internal stack error on reboot

Similar Questions

• THE INTERNAL STACK ERROR

  PRODUCT NAME: HP 6735 S

  OPERATING SYSTEM: WINDOWS VISTA 32 BIT

  ERROR MESSAGE: ERROR OF BATTERY INTERNAL [601 ERROR CODE]

  Hello

  Please find the link given below might help you.

  Alert battery HP appears before Windows starts

• Status code: internal software error-223091 occurred in the DSA software. Please contact National Instruments support

  Hello

  I work with card 4461.

  When writing the data on the card I get this error

  The channel which has been set up had

  Update rate: 9210

  None of the samples: 87643

  Sample mode: finite samples

  Sync: Synchronization with AI0 even of the same device

  The values lie between 6 V and 1 .2V

  error occurred in the function .

  {Message of error =-223091 = "internal software error occurred in the software DSA. Please contact National Instruments Support.\n\nTask name: Magnet\n\nStatus Code:-223091 "}"

  The Stack Trace:

  «to nNIMSSAIL100.StatusObserverT<><>otNetApi > >.» CheckWithName (StatusObserverT<><>otNetApi > *, tCaseInsensitiveBasicString\\,_STL::allocator\\,nNIDMXS100::tLocaleConsideringWideStringComparitor\\,nNIDMXS100::tLocaleConsideringWideStringCaseForcer>* pName) \r\n

  to nNIMSSAIL100.StatusObserverT<><>otNetApi > >. Check (StatusObserverT<><>otNetApi > *) \r\n

  to nNIMSSAIL100.StatusObserverWrapperT<><>otNetApi > >. Check (StatusObserverWrapperT<><>otNetApi > *) \r\n

  to nNIMSSAIL100.WriteotNetApi >, class nNIMSSAIL100::AnalogWrite, double > (tTask *, Double *, UInt32, UInt32, UInt32, Double, Boolean, Boolean, tScaledDataFormat, StatusObserverT<><>otNetApi > *) \r\n

  to nNINETAI2005100.Write1DotNetApi >, class nNIMSSAIL100::AnalogWrite, double, double, cli::array^ > (task task, Double [] buffer, UInt32 numChannels, UInt32, UInt32 numSamples lines, Double timeout, Boolean autoStart, Boolean interlace) \r\n

  at NationalInstruments.DAQmx.Internal.AnalogSingleChannelWriterImpl.WriteMultiSample (Boolean autoStart, Double [] data) \r\n

  at NationalInstruments.DAQmx.AnalogSingleChannelWriter.WriteMultiSample (Boolean autoStart, Double [] data) \r\n

  Project.Analog1ChannelWriterTask.Write (Double [] data, Boolean AutoStart) in C:\\Project\\AnalogWriterTask.cs:line 446\r\n

  to Project.HardwareIO.WriteAO (Double [] Data, Boolean AutoStart) in C:\\Project\\HardwareIO.cs:line 120\r\n

  at Project.DataAcquisition.RunAcq (C:\\Project\\DataAcquisition.cs:line 182\r\n)

  at Project.DataAcquisition.Run (C:\\Project\\DataAcquisition.cs:line 68\r\n)

  at Project.Program.ThreadFunction (C:\\Project\\Program.cs:line 47\r\n)

  at System.Threading.ThreadHelper.ThreadStart_Context (Object state) \r\n

  at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state) \r\n

  to System.Threading.ThreadHelper.ThreadStart ().

  TargetSite:

  {Void nNIMSSAIL100.StatusObserverT<><>otNetApi > >.} {CheckWithName (nNIMSSAIL100.StatusObserverT<><>otNetApi > *, nNIDMXS100.tCaseInsensitiveBasicString\,_STL::allocator\,nNIDMXS100::tLocaleConsideringWideStringComparitor\, nNIDMXS100::tLocaleConsideringWideStringCaseForcer > *)}

  I am using VS2005 c#

  Please tell me what wroing

  Kind regards

  Alok dandois

  Hey Alok,.

