Intermittent connectivity of AirPrint

Similar Questions

• WD MyCloud NAS connection low or intermittent connection on new router WRT1900ACS

  I installed a new router WRT1900ACS to replace a former Cisco router and now I get a low or intermittent connect error message. Here is the error message I get:

  I have reflashed the latest firmware (1.0.0.169041), reset the router and set it back and from this moment, it seems to be. So I consider this problem.

• WRT1200AC/1900AC WIRED Intermittent connectivity software company (Cisco) VPN - resolved

  I work from a Home Office 24 x 7 as a software engineer supporting the business intelligence world production for a credit/bank card issuer applications - so my 'stuff' has to work.  My components materials network and the machines are "top-shelf."  I recently added a WRT1900AC router and have started to feel the intermittent connectivity WIRED to VPN my company (Cisco AnyConnect Secure Mobility Client).  To be clear, this has nothing to do with the setting of the OpenVPN server is available via the user interface of the Linksys Smart Wi - Fi.  In any case, after many hours of research and changes the configuration on the router (with a significant amount of curse and aggravation), I solved the problem by using the areas of prioritization of media and bandwidth downstream from the HMI.  Question a also experienced, but to a lesser extent, during the wireless connection.  It was confusing, since generally the when router problems occur, they seem to be more related to the Wi - Fi connection rather than wired.  Anyway, I wanted to share this info with other poor souls that might have been ostrasized of their family, friends and colleagues as a result of this almost apocalyptic puzzle.

  You are welcome. Happy holidays! Certainly happy to clarify as needed.

• AFTER THE UPGRADE INTERMITTENT CONNECTION

  PLEASE SOMEONE HELP ME ON MY PROBLEM. I BOUGHT MY WIRELESS ROUTER WRT54G2 IN NOVEMBER 2009 WITH STABLE CONNECTION. I UPGRADED THE FIRMWARE THE OTHER DAY FROM VER.1.0.03 TO VER.1.0.04. AFTER A DAY, I NOTICED AN INTERMITTENT CONNECTION EVERY NOW AND THEN... I CALLED THE INTERNET SERVICE PROVIDER, BUT THEY SAID THEY DIDN'T FIND ERROR IN MY REGARD. SO I ASSUME THAT THE CULPRIT IS THE MODERNIZATION... PLEASE TELL ME WHAT TO DO. IM PLANNING TO REVERT TO THE VERSION 1.0.03 BUT MY BACKUP DISAPPEARED. PLEASE PROVIDE LINKS TO WHERE I CAN DOWNLOAD MY PREVIOUS FIRMWARE... THNX IN ANDVANCE...

  FYI... I used the wired connection for my PC 4

  After each update of the firmware, you must hard reset the router and reconfigure.  Press and hold the button of reset for 30 seconds and then release.  Wait 30 seconds and now the router power cycle.  Once complete connect you via your wired computer to 192.168.1.1 user name empty, admin password.  Now reconfigure the router and your wireless settings and test.

• SEVERE intermittent connection problems

  My family had our router wireless WRT54GX2 for a little more than three years now without any problems. However, last June (between 13 June and 20 June) my family went on vacation for a week to return to an intermittent connection of our router. I'VE isolated the problem to the router and not the Modem, our ISP or cords. Practically from the start, our connection went out for about 10 seconds usually every 40 seconds to 2 minutes (with varying degrees of severity). However, as time has passed, the problem got MUCH worse, to the point where (for about the last six days) at the time where our computer restores a connection the connection would have gone again (the router by totally unnecessary). This problem has been going on with the two wired our (modem router to the computer) and wireless devices. I looked at the "answer" to this problem on the support site, but I can't at the entrance of my value such MTU recommended in this response because the connection turns off so many times, I am unable still load page maintenance based on a browser to the router. Help would be appreciated, I have an annoying, nagging suspicion that the problem is with the hardware itself.

  Thanks for the suggestion. However, before I read that, I contacted a Customer Service representative using the Live Chat option and two of them concluded that my router was defective and qualifies for replacement. Thanks to all who tried to help!

