am doubting the controller card.

  I think updating the firmware of the controller first, but not sure if I should replace the faulty drive first, i.e. If updating the firmware could cause table failure.

  Also, if I install OpenManage on a virtual machine (host is ESXi 4.1), OM sees the controller?

  Thank you!

  Start on our live image and export logs of the OMSA facility there. http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=CWF92&FILEID=3550743303&osCode=WS8R2&ProductCode=PowerEdge-T410&LanguageCode=en&CategoryID=di

• PERC H700 integrated + 6 x SAS 6Gbps SSD = type of Non - SSD drive?

  Hi all

  I hope that something quick and easy...

  I installed a PERC H700 completely filled and integrated in a Dell R815 Server bays disc 6 x with 400 GB SAS 6 GB/s SSD drives. I created the virtual disk using the BIOS (Ctrl + R) boot utility, but when creating the data store, it shows that these types of readers Non - SSD.

  I'm missing a simple configuration or VIB, or should I just say to the host that it comes to SSD;

  VMware KB: Activation of the option SSD on based SSD disc/LUNS that are not detected as default SSD

  Thank you

  Jon

  I followed the article to identify the device as an SSD;

  ~ # esxcli storage device base list d naa.6b8ca3a0e79b9500194b56ec78ca4044

  NAA.6b8ca3a0e79b9500194b56ec78ca4044

  Full name: disk space from DELL (naa.6b8ca3a0e79b9500194b56ec78ca4044)

  Definable display name: true

  Size: 1142784

  Device type: Direct access

  Multichannel plugin: NMP

  Devfs Path: /vmfs/devices/disks/naa.6b8ca3a0e79b9500194b56ec78ca4044

  Seller: DELL

  Model: PERC H700

  Revision: 2.10

  SCSI level: 5

  Is nickname: false

  Status: on

  RDM Capable is: false

  Is Local: true

  Is removable: false

  SSD is: true

  Is Offline: false

  Is perpetually booked: false

  Thin Provisioning status: unknown

  Attached filters:

  VAAI status: unsupported

  Other UID: vml.02000000006b8ca3a0e79b9500194b56ec78ca4044504552432048

• Drives 3 TB for DELL PoweEdge R510 with PERC H700 Controller

  Good afternoon.

  Currently, we have 8 x discs 1Tera in our PorwerEdge R510.

  -1 RAID 1 for the first 2 discs, which have the operating system (Windows Server 2008)

  -1 RAID 5 for the other 6 disks

  We strive to upgrade our RAID 5 with new disks of 6 x 3 TB.

  The problem is OpenManage pointed out that the discs that we inserted the 2 TB, and the State is "unsupported".

  Screenshot:

  Status

  Name

  State

  Predicted failure

  Certified

  Bus protocol

  Media

  Capacity

  Used RAID disk space

  RAID disk space

  Hot spare

  Negotiated speed

  Speed measure

  SAS address

  Status: No reviews

  Disk physics 1:0:4

  Not supported

  NO.

  NO.

  SATA

  HARD DRIVE

  2 047,38 GB

  0.00 GB

  2 047,38 GB

  NO.

  6,00 Gbps

  6,00 Gbps

  4433221103000000

  Status: No reviews

  Disk physics 1:0:5

  Not supported

  NO.

  NO.

  SATA

  HARD DRIVE

  2 047,38 GB

  0.00 GB

  2 047,38 GB

  NO.

  6,00 Gbps

  6,00 Gbps

  4433221102000000

  Status: No reviews

  Disk physics 1:0:6

  Not supported

  NO.

  NO.

  SATA

  HARD DRIVE

  2 047,38 GB

  0.00 GB

  2 047,38 GB

  NO.

  6,00 Gbps

  6,00 Gbps

  4433221101000000

  Status: No reviews

  Disk physics 1:0:7

  Not supported

  NO.

  NO.

  SATA

  HARD DRIVE

  2 047,38 GB

  0.00 GB

  2 047,38 GB

  NO.

  6,00 Gbps

  6,00 Gbps

  4433221100000000

  The PERC H700 firmware is:

  Firmware version	12.0.1 - 0091
  Driver version	4.31.01.64
  Version of the Storport driver	6.0.6002.18005

  Do you know why this phenomenon occurs? Do we need to do a Firmware Update for the PERC controller? If so, this will delete RAID 1, OS disks?

  Thank you in advance for your help!

  See you soon.

  If you change to UEFI, you will need to reinstall the operating system. UEFI completely changes the way the operating system reads the system hardware, so there is not a way to avoid a reinstallation.

  The firmware update will not affect the RAID array.

• Reference DELL T420 - battery on PERC H710 adapter controller

  Hello

  I received a yellow warning

  Reference DELL T420 'Battery on PERC H710 adapter controller'

  What it means?

  What should I do?

  Order the new battery?

  It is a simple replacement mission?

  Is it essential?

  Update:

  test URL

  http://www.Dell.com/support/article/us/en/04/SLN130018

  Have nothing, everything seems fine now...

  Thank you

  It is normal so he can make a full discharge of the battery as part of his learning cycle every 90 days. Make sure that this isn't that. If this isn't the case, the reason, give it 24 hours. If it is fully charged, update the system (including RAID firmware, driver first) firmware. If not fully charged yet or it reproduces quickly, then replace the battery - power down to replace.

• Add the disk to the PERC H700 of RAID integrated table 5

  Hi all.

  I have currently a Dell PowerEdge R710 configured with 4 SAS - 2 10 146 k Seagate 2.5 "drives in a Perc h700 integrated Bay RAID-5. I ordered a SAS-2 10 146 k disk Seagate 2.5 "to add to the Bay RAID-5 storage, making it a 5-disc set. What is the best way to add the drive to the RAID-5 array without losing any data? I have OpenManage Server Admin on the server.

  OS: Windows Server 2003 R2 32 BIT

  You can use OMSA... go in storage, PERC, virtual disks and select Reconfigure in the drop-down list of tasks available for your RAID 5.  This will add the disk to your RAID 5, then you will need to adjust the partitions in Windows once it is completed.

• HARD drive failure e battery perc h700 [CF]

  Buongiorno,

  e' possibile situation UN preventivo by a hard e batteria equal o compatibility disk?

  PERC H700

  DELL ST3600057SS 600 GB SAS hard drive

  Power edge R510 (service tag C3YGW4J

  Grazie

  Ramon Cartabia

  the sto contattando by mail.

• PowerEdge R515 (S/T: CCDK65J) - Batteria controller brain [CF]

  Buongiorno,

  Ho di acquistare batteria tampone di ricambio per controller need it (integrated PERC H700).

  VI chiedo Dove e como posso procedere.

  Grazie

  the sto contattando by mail.