Integration of Cisco 4260 in IME 7.0 (3)
Hi all
When you try to add a Cisco 4260 at IME I get the following message:
Unable to verify username/password config [IOEXception - java.security.cert.CertificateException: the required certificate doesen't exist in the key store.]
Before this message that I'm displayed the 4260 certificate and I accept the certificate.
Cisco 4260 running version 7.0. (3) E4 and the version of IME is 7.0.3. I have Cisco 4260 2 with the same problem.
I also refreshed one of the certificates on one of the IPS and the same condition - no luck.
The dashboard indicates the device is it however I have status Event - not connected. I tried to start - connection event and I have the following message:
Error occurs when start voting event (sensor false name)
(I have also check accounts and passwords used in the config and events account definitions)
Any suggestions?
Thank you
Bob
I just work...
Instead of simply throwing IME from office, I launched EMI with the option "Run as Administrator" (even though I'm DRC would be in the server with the Domain Admin account). Then I removed the two IPS devices and readded them. They have started to work immediately.
I hope this helps.
Kind regards
Alan
Tags: Cisco Security
Similar Questions
-
Cisco Security Manager integration with Cisco ACS troubleshooting
Hi all!
I have a problem with the integration between Cisco Security Manager and ACS. I've done the integration, but the identity of the user system doesn't have enough privileges. I know what the problem is, but I don't know how I can change the login of the ACS to the local MSC?
I found a file that specifies the following:
Q.
Is there a backend script or command line interface options to change the ACS to local CicsoWorks connection module?
A.
To restore the server LMS ACS local user mode mode, stop the CiscoWorks
demons and run the following script:
NMSROOT/bin/perl ResetLoginModule.pl
(for Solaris)
NMSROOT\bin\perl ResetLoginModule.pl
(for Windows)
Then, restart the daemon.
I did it, but does not work, any idea?
Hello
I guess you can try to go through the question on WSC and GBA integration troubleshooting:
Few things might have gone wrong:
1 - this command must be run on the server MCS cmd prompt (make sure that you are not on the client computer)
2 - NMSROOT is the directory were MSC Server is installed. Is usually c:\Progra~1\CSCOpx
3. you must stop the deamon Manager before performing this action (and restart)
For example if the directory is the one above to reset the connection locally, you can try the following:
net stop crmdmgtd---> that stops the daemon Manager (can be done by the services window)
c:\Progra~1\CSCOpx\bin\perl c:\Progra~1\CSCOpx\bin\ ResetLoginModule.pl---> restores local authentication
net start crmdmgtd---> restart the Daemon Manager
Can you maybe try again and let me know how it goes?
Thank you
-
Integration of CISCO ISE with another controller wireless lan of the seller
Hi all!
I am currently working on an assignment and eager to integrate the identity service provider in the network. the only problem is that the deployed wireless network earlier of another provider I just need to know that either ISE has integration with the other controller feature wireless provider and can provide guest access control. The LDAP integration is also required.
Waiting for help!
Hello
According to my knowledge Yes, Cisco ISE can be integrated with another controller wireless LAN of the seller, but limited. (Aruba, Rukus) and if you want to add the external identity group to your network, then LDAP integration is required.
-
Integration of Cisco ACS and Cisco NAC Manager - downloadable ACLs
Hello
I have Setup Cisco NAC in my environment. These are all works well. The users themselves will get authenticated via Cisco NAC Manager. The Cisco NAC Manager meets with Cisco ACS for the part of the user database. These are all works well. I would like to activate downloadable ACLs. I tried to use the CISCO-AV-PAIR method and creating a downloadable ACL entry in the shared components, but nothing works. It's either I'm doing wrong or this configuration of the mine does not support downloadable ACLs? Please advice kindly.
Kind regards
RAM
+ 6 012-2918870
Hello
It is not possible.
You cannot push the ACL in the NAC manager.
If you make the Radius of NAC authentication manager, you can do is create roles the NAC Manager, and on the roles you define traffic strategies.
