Internet access for client computers to sanitation for AV

Similar Questions

• Client VPN prevents internet access from other computers on the network

  Hello.

  I run Client ver 4.6.03.0021 from an office on a network of 11 computers via a hub 16-port. Internet access is through an ICS gateway to the cable modem. Once I changed the modem cable to test a backup and then switched back to the original modem. After this, only computers that have the VPN Client (running or not) could access the internet. Computers that have no customer VPN can access only certain sites. Commonly viewed sites would say "site found. Waiting for answer", but the answer would never come and IE 6.1 cling. When I would try ping sites, it would fail. However, some sites such as Google.com would work.

  On one of the computers, on a whim of head, I installed the VPN Client but have not set up a connection. Now, this computer will connect to any website I want.

  Is there a fix easier to get access to other computers on the network without installing the VPN Client on each of them?

  Thank you

  H. Adams

  Hello

  Looks like you are running in MTU problem. The reason I say it is, automatically reduces the MTU value to 1300 VPN client during the installation for the whole system. That is to say all the client computer installed VPN that have MTU from 1300.

  Try to cut down the MTU of other systems that have no VPN client installed to 1300. If it's a Windows system, you can use Dr. TCP (free).

  Vikas

• No internet access for the connection with the router.

  I bought a router D-Link DSL-2750U and when I connect to the internet it says no internet access even I've updated the MAC address of my router with my ISP, but still no use I use don't win 7. any help on this?

  Hi Chavigny,

  In case you have contacted the ISP provider and verify that the network settings are correct, then try the following steps:

  Method 1:

  I suggest to run the network troubleshooter, and check to see if it lists all the errors and helps you solve them.
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: Update the network driver.

  Steps to update of network driver:

  (a) click the Start button.

  (b) in the search box type devmgmt.msc, and then press ENTER.

  (c) select the network card device and right click on it

  (d) now select Properties.

  (e) in the Properties window, on the driver tab, click Update driver.
  After installing the updates, restart the computer.

  For more information visit: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Please refer to:

  Why can't I connect to the Internet?

  Previous post: the State of the question.

• Internet access for virtual machines in Lab Manager

  Hello

  Our lab environment is configured separately from corporate network and only some public IPs are able to access the internet. How I would install machinery in the Director of the laboratory to access the internet?

  For example, IP range - 64.x.x.x. Creation of a network model with these IP addresses attached to physical networks and external public would give me access to the internet?

  Stan,

  You would have to create a physical network that is attached to a vSwitch or Distributed Switch that can connect to this network of 64.x.x.x.

  If configure you a Pool of IP, Lab Manager can manage physical network IP assignments to the virtual machines.  so if the virtual machines require Internet access, then they will need to access this network (somehow).

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Internet access for PDF Question

  Hello

  I was using IE until an auto update last week. I am now using Firefox. I have a business site I go to full report 'missions '. When I click on the task, it should open the report in the same page. It now opens the report in a new window PDF. I can fill in the report, but when I click 'submit', it's not the case. Save the report and e-mail are not an option because it must be submitted through the system. I have repaired, checked for updates and uninstalled/re-installed adobe reader 11 as well as updated adobe flash. The transition from IE to Firefox was recommended by the support of the company's website. Chrome/Safari are not available options. I've 'activated' module additional adobe in Firefox and allowed access to all sites in the preferences of Adobe. Any suggestions on how to "allow internet access" from the adobe site would be appreciated... Thank you

  WATSON wrote:

  I just changed the tabs of three acrobat adobe applications 'use adobe acrobat (in firefox)' to 'use adobe reader' (default).

  Is it not that which is causing the problem - the PDF does not open in Firefox, but in a separate player window?

• C4580 install disables the XP firewall and internet access for 3 minutes at the start of the PC

  After installing C4580, when I turn on my Dell Inspiron C510m, XP tells me that the firewall is disabled, I can't access to the internet or even my router nor can I use the Applets in Control Panel that could help me sort these things. After 3 minutes, the Firewall WARNING disappears and everything is fine, but none of the updates antivirus and software update checks performed and I have to perform these tasks manually. The printer works fine, but it worries me that this behavior indicates a potential vulnerability - it's like something kept the door open to let the unpleasant things in the computer. Uninstall the HP software solves the problem, and he re - install it reminds me once again. There is something hanging in a HP driver at startup?

