video loading

Similar Questions

• Some readers video loading but I can't play button pless, what is the problem?

  Some videos that I realize in general ceased to function properly.

  http://www.narutoget.com/watch/1101-Naruto-Shippuden-episode-327/

  The first 3 tabs of these I used to be able to play, now the page load, charge downloads of video, even, but I can press Play for some reason any.

  I have deleted the cookies, cache, reinstalled flash and restore the settings of firefox, but that doesn't seem to help
  I searched the forums pages and help but can't find anything that helps.
  Orientation any help is appreciated, I can even upload a screenshot.

  So after the days of playing with it, I finally figured it out. I had to create a new profile and it works perfectly...

  She must have been a setting somewhere... so much worse, I still have no idea where or what he did stop working.

• HP Pavilion g7: gel g7 HP Pavilion at the game and video, loading screens

  So, he started like 3 months ago when I got my laptop back from repairs. I wanted to play a game (Splinter Cell: Conviction) via Steam. I turned on the game and saw the intro, but with no sound. Then, it turned out to be black. I waited 2 minutes before it loads. He loaded, fortunately. But then, when I started to play the game, it happens again. A mission has been loading and I could see the game loading icon, but for 3 minutes. When the game started, it was OK. But then, in a cutscene, it happened again. I saw the picture of the main protagonist, but no video or sound. This has happened in each cutscene and loading screen. Even when I'm dead in the game, it happened. Almost all of my games on Steam to do this (Splinter Cell: Conviction, Batman: AA, Injustice). On the other hand, there are few games that don't do this (the origins of Batman Arkham, Splinter Cell: Blacklist, Batman: Arkham City).

  Two months earlier, the problem to grow. Even videos on Youtube and all the other video portals are the same thing. I see the screen on a video and the videos on the right, but the video does not play. I have to wait 2 minutes until it loads. Every single video. He then starts, plays and plays. But, when I stop in the middle (anywhere) and then want to watch further, the loading is here again. It takes again like 2-3 minutes.

  But the worst is the multiplayer games. I have it be based on Payday: The Heist. Let's say I made a lobby for other people to participate. Then I press "start the game". The loading screen strikes again. All the players in my lobby connection let go me. When I join a game of others, I play like a minute, and then it happens again. It stucks (I can hear the soundtrack) and then told me that I lost the connection to the host. Some games do not have this (Minecraft, Portal 2), but some do (Payday: The Heist, Batman: Arkham origins). There is no connection problems, my brother has a PC and its internet connection in these games is perfect.

  When I want to open a file, it's OK. Opening files is not a problem.

  When I tried to think about it, I thought that the problem is in the sound. Thus, in Splinter Cell: Conviction, I tried something. Every time there is a loading screen, I turned the sound on my laptop. The screen was completely normal, loading took only 5 seconds. I was very happy, but when I tried a second time, it did not work. And third, fourth, fifth...

  Currently, the problem gets bigger. I can't read some of my favorite games of co - op and etc. The loading is very annoying. I'll be very happy if a solution will be found.

  Sorry for my English, I am from Czech Republic.

  Hi @Thomas_Ber ,

  Thank you for visiting the Forums HP's Support and welcome. I saw your question about your HP Pavilion Notebook g7 and the problem with the speed. Here's a document on improving your system.

  Make sure that all updates are completed within the control panel or click the Windows key and start typing the laptop settings, then go to update.

  You could try a refresh of Windows 8. Please read the entire document before performing. This could restore all the settings on the PC.

  Here is a link to faq support with steam. They might have a solution to this problem.

  Please let me know how it goes.

  Thank you.

• When my Windows movie maker video loading, it will load only 11 seconds of a video of 5 minutes.

  I'm doing a video.  The video is Mpeg-2.  It's a little more than 5 minutes.  I tried several times to load the video but whenever he played only 11 seconds.  Whenever I play the video through windows media player, it will play the entire video.  Help, please!

  I'm doing a video.  The video is Mpeg-2.  It's a little more than 5 minutes.  I tried several times to load the video but whenever he played only 11 seconds.  Whenever I play the video through windows media player, it will play the entire video.  Help, please!

  ==================================
  Movie Maker has problems of compatibility with the MPEG files...
  It may be interesting to try to convert the file to the. WMV
  format before you import into Movie Maker.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I have Vista Home premium. My DVD Maker crashes after the video load iI. Can I reinstall DVD Maker without a complete reinstall of Vista?

  I have a Compaq laptop with Vista Home Premium and when I use DVD maker, what it crashes once I have load video to it.  I can't choose a menu style or burn the DVD. My question is what can I do to fix this?  Can I reload my Vista disk maker DVD, or what I need to do a complete reinstall of Vista?  Any help would be appreciated

  This happens on all video formats? The file in question is not compatible with the DVD Maker.

  Also... Open Movie Maker and go to... Tools / Options / Compatibility tab and disable all filters / OK...
  Now try to re-import in creation of DVD.

