Internet problems WRT54G2V1 computer and printer/2

Similar Questions

• Error: There is no communication between computer and printer

  Original title;

  printer not printihg after the installation of new updates

  I get messege there is no commacation between computer and printer

  Hello

  1. What is the brand and model of the printer?

  2. What are the updates that have been installed before the show?

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  3. have you checked the status of the printer in Device Manager?

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  4. what operating system is installed on the computer?

  You can Open the printer Troubleshooter and check if it makes a difference:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can follow this link and check if it helps.

  Printer in Windows problems

  Let us know the result!

• My laptop computer and printer do not communicate with each other.

  I went to "printers and devices in the control panel and my laptop has an icon of troubleshooting beside him. I tried to search for updates/drivers solve the problem and nothing works.  It says ' unknown device is not a driver. My fax, copier and scanner work, but the printer does not work because there is a problem with my laptop. I could not use my printer because I was out of ink for 2 months, then I buy ink and now I can't print! Ink for a Lexmark is not cheap.

  I hope someone can help!

  Karen

  Because my printer is a Lexmark, I had to go to the Lexmark he site and search "Drivers" under which specific printer, you have it downloaded on my computer and loaded this way to connect my laptop with my printer.

• Problem with Lightroom and printer Epson

  I suddenly have problems printing from Lightroom. I have Lightroom 1.4.1 installed on an iMac G5 and have an Epson Stylus R2400 Photo. I use this combination from the beginning without any problem. Now all of a sudden when I try to print I get an error message that says media is released or not loaded properly. Is the case. I tried to restart my computer, the printer, and all I can think about, but nothing works. I can print from other applications without problem, so I guess it's a problem with Lightroom.

  Someone knows something similar? I was going to uninstall lightroom and do a reinstall, but I can't find my installation disk. Now I am at a loss to figure out what to do.

  Thank you

  Craig

  Try to remove your file and/or print templates.

  Lightroom is unique in many other programs that it saves and restores the settings of the printer. Some bad data may have tried to be passes. Could contribute to a 'new beginning '.

• computer and printer connect sometimes, sometimes not. There could be a delay time.

  Hi, I have HP photosmart 5510, TRIOUX, scanning, web copy.    When I specify printing, sometimes it works, other times, the computer says it cannot connect to the printer.  The printer could not connect to the computer to scan a page to the computer.

  My computer is an iMac, osX.

  Sometimes after a long period of time the dormant printer will activate and print the room - it seems as if something was trying to connect to a specific time.  Can anyone help please.

  Thank you.   I changed the timer for max - now it is 15 minutes.   I'll check for a few days.

• Problem of ink and printer? Office Jet Pro 8500 HP has

  Hi I do not know if my printer does not behave as it should. My problem was that I have replaced the ink with new cartridges that had been hanging around for a year. I use those reconditioned. They seem empty cartridges but black on replacement that was totally fine - full. Considering that they were brand new and sealed in the course of the year and stored in a cool trunk of the sweepstakes and the black is beautiful I think it's strange. The printer however kept to work very well during the period that they were supposed to be empty - I've used them for about 1 month and turn off but not frequently. The demand of a portal replaceing may have been accurate as the ink was reduced on paper after this month.

  Then, I bought new and put all at the same time. Too, they were recorded as having a tiny amount in them and one with none at all. Once again that black was complete.

  The printer has become very strange because sometimes it would take 6 minutes and today 8 minutes to control standard boot "several minutes". Its seems now to clean the printer heads and align them each time and going in circles sometimes 3 times in total, as well as other normal checks. The printer not to protest what either one error other than the ink levels.

  I wonder if my source of purchases can be a problem, or is the printer. I want to say that I am against the idea of genuine inks being the only consideration that re-controlled black inks are supposed to be true of the printer itself, although whether re-manufactured that works - but not the other colors.  I have it set to the factory settings under the part of the Tools menu. After that a re factory - set ink levels seem to have nothing bother it at all the same as before.

  How can I check if the printer is fine if it seems it's already?

  It's ink? It's the ink supplier? Estimates are just completely wrong, that is to say an eighth full (practically nothing) can mean full yet?