• Problem of intermittent connection with ORA-12519: found appropriate TNS:no services manager

  Hello

  The users are connecting to the database using tnsentry in tnsnames.ora, everything is OK. I get complaints of intermittent connection with ORA-12519 problems. Sometimes, users are able to perform tasks on DB with no problems at all, and sometimes the error pops up.

  2014-10-31 10:57:13.0000] DbConnection::connect > connect to: "TLSDB18/***@TLSABPD9"... Got exception: ORA-12519: found appropriate TNS:no services manager

  
  

  where, as this connection will smooth usually.

  
  

  tlswrk18@illin2492! TLS:tlswrk18 > sqlplus TLSDB18/***@TLSABPD9

  SQL * more: Production of the version 11.2.0.4.0 Fri Oct 31 08:34:17 2014

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  
  

  Please help with this problem.

  The reason may lie with the number of affected processes. Review ORA-12519: appropriate service manager found TNS:no advice and

  https://adesquared.WordPress.com/2012/06/28/fixing-the-root-cause-of-ora-12519-tnsno-appropriate-service-handler-found/

• Loss intermittent connectivity... Airport express router or modem problem?

  Airport express intermittent loss of connectivity?

  Not much information to go here.

  Please provide at least the following details:

  • What exact model of the AirPort Express model do you have?
  • What is an intermittent loss of connectivity? The Express, iPhone, another thing?
  • This working before and just started happening OR if this has always been a problem?
  • Did you do the upgrades of firmware or software recently, when this started to happen?
  • What have you tried so far, to solve this problem?

• intermittent connection problem: 'the user profile Service service has no logon. The remote procedure call failed and did not execute. »

  Hello, I'm having intermittent problems with logging in my Windows 7 computer.

  Often after reboot due to applications of Windows Update or any simply restart after the holidays, I have the following message on trying to connect:

  "The service user profile Service has no logon. The remote procedure call failed and did not execute. "

  When I click 'OK', the machine disconnects and try to restart.  This can occur 2 to 5 times before _works_ .  But sometimes it happens at all.  And sometimes he _partially_ connects, but my "reminder" and the "Sidebar Gadgets' not loading not correctly and I get a different RPC error - for example, I lived once a message RPC over Skype cannot work because the remote procedure call failed.

  I'm fairly certain that it is different from the frequently reported issue 'profile of corruption', which was experienced by others.  This problem manifests itself as 'the user profile Service does not log. The user profile could not be loaded "and is reported as a blocking problem consistently reproducible which is set by the 'fixing' of the profile.

  However, the issue I feel is clearly related to an RPC problem is intermittent and not consistent - maybe one of my devices is not reset properly?  Where I can look in the logs of Windows, to provide relevant information on this subject?

  Because my computer was still under warranty, I have raised the issue of Dell and they removed the damaged system file (user account) last week.

  I hope that this will finally fix the problem (previously the error message disappear and reappear after a few weeks later.)  I'll give it a few more weeks to be sure.

• Have the intermittent connection when you use WiFi and conflict error IP address when using Ethernet

  I have intermittent problems with my wireless internet connection. I contacted the ISP and they analyzed the configuration of the modem-router, changed some and told me to try to reconnect. I try again and the connection is OK. The ISP has caress each other on the back and sent me on my merry way not-so-small. Problem is at an unpredictable time, problems (do) happen.

  Usually the failure scenario does not have a huge problem - plus one
  gene as a problem. I just keep trying to connect through Windows
  Network and sharing Center, and possibly the connection is made. But in some cases, time is critical; I eventually lose 10 to 20 minutes of typing-search-typing-correction-etc in a web form when the connection disappears before making a SHIPMENT. (Some time, after the failed wireless and re - connect, I was actually able to recover pretty quickly that the site has not been exceeded me.) So in this scenario I can't lost any strike.)

  I would like to connect my pc to the internet via an ethernet cable
  the modem-router. I could take this approach right after the wireless
  connection failed. Or in a preventive way, when I know I'll be typing-
  mode of research-type-fixed-etc and I want to be really sure. When I tried this, I get the error "Windows has detected an IP address conflict.