  PeterM

  I found the answer to this one, if anyone is interested, even if the solution required a work-around on the way. Suggested HP support I have just uninstall and install software downloaded from their site (PS_AIO_04_C4500_USW_Full_Win_enu_120_210.exe). This indeed solve, and another problem I had (see network & Wireless forum), but this download is missing the software package I.R.I.S. OCR, presumably for reasons associated with 3 rd-party lisensing. HP support insisted that this download was the OCR, but the OCR .exe is certainly missing. Workaround needed to go back and re - install the CD software, then uninstall everything except the OCR package (you can do), then install the downloaded version. My PC still takes too long to start, but it's probably the combined effect of each software package, I never installed wanting home phone so that it loads.

  PeterM

• C3750 interVLAN routing - no internet access for customer switches

  I have a stupid question with my itinerary (intervlan).

  I have a test configuration to a stack of C3750 as core and a few 2960's like access switches.

  http://users.fraeco.be/setup.png - switch at the bottom is the new network (VLANNED). The switches on the left is the current network of production (10.1.1.0/24)

  The C3750 to the router is a 30 network.

  There will be 6 VLAN but at the moment I have one configured. VLAN50 - 10.5.1.0/24

  The C3750 I can ping my network current production, internet, other VLANs in the testsetup... Everything.

  Of the C2960 I can ping other VLAN, join the entry door, reach the router, reached the currenct production network. But I can't reach internet. I have configured 'ip default-gateway 10.5.1.254' on the C2960. C3750 relevant config is down below.

  How can I reach other networks connected to the router and the internet not switches to access? I'm trying just to ping 8.8.8.8.

  !

  IP routing

  !

  !

  GigabitEthernet1/0/1 interface

  No switchport

  address 172.16.1.2 IP 255.255.255.252

  !

  !

  interface Vlan50

  IP 10.5.1.254 255.255.255.0

  !

  !

  IP route 0.0.0.0 0.0.0.0 172.16.1.1

  Hi, Maxim,.

  I have no idea about your configuration exactly but for the account information that u as far as I can tell... Configure all the respective host to its ip address vlan respective gateway.

  There should be a static route pointing to the router on the switch of the MLS.

  And also, make sure that it should be static (or entered dynamic in case you use PGI) of all subnets of VLANs pointing to the ip directly connected inverter MLS.

  It will certainly work.

  Thank you

  Amit

  Please rate if this post would be useful.

• Internet access for laptop Dell Mini 10

  I bought a Dell Mini 10 recently it has worked well up until 18/08/12 and then I could not communicate with the Internet, the company told me to return it for an Exchange, I removed the programs I had installed and also I found a program that had been downloaded auto, Microsoft Net, as soon as I removed this program I could access the Internet without any problem. Anyone else having this problem?

  I understand, there was a recent update for the McAfee antivirus program that has paralyzed the ability to access the Internet.  If you use McAfee antivirus, you must visit their website and follow their advice.

  Normally, you do not want to remove any .net software, but it seems that in your case you lucky.  Detached may cause other applications a malfunction however.

  Good luck.

• ASA 5505 - order Internet access for users

  Hi all

  I have a Cisco ASA 5505 connect my LAN over the internet using NAT/PAT. I want to restrict access to the internet on ports 80 and 443 on a per user basis.

  That is to say access to management staff while limiting the general staff.

  I understand how this on a per device level by creating an access list to block certain IP addresses to the internet, but I would limit some users.

  I guess they will have to authenticate to the ASA some how.

  Pointers?

  TIA.

  You need to set up the Cup via proxy in ASA.

  Here is the configuration that we add on ASA:-

  access-list WEBAUTH permit tcp any any eq 80

  access-list WEBAUTH permit tcp any any eq 443

  AAA authentication WEBAUTH indoor soccer match

  AAA authentication secure-http-client

  AAA authentication listener http inside port www redirect

  Redirect the AAA authentication listener https within the https port

  http://www.Cisco.com/en/us/docs/security/ASA/asa72/configuration/guide/fwaaa.html#wp1043431

  http://www.Cisco.com/en/us/docs/security/ASA/asa72/command/reference/a1_72.html#wp1437427

  Kind regards

  ~ JG

  Note the useful messages

• Parental controls in Windows Vista Service Pack 1 freeze internet access for administrators

  I just bought a new computer with Windows Vista Service Pack 1 pre installed.  I've set up three profiles.  Two administrators and one user (my daughter).  When I put parental controls on his profile through user accounts, administrators are unable to access the internet.  Before you start to go through each setting and eliminate each other through process of elimination, anyone had this problem happen before?

  http://www.bleepingcomputer.com/tutorials/tutorial139.html

  Read the tutorial above.

