Internet access with delay on safari

Similar Questions

• loss of internet connection on windows 7 pro 64. Says connected but no internet access with yellow exclamation point! Help, please!

  I keep losing internet connection, I have windows 7 and every time I connect it to the wireless internet works for 5 minutes, then a little ytellow icon pop up and say its connected without internet access. Its happened to me before and recently started happening to my cpu. I did a FRESH install of windows to see if it can help, but it didn't. IM literally on the point of throwing my processor through the cause of wall, I can't find a solution to this anywhere. Whenever the yellow icon pops up that I have troubleshoot and it indicates the default gateway was unavailable and that fixed it, then I have internet again for about 2-5 minutes and it does the same thing. Ive never had this problem on my cpu and the network has not been changed or anything, so I don't know what that the * could cause this. I literally wiped everything on my cpu and then do a system image to restore too. Ive been messing around with the registry, deletion of things here and there missions that I read, but only thing that happens is losing internet alltogether and must restore from system image. I'm really running out of ideas. Help, please. I have an adapter netgear wn311b wireless pci-express with the latest drivers.

  to detect new updates for network based components on intel:

  http://www.Intel.com/p/en_US/support/detect/?IID=subhdr+dnlds_detect

  You will be asked to download and install active x components.

  After the installation of the small file, click on the "expand all" button

  You can choose to update your components wired network if necessary.

  then re-install your wireless network management software.

  assuming that your wireless network is intact (connected, permits), you can surf the net.

  If the problem persists, troubleshoot more away:

  When the computer is turned off, set again you netgear pci wireless adapter.

  set of antenna for optimal orientation.

  Check if your computer is authorized by your wireless router.

  check the signal strength of your wireless router and the wireless pci adapter.

• How can I share my internet access with my Xperia Z2 via a usb cable?

  I would use my internet access pc-s on my phone, but I do not have a router and my pc cant share it wireless

  Try the following tutorials:

  http://www.howtogeek.com/117118/how-to-connect-your-Android-to-your-PCs-Internet-connection-over-USB/

  http://www.howtogeek.com/214375/how-to-reverse-tether-an-Android-Smartphone-or-tablet-to-your-PC/

• no internet access with lan peer-to-peer active

  im running xp pro sp2 on two computers. I have a network peer-to-peer between them which works very well.

  that a computer has wireless inet, it works very well with only this computer

  on. When that I turn on the second computer, the local network still works, but now there is no inet

  access. the two computers are always connected and the wireless is connected.

  in order for me to get access inet, I have to disable the lan with the inet connection.

  on the screen I get "inaccessible web page" refresh same thing if I type in a single

  address for example. www.msn.com, it will work most of the time it web page

  screen not available - it is so connected. any ideas?

  John

  Hello

  Method 1:

  As you use internet Explorer try these steps and see if it helps:

  (a) start then go into Control Panel.

  (b) click on internet options, then connections.

  (c) click LAN settings, and then it will open the automatic configurations.

  (d) remove all checkmarks that you see on the automatic configuration and proxy server.

  (e) press OK.

  You can also try the steps outlined in the article below:

  http://support.Microsoft.com/kb/870702

  See also: http://support.microsoft.com/kb/956196

  http://support.Microsoft.com/kb/936211

  Method 2:

  Check if the problem persists in the clean boot:

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Using a cellular provider like internet access with an E4200

  Hello:

  I want to upgrade my home network a WRT300N towards a new E4200 and spend my MiFi cellular access DSL internet provider.  (The spd DSL is only 500K, and I can get up to 21 MB on cell phone at about the same cost.  Woopee!

  The problem is that only my supplier available a cellular access system is also a router without wire - a home network router small no less - a 4 G Netgear MBR1210 Turbo hub.  But she has a few ports ethernet on it.  So I think that I must configure network settings domestic suppliers to be totally different from my outgoing home network (different SSID, channel and different home range of IP address, disable DHCP if possible, via its outputs ethernet plug at the entrance to the INTERNET on the E4200 with a short ethernet cable and then use my Linksys as the DHCP server and the router for my home network wireless network.)  I have a very large network with many devices much more on what block takes care of the provider.  I can configure the linksys E2400 to accept the IP address that the MiFi unit never gives him as my Internet service provider entry and then configure the rest of the network, as it used to be with my older Linksys WRT300N router?

  See you soon!

  I think it should work.

  Connect your service provide router on the Internet on the E4200 Linksys port.

  Open the E4200 configuration page and check the IP address on the State of your router?

  Try to follow this link to routers towing cascading.

• Internet access with VPN Client to ASA and full effect tunnel

  I'm trying to migrate our concentrator at our new 5520 s ASA. The concentrator has been used only for VPN Client connections, and I have not the easiest road. However, I, for some reason, can't access to internet through our business network when I've got profiles with lots of tunneling.

