Internet access without split tunneling VPN PIX
I have a PIX 515E with code 6.31. I installed a VPN to allow access to the internal network from the Internet using the Cisco VPN client. It does not work properly. We have some sellers who demand that we come from our Internet IP range to allow us access to their database on the Internet. This works very well for our internal users, but I will allow users VPN for this also.
Is there a way to allow the user from the VPN client to use the Internet for business access to the internet instead of use the split tunneling to access the internet through their own connection? I would like users to vpn to be NAT would have réécrirait Internet and seeming come from our pool of Internet addresses. What I found references by using the split tunneling, but this won't work for me. Am I stuck getting a VPN concentrator to achieve?
Thank you
Josh
The PIX cannot route a package back on the same interface, he entered the, which includes a customer entering the interface external and routed VPN package back on the same interface.
A router or a VPN concentrator would be able to do this, but not a PIX, sorry.
Tags: Cisco Security
Similar Questions
-
Windows - Internet access, no split Tunnel L2TP VPN Clients does not
Greetings!
I have four ASA 5505 that I configured with 4 site to site VPN tunnels (works perfectly) to connect to our company facilities 4. The ASA is also configured with remote access L2TP/IPsec so that a specific group of users of portable computers can connect to and access to all facilities. It also works very well except for one important exception - my split tunnel setting doesn't seem to work, because I can't connect to the Internet outside the VPN resources.
I accept the inherent risk of allowing tunnels to split from a security point of view since I take the necessary steps to secure the systems used for remote access. I would appreciate any feedback on how to get the job of split tunnel.
Here is the configuration:
: Saved
:
ASA Version 1.0000 11
!
SGC hostname
domain somewhere.com
names of
COMMENTS COMMENTS LAN 192.168.2.0 name description
name 75.185.129.13 description of SGC - external INTERNAL ASA
name 172.22.0.0 description of SITE1-LAN Ohio management network
description of SITE2-LAN name 172.23.0.0 Lake Club Network
name 172.24.0.0 description of training3-LAN network Southwood
description of training3 - ASA 123.234.8.124 ASA Southwoods name
INTERNAL name 192.168.10.0 network Local INTERNAL description
description of name 192.168.11.0 INTERNAL - VPN VPN INTERNAL Clients
description of Apollo name 192.168.10.4 INTERNAL domain controller
description of DHD name 192.168.10.2 Access Point #1
description of GDO name 192.168.10.3 Access Point #2
description of Odyssey name 192.168.10.5 INTERNAL Test Server
CMS internal description INTERNAL ASA name 192.168.10.1
name 123.234.8.60 description of SITE1 - ASA ASA management Ohio
description of SITE2 - ASA 123.234.8.189 Lake Club ASA name
description of training3-VOICE name Southwood Voice Network 10.1.0.0
name 172.25.0.0 description of training3-WIFI wireless Southwood
!
interface Vlan1
nameif outside
security-level 0
IP address dhcp setroute
!
interface Vlan2
nameif INSIDE
security-level 100
255.255.255.0 SGC-internal IP address
!
interface Vlan3
nameif COMMENTS
security-level 50
IP 192.168.2.1 255.255.255.0
!
interface Ethernet0/0
Time Warner Cable description
!
interface Ethernet0/1
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/2
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/3
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/4
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/5
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/6
Description for Wireless AP Trunk Port
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/7
Description for Wireless AP Trunk Port
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
boot system Disk0: / asa821-11 - k8.bin
Disk0: / config.txt boot configuration
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS domain-lookup outside
INTERNAL DNS domain-lookup
DNS domain-lookup GUEST
DNS server-group DefaultDNS
Name-Server 4.2.2.2
domain somewhere.com
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
DM_INLINE_TCP_1 tcp service object-group
EQ port 3389 object
port-object eq www
EQ object of the https port
EQ smtp port object
the DM_INLINE_NETWORK_1 object-group network
network-object SITE1-LAN 255.255.0.0
network-object SITE2-LAN 255.255.0.0
network-object training3-LAN 255.255.0.0