Using the Radius attributes you can then map users to roles.
Please, take a look at this:
HTH,
Tiago
--
If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.
-
Integration of Cisco Unity Connection to my subscribers of CUCM
Hi all
I'm trying to integrate my server CUC to two subscribers CUCMs.
The editor has an exsisting integration using a single SIP trunk between itself and the server of the CUC.
I am trying to get my head around how best to add two subscribers.
I should only add subscribers as secondary hosts tab telephone systems CUC or do I configure separate circuits and the ports from subscribers to the CUC Server?
I am running version 8.0 on CUCM servers and the server of the CUC and the existing integration is SIP based.
I have spare ports allowed for the server of the CUC.
Any help is very appreciated.
Kind regards
Amanda Lalli-Cafini
In addition to the excellent post by Rob (+ 5), you must ensure that the Group of CUCM applied to the basins of the trunk SIP device includes all these Subs or better yet is checked "Run on all nodes" on SIP trunk and the list of route if you use a recent version of CUCM, i.e. 8.5 or newer.
HTH,
Chris
-
IPS Manager Express (IME)
Hello everyone,
I recently found a new product data sheet - called Cisco IPS Manager Express, looks a bit like a new implementation of the IPS event viewer.
Currently downloading the software displays an error, but everything else is present.
Short url is cisco.com/go/ime
What is someone is aware of this tool? How to download?
Concerning
Mathias
EMI is the next generation of VEI.
It will keep track of IPS events and will also probe version 6.1 IPS configuration.
IME is intended for deployment of sensors of 5 or less.
EMI was announced earlier this week.
It is in final testing and will be available in the next month or 2.
IME will be available for download on cisco.com without extra charge for customers with active Service Cisco IPS contracts on their sensors.
Besides IPS version 6.1 also announced, as well as the AIP-SSM-40 for the ASA firewall.
IPS version 6.1 is mainly changes to work with the new Editor IME.
The AIP-SSM-40 is the more powerful version of the AIP-SSM-10 and the AIP-SSM-20 and is meant for use inside the ASA 5520, and ASA 5540.
-
Limitation of UCSM integrated server C-Series
I crossed some line of integrated UCSM Server C-Series
Maximum Volume a RAID and a single RAID Controller in the built-in Rack-mounted servers
A rack mount server that has been integrated with Cisco UCS Manager can have a maximum of a RAID volume, regardless of how many disks are present on the server.
All local hard disks in an integrated rack server must be connected to a single RAID controller. Integration with Cisco UCS Manager does not support the connection of local hard drives rack-mounted several RAID controllers on a single server. We therefore recommend that you ask a single configuration of RAID controller when you order rack mounted servers to be integrated with Cisco UCS Manager.
In addition, do not use third-party tools to create a multiple RAID LUN on rack mounted servers. Cisco UCS Manager does not support this configuration.
Wdey,
The following comment in the documentation is inherited an error early in UCSM when local disk policy was not well understood.
"In addition, do not use third-party tools to create a multiple RAID LUN on rack mounted servers. Cisco UCS Manager does not support this configuration"
It was added so users would not use WebBIOS and then set a policy on the server that would crush like manual mentions. We that will remove the documentation.
The method supported by Cisco for the creation of multiple RAID volumes on a built-in server of series C are like manual Describes. Use WebBIOS to create disk volumes and create a strategy of local drive of the 'any configuration. It is also recommended that all strategies drive on your system is configured with protect the configuration to prevent overwriting an existing configuration, unless the political action you want to perform.
Steve McQuerry
UCS - Technical Marketing
-
The wlan network crash two 1131AG cisco at the same time!
Hi all
I have a strange problem and need help.
Installation program (constellation):
Integrated 2 Cisco Aironet 1131AG connected to a Zyxel of DSL router with 4-port switch, the two AP have the same configuration (with the exception of IP address).
If I patch only AP it works very well, I see the SSID and I can connect, AP01 or AP02 doesn't matter, but if I connect/patch the two AP on the Zyxel ADSL router Port of the AP02 falls down (without flashing) and the Port of AP01 flashing funny (flapp).
