Intermittent problems with HP Pavilion m9070.uk Boot

I'm trying to fix the computer of my OH but not anywhere get quickly.

Its a

HP Pavilion m9070.uk purchased in January 2008

32 bit

on Vista Home Premium

hard drive 500 GB

Until a few days ago, this PC worked fine without any problems, but now, it's another story.

It intermittently does not start, even if this becomes more common and more frustrating. Sometimes I can get it to go by typing either Esc, F8 etc., sometimes it goes its own and sometimes it does not at all for several attempts. Once it boots it works fine even if don't wake up to the top of his sleep sometimes, but maybe it's a different problem. Nothing I did mades difference and help would be appreciated.

I followed these instuctions

http://support.HP.com/us-en/document/c00899280

Driver roll back, reset BIOS, bootfix etc and then a full system recovery back to the factory settings and whenever it works for a while but the switch it out overnight and it will not start without persuasion.

The first time, the problem occurred the PC Beep, but all quickly extinguished husband and is not sure of the model beep. There has been no subsequent beeps however. At one point, we got a BSOD, but the code does not identify anything specific and I can't find where I wrote it down, will have another look, but again once he didn't come back either.

Where should I go from here?

Any help would be appreciated.

Thank you

Julia

Did you install anything? Have you removed any hardware or software?

Follow these troubleshooting steps.

http://support.HP.com/us-en/document/bph06788

Tags: HP Desktops

Similar Questions

  • iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

    Hello!

    My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

    Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

    What could be?

    Please help me!

    4ntoine

    Here is my model of iMac:

    iMac 27 "mid-2011 model 12.2

    Intel Core i7 3.4 GHz

    AMD Radeon HD 6970M 1024 MB

    OS X El Capitan 10.11.6
    SMC 1.72f2

    Boot ROM IM121.0047.B23

    reset the SMC

    Reset the management system (SCM) controller on your Mac - Apple Support

  • I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. Update

    I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. -Update

    1 iphoto sees not iphone - restart

    2 iphoto sees iphone but says "no pictures" - restart

    3 Iphoto sees phone and photos and I click Import all or import selected - then I have problem of file format and nothing is imported

    NOTE: I have similar problems with image capture - sometimes you can see the phone and photos, and sometimes is not

    I have an imac 2015 - execution of yosemite

    Help my new iphone because 7 is coming today and I am terrified of the transfer.

    Not sure, but in any case iPhoto is a dead - it would be really smart to learn pictures (a totally new and different program with a learning curve and different workflows)

    With the help of pictures with my new iPhone 7 and iCloud photo library all works well without any problem - nothing different photos with my iPhone except the news and the best quality Photos 5

    LN

  • Intermittent problem with IE8

    Using XP Prof SP3. When the computer is turned on for a while IE8 does not connect with the router. Firefox, Outlook and other programs work OK. If I reboot computer IE8 OK still once, after maybe an hour or two of IE8 doesn't is not the same problem came back

    Hi Sean,.

    I see you have some intermittent problems with internet Explorer 8. I'll help you with this problem.

    1. What is the brand and model of the computer?

    2. what security software is installed on the computer?

    3. have you made changes on the computer recently?

    4. What is the brand and model of the router?

    Method 1.

    How to troubleshoot possible causes of problems of Internet access in Windows XP: http://support.microsoft.com/kb/314095

    Method 2.

    Wired and wireless network problems: http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab2

    Method 3.

    You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

    Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    Let us know if you need assistance with any windows problem. We will be happy to help you.

  • 3 laptops different ALL been facing intermittent problems with the USB ports.

    We have 3 laptops at home, running 3 different versions of winsows 7... Home, Professional and Ultimate. They have in recent months ALL given intermittent problems with the USB ports. A device that worked on a port stops working. It may or may not work on another port. A week later it could very well lead again on the port that wouldn't work. This applies to all types of devices.

    A few more questions:

    Is there a USB device that you use with all three computers?

    This problem occurs with all kinds of USB devices?

    The is the problem with all the USB ports on each laptop?

    Have you tried to reinstall the USB drivers? As in, uninstall via the Device Manager, restart your PC and allowing Windows to reinstall?

  • problem with wireless pavilion 14-V041TX

    Hello

    I just buy Pavilion 14-V041TX and using windows 7 ultimate 64-bit.
    but I have problem with detecting all wify.
    I already install all drivers from the HP site for windows 7 64 bit and always show "no connection are available.

    In the Device Manager-> network-> only 2 drop-down menu card: 1. Broadcom BCM43142 802.11bgn card2 Wi - Fi. Realtek PCIe FE Family Controller.

    Note: no problem with my wify connection, because I can not used with my smartphone.