  I have read the instructions and impliented checks but then I missed something or not doing something that the instructions asked me to do maybe?

  Just to be clear, it could be there is a problem of ink repeated twice in a row to bad suppliers from 2 different though unlikely ebay sellers. If ebay buy bad providers to give us a cheaper contract, you have to ask yourself if. They maintain that the inks are high-quality XL stated that are totally compatible inks and good feedback from most of the customers. They are also the ebay powersellers so reliable with quality 99.8% feedback scores.

  I think that the mechanisms are not perhaps how the printer heads join or the cartridges of printers join but don't really have a clue. The printer tell me that this is the case.

  Should I uninstall the software on my PC and reinstall will this help?

  I am confused, I must say - it can be very simple of course good sort.

  Thank you all very much appreciated if you can suggest to me what to do that would be good?

  Of what you mention about the power, here is a post I wrote to explain what is happening out there:

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/power-supply-related-issues/TD-p/2184769

  Regarding the cartridges, if they are genuine HP cartridges, they should all have about a two-year warranty. If you have a cartridge that is not compatible, you can contact our telephone support to have replaced. I generally recommend against the use of cartridges refilled or returned to nine, just to let you know. Of course, you have a perfect right to use and for many customers, they work perfectly well. But a number of cases in the past, I saw the formulation of the ink or incorrect fill methods cause damage in the printer itself. Also, cost-of-page-performance shows that these cartridges are not more effective than the product those HP. Just a word of caution here.

  I saw before independent studies that have been conducted by consumer-reports-esque groups that show identical or similar results as our own internal tests. I recommend always to buy HP cartridges and if possible get the XL cartridges (they are more efficient and more profitable savings).

  That is the information that you are looking for, or is there more that I can add to you? I designed on what you are interested in having more information.

  Let me know!

  -Spencer

• . Problems with PC and printer HP c309g

  We had 3 short bursts of power outages that turned my computer (with Windows 7 Premium). I use RoadRunner

  by Time-Warner and have a Linksys E1200 router and a wireless home network configuration. When I turned the computer

  the, it seemed ok, but when I printed a document, it only printed 1 page of 2. Then I went on the 'computer' desktop and

  because my HP Photosmart Premium C309g printer was on a Drive Z (that I've ever had). When I tried to open the printer, a message came up saying drive Z was somewhere on my computer, but cannot be accessed!

  I uninstalled the printer (using the original cd of HP), and he went.  The I reinstalled the printer using the HP cd,.

  but he listed with drive Z. It works, but margins are not correct and it shows only a page using WordPad.

  I also decided to use the system on the PC Restore, but before he finished, a message came up saying that he couldn't finish. Then

  I tried an earlier date using System Restore and it started, but then the same message appeared. I don't know what it

  wrong or how to fix it. System Restore has been easy to use in the past.

  Can anyone send me a free response?

  Thank you, sing Dixie

  The drive Z are the locations of card camera at the front of the printer.  Ignore them.

  Do not use the software from the CD, it is probably outdated.  Download the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

  Finally, we will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 192.168.1.100 a.149.  We will use 192.168.1.200 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Communication between computer and printer problem

  Why can't I print my documents, they go into the queue and do not print?

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• HP 2541 - problem for computer and iPad to hired wireless printer

  I bought a wireless HP 2541 printer and I am trying to set up my Mac IOS 10.8.5 so that I can also airprint from my iPad.  But my computer does not find the printer wireless.  I tried to solve online but I just can't understand it and am so frustrated gettting. Any advice would be greatly appreciated!

  Thank you very much for answering. I finished by reloading the software and was able to set up for the wireless. But I do know it does not give me this function the first time, but I could be wrong. But everything works perfectly now and I am able to print without effort on my Mac, iPad and iPhone

• problems of communication between the computer and printer (wireless)

  I installed a wireless printer and its not connect with my laptop

  each model is different.  You will need to read the manual on this.  Most likely the IP address assigned to the printer is no longer valid in your current setup.

  from a command like use ping to see if the network route works

  Ping 1.1.1.1 (change the config page IP address 1.1.1.1).

