Interesting question in PS CS5.

Similar Questions

• First, I'm joining the forum with a question CS4 and CS5 Suite for Mac. Can someone tell me why it is NOT a place to submit a question as it is here?

  First, I'm joining the forum with a question CS4 and CS5 Suite for Mac. Can someone tell me why it is NOT a place to submit a question as it is here?

  Creative Suites Mac forum seems to be closed, so moved that Creative Suites Windows the Forum of Creative Suites "base".

  Then... Post your question and someone may be able to help... is your question about the installation of the old software on a new Mac?

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• How can I vote for an interesting question on the dedicated forum?

  Hello

  I know that Muse is a brand new application, but there are several relevant question - in my opinion - that should be considered first.

  After much navigation (!), I found a forum where you can vote for these interesting questions users have faced.

  Unfortunately, I'm unable to vote for one of theses messages if I am connected.

  Is there something to do to get this "right to vote"?

  I really want to participate in this improvement, just gimme the tools to do!

  Thanks for your response

  We know a few emails as of late in the ideas of the forums section and thus our Admin had turned off their.

  I have re-enabled them so you can vote and add ideas and apologize for the inconvenience.

  -j

• Basic question about Flash CS5 Pro

  I apologize for my question here but I couldn't find a Forum so basic Flash where my question would be held. I'm editing my AVCHD in CS5 movies and tried to add some animations with Flash. After two days of hard work, I managed to create a SWF file to a motion tween that I could add to PrPro: the SWF is a card on which a ship (vector) moves from one port to the other. (I managed to size, modify the movement, etc.). So far, is good. I am stuck at the next step: I would like to move the ship at the next port, after it remains to the present for a few seconds, but I can't handle this. I can add a timeline and a new motion tween, but the ship won't be exactly in the same place where she ended the previous trip. I don't know that there must be a simple solution. Also, I have a few questions (very primitive) that I have post in the appropriate Forum of Flash (if I find). Sorry for the long post and I'd appreciate any help. LACI.

  Well, from http://forums.adobe.com/index.jspa I see 7 forums starting with Flash

• can I ask a question about photoshop cs5 PSArt.dll?

  Hello

  I have photoshop cs5 normal (not extended), and I run it on windows 7 32 bit

  Well, can anyone confirm I have just psart.dll?

  I have

  PSArt.dll

  3.68 MB (3.859.624 bytes)

  12.0.4.0

  MD5 hash: 633D1FC91EA3F38563CE1A2ABC4586B5

  I would like to ask this question

  (1) because the start screen for cs5's incredible ugly, but I like

  (2) a friend of mine, told me that he could make/draw nice feel for me

  (3) most importantly, I want the original psart.dll and I fear that has amended it

  the natural look splash

  Take care

  see you soon

  C:\Temp>md5sum "C:\Program Files (x 86) \Adobe\Adobe Photoshop CS5\PSArt.dll.

  ------633d1fc91ea3f38563ce1a2abc4586b5 * C:\\Program Files (x 86) \\Adobe\\Adobe Photoshop CS5\\PSArt.dll

  Seems to me that you have the file "Adobe".

  Editing files from Adobe in general seems to be a bad idea.

  -Christmas

• Audio questions & sequence in CS5

  Hi all

  I'm new to the forum, but not Adobe. I use Marcus first 6.0 for years and it served my needs greatly but as a gift, I have CS5. Now, I've seen a few questions w / audio and sequencing, I thought that you may be able to help with. I have read many of the tuturials and I'm still questions:

  1. audio: I'm used to be able to change the waveform in a particular clip, which you can't do in CS5. You can move the waveform upwards or downwards, but you cannot break the waveform into pieces and put these pieces in a clip of different volumes. How could I get this? If I wanted to discolor or fade out of a clip I used everything, simply apply a breakpoint in the clip and drag it to the bottom. I know there must be a way to do this. Played around audio gain w / the, I'm still very confused about how to do it. I have video clips where I need to have music as my audio, but some of the video has dialogue and some does not, therefore, I need to be able to adjust the audio in a specific clip.

  2 sequences: I'm editing a little comedy short sketch. I have all my video edited and just need to import some JPEG and GIF files. When I bring those to the chronology makes it appear smaller or larger than the actual size of the image. I dragged the JPEG/gif files to the new icon of the element to create new sequences and a new page opens on the timeline for each time I do this. Now when I go to this page, the image looks good, but how do I get this corrected image on my original calendar with the video? I tried to drag the new sequence on my original calendar and it still shows the images in their modified form. I also tried nesting and that didn't work either. They appear smaller or larger than the way it should look like.