  What I do at this point to get around the Wi - Fi connection and connect through the Ethernet cable?

  The topic is edited for clarity of the moderator.* *.

  [Original title: LOST INTERMITTENT WIRELESS INTERNET CONNECTION]

  It is not clear what parameters your ISP technology management may have changed on your modem/router.  As a general rule, the ISP concerned the link between their server and your modem, but any fiddling with settings that control this link will not effect either on the link between your computer and the modem/router.

  If you still haven't reset your router to its default settings, do not unless you know the necessary internal router settings for you connect to your ISP.  If you have a cable Internet connection, the default settings may work OK, but if you have a DSL, they probably won't.

  You should not get this "IP address conflict" error when you connect the Ethernet cable.  Follow these steps:

  Open the "network and sharing Center" and then click on "change adapter settings".  You should see an icon for your wireless network adapter and an icon for your 'connection to the Local network' (your Ethernet connection).

  • Right click on each of the icons, and select 'properties '.
  • There should be a list titled "this connection uses the following items."  In this list, select "Internet Protocol Version 4 (TCP/IP)" and then click "Properties".
  • The radio buttons to "Obtain an IP address automatically" and "Obtain DNS server address automatically" should both selected.  If this is NOT the case, do so and OK your way out.  Furthermore, cancel your way.

  If a card has been configured to use a specific IP address, your "IP address conflict" should now be fixed (you may need to restart the computer for the change to take effect).

  If cards were already configured to obtain its IP address automatically, the problem lies in the configuration of your router.  You will need to access the router's Web utility to study and make changes.  To help you provide the brand and model of the router of the label on the back or the bottom.  Also do the following to a time where you have an Internet connection:

  Open a command prompt window (type cmd in the search box and press enter)

  1. In the black command prompt window, type the following command, and press ENTER after each line

  ipconfig/all > "% userprofile%\Desktop\ipinfo.txt".

  Notepad '% userprofile%\Desktop\ipinfo.txt '.

  output

  1. In the opened Notepad window, click Edit > select all (or press CTRL + A) and then click Edit > copy (or press Ctrl + C)
  2. In the body of your Question, right-click > paste (or press CTRL + V) the data of the Notepad window
  3. Close Notepad and remove ipinfo.txt from your desktop

• direct mail advertising by intermittent connection and password

  Windows live mail intermittently will not connect to my accounts of att and bellsouth.  If I leave completely direct mail and back, sometimes it will search for emails.  I have double and triple checked that the settings are correct.   It began a few weeks ago.

  The message displayed is:

  Can't send or receive messages for the ** address email is removed from the privacy * account. An incorrect password was entered. The next time that you send or receive messages, you will be asked to enter your user name and password for this account.

  Server error: 0x800CCC90
  Server response:-ERR [IN USE] maildrop busy.
  Server: 'inbound.att.net '.
  Windows Live Mail error ID: 0x800CCC92
  Protocol: POP3
  Port: 995
  Secure (SSL): Yes

  Server response:-ERR [IN USE] maildrop busy.

  The message about passwords is a red herring.

  It may be a connection to a POP3 mailbox at a time box. If you access this account by any other means, for example from a smartphone or other mobile device, then if it is configured for push email, Windows Live Mail will not get a look in. Disable any other e-mail application that accesses the same account to see if the error in Windows Live Mail does not disappear.

  The fault can also occur if the polling interval is shorter that the server will allow. When you view your list of messages, press Ctrl-Shift-O for Options. What is the interval in the arrival of new messages every n minutes? If it is less than 15 minutes, do 15.

• Failures of intermittent connection to the VPN 3000 Concentrator

  Hello

  I managed a VPN 300 hub that works with happiness for several years with no problems. All users are part of the same group and authenticate on a server RSA. We recently moved from Authentication Manager RSA RSA 7.1 Authentication Manager 6.1. Continuous everthing works well for several weeks, then at the beginning of this week we started having users intermittently failing to connect to the VPN. I don't know if this problem is related to our new server RSA, but we have other devices on the network that authenticate on it without any problem, so I guess the problem is with the Concentrator VPN itself.