    Hello

    Please find the link given below might help you solve your problem. In case you have tried these steps made me know.

    http://support.HP.com/us-en/document/c02543015

  • HP Color LaserJet CP2025: Intermittent problem with printer producing pink wide unslightly strips

    I use a HP ColorLaserJet CP2015.  From time to time he overprinted documents with pink ribbons which is unslightly.  The documents can be used only for use in-house.

    It is an intermittent problem and may occur as early as the beginning of printing or begin in the middle of a print job.

    I ran a diagnostic report, but I do not know how to interpret it.

    Any suggestions?

    Thank you

    Alan

    P.S. I'm sure that the printer is out of warranty.

    Just thought that I'll let you know that so far I did not have pink wide overprinting.  It seems that it was a faulty cartridge.  Thank you very much. I would not have thought this.

  • Only intermittent problem with wifi on alienware m17x with qualcomm wireless killer

    Hi, I have an alienware M17x with windows 8.1 and qualcomm wireless killer. I have a serious problem with intermittent wifi, that appears when I use programs like Skype, steam, multiplayer games, etc.

    Even if the wifi is connected, the connection suddenly stops working sometimes, especially when I use the applications mentioned above. (if I try to load a Web page during this time, the page remains attached to "resolving host"). Strange thing is if I disconnect and reconnect to the wifi Internet starts working immediately. Or I can wait a few minutes and the connection is re-established automatically. This isn't a problem with the network, because I had this problem on countless wifi networks I've worked, and all my other devices work fine in the same time, that my laptop no longer works.

    Additionally, this problem occurs only on wifi, if I use a connection cable, this never happens. (this is not yet a case of the wifi signal strength, as happens even when I am sitting right next to wifi router and wifi in the notification area icon is visible full signal).

    In the last months, I tried various possible solutions, but none of them have solved this problem:

    -Updated to 8.1 windows

    -Update of the qualcomm network drivers

    -Stop of various applications that I think might have been the origin of the problem

    -Uninstall completely different applications

    -Close all anti-virus programs

    Still after all of these steps, the problem persists. It would not be a big problem, as the loss of connectivity is not permanent, but what makes multiplayer games completely unplayable on my alienware machine. :(

    Just today I tried to launch AlienAutopsy test for my network card in Killer Wireless - N 1103 several times, and each time that the "transfer of data verification test" failed due to no connectivity (all other tests passed very well, only this one test failure all 6 times). I thought that it could be linked and gave me some hope that I might be able to target the cause of this unique problem. Therefore, I post here. If anyone can help me, it would be much appreciated!

    +++ S.O.L.U.T.I.O.N. +++

    «Go to network-> Network and Sharing Center-> change the adapter settings-> Wireless - N 1103-> properties (right click) Killer network card-> and finally UNCHECK it (the f * cking) "Qualcomm Atheros control bandwidth «»

    Enjoy the rush.

    See you soon

  • ExpertDay query-overheating problem with my Pavilion DV6

    Mr President

    First of all, thank you for holding this meeting online.

    The laptop in question is only a Pavilion DV6 6121tx with product # QB367PA bought the India

    The problem is that the Palm becomes too hot after 10-15 min of use. Please note that it is not a problem with the fan/radiator because they are new and the thermal paste is also cool. CPU and GPU temperatures are quite fine and are cool.

    My doubt is what we call the PCH, which becomes too hot. JFYI, the PCH is located just below the palmrest area that becomes hot...

    Please take a look at the snapshot

    My apologies for the bad image. That's why I removed it.

    I agree with chipset problem. I think indeed that this chip is the 'problem '.

    Also, be aware that your laptop is not designed to play games.

    OK I agree that this laptop run most of the games but it will warm up as a side effect.

    However,.

    I searched for information on the PCB and the maximum temperature is...

    The PCH may not work above
    + 108 ° C.

    (Page 239)

    This is the reason why it took so long

    You can find it here. Be warned!

    This document has 900 + pages

    http://www.Intel.com/content/www/us/en/chipsets/value-chipsets/mobile-chipset-HM65.html

    http://www.Intel.com/content/dam/www/public/us/en/documents/datasheets/6-chipset-C200-chipset-datasheet.PDF

    I think it is a mistake to small design. but it's not going to kill your laptop.

    If your continuous pch to 100 for a long time, then you can leave the rest of the laptop for a while.

    Drunks.

  • Problem with laptop Pavilion dv6 wireless connection

    I have a problem with a computer laptop dv6-6b50ea Pavilion of customers. He has win7 64 bit installed and an Intel Centrino WirelessN1030 with blutooth wireless card.

    The user has used the laptop abroad with a 3G usb dongle with T-Mobile, but now wants to connect to his home wireless router.

