Integration Orchestrator and VIPR

Similar Questions

• Orchestrator and vCD

  If Orchestrator is currently your orchestration and integration platform, and you want to implement vCD, how are Orchestrator and vCD?  Is orchestrator tool to use for integration, if you use vCD for virtual machines from a portal providing web front end?

  Technically, you can integrate with vCD API using REST, SDK, Orchestrator and PowerCLI.

  For the integration of band South (blocking tasks, notification, extensibility API) any iterfacing client with rabbitMQ would work but the mechanism of this integration is available in this package: tasks of vCloud Director 5.1/5.5 and notification using AMQP package locking

• Orchestrator and multi-tenant

  I use Orchestrator in a multi-tenancy environment.  What I try to do is:

  Set up a master orchestrator instance where I can centralize workflow execution.

  Implemented the slave instances in environments different tenant I can call with the plugin multiple nodes.

  The problem is that the environments are separate and accessible only via a vpn tunnel.

  How should I configure master orchestrator and the slave to connect via vpn?

  I must:

  1. use a "plugin of VPN connection' if there is one, to establish a connection via vpn?
  2. use the plug-in of HTTP-rest and give the two VCOs, one IP address public and some time to public web interface, if it can be done safely, perhaps to paste the slave vCO in the DMZ?

  3 another way?

  Thanks for the input!

  If you have an always on the VPN connection to the remote/slave instances then just opening the firewall ports to allow the master to connect to the instance of remote/slave.

  Ports are listed on page 38 & 39:

  http://pubs.VMware.com/vSphere-55/topic/com.VMware.ICbase/PDF/vCenter-Orchestrator-552-install-config-Guide.PDF

  Documentation of the plugin of several nodes:

  http://pubs.VMware.com/Orchestrator-plugins/topic/com.VMware.ICbase/PDF/using-multi-node-plugin-10-Guide.PDF

  From what I can tell, you would need the following ports open between the master (source) and remote/slave (destination):

  • TCP - 8230 - the main port to communicate with the server Orchestrator (JNDI port).
  • Trust TCP - 8250 - for SSL (multi-noeuds plugin documentation - "Activate Orchestrator for the remote execution Workflow")

• Orchestrator and integration

  I need to talk to a number of products of third party such as a CMDB, IPAM and DHCP product backup during the procurement process the orchestrator.  What is the best programming language to use? Assuming that I am uncomfortable or having people on my team fluent in java, python, vb.net, javascript and ruby, which is the best language?

  I wouldn't say THAT REST is necessarily "better", it's just that we prefer to use when possible. The plugin makes it pretty easy to use, and it's usually QUICK. When we moved to run external scripts using REST, we literally went from 3-5 minutes per call within 5 seconds in some cases.

  Our usual order will:

  1 REST (vCO plugin)

  2 SOAP (also vCO plugin, but a bit more difficult to use than the REST plugin)

  3 Powershell / shell scripts

  An API which gave us a specific disorder through vCO is XML - RPC. While it is a web API, we could not get that to work without running shell scripts, which kind of defeats the purpose.

  One of the most important factors: sometimes a single API will not expose the same functionality as other API. We have had cases where the REST API didn't expose as much as the SOAP API, even if both were available for the same product. Make sure you according to API you choose offers all the features you need, or you'll find yourself your integrations of rewriting later.

• Discreet Integrator (control and Simulation Module) - LabVIEW 2015

  Hey everybody,

  I'm trying to drag the discreet Integrator on a block in 2015 of LabVIEW diagram. All other vi in the "range of discrete linear systems are draggable, but not the"discreet"Integrator." I noticed the same thing for the continuous Linear Systems Integrator. Anyone explain how to solve this problem?

  Sincerely,

  Lex

  Lexicondi,

  Unfortunately, these functions cannot be moved out of the loop control & Simulation. We support only discrete transfer, of State spaces and ZPK models function.

  So, if you want the "discreet Integrator" outside of the SIM card, you have the following options:

  one) to use the "discreet transfer function" as T /(z-1) (or any other type of discretization available in discreet Design continuous monitoring);

  (b) you can develop your functions inside the control and the Simulation loop and then create a subsystem of her. The subsystem can move outside the SIM card also. Here, you can use any SIM function you want;

  I hope that this should be sufficient for your application.

• Test lab guide: set up an integrated Exchange and Lync laboratory to Test SharePoint question

  Hello

  I'm currently following the guide on how to create and integrate servers Exchange, SharePoint and Lync.