  I've included the configuration file, with many public IP information and omitted site-to-site tunnels. I left all the relevant stuff on tunnel-groups and group strategies concerning connectivity of VPN clients. The range of addresses that I use for VPN clients is 172.16.254.0/24. The group, with what I'm trying to access the internet "adsmgt" and the complete tunnel to our network part is fine.

  As always, any help is appreciated. Thank you!

  Hüseyin... good to see you come back.. bud, yes try these Hüseyin sugesstiong... If we looked to be ok, we'll try a different approach...

  IM thinking too, because complete tunnel is (no separation) Jim ASA has to go back for the outbound traffic from the internet, a permit same-security-traffic intra-interface, instruction should be able to do it... but Jim start by Hüseyin suggestions.

  Rgds

  Jorge

• No Internet access with EA2700

  I recently bought an EA2700 to replace an old Belkin. I ran the set up CD and I'm unable to establish an internet connection. I am able to connect to the router (wired and wireless), access the settings, etc. but can not reach the net. I tried to disable the firewall, DNS of hot flashes, disabled IPv6. Did all the basic steps, resett the router/modem, etc... nothing. I plug in the Belkin and it connects fine. Any help would be great.

  Oh, Ive tried my laptop (win7) and desktop (Windows XP) and both have the same problem.

  I hate it when the solution is simple.

  Thank you very nice folks at Cisco, we were able to get the connection.

  We have:

  -by default of the router (reset button)

  -power to bike all devices

  -uninstalled and reinstalled Cisco Connect (did not try the first time around)

  -After the configuration, an update was necessary.

  -After the update is finished, the internet connection was created.

  Hope this helps

• Internet access with Verizon Jet Pack work?

  Just signed up for Adobe CC download fails. Check the internet connection. I use a Jet Pack from Verizon. It will work at all?

  Hi DebLuttrell,

  Please refer to the below links:

  Troubleshoot Adobe Creative cloud download, install and update questions

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Let us know if that helps.

• Can I order vista sp2 and all the other updates on cd-rom, as I have limited internet access, with a telephone modem prepaid, Email removed for privacy

  I run an Acer Aspire, Windows Vista home basic sp1, Mobistar connected download capassity only 250 MB

  No I know not. See this previous discussion: http://social.answers.microsoft.com/Forums/en-US/vistainstall/thread/f6c7f79b-b88d-490f-8542-e57b1ff3cf6f

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I need the Java Player for firefox on a stand-alone computer without internet access. I have internet access on another computer. How can I do this?

  I have a stand-alone computer (no internet access) with firefox to run the Java Player. I have internet access on another computer in order to download files and hover over things to the stand-alone computer to install. That do and where can I download and how I install on the stand-alone computer.

  Thank you

  Leroy

  Hi, to get the Offline Installer that you can use on the computer without internet access, please visit https://java.com/en/download/help/windows_offline_download.xml

• no internet access at el capitan

  Mac Pro with El Capitan. No Internet access with any browser, but I can access the Internet using the recovery system (this is what I now use to access the site of discussion). Already verify permissions and fix them with disk utility. Other Mac connected to the same router (Apple) can access the Internet without problem.

  It seems I have to re - install El Capitan. Fix?

  How you access the Internet? Wired or wireless? Do you have a good IP address? (Note that the one that starts with 169.254 is NOT good.) What about the access with something else outside of a browser, such as the Mail app? Other devices on your local network can access the Internet?

  Good luck.

• After the abduction of a trojan virus, I still have no internet access

  After the abduction of a trojan virus, I still have no internet access with Internet explorer, Google Earth, or Yahoo Messenger. Attempt to update Yahoo Messenger from a download of update, a message indicates "Yahoo Messenger is unable to download files needed for installation. Please check the firewall settings and try again. It does not matter whether or not the firewall is disabled. Yahoo Messenger is able to connect, but not to show me the list of the rooms in the right panel. Firefox still works fine and all I use.

  Here are a few things to check after an infection or elimination:

  We will check your network connection properties.

  Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your disabled Internet access.

  Click Start, run and enter in the box:

  Inetcpl.cpl

  Click OK to launch the Internet Properties Control Panel, choose connections, LANsettings.

  Or, in Internet Explorer click on tools, Options, connections, LAN settings.

  These settings control your Internet access for all browsers.

  (If you make settings, write them down so you can undo changes if you must)

  On most environments, not independent, there will be check automatically detect settings and the other boxes are (as Proxy Server) is disabled.

  Automatically detect the setting checked =
  Use the automatic configuration script = unchecked
  Use a proxy server for your LAN = not checked

  Make changes, then click OK, OK to save the settings.