    Initially only the two switched 3g options are visible in the network for the connection options. Therefore, I uninstalled all T-Mobile software for control of the key usb 3g and removed the dial two profiles, but the laptop wouldn't see any wireless connection.

    The orange light was on the f12 key and I couldn't get the wireless to work. Finally I found that even if it has been enabled in the HP connection manager, it has been disabled by Windows Mobility Center. I finally got the light turns white but still saw wireless networks while two other laptops could see the router in the same place.

    I took the computer laptop and tried it on my own wireless network, and although he saw them he said that they were very poor and wouldn't connect. I tried all the normal things like turning off the antivirus and windows firewall. I've updated the software of the driver from the HP website, but it still wouldn't connect.

    Finally, in desperation I disabled two virtual connections created by the driver. Finally he saw all my access points Wi - Fi including some a long way outside. I have is that it connects and thought that I had a crush, but restarting it would link is no longer. Since I brought the oldes driver I can find on the Intel site, updated twice by HP Support Assistant, who has updated the bios and installed the latest drivers intel, but it now not see any wireless network, or if it does sporadically and does not connect. Ethernet connection works fine.

    I've seen lots of messages on mobile phones of series dv6000 with Wi - Fi and an overheating issues etc. What is the same thing with the dv6 6b50ea?

    Any suggestion would be appreciated

    I had a very similar problem with Tablet Dell Latitude slate ST of my son.

    He has the card brand Dell Atheros wireless bluetooth/wireless combo. He had connection problems in W7, but I was finally able to make it work most of the time.

    I saw on the Dell forums, a lot of people complain about this card.

    I installed W8 on the Tablet and there is no pilot, so I resorted to an old driver w7 and I can't get the map to work most of the time.

    So, I ordered an Intel 6230 without wireless/bluetooth combo card for it and I'll see if it makes a difference.  Intel has W8 drivers for the card.

    I did the same thing you did... inserted a map of the network, D - Link DWA-125 USB into the USB port.  W8 recognized, installed the drivers and it connects without any problems at all.

    The difference between my situation and your is however that the 1030 Intel has no problems experienced with W7 link I know, that's why I suggested a factory reset to see if you can start from scratch and exclude a hardware malfunction.

    If the card still does not work, then of course we should be replaced by a card support listed in the service manual.  Unlike Dell, with all computers laptops HP, you can install one of the maps in the service manual and they must have the part number HP on them or they do not work.

    Kind regards

    Paul

  • Strange Intermittent problem with LOV

    Hello

    I have a strange problem with the my LOV on one of my monitors. When I select a value of LOV(af:inputComboboxListOfValues) and released tab, it works fine. But if I copy and paste a text value that is also present in the LOV list data source, and then tab out then sometimes an exception is thrown.


    oracle.jbo.SQLStmtException: 27122 Houston: SQL error in the preparation of the statement. Instruction: SELECT / * + FIRST_ROWS * / * FROM QRSLT (SEPARATE FROM PROCESS_MASTER ORDER BY SOURCE_FILE_NAME SELECT 1) WHERE (((SOURCE_FILE_NAME COMME (REPLACE(REPLACE(REPLACE(:vc_temp_1,'\','\\'),'%','\%'),'_','\_') |))) ((('%') ESCAPE ' \')))


    Caused by: java.sql.SQLDataException: ORA-01424: missing or illegal character that follows the escape character

    I have ensured that the value pasted in the LOV is exactly the same present in the source data LOV.
    This problem is intermittent. It does not always come.
    The query looks fine for me and works perfectly in another system with the same configuration.

    Can there be a problem with a particular system?

    Same type of problem is mentioned in another post on the forum by a user
    ORA-01424 unexpected


    JDEV: Studio Edition Version 11.1.2.0.0
    Build JDEVADF_11.1.2.0.0_GENERIC_110531.1615.6017
    Oracle 11 g database


    Kind regards
    Naomie

    I raised a SR with support of oracle for this issue and come to know that it is actually caused by a bug (Bug No. 9524564) in RDBMS to Oracle 11.2.0.1 version. This bus has been fixed in the 11.2.0.2 Patch Set.
    The solution is either so, upgrade to the version of 11.2.0.1 to 11.2.0.2 RDBMS by applying patch set.
    or check with the workaround by disabling link furtively and in defining the "_fix_control" = 6163564: stop "as stated in the Bug 9524564.

    ALTER session set '_optim_peek_user_binds' = false;
    ALTER session set "_fix_control" = 6163564: off'

    Kind regards
    Naomie

  • Ignition intermittent problem with Vostro 410

    Last week, I had a problem with my Vostro 410 minitower.

    When power is applied to the area of the Green LED on the back of the PSU and the amber LED on the main Board, both light up normally.