No connection to the WebGui interface is possible and the WLAN SSID cannot be found.
Whatever, for a strange problem?
Thanks in advance for the help
Kind regards
Beat
To attach files to configure AP01 and AP02.
Suppose that the AP is still power up. From my experience, there are two reason why you can't access the console: low or high CPU process memory. If there is not enough memory to process, you should get a message complaining about low memory on the console.
From the description of the problem, looks like the APs are running at high CPU. Some packages are transmitted between the AP, IOS is designed to pump to the top of the priority list for the console from time to time; so that the console will be adapted from time to time; even if the AP is running at CPU high. I guess that the Zyxel has no session of port mirror/monitor layout.
I wonder if you can do the following:
1 console set the access point
2. make sure monitor terminal or console logging is enabled
3. launch the fastethernet sachet xmt debug or debug fastethernet bag just before re the second access point is turned on
The PA should display wrapped around packages. If you can collect the output of the show processes cpu | exclude the 0.00, it will be even better.
-
MMIC access after integration of series C with UCS Manager
My question is on the following terms:
This guide contains information and procedures for installing Cisco UCS C200, C210 and C250 servers for integration with Cisco UCS Manager version 1.4 or 2.0.1.
Cisco UCS C-Series-Rack mounting servers are managed by the autonomous integrated software, Cisco (CIMC) integrated management controller. When a series C Rack-Mount Serveris integrated with Cisco UCS Manager, the MMIC manages nor the server. Instead, it is run with the Cisco UCS Manager software. You'll control the server using the Cisco UCS Manager or Cisco UCS Manager CLI user interface.
This means that you literally can't website to the graphical interface of MMIC? Or means that, although you can still access the MMIC, the management of the C series is recommended to run through the UCS Manager?
They are mutually exclusive?
Thank you
Amir
That's right, all the features are moved to Service UCSM profiles and can't do anything of CIMC.
CIMC will report "managed by UCSM" or something like that.
-
Cisco TelePresence SX20 + VCS 8.2 Server and Skype for business 2015
Nice day! My name is Dimitri! Have Cisco TelePresence SX20 + VCS 8.2 Server and Skype for business 2015. Is it possible to set up a conference call SFB and appeal to all subscribers of this conference? At present, we can only call on a single client and SFB. We have the current version of the software TCNC5.1.4.295090 SX20 - is it possible he obnoviti 7, and it will help to improve the situation? Thank you!
I'm no expert on this technology, but I have some idea and already deployed some projects dealing with the integration of Cisco (CUCM, VCS) video infrastructure to Microsoft video infra like Lync. It would be the same process to make it work in your case.
How does your deployed SFB? How do you do a conference for audio and video, participants can join the conference by dialing?
- Mediation server would be required as a front-end server for you to integrate IP/PBXS using SIP trunk to enable voice (audio) Conference with the participants to the PSTN.
- AVMCU Should be (Audio video Multipoint Conferencing Unit) will host the video conference that will include video endpoints as participants.
- Video of Interop (SCREW) Server would be required to interface your SFB to third video conference infrastructure such as Cisco UCM or VCS for the endpoints Cisco call client SFB of endpoint of Cisco to participate to the conference organised on SFB by dialing the conference number.
I'd say contact your AM SFB or Support as well for queries about how to plan your infrastructure SFB and direction.
Kind regards
Acevirgil
-
SHA version supported on Cisco IOS
Guys,
What is the SHA version that we support on the devices that support VPN from Cisco IOS? Just configuration options tell SHA...
I do apreciate if you could point me to a cisco document to support your theory because client would require...
Thanks in advance.
hash (IKE policy)
To specify the hashing algorithm in a policy of Internet Key Exchange, use the command hash policy Internet Security Association Key Management Protocol (ISAKMP) configuration mode. IKE policy define a set of parameters to use when the IKE negotiation. To reset the hash algorithm for the algorithm of hash-1 defaultsecure hash algorithm (SHA), don't use No form of this command.
hash {sha | SHA256 . SHA384 | md5}
no hash
Description of the syntax
SHA
Specifies the hash algorithm SHA-1 (HMAC variant).