  It is the best around on how successfully set up Parental controls on Vista.

  See you soon. Mick Murphy - Microsoft partner

• Put on wireless internet access for laptop 4510

  The wireless switch with LED indicator at the front left of the HP 4510 laptop seems motionless - probably broken and about 2 weeks of vices... Sigh... Any suggestions greatly appreciated!

  Figured it out!

  Must be that HP hired English majors at Stanford, but machines built in China, where the disconnection of the language: the switch in question is not a 'button' but a 'switch' to be dragged, no hurry.

  We did all the pressing in the world and connected here, had support cat, restored, uninstalled Wireless Assistant HP, as proposed elsewhere on this forum and more efforts for 2 hours before casually perfect machine was just the right light and saw that he was not at all a button but a Slide switch. To be slipped. No hurry.

  As black on a black background: known to be bad design.

  Hewlett was an engineer. Packard was an engineer. Correctly identify the names of the parts and fucntion was in their blood.

  Look at us now...

  Sad...

  Sigh...

• How to disable internet access for a computer on a local network?

  I have two Pros Mac 2012 Mid, connected by an Airport Extreme. I'd like one of them (which I edit video projects) stay on my local network, but the Internet to protect better of Trojans, viruses, etc...

  Is anyone know the step by step procedure to implement that? A computer is on OS X 10.11.3, is that I want to keep the Internet running 10.8.5

  1. disable the Wi - Fi

  2. remove the Ethernet cable.

  3. made

• Internet goes for a second randomly

  Hello

  A few days ago, I noticed that my internet has begun to decline for a few seconds when playing warcraft 3. Its really annoying. IM using wifi and it shows no internet access for a few seconds and after that I can normally only use internet again. I do think that its my modem problem, because the other pc is not a problem. I don't think I installed anything when it started to happen. It's just random. Yesterday the problem was as magically disappeared, but today I am getting random falls again.
  -Does anyone know a fix?

  The question is very likely to occur for the following reasons:

  1. map of wireless network has been configured with energy saving features.
  2. the IP address is not static or dynamic, whereby case, the lease of the IP one expires after a while and a new IP address is to be retrieved.
  1. Please provide the model of the computer / wireless network card used to help others.
  2 follow the link: http://windows.microsoft.com/en-in/windows7/change-tcp-ip-settings
  But, here,.
  
  Select use the following IP address: option (click on the address of our choice in the 192.168.x.x sequence, where x is a number between 0 and 255) with subnet mask 255.255.255.0 and default gateway as 192.168.1.1.
  Answer if the problem persists.

• Block internet access on a per client basis

  Seems like such a simple question, but I cannot quite do things. The firewall is 1760 with IOS 12.3. I'm trying to block internet access for a specific internal ip address, but no matter how create the access list seems to block internet access for all machines. Argh.

  I have attached a clean version of the config file in the case that is needed.

  The last thing I tried was:

  access-list 101 deny ip 10.10.10.95 0.0.0.0 0.0.0.0 255.255.255.255

  Interface FastEthernet0/0

  IP access-group 101 out

  This has blocked all net access for all internal machines.

  Help! :)

  Hi Paul,.

  Do not use your Joker or your access list. Implement as shown below.

  access-list 101 deny host ip 10.10.10.95 all

  access list 101 ip allow a whole

  You can also apply the access list to the Vlan1 interface as is the first interface that meets your LAN traffic.

  interface Vlan1

  IP access-group 101 in

  or

  interface FastEthernet0/0

  IP access-group 101 out

  HTH

  MAR

• Parental Controls + Internet Access Policy 'Add' is shaded on

  I need to add several new devices to my "target devices" in the Parental control-Internet access policy and program schedules that devices can get online. But my 'Add' is shaded out and I'm not allowed to add devices. I use the browser to log in to the router.

  To manage access to the Internet, you have two methods available, Parental control and Internet access policy. That a method can be used at a time. So my first question which option you are trying to use to block or plan the Internet access?

  As the Parental controls can restrict internet access for up to five computers or devices. You can block access to the internet or to limit it to specific times, and you can also block specific Web sites.

  So if you have several devices then 5 to add then you should use the political Internet access option.