  Any advice would be appreciated! Thank you.

  Instead of creating a new sequence for each size of the image, I think you will better establish a sequence that corresponds to any video in the project and then scaling the stills to match that. In CS5, the ability to scale has been greatly improved, however we have too large photos, there is still overhead to consider treatment.

  The scale to the size of the image can be done automatically with "Scale to Default Frame Size" (or similar syntax) checked, or can be done in another program, such as the PS and with Actions, that will be automated up to a point, as well. Can't remember if I posted this link above, but take a look at this ARTICLE. Give read down the thread, as there's more recent comments (article was written there, years when SD was the norm, and CS5 was not yet a dream yet), which are reflected on the improvements to PrPro from CS5.

  Good luck

  Hunt

• Question about the CS5 upgrade paths

  I bought a copy of Creative Suite 2 education for Windows some time ago, but never recorded the CD key in my Adobe account. The program, as far as I know, is never disabled correctly (computer - FRY mounted sudden power aren't fun) and I've never bothered trying to reactivate the program again.

  Well, turns out that I will buy Creative Suite 5 soon, and I was wondering if I can use my old license education upgrade to Creative Suite 5 at retail. I watched the tool of upgrade eligibility on this site, and while he said CS2 qualified for an upgrade, it did not mention if the education licenses have been accepted.

  I think that I also have an educational copy of Photoshop CS2 that I never used since I was the Creative Suite 2 at the same time. Could I use for detail of the Creative Suite 5 upgrade too?

  Thanks for your help!

  Yes you can use it. The upgrade of the suite is much cheaper than the upsell of the individual product. Education versions with full rights to level of detail. You will need the serial number for verification during the installation of CS5. Your timing is pretty good, too.

  CS2 is the oldest version that you can upgrade. In case you're interested, Amazon has a great deal on the CS2 to CS5 Design Premium Upgrade: http://amzn.to/eJQziD

  Bob

• New Win 7 64 bit PC delivered. Questions: upgrade to CS5 to CS4.

  Just got my new Win 7 Pro 64 bit PC. My old PC which is still up and running is a XP Pro 32 bit OS and Photoshop CS4 installed. I will be upgrading the 'new Win 7 64 - bit PC' for CS5 64-bit.

  It is true that the PS can be installed and operational on 2 PC? Can I have PS CS4 running on the old 32 bit and be able to install PS CS4 (64 bit) on the new PC? I know that I will be forced to install CS4 on the new PC to get the CS5 upgrade to install. (Even if the CS5 upgrade is a complete installation, you should check the installation of CS4)

  I have seen different answers to the question above and would like to know the procedure that I have to take to get PS CS5 64-bit installed on my new Win 7 PC. CS4 would probably be uninstalled on the new PC after checking the CS5 works ok.

  Should not have an impact on the issue, but the new statistics system are:

  Windows 7 Professional 64 bit

  ASUS P6X58D Premium Mobo

  I7-980 X Extreme

  12 GB OF RAM

  GeForce GTX 260 Superclocked

  Thanks in advance for any information you can provide!

  Check your license agreement (I think that it is also available @Adobe)

  As far as I know, you can install on 2 computers... the idea being an office and cell phones for travel

  You don't usually need installation to upgrade... everything you need is your old Serial # to enter when asked

• Two questions: Running XP and have some interesting questions at the start and with IE.

  Hi, I try to wear the IT hat and works to clear up some questions on my mother's computer.  #1 I guess that the computer was shipped with a version of Corel Photo software on it and we cannot get rid "Installer" messages at the beginning upward.  We tried to remove the program and the same message comes back to tell us that "Installer can do the requested action without the CD/program files" it gets about 6 of these reviews that it must close any until the computer will continue to boot the system.  Please, please tell me how to get rid of this.  I tried to install the 'Installer' update to see if that would make the difference and nope.  I also tried to remove the Corel file via CCleaner and got the same message.  I do not have the program disc, I don't want to program... I want to just get rid of it!