SHA256
Specifies the family of SHA-2 256 bits (HMAC variant) as the hashing algorithm.
SHA384
Specifies the family of SHA-2 384 bits (HMAC variant) as the hashing algorithm.
MD5
Specifies the MD5 (HMAC variant) as the hashing algorithm.
Default values
The SHA-1 hashing algorithm
Control modes
The ISAKMP policy configuration
Order history
ReleaseChange11.3 T
This command was introduced.
12.4 (4) T
IPv6 support has been added.
12.2 (33) SRA
This command was integrated into Cisco IOS version 12. (33) SRA.
12.2SX
This command is supported in the Cisco IOS release 12.2SX train. Support in a specific 12.2SX release this train is dependent on your hardware platform game and platform functionality.
Cisco IOS XE version 2.1
This command was introduced on the ASR 1000 series Cisco routers.
15.1 (2) T
This command was modified. Sha256 , sha384 , and keywords have been added.
Of course, depends a bit on your IOS.HTH,Ian -
OmniPass LDAP on Cisco ASA 8.2 (1)
Expensive security experts,
I am facing a problem in trying to set up LDAP integration on Cisco ASA firewall. The requirement is to allow access to remote VPN to the specific group set to AD. When I checked the debugging logs "debug ldap 255", it shows that the authentication is successful with the LDAP server, but the ldap attribute is not get mapped and for this reason, the group policy by default 'NOACCESS' tunnel-group uses (vpn rule set to zero), resulting in zero connection.
I confirmed this by changing the value of NOACCESS from zero to one and found that the VPN is to connect
The name of the user account is testvendor who belongs to the Group of Test-seller.
Could you kindly advice me what Miss me in this configuration. Highy appreciated the help on this.
The configuration and debugging output is shown below.
SEE THE RACE
LDAP attribute-map ABC-SELLER
name of the memberOf Group Policy map
map-value memberOf CN = Test-sellers, OU = Users, OR = Abc, DC = abc, DC = local Allow-seller
AAA-server ldapvend protocol ldap
ldapvend AAA-server (inside) host 10.1.141.7
LDAP-base-dn DC = abc, DC = local
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn CN = ldapvpn, OU = ServiceAccounts, OU = Abc, DC = abc, DC = local
microsoft server type
LDAP attribute-map ABC-SELLER
internal group NOACCESS strategy
NOACCESS group policy attributes
VPN - concurrent connections 0
internal strategy to allow vendor group
Group Policy attributes Allow-seller
VPN - 10 concurrent connections
Protocol-tunnel-VPN IPSec
value of server DNS 10.1.141.7
ABC.org value by default-field
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list split_acl
tunnel-group ABC - AD - type remote access PROVIDER
attributes global-tunnel-group ABC - AD - SELLER
address vendor_pool pool
authentication-server-group ldapvend
NOACCESS by default-group-policy
ABC-AD-PROVIDER of tunnel-group ipsec-attributes
pre-shared-key *.