  If you have configured the IP address as static you return to DHCP on the network.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Laptop computer and printer does not

  My Dell Inspiron 1750 is not communicting with my Dell V313w printer.  Jobs are stuck in the pile, troubleshooting cannot identify the problem, and I have tried everything I am well informed of (not much!)  The printer itself works fine.  Help, please!

  Hello

  Maybe you have that impression break - (I don't know your windows version) see here:

  http://Windows.Microsoft.com/en-us/Windows7/view-pause-or-cancel-printing

  If it's OK, try to look in this folder:

  C:\Windows\System32\spool\PRINTERS

  is it empty? otherwise remove all and restart your computer.

  LC

• View pools recompose problems with applications and printing

  Hello gang!

  This will be my first post with you guys.  I have an embarrassing Horizons view with pool environment.  I created this basin as linked clones with workstations dedicated so that users could install this software, they may need.  Now I was in a delicate situation.  I need to recompose the workstations to update their view 5.3 and with the Windows updates and other such items.  Problem is I tried a test on a desktop and it blew the customized software they installed AND their printers.  So I have a few questions...

  What would be the best way to recompose these desktop computers so that in the future if I need to rebuild, I won't send the team to reinstall 862864901 printers (dummy number) and apps?

  Should I look to pass to Thinapps and Thinprint?  I have not dug in one of these areas, so I have no experience with them yet.  If there is documentaion, guides or videos autour, I'd be happy to hide.

  Thanks gang,.

  Keith

  The ThinPrint which is installed with the Agent of the view is not the product full of ThinPrint.  It is just a subset of the features of the full product that VMware under license of Coronado.

  Unfortunately, there is not much documentation on the use of ThinPrint.  If you use PCoIP, he basically just turns and draws local printers in the office.  This has limitations - users may lose access to a large number of features on the more feature-rich TFP.  It's one of the compromises of using a universal printing solution.

  What types of printers are your users print to?  Are they in network printer?  Are users inside your corporate firewall?  If so, you might want to consider deploying printers through the group policy preferences.  I used this in the past instead of ThinPrint because my users used a number of advanced features on our MFP that have not been exposed through the driver of ThinPrint.

• How to download movies on the internet on my computer and burn DVDs of it

  I don't know how low loading movie from the internet and create a dvd of it can someone please help

  Hi esthernall12,
   
  There are many web services available for download videos from video sharing sites. Please use your favorite search engine to find a reliable site to do.
   
  Coming to burn these movies on DVD, you can use Windows DVD Maker, Windows Media Center, Windows Media Player or Windows Explorer.
   
  Find help below articles.
   
  Burn a CD or DVD in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Center
   
  Burn a DVD-video using Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
   
  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player
   
  Burn a CD or DVD in Windows Explorer
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer
   

  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to share Internet between a computer and the Windows Phone?

  How to share internet via pc windows for windows phone?

  Hi magali,.

  I suggest you to refer to the links and check if it helps.

  http://answers.Microsoft.com/en-us/WinPhone/Forum/wp8-wpnetwork/Internet-sharing-not-working-in-Windows-8-Lumia/8bf52b82-ebd8-47dc-B3FC-c1ee06abb6d5?msgId=f83df1c9-F186-495B-b16d-41c09578afdb

  http://Windows.Microsoft.com/en-GB/Windows/Connect-Internet#1TC=Windows-8

  http://Windows.Microsoft.com/en-us/Windows-8/mobile-broadband-from-start-to-finish

  Hope this information helps. If you have any questions, please let us know.

• Configure the settings of the internet with the computer and the modem.

  Original title:

  How the auto connect bsnl broadband? I have a connecation adsl of bsnl in India, my modem is Nokia siemens networks

  How the auto connect bsnl broadband? I have a connecation adsl of bsnl in India, my modem is Nokia siemens networks

  Hello

  I suggest you to contact the Internet service provider for assistance.
  You can check the following links as reference:
  Install or remove a modem
  http://Windows.Microsoft.com/en-us/Windows7/install-or-remove-a-modem
  Set up a broadband (DSL or cable) connection
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-broadband-DSL-or-cable-connection