  #2 when entering address in the Internet Explorer address bar, the browser opens a second browser instead of going to the requested site.  For example, when I open my Internet Explorer and say go to the top of the address bar and typewww.google.com, instead of going to Google, it opens a completely separate browser.  When she did this, it's EXTREMELY SLOW!  until you think that IE went unresponsive and then finally opens the second browser.

  I'd appreciate any help!  I'm trying to solve these problems, while I'll be staying here so that I can leave him a computer running.

  Thank you!

  Hello

  ·        What version of Internet explorer that you are using (Internet Explorer 6, 7 or 8)?

  ·        Was long before Internet Explorer work?

  ·        Since when are you facing this problem?

  Step 1:

  It may be some third-party software that runs in the background that is shown with the process, I suggest you do a clean boot and check. To perform a clean boot follow the steps mentioned in the link given below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: Once you have finished installing, follow step 7 to start the computer in normal startup.

  If the steps above don't help you not to remove the Corel Photo software, I suggest you to post your query on the forums of XP. Click on the link below.

  http://social.answers.Microsoft.com/forums/en-us/xpprograms/threads?filter=answered

  For Internet Explorer related issues, follow steps 2 and 3 of the step.

  Step 2:

  I suggest you run the fix it this tin article given to repair Internet explore

  How to reinstall or repair Internet Explorer in Windows Vista and Windows XP

  http://support.Microsoft.com/kb/318378

  Step 3:

  If you use Internet Explorer 7 or 8 I suggest you run the fix it is present in the article below. If you use Internet Explorer 6, you can follow the steps mentioned in the article given below where they apply to Internet Explorer 6 also.

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry Z10 stupid but very interesting question on your blackberry microphone remote

  Hello

  I have a question that I now have a fight with 10 friends around a table.

  There is a rumor in my country that your cell phone can be heard even when you talk, when he's just sitting idle in stand-by but turned on. As a person can open your microphone from far away and listen to whatever it is you're talking to the table.

  My question is, is it possible? How is it possible?

  Having been to many of the foundries around the world, I can say that it is feasible as possible but almost certainly not practical.  He needs collusion on a scale from Golden to be implemented.

  Any suspicion of a phone, this would result in it being gutted, the tops taken out of the chips, and probes introduced by expert monitoring and chip design.

  What is possible, it is for your position to be checked by means of a phone and a phone to be cloned and calls intercepted. If you talk on the phone, the call can also be intercepted at the end of service provider and to recent leaks, it is a certainty that the Governments that, with the United States it seems to be one of the worst (or best) with a massive mainframes, passing to sift through all the calls of keywords to trigger.

  Unfortunately, it's the world we live in now.

  Hope, your dinner party went well and that you kept your dinner talk about hazardous materials.

• Interesting question of scrolling

  Hi everyone, I have a problem with scrolling in my area

  The page layout, I currently have is:

         vfm0 = new VerticalFieldManager(USE_ALL_WIDTH | USE_ALL_HEIGHT | NO_VERTICAL_SCROLL | NO_VERTICAL_SCROLLBAR);
          add(vfm0);
  
          vfm1 = new VerticalFieldManager(USE_ALL_WIDTH | VERTICAL_SCROLL | VERTICAL_SCROLLBAR);
          vfm0.add(vfm1);
  

  and I add a created custom field to vfm1.

  However, every time I scroll the focus passes power to another, but the screen does not scroll down UNTIL the last field wins the update. Once the last field acquired focus, scrolling further causes the screen to scroll down.

  I tried to add simple labelfields at the vfm1 and it scrolls perfectly but created custom fields are causing the problem.

  Can anyone think of what may cause this effect?

  In the custom field is created, I replace the onFocus() and the onUnfocus() but I do not see why this would have caused this problem.

  I found the problematic code.

  So the custom field I have added is horizontalFieldManager and inside, I bitmapfield

  Now, in the horizontalFieldManager I crushed focus... that makes no sense since fieldmanagers don't really get the focus (as in the past, I read in this forum).

  At the same time, I was the substitution of development for the bitmapfield as well.

  Question/bizarre and illogical behavior...

• interesting question of the vpn site to site NAT/PAT traffic config

  I have an ASA 8.4.2 running code and am just checking the Site to site configs before migration of tunnel. more precisely if the NAT/PAT and ACL is correct. Phase 1 is already defined and work, as well as cryptographic maps and tunnel groups.

  When you set the traffic interesting in the ACL are you using NAT or the real IP? The order of the ACL is correct?