Note: I tried the below map-value under the attribute ldap PROVIDER ABC as part of the troubleshooting
map-value memberOf CN = Test-sellers, CN = Users, OR = Abc, DC = abc, DC = local Allow-seller
map-value memberOf CN = Test-sellers, OR = Test-sellers, OR = Users, OR = Abc, DC = abc, DC = local Allow-seller
map-value memberOf CN = testvendor, OR = Test-sellers, OR = Users, OR = Abc, DC = abc, DC = local Allow-seller
DEBUGGING LDAP 255
Starting a session [454095]
New [454095] application Session, 0xb1f296b0, reqType = authentication context
Started fiber [454095]
[454095] LDAP context with uri = ldap://10.1.141.7:389
[454095] connect to the LDAP server: ldap://10.1.141.7:389, status = success
supportedLDAPVersion [454095]: value = 3
supportedLDAPVersion [454095]: value = 2
Link [454095] as ldapvpn
[454095] performance Simple authentication for ldapvpn at 10.1.141.7
Search LDAP [454095]:
Base DN = [DC = abc, DC = local]
Filter = [sAMAccountName = testvendor]
Range = [subtree]
DN of the user [454095] = [CN = testvendor, OR = Test-sellers, OU = users, OR = Abc, DC = abc, DC = local]
[454095] talk to Active Directory 10.1.141.7
[454095] strategy of password of reading for testvendor, dn:CN = testvendor, OR = Test-sellers, OU = users, OR = Abc, DC = abc, DC = local
[454095] reading bad password count 0
Link [454095] as testvendor
[454095] Simple authentication for testvendor to 10.1.141.7 performance
[454095] treatment LDAP for user testvendor response
[454095] (testvendor) message:
Strategy of password current [454095]
[454095] authentication successful for testvendor 10.1.141.7
Attributes of user retrieved [454095]:
[454095] objectClass: value = top
[454095] objectClass: value = person
[454095] objectClass: value = organizationalPerson
[454095] objectClass: value = user
[454095] cn: value = testvendor
[454095] givenName: value = testvendor
distinguishedName [454095]: value = CN = testvendor, OR = Test-sellers, OR = users, OR = Abc, DC = abc, DC = local
instanceType [454095]: value = 4
whenCreated [454095]: value = 20111019133739.0Z
whenChanged [454095]: value = 20111030135415.0Z
displayName [454095]: value = testvendor
uSNCreated [454095]: value = 20258545
uSNChanged [454095]: value = 20899179
[454095] name: value = testvendor
Object GUID [454095]: value =) u >. v.H. 6 >... u.Z
[454095] userAccountControl: value = 66048
badPwdCount [454095]: value = 0
codepage [454095]: value = 0
[454095] countryCode: value = 0
badPasswordTime [454095]: value = 129644550477428806
lastLogoff [454095]: value = 0
lastLogon [454095]: value = 129644551251183846
pwdLastSet [454095]: value = 129635050595360564
primaryGroupID [454095]: value = 513
userParameters [454095]: value = m: d.
' objectSid [454095]: value =... n ' J.h.0...
accountExpires [454095]: value = 9223372036854775807
logonCount [454095]: value = 0
sAMAccountName [454095]: value = testvendor
sAMAccountType [454095]: value = 805306368
userPrincipalName [454095]: value = [email protected] / * /
objectCategory [454095]: value = CN = person, CN = Schema, CN = Configuration, DC = abc, DC = local
msNPAllowDialin [454095]: value = TRUE
dSCorePropagationData [454095]: value = 20111026081253.0Z
dSCorePropagationData [454095]: value = 20111026080938.0Z
dSCorePropagationData [454095]: value = 16010101000417.0Z
lastLogonTimestamp [454095]: value = 129638228546025674
[454095] output fiber Tx = 719 bytes Rx = 2851 bytes, status = 1
End of session [454095]
I'm not an expert AD unfortunately, but I found that might help:
http://forkbomb.dadacafe.org/blog/Active_Directory_lacks_memberOf_attribute_for_unknown_reason_.._/
-
How to configure ASA IPS, which is connected to the Internet
Hello guys,.
I am a beginner in the Concept ASA IPS and that my company HAS an ASA 5520.
Currently, ASA has been connected to the router connected ISP and internet acting as a firewall to control the traffic which
is integrated with Websense URL filtering.
Can you please let me know what all should we expected to configure IPS in this scenario, and what is the IPS feature.
What is the main function of the IPS?
Grateful to your messages.
Kind regards
KA.
