Integration of JSON and CF

Similar Questions

• differences in the use of a backup Favorites file ".json" and a file of bookmarks '.html '.

  Hi all
  What is the difference between the use of a backup Favorites file ".json" and a file of bookmarks ".html"? It seems that both of them do the same job. If this is the case, then why there are two options (.json and .html) to do the same job? If this isn't the case, then what is the reason for the availability of the two options and how are they different? Although I read the material, it didn't quite clear form me again. Please be so kind enough to elaborate on the question so that I can get a clear understanding of their good use (s).
  Thank you very much in advance for your time and skills

  Hello

  See questions/684284

• Visual Studio Professional 2015, Intellisense in bower.json and package.json does not work.

  I installed VS-2015 professional of the MSDN subscription site. When I tried to create a blank site ASP.NET 5, bower and NPM has failed. The survey, I discovered that there wasn't any NodeJS installed on my system in "C:\Program Files (x 86) \nodejs" (even if I chose NodeJS Joyent characteristic during the installation, but the node, NPM and everything has been installed in C:\Program Files (x 86) \Microsoft Visual Studio 14.0\Common7\IDE\Extensions\Microsoft\Web Tools\External). So I installed on the site of NodeJS NodeJS and NPM has started working.

  But in bower.json and package.json intellisense does not work.

  In field, intellisense for the name of the package is now working but for version it still does not. that is, to say I type the name of the package and there is no intellisense when you type the name of the package, if release version inteliisense say the latest stable version.

  Bower.JSON package name intellisense or release version intellisense is available. I have to type the package name and version it displays ' *' only.

  Other people in my team also faced with the same question. Would anyone please be able to help me solve this problem of intellisense for the name of the package as well as regards the final version?

  ------------------------------------------------------------------------------------------------------------------------------------------------------

  Note: after installation of NodeJS NodeJS site, restoration of package started working; only intellisense in file json does not work.

  I tried to install Git for windows as well (bower for troubleshooting site they say to install mysysgit and add it to the path variable) so I install the Git and added the location in the path variable. But still, intellisense did not.

  So, I did the following:

  1 set up Git to use http instead of git: / / with Git Bash

  git config--global url. ' http://".insteadOf git: / /.

  VS configured to use the new Git installed on VS Git

  Right click on folder Bower (under dependencies), and then select "Configure external tools", Unchecked "$(PublicAssemblies%) \Extensions\Microsoft\Web Tools\External\git" and adds a new node with "C:\Program Files (x 86) \Git\bin.

  Restarted the VS and intellisense worked still do not.

  Update 1: I installed Bower with the MUSEUM and after restarting VS several times, release version intellisense started working for bower.json! Then I uninstalled the Arbour (which I installed via NGP) and version intellisese version still works... It's a cause strange scenario now we can't say for certainty that Bower via NGP installation solved the problem like after UN-installing intellisense works always. Although I still do not get the package named by Intellisense. !!!

  ------------------------------------------------------------------------------------------------------------------------------------------------------

  It has become a real nightmare in collaboration with Arbor and NPM in Visual Studio 2015. Help, please!

  Thanks and greetings

  Arun Kumar Dubey

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Kuler integration with Photoshop and Flash?

  It would be nice to see some kuler integration with Photoshop and Flash. I love Illustrator Panel and want to Photoshop and Flash could use it. Unfortunately, the Flash has no support of ESA (probably a legacy of Macromedia) and would require an update to do so. Photoshop has full support ESA. A panel kuler to Photoshop is exactly what people need. This time, I save the swatches and then open them in Photoshop, without successful integration. Implementation of the Illustrator is great. Kuler will have a panel of Photoshop?

  Hello, thanks for the post. For now, check out the Flash CS3 Panel created by Ben Pritchard (Pixelfumes): http://pixelfumes.blogspot.com/2007/06/flash-cs3-kuler-panel-updates.html
  What type of project do you use kuler for?
  Saami

• JavaScript JSON and ApEx integration

  In the community of ApEx, I see a lot of developers to extend their applications with JavaScript and JSON libraries. I would do the same thing to enjoy all the beautiful widgets, gadgets and gizmos that have been developed in the world of script.
  
  
  What is advice to better introduce the use of a script library?
  
  Team ApEx Oracle has an official thought on the extension of the ApEx in a script library?
  
  Y at - it a library which is recommended?
  