  This error code means that the revision of the map is more recent and not yet supported by the driver.  That the release of new versions of the same map with new features, the ID usually changes requiring a new version of DAQmx.  Try upgrading to the latest version of DAQmx and try again.

  While you're there.  See if you can find the product ID located in Device Manager (if you are using Windows).  Once in the Device Manager, right click on the device and click Properties.  Go to the Details tab, and then copy the entire string that is displayed under "Device Instance Id".  It should look something like PCI\VEN_xxxx & DEV_xxxx...  Paste in a reply in this thread can I be sure of your problem.

  Germano-

• Error - an internal system error has occurred. Please see DXError.log and DirectX.log, during the installation of DirectX.

  Original title: DirectX will not install.

  I blew on it this time, and I completely uninstalled DirectX to attempt to clean install it. Now, it will not install. I get the error "an internal system error has occurred. Please refer to the DXError.log and DirectX.log. "I try to install it again.
  I can't find these two newspapers anywhere, and I'm not 100% sure what to do.

  Hello TheAwesomeJoey,

  Click on item below and follow the instructions to install DirectX.

  Ko ID of Article: 179113 -how to download and install DirectX
  If this does not help, then I suggest that run you a SFC scan to see if there are corrupted files.
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Reboot your system.

  Then try to reinstall DirectX.
  Please answer back with an update on if it solves your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I can't load any web pages (500 Internal Server Error)

  I can't currently load web pages when using Firefox. I get a "500 Internal Server Error" standard page on each site. I tried with IE and there is no problem in loading pages.

  I tried to create a new profile, uninstalling and reinstalling, put to upgrade to Firefox 4 (used previously 3) and uninstalling and wiping all profile information, but nothing has worked.

  The problem began when a video player in Flash has crashed (channel4.com). Windows has been completely insensitive and I couldn't exit the full screen video. I tried pressing ESC, ctrl + ESC, ctrl + alt + delete etc but nothing worked and I had to hold the power button on the tower for 4 seconds to turn it off. When I started upward again once I was introduced to the screen when Windows fails to load normally and I chose the "start Windows normally", that had started Windows successfully. Since then I been unabe to view web pages in Fireox, I always get the 500 Internal Server Error page.

  It is a strange and I'm out of ideas, any help would be appreciated because I really want to go back to using Firefox!

  Thank you

  What security (firewall) software do you have?

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• Internal server error when trying to connect Facebook to Toshiba Places

  I'm looking for help with a problem I've met by using my toshiba SMART tv. I can't link my Facebook to my toshiba places account, it shows "internal server error" while trying to connect via the link given in the statement in the email I received.

  Can someone please help?

  Internal server error means that there is a problem with the server and nothing worng with your account.

  No doubt some temporal problems of the server recommend you simply wait until this problem could be solved.

• {Cannot acess Photos in iCloud - "Internal Server Error", "error code": 500}

  Hello. I've always used Photos app inside icloud, but since 2 weeks ago, I just cant. Whenever I try to use photos inside icloud.com app I got the same error ("Internal Server Error", "error code" {: 500}.)

  I can still see my photos get updated through photostream and icloud windows app. The problem is the only application of photos inside icloud.com

  IS FATAL

  true

  NAME OF THE APPLICATION

  photos

  TYPE

  Server

  JOURNAL

  Tuesday, February 2, 2016 17:46:18 GMT: WARN: could not send message.

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: rules of polyfill or region no. Intl. Jump RegionFormatter to initialize.