KA;
The main function of the AIP - SSM in your ASA 5520 is to perform deep inspection packet and signature matching to detect traffic potential of achievement within your network. If this traffic is detected, the AIP - SSM denying traffic to cross your ASA. Here is a link to a brief overview of the product:
http://www.Cisco.com/go/aipssm
First, you must configure the ASA to divert traffic to the AIP - SSM for inspection, it is shown here:
http://www.Cisco.com/en/us/docs/security/IPS/7.0/Configuration/Guide/CLI/cli_ssm.html
So, you want to make sure that background basket interface (GigabitEthernet0/1) is added to a virtual sensor on the AIP - SSM for allow the inspections to occur.
You want to make sure that the signature on the AIP - SSM definitions are up-to-date. This ensures the most accurate protection from the perspective of the AIP - SSM. This will require an active license be installed on the AIP - SSM.
Then, you most likely want to monitor events generated by the AIP - SSM. To do this, Cisco offers a free entry-level called IPS Manager Express (IME) solution. You can learn more and download IME here:
You will want to monitor EMI to learn that the potential risks of security in network traffic crossing your infrastructure. When you experience events for which you would like to understand better, you can site IntelliShield visist Cisco for further investigation:
Details here, can also be extended within the IME event view.
Use of an IPS will be a continuous monitor and learn phase in order to ensure that you are aware of traffic expected and unexpected, and that the appropriate response can be applied. This is something which is different in each environment, so it is not a simple white paper on how to perform these actions.
Scott
-
Hello
I m interested in AMP and I want to better understand how it works. If there is documentation to my questions (that I have found to date of didn t) it would be very nice, if you could send me the links.
(1) when we talk about firepower integrated in Cisco ASA, is there a local sandbox running on the firewall that analyzes the files or will download all files in the cloud?
2.) are all in of Villa or normal viruses all types of malicious files so recognized or is this feature just about malware? Is a preview available?
(3.) if I decided to use MPAS on a Cisco ASA, is it necessary to install the software on endpoints or is - this optional to collect more data to get a better overview.
4.) what I see in firesight with ASDM in use? If there is a threat, I see the host to which it is native or how it appears? Are the features of the ASDM integrated enough to analyze solution came threats? Where are the restrictions here?
There are probably many more questions, but these are the most important of them...
Thank you
Sebastian
Yes you are right. See the table below.
Table 34-2 firepower Subscriptions Services
Subscription you purchase License you assign in the firepower system TA
Control-Protection (alias "threat and Apps," necessary for system updates)
TAC
Control + Protection + URL filtering
TAM
Control + Protection + Malware
TAMÁS
Control + Protection + URL + Malware filtering
AMP
Malware (the module where already TA)
URL
URL filtering (the module where already TA)
-
Someone at - it a good document for the installation of the unit with CCM 4.0? I installed MAC several times but never the unit and I am looking for some general guidelines to follow when installing the unit with CCM.
Thank you
Shane
Start with the unit installation guide http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_installation_guide_book09186a00802254a5.html
Cisco CallManager 4.0 integration for Cisco Unity 4.0 Guide
http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/prod_configuration_guide09186a00801e9e37.html
Maybe you are looking for
-
Problem of Double synchronized after re-installing Firefox Android
I have the latest version of Firefox for android and Firefox for Mac. The synchronization did not work so I deleted my version of android and reconnected. When I deleted the android version, I had about 8 tabs open. After Re - Downloading Firefox and
-
A sensor of fingerprint Satellite U400-151?
I bought a Toshiba Satellite U400 T5800. When I read the book it says there FINGER recognition but when I open it I don t see it anywhere.Satellite U400-151 finger touch so I can open a windows session?Thank you
-
HP Deskjet and Officejet full feature software and drivers - fatal error during installation
The reports 'HP Print and Scan Doctor' software install problem on the text scanner. In 2008, I bought a HP Pavilion Elite with Vista with a HP OfficeJet 5610 all-in-One connected by USB. About a year ago I upgraded to Windows 7 and print and scan wo
-
I am trying to remove a plugin for java, it interferes with my browser and connection.
-
Why print the String object in class displays the content of this variable and do not String@H=hashCode (). ?