  When users fail they just get a generic error message 'Reason 427 completed peer connection'. Live event log shows "group = vpn, status = is not off duty" when their connection fails. Other times they connect normally and no error messages appear. There seems to be no real reason, sometimes your connection fails, but if you keep trying you will get eventually in [However it may take several attempts in the course of an hour or two until you succeed, or you can get immediately without a problem].

  I don't think that it's a network problem, because I ran continuous for the hub and the RSA server pings while users are experiencing these problems and there are no drops.

  Authentication RSA server monitor always shows that the user is authenticated successfully, the connection of users actually succeed or not. I'm tempted to reboot just the hub, but we have tunnels VPN site-to-site connected on it and I'm a little worried if it is faulty you can not come back at all.

  Has anyone encountered this problem before?

  Thanks in advance

  Hi Graham,

  My guess is that the new RSA server is slower to react, causing the Timeout vpn3000 sometimes - this would explain all the symptoms (nature intermitten's not in service, the success of logs on the server).

  I don't have a vpn3k at hand to check, but I think that in the config server aaa where you set the ip address etc. of the RSA server, you can also set a time-out value - see if increasing this value help.

  HTH

  Herbert

• Intermittent connectivity device

  Hi, I have an Airport Extreme (Zoom modem).  We have several wireless devices (computers, IPad, mac, iPhone, PlayStation).  Of them connect at some point, but none of them connect all the time.  We unplug / restart the modem and the router and can get some that were not connected to connect, but others who were connected connect then is no longer.  We are unable to understand any model of what will or what does not connect.  The devices are not more than 1 room remotely should not be a problem.  Thanks for any help.

  This has always been the case, or just started happening recently?

  What exact model is your Zoom modem? What about AirPort Extreme?

• Windows XP and intermittent connectivity of Toshiba Satellite problems

  Our Toshiba Satellite will not maintain its wireless connection. This will work for a while then drop off, sometimes it will come back again, and sometimes it won't.
  Sometimes it shows that it is connected and the signal strength is excellent, sometimes it will show that the wireless network has limited or no connectivity. All other PC and laptop computers work properly in the rest of our House using the same wireless connection.

  Does anyone have an idea of what might happen, it doesn't make sense to me.

  More information would be interesting to know if you wait for help... What do you think?

  You should put what model of laptop you have exactly, Toshiba Satellite said nothing. ;)

  Anyway, if you have wireless issues there s always advisable to update the WLAN driver. The latest version can be downloaded from the Toshiba page:
  http://APS2.toshiba-tro.de/WLAN/

• MacBook Pro intermittent connection to the wifi at home. Not met another apple or android products

  My MacBook pro does not connect to my BT Homehub5 without several tests. The correct password is rejected. No other apple or android devices used at home have this problem. BT investigated and say it's a problem with my MacBook apple device. I tried to delete the network wifi and access again without success.

  According to several reports, the BT router "HomeHub" works best with the latest Mac models if you disable radio 2.4 GHz mode in its settings and only use the 5 GHz. Note, however, that very old devices Apple and some third-party devices can then not connect at all.

• Intermittent connection problems migrate SIDHistory and new domain

  Hi all

  Wondering if anyone ahs met it. We have migrated the users and workstations of an old domain (domain A) and included their old sid in the SID History attribute for access to resources. We have also double ACL'd users and groups into action (just in case SID History has failed).

  Once done with the migration, we have added a GPO security policy in the new domain (domain B) to deny local logon to the Domain (domain A) domain users group old. That would give us enough time to finish with server migration while ensuring that users do not connect you with their old domain credentials.

  What's happening at random, from time to time is that a user in the new domain will receive a logon denied error. The error indicates "you cannot connect because the method of login, you use is not allowed on this computer. For more information, contact your network administrator.

  The only reason why I think that the new users in the domain are denied would be SID History, but am not sure. Anyone know why this is happening?

  

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.