• Video loading on 5310 MCU (via XML - RPC)

  Hello.

  I am trying to create a script for Nagios monitoring monitor the use of the video ports on my 5310 MCU (software version 4.4).

  I found an example of a perl using RPC::XML scipt and it works quiet well except for one thing: I have no video support.

  I used the "device.health.query" method, which should include a member named "videoLoad" (an allusion to Cisco TelePresence MCU API 2.10 Guide).

  I get a correct result of this method, but there are some missing members.

  Here is the result:

  rtcBatteryStatus

  Ok

  operationalStatus

  assets

  voltagesStatusWorst

  Ok

  fanStatusWorst

  Ok

  temperatureStatusWorst

  Ok

  temperatureStatus

  Ok

  mediaLoad

  1

  voltagesStatus

  Ok

  fanStatus

  Ok

  cpuLoad

  0

  rtcBatteryStatusWorst

  Ok

  There is no «videoLoad» Member

  Is that what I got wrong, or do I have to activate something on the MCU?

  Is there another way to get the load of the video of the MCU (such as SNMP or sth)?

  Kind regards

  Sven Lindeke

  HELLO Sven.  Thus, it seems that the platform of the 5300 series will not return these values as the old platforms.  VideoLoad and audioLoad return values have been deleted because they were reporting incorrect information from this platform works mixed audio and video DSP unlike older models of MCU.

  The only options I see here:

  (1) run a script to extract the status data > conferences page.
  (2) to invest in the conductor and request a conductor for audio and video ports in use.
  (3) account team push to drive above CDETS for call API to draw the status information > conferences page.
  (4) put in place a script to subscribe to and then listen to the events of feedback - see page 18 of the http://www.cisco.com/en/US/docs/telepresence/infrastructure/mcu/api_guide/MCU_API_2-10.pdf
  May be able to count participants join and leave this way maybe.

  I know that doesn't help you now, but only four methods I can recommend at this time.

  VR
  Patrick

• Video loading extended canvas

  So, after a lot of research here I see that the only way to load a video is using the dom manipulation and creating a tag video. And I'm assuming that use CSS to position on your canvas, as if it were part of it.

  Source: How to load the video in Html5 Canvas?

  My other questions include, this work for the addition of let's say a youtube video? I think that Yes cause you're just manipulation of the dom.

  Second and more important issue how to differentiate the code which will work out cloth vs Flash? Is there like a documentation on the reference of the canvas code?

  How can I just write in javascript, and everything will be fine?

  If you work in a HTML5 Canvas and WebGL FLA, you can use Javascript. If you work in an AS3 FLA, you can use ActionScript. If you convert a type to another, the code gets commented on.

• Record h.264 video, load StageWebView

  is it possible to load a video and save it in the file system

  then charge back in and read it in stageWebView?

  When I load the recorded video, it is as a byteArray.

  Hello

  Assuming you have access to raw bytes (it would be better if you receive data in an asynchronous way) I think you could certainly save data in the repository app (it is in sandbox data application on iOS) in a way like:

  var file:File = File.applicationStorageDirectory.resolvePath ("myVideo.mp4");

  Open FileStream, then write that data happens (or all at once).

  Once you have this file, you can:

  -load directly as shown here:

  http://forums.Adobe.com/message/3694991#3694991

  -load via thin 'html' lodging web page (you'd have to create this thin html page for this file video, both of accommodation):

  http://Sonnati.WordPress.com/2011/04/26/air-2-6-for-iOS-and-video-playback/

  (these two solutions require StageWebView as you noted)

  HTH,

  Kind regards

  Peter

• Stop video loading - is it possible?

  Hi all.

  I did a player web, based on the OSMF framework. Initially, it loads a standard quality video - but the user can then choose get a larger version of the video, using a 'resolution of the switch' - button.

  The problem is that, during the switch, the player continues the clip low resolution - and vice versa. As you can see in the code, I tried different approaches to solve this problem.

  
  So: I need to force the movie to stop loading - and preferably without forcing the player to load. Is this possible?

  Here is the code that takes care of the video:

  public void loadVideo (theURL) {}
  trace ("load video" + theURL);
  If (mediaContainer) {}
  mediaPlayer.stop ();
  videoplaceholder.removeChild (mediaContainer);
  mediaContainer.removeMediaElement (currentMediaElement);
  mediaFactory.removeItem (mediaElement);
  mediaPlayer.media = undefined;
  }
  
  mediaPlayer = new MediaPlayer();
  NAR view' and bliver tilgaengeligt, send da event
  mediaPlayer.addEventListener (MediaPlayerCapabilityChangeEvent.CAN_PLAY_CHANGE, onViewable);
  mediaElement = mediaFactory.createMediaElement (new URLResource (theURL));
  
  layout = new LayoutMetadata();
  Layout.Width = playerdimensions [0];
  Layout.Height = playerdimensions [1];