object-group training3-GLOBAL network
Southwood description Global Network
network-object training3-LAN 255.255.0.0
network-object training3-VOICE 255.255.0.0
network-object training3-WIFI 255.255.0.0
DM_INLINE_TCP_2 tcp service object-group
EQ port 5900 object
EQ object Port 5901
object-group network INTERNAL GLOBAL
Description Global INTERNAL Network
network-object INTERNAL 255.255.255.0
network-object INTERNALLY-VPN 255.255.255.0
access-list outside_access note Pings allow
outside_access list extended access permit icmp any CMS-external host
access-list outside_access note that VNC for Camille
outside_access list extended access permit tcp any host CMS-external object-group DM_INLINE_TCP_2
access-list outside_access note INTERNAL Services
outside_access list extended access permit tcp any host CMS-external object-group DM_INLINE_TCP_1
DefaultRAGroup_splitTunnelAcl list standard access allowed INTERNAL 255.255.255.0
access-list sheep extended ip INTERNAL 255.255.255.0 allow INTERNAL VPN 255.255.255.0
access-list extended sheep allowed ip IN-HOUSE-GLOBAL SITE1-LAN 255.255.0.0 object-group
access-list extended sheep allowed ip IN-HOUSE-GLOBAL SITE2-LAN 255.255.0.0 object-group
access-list extended sheep allowed ip object-IN-HOUSE-GLOBAL object group training3-GLOBAL
access-list INTERNAL-to-SITE1 extended permit ip IN-HOUSE-GLOBAL SITE1-LAN 255.255.0.0 object-group
access-list INTERNAL-to-training3 extended permitted ip object-IN-HOUSE-GLOBAL object group training3-GLOBAL
access-list INTERNAL-to-SITE2 extended permit ip IN-HOUSE-GLOBAL SITE2-LAN 255.255.0.0 object-group
no pager
Enable logging
exploitation forest asdm warnings
Debugging trace record
Outside 1500 MTU
MTU 1500 INTERNAL
MTU 1500 COMMENTS
192.168.11.1 mask - local 192.168.11.25 pool IN-HOUSE VPN IP 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 623.bin
enable ASDM history
ARP timeout 14400
Global 1 interface (outside)
(INTERNAL) NAT 0 access-list sheep
NAT (INTERNAL) 1 0.0.0.0 0.0.0.0
NAT (GUEST) 1 0.0.0.0 0.0.0.0
5900 5900 Camille netmask 255.255.255.255 interface static tcp (GUEST, outdoor)
3389 3389 Apollo netmask 255.255.255.255 interface static tcp (INDOOR, outdoor)
public static tcp (INDOOR, outdoor) interface www Apollo www netmask 255.255.255.255
public static tcp (INDOOR, outdoor) interface https Apollo https netmask 255.255.255.255
public static tcp (INDOOR, outdoor) interface smtp smtp Apollo netmask 255.255.255.255
5901 puppy 5901 netmask 255.255.255.255 interface static tcp (GUEST, outdoor)
Access-group outside_access in interface outside
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
RADIUS protocol AAA-server Apollo
Apollo (INTERNAL) AAA-server Apollo
Timeout 5
key *.
AAA authentication enable LOCAL console
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
Enable http server
http 0.0.0.0 0.0.0.0 INTERNAL
http 0.0.0.0 0.0.0.0 COMMENTS
No snmp server location
No snmp Server contact
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
SYSTEM_DEFAULT_CRYPTO_MAP game 65535 dynamic-map crypto transform-set ESP-3DES-SHA TRANS_ESP_3DES_SHA
correspondence address 1 card crypto outside_map INTERNAL SITE1
card crypto outside_map 1 set of peer SITE1 - ASA
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
address for correspondence card crypto outside_map 2 INTERNAL training3
outside_map 2 peer training3 - ASA crypto card game
card crypto outside_map 2 game of transformation-ESP-3DES-SHA
address for correspondence outside_map 3 card crypto INTERNAL SITE2
game card crypto outside_map 3 peers SITE2 - ASA
card crypto outside_map 3 game of transformation-ESP-3DES-SHA
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
delimiter group @.
Telnet training3 - ASA 255.255.255.255 outside
Telnet SITE2 - ASA 255.255.255.255 outside
Telnet SITE1 - ASA 255.255.255.255 outside
Telnet 0.0.0.0 0.0.0.0 INTERNAL
Telnet 0.0.0.0 0.0.0.0 COMMENTS
Telnet timeout 60
SSH enable ibou
SSH training3 - ASA 255.255.255.255 outside
SSH SITE2 - ASA 255.255.255.255 outside
SSH SITE1 - ASA 255.255.255.255 outside
SSH 0.0.0.0 0.0.0.0 INTERNAL
SSH 0.0.0.0 0.0.0.0 COMMENTS
SSH timeout 60
Console timeout 0
access to the INTERNAL administration
Hello to tunnel L2TP 100
interface ID client DHCP-client to the outside
dhcpd dns 4.2.2.1 4.2.2.2
dhcpd ping_timeout 750
dhcpd outside auto_config
!
address INTERNAL 192.168.10.100 dhcpd - 192.168.10.200
dhcpd Apollo Odyssey interface INTERNAL dns
dhcpd somewhere.com domain INTERNAL interface
interface of dhcpd option 150 ip 10.1.1.40 INTERNAL
enable dhcpd INTERNAL
!