  Check your settings for how your network adapter gets its IP and DNS settings.  On most home systems, these parameters must be defined for the system will get the settings automatically.

  If you have another system on your network that works, you can compare these settings with the settings of the system which is not a work and make adjustments.

  Click Start, settings, Control Panel, network connections, and then select your current network connection.

  On the general tab, click Properties.

  In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.

  In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings automatically.  Select the following two options:

  Obtain an IP address automatically
  Get a DNS server address automatically

  The rest of the options on the screen should then be grayed out/not available.

  Make changes, then click OK, OK to save the settings.

  Restart your computer and test your connection.

  If it still does not work, check your settings are still in place after a restart and then release and renewal IP of your network device configuration settings.

  Click Start, run and enter in the box:

  cmd

  Click OK to open a command prompt window, and then type the following commands:

  ipconfig/release

  ipconfig / renew

  output

  Restart your computer and test your connection.

  Download, install, update and do a full scan with these free malware detection programs can solve any problems:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  It can be uninstalled later if you wish.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Can I restrict or limit internet access on a farm in RDS?

  Location:
  -need to allow remote access to the farm of RDS Internet of remote sites (without VPN)
  -Sessions close require access to the intranet using IE (Dynamics CRM)
  -Some users do not use internet in a responsible manner (wasting time, inappropriate sites, etc.)
  -need ability to prevent browsing of the sessions

  I know that we could set up a proxy server (IAS or similar) at Headquarters but I can't handle this being rather long and frustrating for users (and so myself).  I have also no prior experience in the implementation or management of a proxy server (just to know that they can cache and filter web site traffic), so one for 300 active users on the portal management would be a problem.

  If I want to avoid using a proxy server at Headquarters can I do a GPO or something to prevent casual internet browsing from just the servers in the farm?  If we can allow access to specific sites (white list) which would be an interesting option, but not a condition in this regard.

  We review to implement a form of filtering on remote sites affected (using K9 agents on computers personal or similar) of the internet, so we should just remove the back door of the use of the farm to browse the internet and circumvent the once connected local filtering.

  Remote sites use stations XP and Win7, configured in mode working group.  Each site has 2 to 4 computers.  Remote sites share their internet access with computers not relating to staff, so we are reluctant to restrict internet access for all users on the site (using the subscription services provider of firewall for example).  There are more than 20 remote sites.

  The farm is built using the 2008r2sp1 server.  We have a RDS (also a dedicated redirector) gateway and 4 session host servers.

  Any ideas?

  Try asking in the Forums of Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Extend my extreme network with another extreme - waiting for internet access

  Hello - I have a new generation Airport Extreme (let's call it Extreme1) connected to a Comcast modem and it works very well. The extreme will be the router that the modem has no router function. I'm trying to expand my network to another room with another extreme (let's call it Extreme2). I have a connection cable between two rooms. Extreme1 has an ethernet cable from one of its LAN ports connected on port WAN Extreme2. When I try to create a new network with Extreme2 (in aid of the same name, passwords, etc.) it does not work. He was suspended at the end when he is looking for a connection ("Waiting for internet access")-I did the following things based on what I read here:

  1. Changed IPv6 link local parameters
  2. Tried the whole upward on my Macbook and tried on my iphone
  3. The Wan first and then tried to change the configuration after you done for Extreme2 by creating a network
  4. Tried to create a network with Extreme2 connected directly to the modem
  5. Extreme2 factory reset after every attepmt

  And nothing works. Kicker is, I also have a reasonably new airport express and the same thing happens to her as well.

  Do I need to adjust some parameters of network that I'm not aware of? Is it possible that my LAN ports are disabled on Extreme2? It is brand new.

  Thanks for any help.

  Have you used the Apple Setup Assistant?  If you did, it had notified you that the extreme second was being configured "add using Ethernet. The wizard will automatically configure the second airport with the appropriate settings for you.  All you have to do is enter a name of device for the second AirPort Extreme.

  Here I'm assuming that you reset the second extreme to parameters by default until you set it up again and that your second Extreme is the current version of the "tower" or that of previous versions "flat or square.

  The example below shows an AirPort Express as the device which is the extension of the network, but you will see the name of your network and AirPort Extreme on your configuration screen.

  Post back if you need some tips on using the "Wizard" for your configuration.

  

• Equium A100 - 027 PSAAQ - having problems with WiFi Internet access

  Just installed Windows XP Home edition on my Equium A100-027 (PSAAQ) Vista didn't like. Now I'm having problems with Internet access. Should what drivers I download and how to install?

  Thank you.

  Hello

  I suggest you to check the site toshiba driver
  -> http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  You can search your machine and download the wlan drivers. If you don t know that you you just all download and install ´em, one of the drivers SHOULD work. ;)

  Welcome them