  Team ApEx does intend to extend their own library users don't need to use 3 parties?
  
  Have others using these issues experienced the 3rd-party libraries related to upgrades of the ApEx?
  
  
  I need a solution that is solid as a rock (no bugs) and bearable. The apps I support now have over a thousand users. Applications run on our company intranet. It would be undesirable to make calls outside our network http.
  
  Kind regards
  Todd

  Todd,

  We have certainly will continue work on the library, with the main objective on the realization of full namespace (to reduce the risk of collisions with different libraries functions) and the integration of jquery (making use of the features of the great library of basic such as chaining DOM selectors, improved, etc., but not of jquery UI).

  While it is currently possible to integrate with other libraries and many people have had great results with it, there are other plans for the future which should make life easier. To know custom item types, which allows developers to more easily code and reuse 3rd widgets to party in their applications.

  Another plan is what we call "Dynamic action", which will allow developers to set declaratively in the APEX for example activation, deactivation, display client side logic and hiding items. It is about making life easier for developers who do not want to dirty their hands with JavaScript, but still want to achieve such functionality in their applications.

  But I do not think that we could reach a point where "users have no need to use 3 parties. We are not all things to all people, different people have different requirements and tastes. For this reason, providing the best scalability (through custom item types) is the goal.

  We will also improve the documentation on the library, since 3.1, we had a few docs in chapter API user guide, but we will look to improve it with more detailed in future examples.

  Hope this helps,
  Anthony.

• All content tiles missing and integrated PDF reader and password manager no longer works after update to 34.0

  Hello
  After that I updated to 34.0 on OSX 10.9.5 (auto update comprehensive), I noticed that all of the content of the tile is missing. Before the update, I have seen a lot of tiles when I open a new tab. Even after a few navigation, no content appears (I see only an array of blank tiles). I went between white classic, bright, cooler. No effect.

  In addition, integrated in the viewer PDF does not work. All the time I click on the pdf link, I see the window to download the PDF with the title "enter the name of the file to save on...» ». Before the update, PDF Viewer has not worked, no problem. After that I noticed the problem, I checked that the preferences-> requests and confirmed that the action to the 'Portable Document Format (PDF)' content type is set to "Preview in Firefox".

  In addition, Manager of integrated password also stopped working. He remembers no new password. It provides no password already known on the site where he provided automatically the account and the password before the update. I checked the preferences-> Security-> saved passwords. There are a lot of passwords to remember (remember before the update).

  I re - install the firefox manually. It does not help.

  Can someone help me? Is there any information I can provide to sort my problem?

  You can check for problems with preferences.

  Delete possible user.js and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

  Create a new profile as a test to see if your profile is the source of the problem.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Is it possible to remove an integrated MDM? and how? (iPad)

  I have an iPad that I received from a school, but it still has restrictions on what I can't mess with. all restrictions are greyish and unresponsive to a tap.

  The iCloud account that uses the school is still attached, I cannot sign out of it because find my IPad requires the password to iCloud

  On behalf of iCloud from school, which I did not.

  Remove the iCloud account would give me access restrictions? When I go to the limit he didn't ask me for a password at all, all restrictions are just does not respond.

  Also an integrated MDM using the iPad, I can't understand how to remove it because I have the feeling that the profile of MDM may have stopped me to have the opportunity to change the Restrictions.

  I wanted to ask this question because I believe that restrictions stop download 17 + apps like Kik appreciation.

  How did you get this device to a school? If the school still has control of the device, which it follows from what you say here, then there is nothing you can do about it. However, if you bought this from school second hand, then you will need to contact them about the removal of the device of the iCloud account. Once they remove it, and then you would be able to restore the device, which would remove management.

• Manual integration of MS2010 and VS2010 does not

  Hello

  This is a newbie question, but I have some difficulty to get Visual Studio 2010 to integrate with Measurement Studio 2010. I tried to follow the instructions to manually integrate MS vs on the following page:

  http://digital.NI.com/public.nsf/allkb/ACFFB3E03B97D0A8862575ED0058A7B1

  and was able to make the first step in the execution of devenv/setup to the VS command prompt. However, when I tried to do the second step of the choice of editing OR to add to the Toolbox, the only thing in the assemblies/current folder is NationalInstruments.Common.Native.dll, which rejects the Visual Studio with the error not be a .NET module.

  I don't know what I should see in the assemblies/current folder, or how to make this second phase of work.

