WD MyCloud NAS connection low or intermittent connection on new router WRT1900ACS

Similar Questions

• Suggestions to connect a new router to the Modem to an ISP

  
  

  Quite true for some ISPS like Insight.  Before Comcast took over in the box of my son, he had to go through a documented process of insight to connect any other device (router) Insight to the cable modem.  My experience with RoadRunner TimeWarner/Brighthouse when you connect a new router to their cable modems has been that they will assign a new IP address to the new router and will retain the previous pair of IP/MAC address of my router for 30 days before the purge of their DHCP database.  It is very convenient when I setup the router for my friends and then reconnect my router to the network and get my original IP address assigned.  Once I finished the configuration of the router from my friend and connected to its network access, I contact Brighthouse to let them know that they can release the IP address assigned to the router of my friend.  Not all ISPS is more conciliatory than TimeWarner/Brighthouse in this area.

  I also take advantage of this "ability" to Brighthouse when I test backup WRT54G at my new WiFi E3000 router on a periodic basis.

  In short, always contact your ISP to see what procedures must be followed when you want to connect another router to the modem.

• 305 a HP desktop printer: J611 Wireless Desktop HP 305 a series will not connect to new router to talktalk (using Chromebook)

  A new router through Talktalk and since then my printer Wireless does not connect.  It shows on my chromebook as this has already been added as a printer of cloud, but blue light wireless flashes.  Not had any problems before this that he was that we got the new router.  Tired to connect by using the method of the button/PIN button still no joy.

  Please note using Toshiba chromebook on windows/mac.

  Please help as I am ready to scream! Laughing out loud

  Longess

  Hello @longess,

  Welcome to the HP support forums.

  I understand that you have acquired a new router and get your Deskjet 3050 has connected to your new network.

  I would like to help.

  The blue light is flashing on the printer indicates that the wireless radio is on, but the printer is not connected to a network. This is the situation. You have a new router. The printer must be on the network.

  So the next step is to get the printer on the network.

  The deskjet printers family is usually USB wireless setup.

  This causes an obstacle when you use only a Chromebook.

  Chromebook does not support the software needed to turn the printer on the network.

  If you have access to a Windows or Macbook notebook, the following link will help you place the printer on the network.

  Configure the printer to a wireless network for the HP Deskjet 3050 a and 3070 e-all-in-one printer series

  I have something you can try.

  Check out this post from Sunshyn2005.

  Re: Deskjet 3050 does not connect to my wifi network

  If this message does not help to get on the new network printer, you will need to borrow a Mac or Windows computer.

  Good luck

• laptop older does not connect to new router

  Hello

  I have a laptop Compaq Presario A940NR which is several years old.  Until last week, it was connected through a router.  The router has stopped working on all devices (printer, 2 other laptops).  Replaced with a Netgear N150 router. -connected to a desktop computer, wireless to the printer and 2 new laptops.  Most old laptop listed above does not connect to the network.  I tried (wired) connection directly to the ISP modem via ethernet.  He does not even recognize this connection.  I may need a driver updated, but unable to connect to the internet on the laptop.

  Help! and thank you,

  Hi, Darlene:

  Here are more recent (MARCH 2011) a version of the driver for your Atheros wireless card. I suggest you use it since you have a new router. There was a lot of connection problems with your Atheros card and new Linksys E series routers, for example.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=472276&swItem=ob-91782-1&mode=4&IDX=1

  Paul

• HP deskjet 2540: HP 2540 printer will not connect to new router

  Hi, we just changed internet service providers and the printer will not connect to the new router, our HP laptop computer presents the printer in the list of network devices / wireless, but will not accept the password of network to the router when I ask him to connect. Makes me crazy! I have re-installed software etc. to connect the drive and make me anywhere I hope someone can help!

  Dave.

  Replacement/change your wireless router, try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Make sure that your router is set to a fixed channel wireless as the 1, 6 or 11, never 'auto '.  Try channel 1 first and then the other one at a time.  Make sure that the printer and the router are spaced at least 5 feet.

  However, if you have a gateway device (modem + router), all gateway devices are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• HP officejet 4620 cannot connect to new router

  Hello

  I recently got a new router and can print is more wireless.  I know I would say somehow the printer to connect to the new router, but I don't know how to do this.  It seems that just repeat the installation process fixed, but I can't find the disk, I used during my first installation of the printer.  Any ideas?

  Thanks in advance,

  Carter

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• DeskJet 3520 does not connect to new router

  We have a Deskjet 3520 that worked very well with our old clumsy router Belkin. However, we passed just a router ASUS RT-AC66U, and now the printer doesn't seem to be able to communicate with her. We are running Windows 8 on our desktop. Hard, the office is connected to the router via an ethernet cable. How do we get our 3520 in network again?

  Hello

  Please follow the instructions below to fix:

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Kind regards.

• After connecting a new router to Talk Talk, WIRELESS printer will not print.

  Original title: network programs network networking Internet website URL website troubleshooting Web page

  Just plugged a new router to Talk Talk, can I do something with my WI FI printer such that it will not now print?

  Hi Pamela,.

  1. what happens when you try to use the printer Wi - Fi?

  2. you receive messages or error codes?

  3. What is the brand and model of the printer?

  This problem may occur if all the printer settings or your router then reconfigure to communicate with the new router.

