Internet Central using DMVPN

Similar Questions

• Activate the addons in Internet Explorer using the registry.

  I tried to activate some of the addons in Internet Explorer using registry in our area/pc environment.

  Click RUN, type REGEDIT, and then search for:

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Ext\Settings]

  Under each SSID settings, look for the FLAGS key.

  1 = disable, 0 = Enable
  But after the closure of the registry, launch IE, some of these changes of flags at 4 or 5.
  So my question is... what is the flags 4 or 5, referring to the?
  Hello
  The question you have posted is related to the area and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.
  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

• Why can't I access the internet without using safe mode

  Help cannot access internet without using safe mode

  Hi Dharrington25,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  As you are able to access the Internet using the safe, put your computer in a clean boot state in order to identify the program causing this problem.
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See KB Microsoft article below for more information on how to solve a problem by performing a clean boot in Windows Vista or in Windows 7:How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Why my printer dell 968 of the internet feel used?

  Why my printer dell 968 of the internet feel used?

  Internet Explorer 9.0 was the problem.  When I tried to print it sounds internet has stopped working and then would not print.  I removed 9.0 and reinstalled the 8.0 and the printer works fine.

• Internet access using Personal Hotspot

  Hello

  I can't get my laptop to connect to my personal hotspot of the iPhone 4. The iphone appears on the list of available networks. My laptop is a Dell N311Z model. The connection works with an iPad.

  Is the personal hotspot that is able to provide an internet connection for my laptop or is there a better option where there is no wifi.

  Thank you

  Al

  Hi Alan,

  I understand that you have problems with the Internet connection using iPhone hotspot.

  I would be grateful if you could answer the following questions:

  1. did you of recent changes made to your computer?

  2. What is the exact full error message you receive when you try to connect?

  Here are a few troubleshooting steps that you can try to solve this problem.

  
  

  Method 1: Run the network troubleshooter utility.
  

  Refer to this link:
  http://Windows.Microsoft.com/en-in/Windows7/using-the-network-troubleshooter-in-Windows-7

  If the method above does not work, proceed to the next method.

  Method 2:

  a. clear Personal Hotspot.

  b. changing the password of your Wi - Fi password.

  c. on your computer, open the network and sharing Center.

  d. click on manage wireless networks.

  e. remove your iPhone network connection.

  f. once the instructions above are made, reactivate your personal hotspot.

  (g) on your computer, go to the list of network and connect to your iPhone using the updated password and check.

  Also refer to this link: wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Bad old Firefox version 3.6 shows to the internet while using the last version 17

  I use Firefox latest version 17 but on the internet it tells me that I would use Firefox 3.6.
  My PC is an Intel Duo Core processor of 2007 on Windows XP Service Pack 3.
  How is this possible and how to solve this problem?

  Thank you

  Your user agent string has been altered in the past when you were using Firefox 3.6 and it has not been updated since. Try reading some sites say that Firefox is obsolete or incompatible, even if it's the latest version

• Impossible to access Internet or use EWS 8610

  I have had this printer for 3 months and everything has been fine.

  Now the sign says 'Necessary connection', and the printer will not connect to Internet. I can't use the built-in Web server and HP connected in a line indicates that the printer is not connected.

  Toolbox displays ink levels, but nothing is listed under network information.

  I can print from my computer fine through a USB cable.

  I have reinstalled drivers, restarted the computer, restart the printer. I used print and Scan of the doctor.

  Help!

  Hello @mikedog,

  I understand that you are not able to use your HP Officejet Pro 8610 e-all-in-one printer via the network connection. I would like to work with you today with the resolution of this problem. Can I please you follow the steps below.

  Step 1: Powercycle network:

  There are chances that an update has been run on your network that has now blocked the printer. To solve the potential problems of router, can I have you follow the steps below to powercycle your network connection.

  1. Start by unplugging the power cable to your router
  2. Once your router is unplugged, turn your printer off
  3. Then, shut down your computer
  4. After 30 seconds to 1 minute, reconnect your router back in
  5. Then, turn on your printer
  6. Turn on the computer

  After a few moments the internet connection will be back. Please check on your computer and make sure you are able to navigate to Web sites before you continue.

  Once your network is running again, proceed to the next step.

  Step 2: Check of connectivity:

  1. On the front panel of your first printer to select Setup
  2. Under the configuration menu, select Network Configuration
  3. If your Ethernetconnection, Ethernet
  4. If your Wirelessconnection, touch wireless
  5. Select discovers (or wireless Ethernet) settings
  6. Make a note of the IP address
  7. On your computer, try to access the browser of EWS again by entering the IP address (with no www.) in the address bar
  • If a Web site for your printer now open, please test print again to verify that the problem has been resolved.
  • If a site Web for your printer cannot always open, proceed to the next step.