dhcpd address 192.168.2.100 - 192.168.2.200 COMMENTS
dhcpd dns 4.2.2.1 4.2.2.2 interface COMMENTS
enable dhcpd COMMENTS
!a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
NTP server 192.43.244.18 prefer external source
WebVPN
allow outside
CSD image disk0:/securedesktop-asa-3.4.2048.pkg
SVC disk0:/sslclient-win-1.1.4.179.pkg 1 image
SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 2 image
enable SVC
Group Policy DefaultRAGroup INTERNAL
attributes of Group Policy DefaultRAGroup
Server DNS 192.168.10.4 value
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.com
Group Policy DefaultWEBVPNGroup INTERNAL
attributes of Group Policy DefaultWEBVPNGroup
VPN-tunnel-Protocol webvpn
Group Policy DefaultL2LGroup INTERNAL
attributes of Group Policy DefaultL2LGroup
Protocol-tunnel-VPN IPSec l2tp ipsec
Group Policy DefaultACVPNGroup INTERNAL
attributes of Group Policy DefaultACVPNGroup
VPN-tunnel-Protocol svc
attributes of Group Policy DfltGrpPolicy
value of 192.168.10.4 DNS Server 4.2.2.2
VPN - 25 simultaneous connections
VPN-idle-timeout no
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.com
the value INTERNAL VPN address pools
chip-removal-disconnect disable card
WebVPN
SVC keepalive no
client of dpd-interval SVC no
dpd-interval SVC bridge no
value of customization DfltCustomization
attributes global-tunnel-group DefaultRAGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultRAGroup
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key *.
Disable ISAKMP keepalive
tunnel-group DefaultRAGroup ppp-attributes
No chap authentication
no authentication ms-chap-v1
ms-chap-v2 authentication
attributes global-tunnel-group DefaultWEBVPNGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultWEBVPNGroup
tunnel-group 123.234.8.60 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.60
pre-shared-key *.
tunnel-group 123.234.8.124 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.124
pre-shared-key *.
tunnel-group 123.234.8.189 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.189
pre-shared-key *.
type tunnel-group DefaultACVPNGroup remote access
attributes global-tunnel-group DefaultACVPNGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultACVPNGroup
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the http
inspect the they
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:423c807c0d63cb3e9aeceda977053f84
: end
ASDM image disk0: / asdm - 623.bin
ASDM location Camille 255.255.255.255 INTERNAL
ASDM location INTERNAL CGT-external 255.255.255.255
ASDM location INTERNAL SITE1-LAN 255.255.0.0
ASDM location INTERNAL SITE2-LAN 255.255.0.0
ASDM location INTERNAL training3-LAN 255.255.0.0
ASDM location INTERNAL training3 - ASA 255.255.255.255
ASDM location INTERNAL GDO 255.255.255.255
ASDM location INTERNAL SITE1 - ASA 255.255.255.255
ASDM location INTERNAL SITE2 - ASA 255.255.255.255
ASDM location INTERNAL training3-VOICE 255.255.0.0
ASDM location puppy 255.255.255.255 INTERNAL
enable ASDM historyI should also mention that my test clients are a combination of Windows XP, Windows 7, and Windows Mobile. Other that in specifying the preshared key and forcing L2TP/IPsec on the client side, the VPN settings on clients are the default settings with the help of MS-CHAP/MS-CHAPv2.
You must configure * intercept-dhcp enable * in your group strategy:
attributes of Group Policy DefaultRAGroup
attributes of Group Policy DefaultRAGroup
Server DNS 192.168.10.4 value
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.comIntercept-dhcp enable
-Latptop VPN clients (which I assume are on windows computers) is also the * use on remote network default gateway * box unchecked. It is located on the Advanced tab of VPN client TCP/IP properties. Select Client VPN > properties > Networking > TCP/IP Internet Protocol > properties > advanced and uncheck the box.
Alex
-
Hello everyone
I have setup a VPN connection, which I can connect to. For all customers of connection, I want to give them an IP (from a subnet maybe) and let them use this IP address for all that they do.
Therefore, this:
and not current:
My inside is 192.168.1.0
My VPN IP pool is 192.168.30.5 - 200
My server (DNS, files, Web site) is 192.168.1.222Here's my setup. I scored what I thought might have something to do with it:
ASA Version 9.2 (1)
!