  Everything worked so far to the point where I'm supposed to integrate using a PowerShell script that is provided in step 9 (configure integration between EX1, LYNC1 and SP1)

  1. create a folder C:\Scripts.

  2 copy the following text in Notepad and save it as c:\scripts\s2sauth.ps1:

  The document can be found at: http://www.microsoft.com/en-au/download/details.aspx?id=3961

  When we run the script on LYNC1, we get the following error shown in the image below.

  

  Hello

  Republish the issue to the TechCenter Office for assistance.

  http://social.technet.Microsoft.com/forums/Office/en-us/home?category=ExchangeServer%2Cexchangeserverlegacy

• Vista SP2 and Vipre Premium Version 4

  I installed Vipre Premium Version 4 on my Vista SP2 computer.  It includes a firewall which I am certain is enabled.  However, Vista continues to point out that I have no firewall.  I walked into the Help menu which told me to go to the Security page, under firewall that I would find and option to use another firewall.  I can't find this option.  You have any suggestions for me.

  Thank you

  VIPRE Antivirus Premium 4.0 is a new product, and I doubt that many people here have experience with it.  I recommend posting your question in Sunbelt Software support forums or by contacting Sunbelt Software support .

  I run VIPRE Antivirus (not premium) on my computer and it much. Boulder computer Maven
  Most Microsoft Valuable Professional

• OptiPlex GX620 with Analog Devices ADI 198 x integrated Audio and Windows 7

  Hello...

  I have an Optiplex GX620 with built-in Bios version A11 and 198 X Audio.  I installed Windows 7 on the system and it works fine, except for the Audio.  In recording the sound device Panel, it does not show the adaptors to THE Stereo Mix as active or.  DELL provides on issueing an updated driver after October 22, 2009?  Is there somewhere else I can look for these drivers up to date?

  Thank you.

  Analog Devices ADI 198 x integrated Audio
   
  Release date: 24/01/2007
  Version: A255.12.01.7010
  Important: recommended
  Download Type: driver
  File format: hard drive
  File size: 3MB

  R145551. EXE 32 BIT

  R145149. EXE 64-BIT

  Compatibility

  Systems OptiPlex GX280 OptiPlex GX520 OptiPlex GX620 OptiPlex SX280 Precision 370 Precision 470 Precision 670

• Orchestrator and Hytrust

  When I use Hytrust vCenter HyTrust records which is actually based on the user connected to vCenter.  But when I use 'Share a single session' orchestrator, then my account service is what vCenter records as long as measures, and the user who set up the workflow is known as orchestrtator, is not vCenter or Hytrust.  It must be this way in orchestrator so that the flow of regular work to manage the infrastructure is not dependent on AD to one employee account.  However that impacts my logging and controls around vCenter because now that logging for those scheduled workflows are vRO and not vCenter, and information that the user tries to run this workflow are known only orchestrator. vCenter sees only the service account is trying to do something.

  To a Cloud Computing infrastructure more automation and actions of vCenter happen through vRO and vCenter.  How the previous regime of forest management and authorization in vCenter with Hytrust map to a new concept where I am penetrating orchestrator tasks and using "share a single session"?

  Hello

  I see two possible solutions:

  1. go into hytrust and convince, they fit with vRO. As in vRO very clearly to each execution of the workflow is saved, with the corresponding user, it would be simple enough to analyze / audit this.

  2. use vRO servers, configured with a shared session for scheduled tasks and a separate for the manual workflow began, using the session by user parameters (with all the disadvantages of :-/).

  Indeed analyse vRO level seems to be the "cleanest" approach

  Kind regards

  Joerg

• Orchestrator and plugin development

  I need orchestrator to talk to a number of third-party systems for which no plugin has been developed yet.  It's all part of a single process of provisioning of Vm.  Should I create a plugin for each system for which no plugin exists, or should I create a plugin "Vm provisioning" giant who can talk to multiple systems?

  It depends; both options have advantages and disadvantages.

  I would go for a plugin by approach because it is more flexible (for example. If a new system appears in the future, you will only need to write a plug-in for it and add it to the photo instead of updating the giant's fits-them-all plug-ins).

  You can also consider using the existing plug-in dynamic Types. Initially, you could make a rapid prototyping with him and later when you become more familiar/feel more comfortable with a 3rd party data API system, to implement a 'good' plugin for it.