  Any ideas/suggestions would be greatly appreciated.

  Thank you

  Ana

  Hey Ana,

  Measurement Studio 2010 supports the integration of Visual Studio 2010, so it shouldn't be necessary to do the manual integration.

  When you run Setup for Measurement Studio, you will get a screen that allows to select the features you want to install. You will see a heading "Support for Visual Studio 2010. Make sure you click on the button disk bit beside him and select this option to install this feature. If you expand the category, you will see also the linguistic support .NET Framework 4.0 is a subcategory, and within that category, you will see Visual Studio integration. Make sure that all of these items are selected to be installed (see a small disc with a white icon).

  I suspect that what has happened is Measurement Studio was installed without Visual Studio support or .NET Framework language support - which would explain why Measurement Studio has not been properly integrated, and why you didn't see assemblies .NET into this folder. I think that to re-run the installer and check these settings should solve the problem. Let us know if you need help more!

• Numerical integration of acceleration and speed

  I control a differential robot mounted by two motors. I use encoders to detect the movement of the robot. I kinematic equations for the linear and angular speed of the robot using wheel from coders speed reading. Now, my problem is how to make digital integrations for speeds resulted.

  I need to know a method to do the numercal integration.

  Hello.  I guess you're wanting to integrate the speed to track the position of your robot?  LabVIEW has Integration & differentiation screw that should do the job.  In addition, depending on the configuration of your robot, you can calculate directly measured the count position of the encoder based on the resolution of the encoder and the diameter of the wheel.  I hope this helps!

• Battery on the Controller PERC 6 / i integrated Poweredge R900 and 2950.

  Hi, we have this error below Poweredge R900 and Poweredge 2950 for 4 days now, I hope that he will be gone after 7 days (such as by Maximum learning delay)

  Battery on the Controller PERC 6 / i integrated:

  Name battery 0
  Degraded state
  Loan of State capacity
  Learn the State duly
  Next time learn 0 hours
  Learn 7 days 0 hours maximum
  Learn the Auto Mode

  In case the error continues after 7 days, is there any solution to this? or replace the battery if error remains.

  I had been searching for the right part No. battery so that we can order in advance, thank you for giving the battery part No. for Poweredge R900 and 2950 Controller PERC 6 / i integrated.

  Thank you much in advance.

  concerning

  Rais info is stored on the discs should not be a problem

  R900 page 84 support.dell.com/.../XK9460D.pdf

  2950 page 74 support.dell.com/.../hom.pdf

• Integration of Facebook and Twitter

  Someone tell me how I integrate facebook and twitter into my application

  provide your suggesstion as soon as possible

  public class Home extends UiApplication
  {
      public static void main(String[] args)
      {
          Home app = new Home();
          app.enterEventDispatcher();
      }
  
      public Home()
      {
          pushScreen(new TwitterAPIMERIMOauthSample());
      }
  
  }
  
  public class TwitterAPIMERIMOauthSample extends MainScreen
  {
      private final String CONSUMER_KEY = "";
      private final String CONSUMER_SECRET = "";
      private final String CALLBACK_URL = "";
  
      public TwitterAPIMERIMOauthSample()
      {
          super(VERTICAL_SCROLL);
          setTitle("Twitter Demo");
          BrowserField browserField = new BrowserField();
          add(browserField);
          OAuthDialogWrapper pageWrapper = new BrowserFieldOAuthDialogWrapper(browserField);
          pageWrapper.setConsumerKey(CONSUMER_KEY);
          pageWrapper.setConsumerSecret(CONSUMER_SECRET);
          pageWrapper.setCallbackUrl(CALLBACK_URL);
          pageWrapper.login();
      }
  }
  
  public final class BrowserFieldOAuthDialogWrapper extends OAuthDialogWrapper
  {
      private BrowserField browserField;
      public BrowserFieldOAuthDialogWrapper(BrowserField browserField,String consumerKey, String consumerSecret, String callbackUrl,OAuthDialogListener oauthListener)
      {
          super(consumerKey, consumerSecret, callbackUrl, oauthListener);
          if (browserField == null)
          {
              throw new IllegalArgumentException("BrowserField must not be null.");
          }
          this.browserField = browserField;
          this.browserField.addListener(new BrowserFieldListenerOAuth());
      }
  
      public BrowserFieldOAuthDialogWrapper(BrowserField browserField)
      {
          this(browserField, null, null, null, null);
      }
  
      protected void loadUrl(String url)
      {
          browserField.requestContent(url);
          System.out.println("111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111"+ url);
      }
  
      protected void loadHTML(String htmlContent)
      {
          browserField.displayContent(htmlContent, callbackUrl);
          System.out.println("22222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222"+ htmlContent);
      }
  
      private class BrowserFieldListenerOAuth extends BrowserFieldListener
      {
          public void documentLoaded(BrowserField browserField, Document document)throws Exception
              {
                  trackUrl(browserField.getDocumentUrl());
                  System.out.println("33333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333"+ browserField.getDocumentUrl());
              }
      }
  }
  