ciscoasa hostname
activate 8Ry2YjIyt7RRXU24 encrypted password
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
2KFQnbNIdI.2KYOU encrypted passwd
names of
pool of IP local IP-pool 192.168.30.5 - 192.168.30.200 mask 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.253 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
boot system Disk0: / asa921 - k8.bin
passive FTP mode
permit same-security-traffic intra-interface
network obj_any object
subnet 0.0.0.0 0.0.0.0
network of the object Server-25
Home 192.168.1.222
Description of the test server
network of the object server-80
Home 192.168.1.222
Description of the test server
network of the object server-443
Home 192.168.1.222
Description of the test server
network of the object server-2525
Home 192.168.1.222
Description of the test server
network of the object server-993
Home 192.168.1.222
Description of the test server
network of the object server-6001
Home 192.168.1.222
Description of the test server
network of the object server-6002
Home 192.168.1.222
Description of the test server
network of the object server-6003
Home 192.168.1.222
Description of the test server
network of the object server-6004
Home 192.168.1.222
Description of the test server
network of the VPN HOST object
192.168.30.0 subnet 255.255.255.0
the object to the Interior-net network
host 192.168.1.0
the VPN server object network
Home 192.168.1.222
outside_access_in list extended access permit tcp any object Server-25 eq smtp
outside_access_in list extended access permit tcp any object server-2525 2525 eq
outside_access_in list extended access permit tcp any object server-80 eq www
outside_access_in list extended access permit tcp any object server-443 https eq
outside_access_in list extended access permit tcp any object server-993 993 eq
outside_access_in list extended access permit tcp any object server-6001 eq 6001
outside_access_in list extended access permit tcp any object server-6002 6002 eq
outside_access_in list extended access permit tcp any object server-6003 eq 6003
outside_access_in list extended access permit tcp any object server-6004 eq 6004
outside_access_in to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.30.0 255.255.255.0
permit access-list Split-Tunnel-ACL standard 192.168.30.0 255.255.255.0
no pager
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 721.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (indoor, outdoor) Interior-net Interior-NET static source static destination HOST-VPN-VPN-HOST
NAT VPN VPN-server destination (indoor, outdoor) static static source HOST-VPN-VPN-HOST
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
network of the object Server-25
NAT (inside, outside) interface static tcp smtp smtp service
network of the object server-80
NAT (inside, outside) interface static tcp www www service
network of the object server-443
NAT (inside, outside) interface static tcp https https service
network of the object server-2525
NAT (inside, outside) interface static 2525 2525 tcp service
network of the object server-993
NAT (inside, outside) interface static tcp 993 993 service
network of the object server-6001
NAT (inside, outside) interface static tcp 6001 6001 service
network of the object server-6002
NAT (inside, outside) interface static tcp 6002 6002 service
network of the object server-6003
NAT (inside, outside) interface static 6003 6003 tcp service
network of the object server-6004
NAT (inside, outside) interface static service tcp 6004 6004
Access-group outside_access_in in interface outside
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
RADIUS AAA server HSS-auth-server protocol
allow only
AAA-server HSS-auth-server (inside) host 192.168.1.222
Timeout 5
key *.
identity of the user by default-domain LOCAL
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
trustpool crypto ca policy
Crypto isakmp nat-traversal 30
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0interface ID client DHCP-client to the outside
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
internal HSSvpn group strategy
attributes of Group Policy HSSvpn
value of server WINS 192.168.1.222
value of server DNS 192.168.1.222
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelall
Split-tunnel-network-list value Split-Tunnel-ACL
HSS.dk value by default-field
activate dns split-tunnel-all
type tunnel-group HSSvpn remote access
attributes global-tunnel-group HSSvpn
address IP-pool pool
HSS-auth-server authentication-server-group
Group Policy - by default-HSSvpn
password-management
IPSec-attributes tunnel-group HSSvpn
IKEv1 pre-shared-key *.
tunnel-group HSSvpn ppp-attributes
No chap authentication
no authentication ms-chap-v1
ms-chap-v2 authentication
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:c85ff8bf61669bef56b4dad704a4930a
: endHello
Change Split Tunnel VPN in full Tunnel VPN, you have really do much in your configuration.
Seems that have already changed you the 'tunnelspecified' 'tunnelall' in configurations of the 'group policy' . You can delete the setup but that defines the ACL of Split Tunnel
attributes of Group Policy HSSvpn
No split-tunnel-network-list value Split-Tunnel-ACLSeems that you use an internal AAA server to manage authentication rather than on the SAA. I guess if you want to assign a specific IP address for VPN user/username, then it must be done on the side Server?
If you had the "username" on the SAA configurations you can set it up under its framework which "username" IP address gets when he or she connects with the VPN Client.
As naturally as you start using the complete Tunnel and all traffic from the VPN Client starts to get in the tunnel to the ASA you will need a NAT for VPN Client users Internet traffic. You can configure this NAT like this for example:
network of the VPN-POOL object
192.168.30.0 subnet 255.255.255.0interface of VPN-POOL dynamic NAT (outside, outside) after auto source
Note that this is a manual of NAT / double NAT statement real "nat" IS NOT inserted under the 'object' , but the 'object' is rather created it can be used in the "nat" command. I see that your other dynamic PAT configurations are configured with NAT Auto / object NAT network. You can do this like that too if you wish. Personally I do like that.
But as I said before, it seems that you have already configured the VPN to be full of Tunnel. It is perhaps not as it is? While it is connected with VPN, you should be able to check the secure routes (or something like that) section to see if it says "0.0.0.0" If Yes, then it should be tunneling all traffic.
Hope this helps :)
-Jouni
-
Cisco easy VPN access Internet without Split Tunnel
Hey guys
IM wondering if anyone has a config that can help me get access to internet via an easy vpn tunnel on a cisco 877 router.
Basically, we are traveling to be users able to use the internet through vpn, rather than using split tunneling. The reason for this is that we have several sites that are attached by lists of external IP access for some services.
We hope that mobile users to interact with these sites through the central router and use external IP of access routers secure sites.