    By pressing the power button sometimes starts the system as usual, with the fixed blue light button, but more often all that happens is the button flashes amber and then nothing, except a slight noise as if a fan is about to begin.

    Remove the power and try again sometimes works, as leaving the box for a while after the first power of the application. The other thing that always work sends a message of WakeOnLAN since another device on my network. the PC starts and runs exactly as if the power button worked.

    Once started the PC boots and works perfectly as before.

    I tested the power supply and they are all to a few percent of their nominal values. Unplug the connector ATX 24 pin as well as a short circuit of the Green wire to Earth begins the PSU.

    I tried to change the on-board battery, but the problem is exactly the same with a new or partially charged battery or nothing at all.

    Can someone please suggest a cause and cure?

  • start of the problem with hp pavilion dv5-1112el

    Good evening guys!

    I had a serious problem with my hp dv5-1112el running in vista.

    One a few days ago I had this problem when I start the laptop it was until after the presentation of the bios, I want to say

    After showing me "Press esc at the start of the menu...". "only after that nothing shoing just black screen!
    Two days ago, I found one when it's making like that if I go to the bios by F10 to press F9 to defult config it ok and today happens to come back but if I mak defult cong bios nothing happen the problem again!

    Please help me!

    Good evening guys!
    Finally, I found the solution for this problem after a few days on this subject!
    I suspect the bios from the beginning and that was the problem, the bios was not good, so I flash
    And the Flash was the problem causes most of the forum and the tutorial I did they are saying to download the update that unzip, rename the file name 3600.bin 3602f21.fd, but it is does not work so I improvise I download the latest version of the bios here
    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75233-1&CC=it&DLC=en&LC=en&OS=2093&product=3841120&sw_lang=

    I have extracted it I have rename the second file name 3603F21.fd to 3603.bin
    I copy the file in my USB after that connect the USB to the computer
    on the computer by pressing the key win + B and after awhile the computer stop beeping and I restart (astala vist!) everything ok

    Thank you

  • problems with hp pavilion dv3510nr

    I bought 2 of these books in January because my wife was going to Iraq for 6 months and we wanted to use the video to talk to eachother. At first his cell phone worked perfectly and then all of a sudden she has problems starting. She informed me that as soon as she turns on the laptop that she hears a loud "thud" and gets a black screen and nothing happens at all except the keyboard lights work. Sometimes, she waited until 5 minutes, but still nothing. To operate sometimes she removed the battery and operate on sector only and it sometimes lights up with a blue screen with no text or drawing: just blue screen empty, then Windows starts. Other times she had to run on battery only and the same situation occurs. Anyone encountered this before? I guess that this thing must be returned in guarantee.

    Thanks in advance.

    It is a problem with the BIOS of the laptop.  The best solution is to send to HP as the laptop is under a 2-year warranty and you have thwe guaranteed - the laptop was recently published.   Good luck.

  • Failures/intermittent problems with Optiarc DVD +-RW AD - 5560 has

    I have an Inspiron 1720 laptop running Windows Vista. June 1 the DVD drive was declared missing. The Device Manager said "this device cannot start. Code 10. " Looking for solutions? "Could not load driver software. A chat with technical support solves the problem by taking control of my computer and do something in the system registry.

    Two weeks later I couldn't eject the CD that had just been snatched. Restart solved that problem.

    Today, the original problem described above reappeared.

    Technical support advised that, so that they can keep fixing these problems Dell will not replace the disc if the warranty does not expire until October.

    Everyone knows the same problem with this drive and what do I do to fix this?


Maybe you are looking for

  • IDE #1 error on Satellite Pro A10

    Hi, my laptop Satellite Pro A10 displays IDE #1 error whenever I try to put it on. This message is all I get, even if it is shown for a short period of time - the laptop always comes back to this message, it tries to load blanbk of the screen just go

  • Time very slow start after the restoration in car merger

    Hello Recently, I restored my drive of Fusion to 2 because Windows blew it all this when I tried to restore from a System Image (please see here: retrieve Windows System Image in Boot Camp 10). Basically, the HDD and SSD separated and I rebuilt the v

  • Why I don't get updated software for 10.2

    Hello I have device LTE for z10 (STL100-1). I don't get updated to 10.2, why is it so?

  • How to install the VPN Client and the tunnel from site to site on Cisco 831

    How can I configure a Cisco 831 router (Branch Office) so that it will accept incoming VPN Client connections and initiate tunneling IPSec site to site on our hub site that uses a VPN 3005 concentrator?  I could get the tunnel to work by configuring

  • Symbols warning on file icons?

    What is the red exclamation point symbol that appears on the icons for the files copied from external media (thumb drives and camera)? The files open fine, but I would like to know what the warning on my file icon symbol. There is a legend of some so