  You'll be in touch with Talk-Talk help or support from printer manufacturer to check the same.

  Router connection TalkTalk settings - help

  For more information, see the article:

  Install a printer

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• HP PhotoSmart C4780: need help to connect to new router

  I have a HP Photosmart C4780 all-in-one. All the SW downloaded from HP. worked before but I just have to move on to a new Netgear wireless router. Read the previous replies to forum, but nothing seems to work:

  1. print the HP Network Configuration Page, but the URL says: http://0.0.0.0

  2 tried the WPS button on the printer and the router option, but it times out every time, never connect.

  3 tried the PIN option, but ends with the same result.

  4. I don't have the USB cable anymore, otherwise I would simply use it to connect momentarily.

  5. sometimes there is no time-out, and the printer displays the mention 'WPS error'

  I have Win 7 OS. How the hell can I connect?

  According to the document below the link, one of the conditions to connect the printer to the wireless network is a USB cable. I'm sorry, but it seems that you need to get a to put in place with.

  Installation of the printer software for a network connection Wireless (via an Access Point)

• Not able to connect to new router: WEP / WPA2 problems

  Dear,

  I changed my router and when I want to connect to my 8500 has more to the new network, it asks me a WEP password.

  However, the new network is WPA2 protected, so the printer does not recognize the password.

  The printer does not have the possibility of entering my WPA2 password for the network.

  Any suggestions? The network works fine on my phone/macbook.

  Thanks in advance!

  Dies

  Router brand and model number?   Use a fixed wireless channel as the 1, 6 or 11, never 'auto', try all three.  Use 20 Mhz only or 145Mbps router function.   Try now.

• Samsung S6 connects to the router but no internet

  When I switched to xfinity I bought a C6300. I had problems with the first not allowing my NAS to connect so I exchanged against another. My phone would connect to the router and work fine for awhile then lose Internet connectivity. The only way to get it back is to reboot the router. I tried several different units, and I am now on a C3700. The problem still exists and seems to be deteriorating. All of the suggestions.

  I solved my problem by replacing the Netgear with a Zoom. It was the only one that I could find who said it would work with Android. I hope that Netgear will get things straightened.

• EA6500 unable to connect to the router after Time Machine

  Just got an EA6500 - updated to the latest firmware available.

  I have attached 2 x WD NAS and 1 x WD through the USB port of the device.

  Each time after I finished running Time Machine on the MacBookPro (written to one of the WD NAS), I can no more connection to the router as neither the local IP, or the cisco connect cloud. The error message I get (loosely formulated) is: unable to connect to the router. Please ensure that the router is connected to the internet.

  At this point, all the devices connected to the router (wired and wireless) still can access Internet perfectly. Only the console of the router is therefore more accessible.

  Anyone else have the issue?

  Any ideas on how to solve it?

  Contact support for Cisco and the person advised me to do a factory reset (even if the router is new with no customization!). Regardless, it now works correctly. Cisco Cloud Connect works always before, during, and after a Time Machine.

  "When in doubt, try to turn the grid and the.

• Impossible Windows 7 computer upstairs to connect to a new router that I just installed. It worked fine before.

  I changed ISP and changed my wireless routers. My computer laptop windows 7 connects perfectly, no problem. Cannot connect my desktop computer which is on the floor. IF I take my laptop it it works fine. I changed the settings secure to unsecured and it connected correctly. When I changed this back in would not work again.
  It says that windows is unable to connect to my router. I have reset my modem and router and it continues to happen... What can I do?

  original title: unable to connect to the wireless router.

  Hello

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP 4500 g510n-z-printer connected to the router but not responding do not

  Hello

  I got this printer (HP4500 G510n-z) for 3 years. This worked without any problem until I changed my router and installed a nas on the LAN Server.

  Now the printer is connected via WIFI to router and is perfectly installed on computers connected to the router. But it does not work. I used HP Print-Scan doctor and he finds the device, but it was not connected. I tried to connect to the printer IP of all computers, but I have not received any response (using ping, it doesn't have 75% of the package). On the router configuration page, the printer is connected to the usual IP and on connected computers the TCP - IP is configured correctly.

  I have tried everything and I managed only to reboot the router. But it did not last, each computer remains connected only until you restart the PC nex.

  Sorry if I'm not too clear, please don't exitate ask for more details. Thanks for your help!

  Replacement of your wireless router try now.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• 9.3.4 disabled wifi on an Ipad, but it connects to the router. Just don't download at all

  IPad was working fine, but I've updated to 9.3.4. Now Wireless does not work. Shows connected to the router, but nothing happens, but say unable to connect to the server, error trying to access the internet or by mail. Also turn continuous flashing VPN gray to green, then again, but we have never set up a virtual private network. Don't know if it is connected. Have you tried

  1 disconnection / reconnection to 2 routers that work very well for other devices

  2 reset wireless via settings > general > reset > reset network settings and then hang up again

  3 airplane mode on, wait a few minutes, then shut off again

  Overall, the router will connect to any time, we put the password, but there is no transfer of data. 3 other devices work fine with the router. Don't know where to go from here, or if it is possible to back out from the upgrade. Anyone else having this problem? A research increase the same problem.

  Thank you

  Anything that causes the problem is not specifically 9.3.4, which fixes just a security breach. Have you tried to restart routers?