I hope that makes sense. I know that we can use a proxy but we also use other services of bases no proxy on these sites, it would be rather routed direct access.
Thank you
Luke
Hi Luke,.
Please use the installation of the client VPN (complete tunnel) link below.
Note the useful message.
Thank you
Kasi
-
Impossible to access them Internert through the split tunneling VPN client.
I divided tunnel configured on a PIX 515. The remote VPN client connects to the PIX very well and can ping hosts on the internal network, but cannot access the Internet. Am I missing something? My config as shown below.
In addition, I don't see the routes on the VPN client via statistics (screenshot below)
All opinions are appreciated.
Rob
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
8.0 (3) version PIX
!
hostname PIX-to-250
enable the encrypted password xxxxx
names of
!
interface Ethernet0
nameif outside
security-level 0
IP address x.x.x.250 255.255.255.240
!
interface Ethernet1
nameif inside
security-level 100
IP 192.168.9.1 255.255.255.0
!
XXXXX encrypted passwd
passive FTP mode
DNS domain-lookup outside
DNS server-group Ext_DNS
Server name 194.72.6.57
Server name 194.73.82.242
the LOCAL_LAN object-group network
object-network 192.168.9.0 255.255.255.0
object-network 192.168.88.0 255.255.255.0
Internet_Services tcp service object-group
port-object eq www
area of port-object eq
EQ object of the https port
port-object eq ftp
EQ object of port 8080
port-object eq telnet
the WAN_Network object-group network
object-network 192.168.200.0 255.255.255.0
ACLOUT list extended access allowed object-group LOCAL_LAN udp any eq log field
ACLOUT list extended access allow icmp object-group LOCAL_LAN no matter what paper
ACLOUT list extended access permitted tcp object-group LOCAL_LAN connect to any object-group Internet_Services
access-list extended ACLIN all permit icmp any what newspaper echo-reply
access-list extended ACLIN all permit icmp any how inaccessible journal
access-list extended ACLIN allowed icmp no matter what newspaper has exceeded the time
Comment by split_tunnel_list-LAN Local access list
split_tunnel_list list standard access allowed 192.168.9.0 255.255.255.0
access-list extended SHEEP allowed object-group ip LOCAL_LAN 192.168.100.0 255.255.255.0
pager lines 24
Enable logging
Outside 1500 MTU
Within 1500 MTU
IP local pool testvpn 192.168.100.1 - 192.168.100.99
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list SHEEP
NAT (inside) 1 0.0.0.0 0.0.0.0
Access-group ACLIN in interface outside
ACLOUT access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 195.171.252.45 1
Route inside 192.168.88.0 255.255.255.0 192.168.88.254 1
Route inside 192.168.199.0 255.255.255.0 192.168.199.254 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac Set_1
Crypto-map dynamic outside_dyn_map 10 game of transformation-Set_1
life together - the association of security crypto dynamic-map outside_dyn_map 10 seconds 280000
Crypto-map dynamic outside_dyn_map 10 the value reverse-road
outside_map 10 card crypto ipsec-isakmp dynamic outside_dyn_map
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 43200
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
internal testvpn group policy
attributes of the strategy of group testvpn
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
name of user testuser encrypted password xxxxxx
type tunnel-group testvpn remote access
tunnel-group testvpn General-attributes
address testvpn pool
Group Policy - by default-testvpn
testvpn group of tunnel ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:5dcb5dcdff277e1765a9a0c366b88b9e
: end
# 250 A - PIX
You have not assigned the ACL split tunnel to your strategy.
PLS, configure the following:
attributes of the strategy of group testvpn
value of Split-tunnel-network-list split_tunnel_list
-
VPN, Internet and a Split Tunnels traffic
Please attached photo because I hope that explains what I really want to do, but here's the break down.
When a VPN Client connects to remote access to 1-ASA5510 I want all Internet traffic to send to 2 - ASA5510 instead of back to the default route. When it comes out 2-ASA5510, it passes through the content filter. 2 - ASA5510 has Split Tunnel put in place and we are trying to do away with Tunnel from SPlit.
I hope this is clear enough.
Any ideas would be helpful
Dan
Dan,
Difficult but doable! First of all, there is a nice feature in the ASA that allows configuration of remote proxy based on VPN profile by: -.
Group Policy <> attributes
use a MSIE-proxy-server method
Internet Explorer-proxy server value x.x.x.x
activate Internet Explorer-proxy local-bypass
Well Yes you guessed it - works only on Microsoft Internet Explorer.
I don't think that any policy based routing would work for you - bad luck.
But you can try another feature - traffic through the tunnel, which is normally used in the topllogy of EasyVPN: -.
Configuration of the ASA at the bottom, I probably would test this with the IP address of the 2651 router!
HTH.
-
Problems with basic setup and split tunneling VPN
I created a SSL VPN in an ASA CISCO ASDM 6.6 8.6 running.
IM able to connect to the VPN and reach all the devices with the LAN but I am not able to browse the web. When I activate the tunnel split Im able to browse the web, but then Im not able to reach any internal device.