  HII All,

  I did twitter integration in blackberry but I got two times login

  Can someone help me how to remove the connection twice problem

  Above here is my code for the integration of twitter

• User input to JSON and mathematical operation

  Hello guys,.

  Now, I am currently building another application, and I want to use JSON as my database. There will be multiple entries (entries user, INTEGER) textfield that will be stored in JSON, so I want to apply a mathematical addition on each entry which is recorded in the JSON (total value) database, and then display it in the user interface. I also want to try this with XML, but I don't know if I could do it with XML.

  The sample application in the documentation (registration with JSON data) is not enforced with user input, but we specify the data. There is also an example of a mathematical operation of database. I still don't know the concept and how to write the code.

  Any help would be appreciated. Thank you.

  Hello
  Mathematical operations can be performed in the application itself.

  (1) create input controls, a button that will trigger the operation. Click, calculate the result, update the result field, then record the entries and result in a DB, JSON or XML file.

  (2) when the page is loaded into onCreationCompleted on the Page read handler registered values (if any) and fill the control with data.

  If you need help, please post the code you have so far and that someone may be power help with specific problems.

• Integration of ISE and SIEM

  Hello

  One of the major concerns about security solutions is the way in which they interact. In particular, ISE is compatible with most of the body available today, as indicated by Cisco (http://www.cisco.com/en/US/prod/vpndevc/ecosystem.html).

  In my particular case, I want to integrate with ArcSight ISE.

  For ArcSight properly analyze syslog messages that sends the ISE, you need to install/configure a smartconnector ISE.

  However, what Miss me is how ArcSight tells ISE to take specific measures on users/devices that are involved in a network attack.

  Please visit: http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5712/ps11640/at_a_glance_c45-728401.pdf

  SIEM/TD partners may utilize ISE as a conduit for taking mitigation actions within the Cisco network infrastructure. SIEM/TD platforms can instruct ISE to undertake quarantine or access-block actions on users and/or device based on ISE policies that have been defined for such actions.
  

  Thank you!

  Octavian

  There is no such docs available so far for ArcSight to ISE integration. I have also found that these two links:

  http://www.Cisco.com/c/dam/en/us/products/collateral/security/identity-Services-engine/at_a_glance_c45-728401.PDF

  http://www.Cisco.com/c/dam/en/us/solutions/enterprise-networks/context-aware-mobility-solution/profile_arcsight_c07-538803.PDF

• integration of TMS and Exchange

  Hi all

  I had planned to integrate Exchange with tms instead of ctsman.

  Could you help me on an integration guide, as well as with your advice.

  Thank you.

  We have a white paper that helps guide you in the management of expectations and planning of such failover.  See https://supportforums.cisco.com/docs/DOC-40301

  For more details on how to proceed with the installation, make sure you please to refer to documents TMSXE and TMS installation.  Material above is a supplement to the people and does not duplicate the information contained in the classic installation documents.

  Materials TMSXE - http://www.cisco.com/c/en/us/support/conferencing/telepresence-managemen...

• Question about the integration of CRM and change on Instance of Salesforce

  I just said that Salesforce is making a change in a few months, which would bring our data out of the instance, they refer to "na2" and on a yet to be announced the instance. The only change on the side of Salesforce would be a new URL associated with all our Salesforce pages. Instead of "https://na.2." ((The) rest of URL) .com ', the new URL might be'https://()new name of the Instance). (Rest_of_URL).com ". I don't think it would have an impact on our integration, but I just wanted to see if there was any potential problems that I'm on. Thanks for the help!

  Hi all

  We have seen customers using several marketing automation systems (including Eloqua) who got this kind of news to SFDC and I have seen no effect when change happens and do not update the credentials, etc. (unless they had regular password changes or something already).

  Best,
  Lauren