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: running the Application Photos

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: since the passage of null in [Object Photos.PreStartupViewController:object619]

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: send request: GET https://p18-photosws.icloud.com:443/ph/startup? clientBuildNumber = 15 G 78 & tanceId=BFE94A4F-B245-45BF-9445-4A3DD396835C&dsid=1029823930&locale=pt-br&cruuid clientIns = 7 d 091310-0f49-4ff0-b86a-29663ff377d9

  Tuesday, February 2, 2016 17:46:19 GMT: DEBUG :--> request 1: GO to https://p18-1-photosws.icloud.com:443/ph/startup? clientBuildNumber = 15 G 78 & clientI nstanceId=BFE94A4F-B245-45BF-9445-4A3DD396835C&dsid=1029823930&locale=pt-br&cruu id = 7 d 091310-0f49-4ff0-b86a-29663ff377d9, headers: body [object Object],: (omitted)

  Tuesday, February 2, 2016 17:46:31 GMT: ERROR: error recovery/starting. (500) response: {"requestUUID": "a4663688-cb28-43f6-00ff-04f22ae7bbf5", "errorReason": "Internal Server Error", "error code": 500}

  BUILD NUMBER

  15G.98d4967

  HOST

  www.iCloud.com

  USER AGENT

  Mozilla/5.0 (Windows NT 10.0;) WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Safari/537.36 Chrome/48.0.2564.97

  IDDM

  1029823930

  ENVIRONMENT

  PROD

  RECENT JOURNAL POSTS

  Tuesday, February 2, 2016 17:46:18 GMT: WARN: could not send message.

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: rules of polyfill or region no. Intl. Jump RegionFormatter to initialize.

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: running the Application Photos

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: since the passage of null in [Object Photos.PreStartupViewController:object619]

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: send request: GET https://p18-photosws.icloud.com:443/ph/startup? clientBuildNumber = 15 G 78 & tanceId=BFE94A4F-B245-45BF-9445-4A3DD396835C&dsid=1029823930&locale=pt-br&cruuid clientIns = 7 d 091310-0f49-4ff0-b86a-29663ff377d9

  Tuesday, February 2, 2016 17:46:19 GMT: DEBUG :--> request 1: GO to https://p18-1-photosws.icloud.com:443/ph/startup? clientBuildNumber = 15 G 78 & clientI nstanceId=BFE94A4F-B245-45BF-9445-4A3DD396835C&dsid=1029823930&locale=pt-br&cruu id = 7 d 091310-0f49-4ff0-b86a-29663ff377d9, headers: body [object Object],: (omitted)

  Tuesday, February 2, 2016 17:46:31 GMT: ERROR: error recovery/starting. (500) response: {"requestUUID": "a4663688-cb28-43f6-00ff-04f22ae7bbf5", "errorReason": "Internal Server Error", "error code": 500}

  Can someone help me?

  I tried to disable the photos on my iphone app, turn back on, nothing works.

  The strange is that the problem is just on icloud.com. Sync on my ipad, iphone and windows app work perfectly. Does anyone have an idea? Its been going on for 20 days

• Internal software error of LabVIEW FPGA Module - 61499

  I get the error next (in a pop-up window) in the phase of sompilation for the FPGA target with a vhdl IP. This error continues to occur even after restart LabVIEW and the PC. Someone at - it solved is this kind of problem before without having to re - install the software?

  Here is the error information:

  Error-61499 occurred at niFpgaXml_GetValue_String.vi<><><><>

  Possible reasons:

  LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has occurred. Please contact National Instruments technical support on ni.com/support.

  Additional information: lack the tag required XML (/ CompileServerList)

  As a first step, I can compile the vhdl IP node successfully. However, once when I'm running a VI with the FPGA, the bureau stop working. After that I restarted by force, it cannot perform the build of a vhdl IP node. Even without connecing to the jury of LabView, he pointed out errors before the end of the sompilation.

  Interestingly, the screw which also includes nodes IP vhdl that I properly compiled before, I can still run the VI to the Commission and it works correctly.