Here is part of the show's run:network of the RedInterna object
150.211.101.0 subnet 255.255.255.0
Description Red Interna
network of the NETWORK_OBJ_10.4.1.0_28 object
subnet 10.4.1.0 255.255.255.240
inside_access_in list extended access permitted ip object RedInterna all
Standard access list VPN_INTERNET allow 150.211.101.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
management of MTU 1500
local pool VPN_POOL 10.4.1.1 - 10.4.1.14 255.255.255.240 IP mask
failover
secondary failover lan unit
failover lan interface GigabitEthernet0 fail-1/2
key changeover *.
failover interface ip fail-1 10.3.1.21 255.255.255.252 watch 10.3.1.22
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 66114.bin
enable ASDM history
ARP timeout 14400
NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.4.1.0_28 NETWORK_OBJ_10.4.1.0_28 non-proxy-arp-search to itinerary
!
NAT source auto after (indoor, outdoor) dynamic one interface
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 187.217.68.145 1
Route inside 10.0.0.0 255.0.0.0 10.1.1.78 1
Route inside 150.211.0.0 255.255.0.0 10.1.1.78 1WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-3.1.00495-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
internal GroupPolicy_VPN_ group strategy
attributes of Group Policy GroupPolicy_VPN_
WINS server no
value of server DNS 8.8.8.8
client ssl-VPN-tunnel-Protocol
dominio.com.MX value by default-field
type tunnel-group VPN_ remote access
attributes global-tunnel-group VPN_
address VPN_POOL pool
Group Policy - by default-GroupPolicy_VPN_
tunnel-group VPN_ webvpn-attributes
enable VPN_ group-alias
!I m don't know if Im missing a few small details or Setup. Any help will be much appreciated.
Thank you!!!Hello
When you use full VPN Tunnel (which is the default setting), you will have a number of things that you need to configure on the SAA.
First, the ASA by default will not allow traffic to enter via an interface and then exit through the same interface. It is essentially, what happens when the customer VPN traffic comes to the ASA and then heads on the Internet. In your case the traffic goes through the 'outside' and leaves via the 'outside' interface.
You will need this command
permit same-security-traffic intra-interface
You can check if their licence at the moment with the command
See the race same-security-traffic
Second, VPN users will need to have the NAT configuration like all users LAN behind the ASA real. So you basically configure dynamic PAT for 'outside' to 'outside' traffic
You can get there with the following configuration
network of the VPN-PAT object
subnet 10.4.1.0 255.255.255.240
dynamic NAT interface (outdoors, outdoor)
I suppose it should do for you to be able to connect to the Internet and the LAN when the VPN is active.
Hope this helps
Let me know how it goes.
-Jouni
-
Split tunneling VPN site-to-site
Dear all,
I have two ASA 5510 with VPN site-to-site, I can send all Internet traffic to the central site (HQ),
How to set the split tunneling to access Campus LAN (192.168.2.0/24) of LAN2.
Thank you in advance.
Best regards
Zoltan
You can have 'decline' instruction on your ACL crypto and he will deviate the traffic is encrypted to the site-to-site VPN tunnel.
For ASA 1:
access-list extended 100 permit ip 10.10.16.192 255.255.255.192 10.10.16.128 255.255.255.192
access-list extended 100 permit ip 10.0.0.0 255.0.0.0 10.10.16.128 255.255.255.192
access-list extended 100 deny ip 192.168.2.0 255.255.255.0 10.10.16.128 255.255.255.192
access-list extended 100 permit ip any 10.10.16.128 255.255.255.192
For ASA 2:
access-list extended 100 permit ip 10.10.16.128 255.255.255.192 10.10.16.192 255.255.255.192
access-list extended 100 permit ip 10.10.16.128 255.255.255.192 10.0.0.0 255.0.0.0
access-list extended 100 deny ip 10.10.16.128 255.255.255.192 192.168.2.0 255.255.255.0
access-list extended 100 permit ip 10.10.16.128 255.255.255.192 all
Hope that helps.
-
Best Soho - Split Tunnel VPN router
Hi - I'm looking for some advice for a soho router.
Basically the main feature, I'm looking for is to run, which I think is a VPN split tunnel, so that all internal clients route default traffic out to the gateway of the ISP. However, if the traffic is destined for a list of several specific subnets (x.x.x.x/24, y.y.y.y/24 etc.), then it should establish a tunnel to an only PPTP/IPSEC host and route remote traffic for these subnets via the tunnel. To be clear, that these subnets (x.x.x.x and y.y.y.y) is not attached to the end of the tunnel - which is a gateway device that will route them further.
I've been watching the various VPN router offers and is not clear to me if I can do it with a RV - 042, BEFVP41 or something like the other thing SRP521W I must be able to manipulate the routing tables directly on.
As an additional note, I have complete control over the end of SOHO - but simply an account at the end of the tunnel with (it is a service provider). The idea is to use public services for 90% of the traffic, but if customers want to access a specific set of addresses, it will forward this specific traffic through the tunnel.