  First of all:

  The vedor network is a 192.168.1.10 and must be coordinated to 10.1.0.2

  name 5.6.7.8 VendorName object-group network VendorName-R network-object host 192.168.1.10 object-group network VendorName-NAT-R network-object host 10.1.0.2 object-group network VendorName-L network-object host 10.1.1.3 access-list VendorName-crypto extended permit ip object-group VendorName-L object-group VendorName-NAT-R nat (inside,outside) 1 source static VendorName-L VendorName-NAT-R destination static VendorName-R VendorName-R

  Second:

  Sellers network is 192.168.1.0 to 192.168.2.0, these must be PATed 10.1.0.2 and 10.1.0.3

  192.168.1.20 and 168.1.21 must be staticly using a NAT 10.1.0.4 and 10.1.0.5

  Name the SupplierName 5.6.7.8

  object-group network VendorName-R-1

  network-object subnet 192.168.1.0 255.255.255.0

  object-group network VendorName-R-2

  network-object subnet 192.168.2.0 255.255.255.0

  object-group network VendorName-R-3

  network-object host 192.168.1.20

  object-group network VendorName-R-4

  network-object host 192.168.1.21

  object-group network VendorName-NAT-R-1

  network-object host 10.1.0.2

  object-group network VendorName-NAT-R-2

  network-object host 10.1.0.3

  object-group network VendorName-NAT-R-3

  network-object host 10.1.0.4

  object-group network VendorName-NAT-R-4

  network-object host 10.1.0.5

  object-group network VendorName-R

  network-object VendorName-NAT-R-1

  network-object VendorName-NAT-R-2

  network-object VendorName-NAT-R-3

  network-object VendorName-NAT-R-4

  object-group network VendorName-L

  network-object host 10.1.1.3

  the object-Network 10.1.1.6 host

  VendorName-crypto allowed extended ip access-list object-VendorName-L Group VendorName-R

  NAT (inside, outside) 1 dynamic source VendorName-l VendorName-NAT-R-1 static destination VendorName-R-1 VendorName-R-1

  NAT (inside, outside) 1 dynamic source VendorName-l VendorName-NAT-R-2 static destination VendorName-R-2 VendorName-R-2

  NAT (inside, outside) 1 static source VendorName-l VendorName-NAT-R-3 of destination VendorName-R-3 static VendorName-R-3

  NAT (inside, outside) 1 static source VendorName-l VendorName-NAT-R-4 static destination VendorName-R-4 VendorName-R-4

  Your valuable traffic acl MUST be the IP NAT address.

• iSCSI Multipathing - interesting questions

  Hi all

  Here is the scenario, I have an ESXi4.1 environment. I had 4 servers ESXi and vCenter server. I need to configure the iSCSI. I use a NetApp box for this. I create vSwitch which I create a VMkernel port and assign an IP address that is in the same subnet as NetApp box. I give this all active vSwitch 4 network cards and then activate the s/w iSCSI initiator. I am able to communicate with the NetApp box. now the question is through which nic I am communicating to the BOX iSCSI?

  What happens if one of the this vSwitch vmnic fails?

  Can I configure the aggregation of links for this configuration with a single port VMkernel, it balances the load in this case?

  For iSCSI, I do not recommend to use the aggregation of links, but to set up the network, in the right way (and as suggested by the storage for vSphere provider) to use MPIO.

  NIC working? Generally, one for each LUN... (so more LUNS are a good idea).

  André

• Question of export - cs5 to cs6

  Hello

  I paint images with illustrator and convert .eps files before using them in my latex file. I was using cs5 until two weeks ago and I have not had any problems.

  I changed to cs6 and now, every image on an entire page in latex. What I mean is, the program was able to identify automatically when the drawing was in the entire page and it raised accordingly. Right now, it does display the entire page.

  I cut each in latex .eps file, but I hope that it is possible to make it more automatic.

  Thank you very much

  Jan

  Before saving to EPS, you opposed > plans > correspond to the limits of the work.

• Questions of Raster CS5.1

  I use Illustrator CS5.1 and just recently I can no longer open or place any type of picture frame. Last week, it was no problem and now, I just get a blank page. My .ai files work very well, but nothing else.

  Thank you.

  ++ JEFF ++

  Are you by chance running FontExplorer? See here

  http://forums.Adobe.com/thread/1038551?TSTART=0