  Thank you

  Looks like your ActiveJobsList somehow has been corrupted. I saw occur when computers are hard stop or blue screen during compilation. I don't have that LabVIEW 2014 installed on my machine, so your path will be a little different, and the file extension will be a .txt or .xml instead of .json, but try this:

  Move the file "C:\Program Files (x 86) \National Instruments\LabVIEW 2014\vi.lib\rvi\CDR\niFpgaActiveJobList.json" (or your equivalent) out of the above directory (back it upward and delete essentially) and restart LabVIEW. Must regenerate the file and resolve the problem.

• HP Pavilion g6 1216er: Internal Server Error

  I want to download drivers for my laptop HP Pavilion G6 1216er, but your site does not work properly.

  This Web page does not open

  http://support.HP.com/ru-ru/product/HP-Pavilion-G6-1200-notebook-PC-series/5145704/model/5200133/DRI...

  Error message:

  Internal Server Error - read

  The server has encountered an internal error or misconfiguration and was unable to respond to your request.

  Reference #3.53e3ab42.1428743862.36988f

  Fixed

• An internal software error occurred. Error code 8. LabVIEW: File permission error.

  I just changed a few contasts to controls in an FPGA core program, so there need to be recompiled.

  but it after compiling the program showed the error.

  An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information:

  Error 8 has occurred to copy in nicrio_StockOutputVhdlAndInstantiation.vi-> nirviGetInstantiation___cRioStock_io.vi-> nirviGetInstantiation___nirviEIOImplementation_modGen.vi-> nirviGetInstantiation___nirviEIOImplementation_modGen.vi.ProxyCaller

  Possible reasons:

  LabVIEW: File permission error. You do not have the correct permissions for the file.
  =========================
  NOR-488: Error detected DMA hardware.

  C:\NIFPGA86\clntTmp\TensionCo~65_FPGATarg~A7_FPGABase~A1_eogs1jH0~18\Crio9426IoNode.vhd

  Ca person the reasons for which he showed an error.

  

  Hello

  I have a few questions,

  1. If you redefine your controls with constants, that you always get the same behavior?

  2. what equipment you try to deploy to? If it's a cRIO, have you formatted your controller and reinstalled the software for it?

  3. I did a little research and it looks like a potential problem may be with firewall/antivirus. Here is the document that explains that:
  http://digital.NI.com/public.nsf/allkb/D8D46FD4DBD1015786257540003B2DC6

  You have an antivirus installed on the computer? You can try to disable it and rebuild the bitfile?

  Kind regards

• LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has Unknown

  Sir/Madam,

  Note Labview 2012 SP1 installed about 2 weeks ago.,.

  Accident occurred during the compilation of an fpga vi who worked satisfactorally in the past.

  When I restarted and went to the message recomplile "LabVIEW FPGA: an internal software error in the LabVIEW FPGA Module" see attached picture of popup.

  I reinstalled Labview in its entirety and backed out the changes I made to the vi but still get the same message.

  Thanks in advance

  Daryl

  It turns out that the question was in the VI and not of LabView FPGA module as the message may indicate. I created a vacuum vi, cut and pasted items in this from the vi error and recompiled and it ran very well.

  Somehow the vi has been corrupted internally.

  Thank you it's fixed.

• FPGA an internal software error occurred. writing of memory

  Hello world

  We encounter an error during the compilation of an FPGA VI. It is probably related to our use of block FPGA memory. We have a non-timed while loop which is reading a host-target FPGA FIFO and writing in memory block (inside a Subvi called z_scan_write.vi). In another loop (this one is timed loop), there's a Subvi we called z_scan_read.vi, within which read us of the memory block.

  Does anyone have an idea what goes wrong and how to avoid this problem? Thank you very much in advance for any suspicion!

  The full error message is as follows. Note that this is for the two subVIs z_scan_write.vi and z_scan_read.vi...