Thanks in advance...
On current view, do not touch the RPS with a bargepole.
Adding access to additional subnets through a VPN tunnel is pretty standard, routing will be automatic if the VPN was established, but you must ensure that
1. politics VPN at BOTH ENDS allows your local subnet to access these networks
2. your subnet is not incompatible with other subnets or roads that can be used on remote networks
3. assuming you're OK so far, remote subnets must have a route is added to the default gateway to point to your subnet via intermediate networks
Good luck!
-
iPad App AnyConnect and Webproxy without Split Tunneling
Hello
Is it possible to use a web proxy server to make iPad VPN SSL connections to use an internal navigation proxy server when connected. Split tunneling is not allowed, but I want to allow users to be able to browse the internet through our internal proxy.
Is there a solution for this?
Thank you
You can look in the Internet EXPLORER on the SAA proxy feature which will allow you to set values of dynamic proxy for AnyConnect connection customers. This feature was originally designed for IE but has been tested to work with the iPhone and iPod Touch 4.1.
Todd
-
Please help, unidentified network, Internet access without problem...
Hello world...
I have a Toshiba Satellite C850 performer windows 8 64-bit, and it was working fine, suddenly the wifi doesn't connect now and said internet access, when I press on troubleshoot it says "wifi is not a valid IP configuration", and also tried to connect through a LAN cable, it does not either, but other laptops and mobile phones perfectly connects to the network It happened after I installed Skype. !!! I know it's a coincidence, but thought I should say...
I tried to disable the two network adapters, forget network then connection, tried to remove the 'Hello' in the firewall, but I was not even have Hello... I'm going crazy with her...
I tried to disable the firewall, anti-virus uninstall, I got avast, I tried to disable IPv6.
tried these commands cmd
netsh winsock reset catalog
netsh int ip reset reset.log hit
ipconfig/flushdns
He said
«"«reset the interface...»»» Ok!
"something that I don't remember now" reset OK!
reset failed
Access is denied«' There is no user specified parameters to be re-armed»»»
Although I chose command prompt (admin)...
also tried
ipconfig/release
ipconfig/renew
It was the result
Although I was connected at this time...
Tried another router wifi at home with my brother, with no other connected devices but this win8 one, didn't work either...
Tried to boot into "Safe Mode with network" no longer works...
I tried to uninstall the driver and install the last, also did not work,
I also disabled the (avast NDSI firewall driver) and the (avast firewall driver), didn't work...
This is the screenshot of the ipconfig/all command
I tried to take the IP address and the subnet mask and default gateway and DNS servers, since a working laptop and enter manually on this laptop from win8 but did not work, but now there is no 'limited access and no yellow triangle', but still no internet connectivity...
Here are a few screenshots:
My network is the first...
and ALL this applies for WiFi AND cable LAN, and also I tried to connect my Samsung galaxy phone and tried 3 G connect via it's also did not work, but it used to work before the problem
HEEEEEEEELP PLEEEEEEEEAAAAAAAAAASE...
Hello
Please contact Microsoft Community.
We appreciate your efforts and the provision of information in detail about the issue. As you have already tried some troubleshooting and your computer still does not connect to the internet. I suggest you to consult the article below and check if it helps.
How to refresh, reset or restore your PC;
Warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.
http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC
Important: refer to the section "restore your PC to an earlier point in time."
Note: Try to restore your system to an earlier date when everything worked correctly.
Meet us, then we can help you further.
-
Problem with route on PC with split tunnel VPN
Hi all
I have the following situation:
ASA 5515 X 8.6 running
I have several inside sub interfaces:
.10 = 192.168.10.124
.11 = 192.168.11.124
.12 = 192.168.12.1/24
.13 = 192.168.13.1/24
.14 = 192.168.14.1/24
Now, I want to implement a VPN IPSec remote access:
I attribute the range 192.168.99.5 to 192.168.99.50 for VPN clients.
I have configured the tunneling split for the following networks: 192.168.10.0, 192.168.11.0 and 192.168.12.0
They are also exempt from NAT.
So the config looks good.
The VPN is in place.
However, when connecting to the VPN, none of these networks are available.
After troubleshooting, I discovered the following:
Received my card VPN IP address is 192.168.99.5 (as expected)
However, when I make a copy of the itinerary, I see the following:
Destination netmask gateway interface
192.168.10.0 255.255.255.0 192.168.99.1 192.168.99.5
192.168.11.0 255.255.255.0 192.168.99.1 192.168.99.5
192.168.12.0 255.255.255.0 192.168.99.1 192.168.99.5
The entry door to the routing of my PC table is pointing to a non-existent address, in my opinion it schould be on the same address as my adapter VPN (192.168.99.5).
I tried this with annyconnect and the classic VPN client.
Where I'm going wrong?
No, this ip pointing 192.168.99.1 route is correct. It is not the cause of the problem.