  If (! scrubber) {}
  addScrubberAndStuff();
  }

  mediaPlayer.addEventListener (DisplayObjectEvent.MEDIA_SIZE_CHANGE, onDimensionsChange);
  mediaPlayer.addEventListener (TimeEvent.CURRENT_TIME_CHANGE, onCurrentTimeChange);
  mediaPlayer.addEventListener (TimeEvent.COMPLETE, videoHasEnded);
  mediaPlayer.media = mediaElement;

  }

  Best regards

  Anders

  Okay, it looks like you will create a second instance of MediaPlayer is called the second time loadVideo().  I advise to use a single instance of MediaPlayer, no matter how many different loaded videos.  The loadVideo() method only needs to create the appropriate MediaElement and assign it to MediaPlayer (as well as add it to MediaContainer).

• video loading problem

  Hello

  IM new in the field of flash/as3 and im trying to use a video on my site...

  I've read a lot of tut and I tried many techniques...

  On my computer everything seems to work properly but whenever im loading the files on the server, I can see the video...

  Basiclly I want to do is load a very simple video with the video component - nothing fancy, but not embaded...

  any1 can you please help me and tell me how to do?

  Thank you.

  Just to set the MIME type on the server. If it's a bit old, it has the MIME type specification:

  http://kb2.Adobe.com/CPS/194/tn_19439.html

• Video loading time

  Well, I had a number of videos in my Captivate project. Obviously, they would need time to load. I was wondering if I were to add one a series of questions (maybe three) at the beginning of the project (it would be online), which allow the video to load "backstage", and at the time where people answer questions, the video would be ready to go without any freezes (?). See you soon.

  Ufortunately who wouldn't help because the videos are not downloaded until Captivate actually plays. The default setting for Captivate videos are progressive download and the download does not start until the video is actually scheduled to play in the panel mounting.

  / Michael

  Click here to visit the blog of www.captivate4.com

• iPod 5G with video load cable replacement?

  Can anyone recommend where to buy a replacement cable for an iPod 5th generation w / Video 30 GB?

  I know that it is the former type of charging cable, but I was also sure that there are 2 version of this ' version '. Chargers iPhone 4 do not work properly if my memory is good.

  Model: MA146LL

  Size: 30 GB

  Version: 1.3

  It has a color screen and touchdown.

  Thank you

  You can use two types of '30-pin' USB docking cable that Apple has officially sold as spare parts.  What is the current always sold

  http://www.Apple.com/shop/product/MA591G/C/Apple-30-pin-to-USB-cable

  In the list, under compatibility, product of 5th gen iPod is listed.

  The older type has a larger plastic end of host connector, but the connection point is the same as the new type.  With the older type, you press the sides of the connector to release the hooks.  The new type is held in place by friction and two 'bumps' instead of brackets; Simply pull.

  Third party reputable sources also options work fine.

• When I change a video loaded down in full screen, the video stops often but audio and small screen are when I again switch to full screen it works for a while and can repeat the problem.

  I don't know what I can add

  Hello Bukers,

  Thank you for your message.  Make sure that you have the latest video drivers for your system.  Go to the web site of the manufacturer of your computer and download/install the latest video driver for your device.
  Please let us know if it did or did not solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• DMP-4400 URL command to play the video/load Playlist

  I would like to be able to play a video on the DMP by launching a URL command line to do this.  I did have the chance to find the correct syntax.

  If I go to the DMP Manager-> display Actions-> playback of the media and insert the URL here, he will play immediately on the DMP.  I would like to reproduce this via the URL command line.

  Media is hosted on a DMM system: http://10.41.25.13/content/f208b20d-58ee-499b-ad82-c8f092ad19c7.mpeg

  In addition, this command can be changed to remind a playlist of the DMM instead of just a video?

  Thank you

  OK, I see what you want now.  My link was just to play a video from another web resource.  Try this on a 4400 for your DMM playlist:

  https://: 7777/set_param? init. BROWSER_CMD =http://10.41.25.13:8080 / xTAS-core/api/xml/app/playlist/start_playlist_11...

  And for your presentation of video file:

  https://: 7777/set_param? init. BROWSER_CMD =http://10.41.25.13:8080/xTAS-core/appgen/clad/clad_127_.htm&init.TVZILLA...

  Hope that helps...

  William - Appspace

• Media Player of the window to the bottom of the video loading

  can I download videos with the window for 7 media player window and burn to a DVD to watch on a DVD player if so how if so can explain it in lay s terms or send me a link to mikemonk42@hotmail thanks

  Hi Michael,

  See the following links, they have all the information you have requested.

  Shop online in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/shop-online-in-Windows-Media-Player

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-in/Windows7/getting-started-with-Windows-Media-Player

  Also check out this link:
  Getting started with Windows Media Player

  http://Windows.Microsoft.com/en-in/Windows7/getting-started-with-Windows-Media-Player

  I hope this helps!