  An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information:
  nirviUIDToObject.vi
  Error getting of to the UID object reference.
  All the analyzed text:

  
  -61060
  C:\Program Files (x 86) \National Instruments\LabVIEW 2010\vi.lib\rvi\ClientSDK\Core\ErrorReporting\Private\nirviPersistentNameToProjectItemLineInfoCallback.vi
  zIntensityTuples/{29C03A58-DC8D-4BC7-BAFA-66AFAE4E42D1}/%s
  
  
  ProjItem
  
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.z_scan_write.vi_FPGACompileCopy00000021.VI
  2747
  Memory write 'memory method Node '.
  
  
  ProjItem
  
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.z_scan_read.vi_FPGACompileCopy00000001.VI
  194
  Reading memory "memory Node method.
  
  
  ProjItem
  
  
  
  

  
  -61060
  C:\Program Files (x 86) \National Instruments\LabVIEW 2010\vi.lib\rvi\ClientSDK\Core\ErrorReporting\Private\nirviPersistentNameToProjectItemLineInfoCallback.vi
  zIntensityTuples/{29C03A58-DC8D-4BC7-BAFA-66AFAE4E42D1}/%s
  
  
  ProjItem
  
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.z_scan_write.vi_FPGACompileCopy00000021.VI
  2747
  Memory write 'memory method Node '.
  
  
  ProjItem
  
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.z_scan_read.vi_FPGACompileCopy00000001.VI
  194
  Reading memory "memory Node method.
  
  
  ProjItem
  
  
  
  

  
  -61106
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  
  
  
  2
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2803
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  3
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2816
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  
  

  
  -61106
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  
  
  
  2
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2803
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  3
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2816
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  
  

  
  -61106
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  
  
  
  2
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2803
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  3
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2816
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  
  

  
  -61106
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  
  
  
  2
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2803
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  3
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2816
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  
  

  We could solve the problem. It was actually caused by the fact that we had set some subVIs to not reentrant. Their semifinal implementation (with the option to clone preallocate) solved the problem.

• Internal software error error-224606 in MIO

  Hello

  I get this error-224606: "internal software error has occurred in the MIO software. Please contact National Instruments. »

  It happens when I try to use the DAQmx controls Task.vi to abandon a task that awaits a digital triggering of an analog acquisition that has no time-out.

  I'm using LabVIEW 2010 sp 1.  My version of DAQmx is 9.2.3.  The camera I use is a DAQPad-6016

  When I was running this software on a USB-6251, I had no such problem.

  All solutions?  Thank you

  Hi pgaastra,

  Hmm, the error you see certainly seems buggy and should be the subject of an investigation.  However, I'm not sure about the validity of the abandonment of a task in the middle to access the DAQmx Read.  There is a better way to achieve your final goal.

  The easiest way is to simply ask the number of samples available.  You would then only call DAQmx Read after there is a number not null samples available.  See the code attached below.

  Best regards

• Internal application error occurred during the opening of Windows Media Player 11.

  an internal application error has occurred
  Is what happens when I try to open or use my windows media player 11 and you're wondering how to fix?

  OT: an inturnal application error has occurred

  Hello

  What operating system is installed on the computer?

  I suggest you try the steps from the following link:

  When I try to use Windows Media Player 11, the program does not start, or some UI elements are blank
  http://support.Microsoft.com/kb/925704

• HTTP 500 internal server error by clicking on the icon of my hotmail on my desk

  I am able to access hotmail through google, but not through my icon on my desktop because of the HTTP500 internal server error, which has been there for over a week now.

  Hello

  1. What is the operating system installed on your computer?
  2. are you referring to the MSN shortcut icon?

  Please, do a right-click on the hotmail on your desktop icon and click on delete.
  Try to create the new hotmail icon on your desktop and check if it works very well.

  Try to use Internet Explorer to launch hotmail and check if it works very well.

  I would also please contact the Hotmail support team for assistance.

  Click on the link below.
  http://windowslivehelp.com/product.aspx?ProductID=1

  See also the below mentioned link.
  http://Windows.Microsoft.com/en-us/Windows7/get-help-with-website-error-messages-HTTP-errors