-
Blocks VIRTUAL local network access to a tunnel VPN IPSec on WRV200?
I have two identical WRV200 wireless routers which are connected by a VPN IPSec tunnel. This goes to my LAN LAN of my parents. Everything works well.
But I also have my WRV200 configured for two VLANS. Vlan1 for my network and secure wireless access. VLAN2 for a WiFi not secure for customers.
My problem is that my guest on VLAN2 slips through the VPN devices and access on LAN of my parents. I'm looking for a way to block to do this.
I use the version of the software on the two routers (v1.0.39).
For what it's worth, I know that my receive an IP address in the range 192.168.x.101 DHCP - 199. I could assign a different range if that helps. I thought that I could block this beach on the remote router firewall, but I see there is blocking a single IP address at the time, maximum of 8. Am I missing something?
Or could I put something weird in the routing tables somewhere to get the IPs guest out of lala land?
Any suggestions are appreciated. I can't be the only one in this boat.
Steve
Try to check local and remote, vpn under safe group settings if you change the ip address range subnet. Don't include the range of ip addresses of the computers wireless comments so that it will not pass through the vpn tunnel. If there is no ip range option, you must to the subnet of the network in order to control the ip address you want to allow on the vpn tunnel.
-
Unable to connect to the Internet after connecting to a VPN server.
As soon as I connect to the VPN, I can't access the Web or e-mail.
An article published by Microsoft Support to http://support.microsoft.com/kb/317025 seems to refer to the same problem. However, it is for Win 2000 and NT platforms, not XP. The problem seems to be due to the VPN connection (being configured) to use the default gateway on the remote network.
Issues related to the:
- The problem indeed because the VPN connection is configured to use the default gateway on the remote network?
- If so, a) how can I know if it's like my VPN connection is configured and b) how I set up so I can use VPN to the network remotely and still being able to use internet locally?
Thank you.
Realize that the VPN is intended to establish a secure connection to a remote network via a public internet. Allowing a client computer at the same time secure access that a secure network and a public network may pose a risk to data leaks out of the network security in the public internet. If "split tunneling" VPN server controls is allowed on a client computer. If allowed by the side of the VPN server, the client computer accesses the VPN and the internet by unchecking the 'use Gateway on the remote network' box. For more information:
"Split Tunneling for concurrent access to the Internet and an Intranet"
<>http://TechNet.Microsoft.com/en-us/library/bb878117.aspx >HTH,
JW -
Access remote VPN, no split tunneling, internet access. Translation NAT problem
Hi all, I'm new to the forum. I have a Cisco ASA 5505 with confusing (to me) question NAT.
Unique external IP (outside interface) with several translations of NAT static object to allow the redirection of port of various internal devices. The configuration worked smoothly during the past years.
Recently, I configured a without the split tunneling VPN remote access and access to the internet and noticed yesterday that my port forwarding has stopped working.
I reviewed the new rules for the VPN NAT and found the culprit.
I've been reviewing the rules again and again, and all I can think about and interpret it, I don't know how this rule affects the port forwarding on the device or how to fix.
Here's the NAT rules, I have in place: ('inactive' rule is the culprit. Once I have turn on this rule, the port forwarding hits a wall)
NAT (inside, outside) static source any any static destination VPN_Subnet VPN_Subnet non-proxy-arp-search to itinerary
NAT (outside, outside) static source VPN_Subnet VPN_Subnet VPN_Subnet VPN_Subnet non-proxy-arp-search of route static destination
NAT (outside, outside) source VPN_Subnet dynamic interface inactive
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
network of the XXX_HTTP object
NAT (inside, outside) interface static tcp www www service
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1Any help would be appreciated.
Try changing the nat rule to VPN_Subnet interface of nat (outside, outside) the after-service automatic dynamic source
With respect,
Safwan
Maybe you are looking for
-
Re: How to use the webcam on my C50-A-19U Satellite?
I don't know how to use the webcam on my Satellite C50-A-19U.Help, please. Message was edited: assignment has been translated
-
DCR-TRV19 transfer on Windows7
I just upgraded to a Windows 7 computer and cannot do recognize my Sony DCR-TRV19 handycam for video transfer. (I have an i.link cable). I searched the Sony site and found that no driver did not have to do this. Is there a way to address this issue?
-
My battery stops at 80% load, how do I get him back to 100%?
Hello worldMy laptop is new, and everything works fine with it. All I can remember is earlier I clicked on an option which allow me to charge the battery up to 80 per cent, while the battery lasts longer.I want to move to 100% load, but I just forgot
-
I uninstalled my printer Dell because of printing problems (problem of subspooler and was unable to delete the document that was sent to print). When I reinstalled the printer, I was able to print but when I try to scan to the computer, the printer
-
No Internet unless I reboot after initial start-up
My new Inspiron 3059 AIO connected to the internet just fine at the beginning. But for the last few days I had a problem when I start the morning for the first time the network icon will be a little asterisk next to him, and when I open the browser,