  Step 3: Reset the network defaults:

  1. If you use a network Ethernet cable connection, please unplug the Ethernet cable now
  2. On the front panel of your Officejet select Setup
  3. Select Network Configuration
  4. Select restore default network settings
  5. Choose Yes

  Once the default network have been restored, If you are using an Ethernet connection, plug the ethernet cable back in.. If using wireless, continue to the next step.

  Step 4: Reconfigure wireless:

  1. Press Setup on the front panel of your printer
  2. Select Network Configuration
  3. Select the wireless settings
  4. Choose Wireless and make sure it is powered
     Select the wireless configuration wizard
  5. When you are prompted, select your network name SSID
  6. Enter your password (key) wireless. It is case sensitive.

  Once the connection has been established, if please collect the IP address and try to open the browser EWS printers again.

  Once you are able to open the EWS Navigator, it will prove with 100% certainty that your printer and your computer communicate on the network once more.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• How can I connect Internet Explorer using Netgear WNDA3100VZ?

  I had some kind of virus that appeared in netbt.sys and mrxsmb.sys and other places. AVG it erased everything, but now I can not get Internet Explorer online.
  Firefox works fine. I use connection supplied with Netgear's wireless LAN adapter and drivers. I have a modem without border wire.

  In addition, it seems that AVG is good at eating/destroying this file. The following link mentions this problem:

  http://forums.Avg.com/GB-en/AVG-forums?sec=thread&Act=show&ID=185815#post_185815

  The individual post here talking about the AVG Rescue Disk. I would say since AVG caused the problem, perhaps the tool to fix it for you.

• No internet after using the Envy 100

  Whenever I use the Envy 100 (or to be more precise: when the urge got a Wi - Fi connection) I lose internetconnectivity. But only after I finish a session to my router (Linksys WRT610N). When I turn off the router and the next time, it cannot connect to my internetmodem (Linksys AM200) at all. WiFi is in place, but I have only local access, apparently the router cannot connect to my modem (which indicates both the CABLE with the router as the to Internet is up.)

  This only happens after the sessions where I used the desire, otherwise everything is OK. During these sessions, there is no problem, only after the start a new. The only way to restore the connection is reset my hard router and reconfigure.

  BTW. I am one of the users who are unable to get a connection to the webapps desire, but there work ePrint - that is another thread on this forum. Not sure if the two problems are or are not connected.

  Any help or pointers?

  herstil wrote:

  Whenever I use the Envy 100 (or to be more precise: when the urge got a Wi - Fi connection) I lose internetconnectivity. But only after I finish a session to my router (Linksys WRT610N). When I turn off the router and the next time, it cannot connect to my internetmodem (Linksys AM200) at all. WiFi is in place, but I have only local access, apparently the router cannot connect to my modem (which indicates both the CABLE with the router as the to Internet is up.)

  This only happens after the sessions where I used the desire, otherwise everything is OK. During these sessions, there is no problem, only after the start a new. The only way to restore the connection is reset my hard router and reconfigure.

  BTW. I am one of the users who are unable to get a connection to the webapps desire, but there work ePrint - that is another thread on this forum. Not sure if the two problems are or are not connected.

  Any help or pointers?

  A FW update was recently released to solve the problem with access apps... If you have not received notification on the urge of an available update, you should be able to go to your desire screen and select settings (wrench) > Web > Product Updates > check product updates get the latest FW installed on your printer.

  Regarding the other question - routers are not intended to be turned on/turned off constantly, but it must always connect to your reliable modem after reboot.  Complete the FW update and see if the problem persists.  Also, can you share why you turn off the router on a regular basis - there is really no need to do so.

• Is there a way to change the internet browser used by Windows Update?

  The only reason I do this is because I have another browser that I use, and I never use Internet Explorer. I wanted to uninstall Explorer, but I thought that if I did, I could not use Windows Update.

  Lol for Windows XP, you must use IE for WIndows Update because WU use an ActiveX control, other browsers do not support.

• Set the sharing of internet connection using Windows XP & Windows 7 (two laptops). __

  We have two Toshiba laptops, using a Windows XP operating system and the other Windows 7 operating system.  We use a UM175 Verizon Wireless Modem so that in the United States (we are snowbirds) and an Internet Mobile Rogers stick to the Canada.  I have read the article on http://support.microsoft.com/kb/306126 and would like to know if this procedure would allow us to be able to connect two laptops to a modem for internet connection.
  Thank you for your help.

  Use this procedure to connect the modem to the Windows XP computer wirelessly and share the Internet connection with Windows 7 computer.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Why I can boot into safe mode with internet connection, use the operating system, etc., but can not open a normal session without password administrator; who got the disabled.