• MacBook Pro: Integrated keyboard and mouse not responding pluse

  I have a MacBook Pro 13 ", early 2015, installed with OS X 10.11.4.

  I use it mainly to work, with the screen closed, an external display (via Thunderport) and an Apple and change Vertical Mouse 4 - times connected via Bluetooth wireless keyboard.

  Before I get home, I open the screen, disconnect the power cord and power cord screen Thunderbolt and then close it. I leave the keyboard and Bluetooth mouse on as I leave the office.

  It works normally, but yesterday my Mac kept looking for Bluetooth devices home and would not respond to the built-in keyboard and mouse (with the exception of the switch when maintained supported 10 seconds for a forced stop). Reboot doesn't change anything and I tried to reboot with the disk (Cmd + R) utility or reset the NVRAM (Cmd + Option + P + R) and the keys did nothing. Reset SMC (Shift + Ctrl + Option + power) does not seem to do anything either.

  When I connected a keyboard Apple USB C, the keys have been recorded, but it would still find a missing mouse and go anywhere else than the screen "You are looking for a Bluetooth mouse".

  Back at work today, everything works: built-in and Bluetooth devices.

  Any suggestions?

  Update: the built-in keyboard and trackpad now don't work at all, even when Bluetooth devices are connected.

• Workstation HP Z230: how to disable NVIDIA NVS 315 to use integrated DP and DVI ports

  My HP Z230 workstation was equipped with Windows 7 and an NVIDIA NVS 315 video card.  This card works satisfactorily; However, I recently acquired a monitor Asus PB287Q Ultra high definition (4K), capable of a resolution of 3840 X 2160 pixels.  The NVIDIA card DVI by default generates a graph of the 1920 x 1200 resolution. Therefore, I can't take full advantage of the ability of 4K of my new monitor.

  I tried to uninstall the NVIDIA card to force the PC to recognize the video hardware on the motherboard, but none of the monitors connected to the RFP or DVI ports displays video information.  In other words, my PC recognizes that the NVIDIA card (when connected) and nothing else.

  What should I do?  I'm a LabVIEW programmer and a 4K display is a tool powerful graphics-oriented environments.  Thank you for your help.

  Thanks for your reply, Paul.  I tried what you mentioned, but could not get DP working out until I went to the HP Driver download site and downloaded the Z230 Intel graphics drivers: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5367828 & swLangOid = 8 & swEnvOid = 4060

  Now I have a total of 5 outputs (2 DP and 3 DVI) video! I don't have to remove the NVIDIA cards and I full resolution 4K on the outputs video of DP!  Can not be more happy with my output video.  Now the problem is to convince my supervisor that five monitors high resolution are better than one (not-a-chance).  :-)  Once again, thank you.

• Now I use DSP test integration toolkit and download site OR examples of LV_TIDSP_toolkit. My version of CCS is 3.3 and DSK is eZdsp-digital spectrum, but runs the example of filter, for example. Filter_eZdsp2812 error result.

  
  

  Hi masoud,.

  No need to include this text in the subject line. It must be accurate and must convey what is content.

• System files integrity check and repair the error code = 0 x 4005

  I tried to upgrade Vista Home Premium Service Pack 2 several times. Now, after running Startup Repair, I'm - Root cause found: not specified system configuration change might have caused the problem. Result: doesn't have a = 0 error code x 4005 takes time = 734ms all other tests and diagnostics completed successfully.

  Hello

  1. are you able to boot to the desktop?

  I suggest that you try to perform system restore recovery of the form options and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  It will be useful.

• Inspiron 1545 integrated webcam and Windows 8

  Hello

  I've recently updated for Windws 8. I was very happy because it was cheap enough and everything seems to work smoothly on the old machine.

  However, I noticed that my webcam was not working. In Device Manager, I found an unknown device, which must be the webcam, as it does anywhere else. No matter what I do, I can't get the webcam installed. Other sites tell me maybe I got the Dell support site and download the latest driver.

  On page that Windows 7 is barely supported then of course there is no driver to download it. I tried to uninstall the strangers and installation (Vista) webcam drivers age without success.

  Can someone help me? All advice is appreciated.

  Thank you

  Andy

  Andy,

  Look at the Inspiron 1545 repair. Page 46 of reading. I think that this model has screws around the bezel. On other models, the bezel comes off by getting your nails under him gently. Some have no screws.

  Once Pierce you the loose bezel at the top, unplug the webcam, then reconnect it.

  Rick