  OEM Vista Home Premium. Normal startup does not recognize the password. When you click User icon it says: "your account has been disabled. Please, see your system administrator"I looked in the mirror, but it did not help. Booted, press F8, went in safe mode with network connection. Everything seemed to be there. Surf the internet and then started to ask me why I don't have a password here when I did normal start-up. What is the password? Check "Microsoft Answers", but what I came out which was, I need to reinstall the OS, which I can't do it without a drive anyway.  I thought that I've used it before, I knew the password. This computer has been recently "reinstalled" internal folder 'restore '. Something must happen. A unknown password can be removed from safe mode? Ultimately how reinstall you a clean Vista when all you have is the key to product and no local or OEM support? What would be the difference between a password reset disk and the OS disk.  The two would probably be stored side by side. Not to mention that most of us Dummies want to just surf to buy, and if we can not surf, we cannot buy. Dummies help us get back on the internet, Microsoft. At least take care of this shot.

  Hi PAM,.

  In Safe Mode, try to activate the high administrator account http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-windows-vista/.  Then log in using account and use it to solve problems with your normal administrator account login via control panel / user accounts / manage other accounts.  Find the one you want and make the appropriate changes to fix it.  If you can't, then you need to address as a corrupt account by using the following procedure:

  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  If this is the only available administrator profile (you must be an administrator to solve this problem), activate the hidden administrator account (HAA) (i.e. what you did above, or you can do this by using these instructions instead: http://www.computerworld.com/s/article/9001970/How_to_access_the_true_Administrator_account_in_Windows_Vista?taxonomyId=17&pageNumber=1.)

  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  The fact that it says it is disabled gives me to think that you can use the guest or built-in Administrator account already (as normally, you cannot disable an account, but you can with these two which cannot be deleted and only disabled).

  The password reset disk is only good if created before that you need and only to restore a password, do not to activate a disabled account.  Another thing that goes beyond passwords here.

  A recovery disk allows you to do some advanced options of recovery by booting the disk, but it will help you restore the operating system (or help you with this problem either).

  An Installation of Vista genuinve disc (the operating system drive as you seem to be describing) is a disk that contains the operating system.  That, if it is the original disc supplied with the system and is exactly the same as the product OEM key that you must allow you to do a clean OS install (although I would be first backup you'll pretty much lost everything in the process).  The following should help: http://www.vistax64.com/tutorials/117366-clean-install-full-version-vista.html.

  If you have a factory Conditions or a recovery Partition restore disk, then these are alternatives to a clean install if you don't have this disc.  But the procedure varies according to the manufacturer, make and model of PC.  Most of the manufacturers will allow you to buy these records of restoration (for a fee) If you cannot do it with a recovery Partition cannot create diskettes from the recovery Partition or have no other option.  Visit the support site of the computer for information on this topic, available options, and related costs.

  If you cannot enable the built-in Administrator account and cannot access the system in normal mode with this or another administrator account, then I'm afraid a clean install or restore to factory conditions is your only option.

  I hope this helps.

  Good luck!

• Internet browsing using memory

  This morning, my computer showed 4.5 GB of free memory.  My daughter was on the internet for about 45 minutes and after that, our memory had fallen to 5.7 MB.  No music or pictures have been uploaded.  This may be the cause?  Let me know any other information you need.  Thank you very much for your help!  Andrea

  There are a few tips on the reduction of the use of the disc and find out what is using the space in this article:

  http://www.hanselman.com/blog/GuideToFreeingUpDiskSpaceUnderWindowsVista.aspx

• WRT54G Setup for internet access using Lacie Network Space Max

  Help, please!

  I tried for the past 2 weeks, try to configure my WRT54G Router, so it allows me to access the Lacie on the internet without success. I followed all the instructions of Lacie and all other FAQ and help on the internet, still no luck. I spent several days with Lacie tech support and they could not understand it - why my router would allow me access via internet. I hope that the big guns here can help me.

  I have a number of laptops connected to my local network and all wireless laptop can access the NAS Lacie cable to one of the ports on my router. My whole system works wonderful locally.

  The Lacie received a static IP address to 192.168.1.199

  My local network has an IP departure from 192.168.1.150 and ends to 192.168.1.199

  My router IP is 192.168.1.99

  I've assigned port forwarding to my Lacie (192.168.1.199) for ports

  20, 21, 25, 80 and 443.

  I tried other settings but no help. Help, please!

  Happy new year!!!

  Hey Scrooge.

  Thanks for your help... my SIN was in fact all along. I used my cell phone to connect to all this time. Today, I tried my work PC to connect using ftp://x.x.x.x and it is well connected.

  I appreciate your help and your patience.

• my internet is used with any one using the computer as I think it's because the svchost.exe is corrupt, as a window comes up saying high disk useage has one an idea how to solve this

  the load down on the internet limit is used in about 2 weeks, that it is with a download of large files. also, a window pops up saying that he caused by svchost.exe high disk usage.

  I had a few a look at the problem on the computer and they seemed remedy and the down load was normal for a while, but has since returned to duty.
    

  Hello BrianWallacexx,

  This thread has been created in the forum Desktop and personalization; the Microsoft moderation team has moved this thread in the Forum user accounts, security, and confidentiality.