Internet through the network Switch

Similar Questions

• After an automatic update, lastnight (13 December), has lost access to the internet through the guest account.

  Original title: Guest account Internet connection

  I am using an account on windows 7

  There has just been an automatic update, lastnight (13 December), and now I've lost access to internet through the guest account.

  I think that because of the update, the administrator must log or something, but I'm lost what to do. The internet worked for the guest before the update account and I do not have the administrator password. The administrator has not used the computer because I had an internet connection, as they went on vacation. I'm looking after their cats!

  Any help would be great.

  See you soon

  Tom

  Hi Tom,

  Thanks for posting in the Microsoft Community.

  Since you lost the internet connection after updating, you may need to update the NIC drivers to retrieve the connection. This is possible only if you have administrator privileges.

  For more information, see the article:

  What is a guest account?

  However, you can check if you can try the steps in the article to resolve the problem. If this isn't the case, you may need to wait for the administrator to return the party to the same difficulty.

  Wireless and wired network problems

  Hope this information helps.

  If you need further assistance, please answer and we will be happy to help you.

• How to access internet when the network is put in host-only mode

  I'm using workstation 6.5 version.

  I need to know if I change the network configuration of host-only bridge then what will be required on a virtual computer to access internet from VM parameters?

  If this is not possible using host only then there at - it an alternative for the same?

  Connect NAT instead of guest only network. Your virtual machine should now be assigned a local IP address of the NAT internal dhcp server.

  You can also connect to the Internet through this network and also your virtual machine will talk to the host on a private network.

• Unable to connect to the internet with the NETWORK card and Windows Millennium Edition.

  Hello

  I turned on my old computer yesterday, who has installed Windows Millennium Edition. At the back of the computer is an Ethernet port which is marked as LIEN ACT. The NIC with this port is Realtek 8139 PCI Fast Internet Adapter. I spend two hours on the Internet configuration and I did and finally got connected, but then, a few hours after, something went wrong and the Internet and the NETWORK card has stopped working! And the card has disappeared from the Device Manager, but he's still showing in network in Control Panel. I opened the computer and I reconnected it to the slot, but it did not help. At the back of the computer next to this port are two LEDs - green indicates the power that lights up when I plug the Internet cable and the other orange indicates actual connection. But now these two LEDs are not indicating something even when I plugged in the cable to the Internet, which comes from my router. In the computer a Dial Up connection PCI is installed too, but I disabled it. I used Dial-Up in 2002. So, I need help.
  But I know that I can connect with this Ethernet card to the Internet because it worked for 3 hours, I've loaded the pages and downloaded programs.
  Please don't point, should I upgrade Windows!
  Thank you.

  Hi friend,
  You can try a Bing search on connectivity to Win ME, I don't know there are still a few old sites that are not taken down you will find a few FAQ on.
  I saw not a ME machine in too many years to count!
  Good luck on your adventure.
  B Eddie

• When you transfer files to the internet, the router disconnects from the internet, but the network remains in tact.

  I have a wireless router Belkin g with 1 Server 2003 cable and 2 xp machines and 1 machine vista wireless. My problem is when you transfer files to the internet, the router disconnects from the internet, but the network remains intact. I cannot remote in all computers, but not internet. Once I have restart the router, everything works fine. I was wondering if anyone else has had this problem and how to fix them.

  original title: problems with the router.

  I have no solution for you.  It seems more likely to me that it is a hardware problem - but if it was related to traffic, I would expect that the problem on the downloads more downloads.

  In addition to DSL reports, you could try to ask some of the forums that specialize in the updated firmware for wireless routers.  This is not to say that you need to install the modified firmware (although there may be good reasons to do so), but people who do usually firmware mods are much how the equipment works and what might be its potential failure modes.

  Is one of the best-known sites DD-WRT.com, but there is one list of other here: http://en.wikipedia.org/wiki/List_of_wireless_router_firmware_projects the firmware on these sites was originally designed to run on Modem Linksys WRT54G, but applies generally to Linux with chips Broadcom - based wireless routers and DD - WRT claims that its firmware takes care of some Belkin routers.  If your router is one of those on what DD - WRT will work, there will probably be someone in the forum there will have something for you.  See the list here: http://www.dd-wrt.com/site/support/router-database

• To send messages through the network (LAN, netsend and msg.exe) does not win 7... can u tell me the cmd

  To send messages through the network (LAN, netsend and msg.exe) does not win 7... can u tell me the cmd

  If any document available please send my email id

  Thank you & best regards

  Martine

  Hello

  Thanks for posting your query to the Microsoft forum.

  Please see the suggestions in the following threads:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/msgexe-netsend-anything-availible-on-Windows-7/e9743edc-AFA9-4942-b1c7-66baf443067b

  https://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/net-send-in-command-prompt-does-not-work/00ce5137-dff7-49e5-8511-943e55b83bd7

  Let us know if you need more assistance. We will be happy to help you.

  ___________________

  Thank you best regards &,.

  Isha Soni

• Cannot install applications through Microsoft store in Windows 8 Pro: using the internet through the proxy: detected 'No. Internet Connection' Error statement

  I study in a University, and we have access to the internet through the proxy. We just need to put in the proxy port: in the settings of internet explore and authentication additional etc. is not necessary to access the internet. Everything else is working well, including windows update and even browse apps in the store of Ms. But I'm unable to install any application. Help, please.

  In fact here in ITI, all our internet traffic is routed through a proxy (to stop the torrent, filter things etc.). To remove the proxy is not an option.

  I solved the problem by using the following commands as an administrator:
  netsh
  WinHTTP
  import proxy IE

• Unable to connect to the internet through the wireless network

  original title: this computer does not have an installed and configured wireless network adapter

  Hello, about a week ago I just reformatted my Windows vista computer, and now I do not have a wireless network and I cannot connect to the internet, I use another computer to do this, and only the network card I have is Marvell Yukon 8888036 PCI - E Fast ethernet controller. Please help I really wanet to go on the intrnet. My computer is mobile intel r 945gm express chipset controller 0 microsoft corporation wddm

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > looking for Vista drivers newer network adapters/etc > download/install the.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I connect to the internet through the dial upward through the computer another internet connection?

  If you want to tell me that MS will not support Windows 2000, please do not post. The computer on which internet Wi - Fi Connection has Windows Vista Home Basic on it. The computer that has WiFi but I want to test its dial-up access windows 2000 top. It has WiFi with utility that is necessary. It includes 12 Opera browser. As a resort last, if it is not possible at all means, ultimately, let me know how to connect to the internet through another computer via the telephone line through Internet connection sharing or network connection. Any help will be greatly appreciated. Remember, this is on the internet. Not on whether or not Microsoft does not support Windows 2000. If you tell me how it is not supported, please do not post. Internet connection will be between the two modems and two computer on Windows 2000, it has a LT Win modem and the Vista Home Basic has a CX110 in generation something like this modem. I ask this question is because my land line will not dial a number. I would like to test a dial, and if you tell me how it's slow, I use DC Unlocker to a broadband speed, so it won't be slow. Any help will be greatly appreciated. Windows 2000 has an Ethernet port.

  Hello

  1. are you referring to Windows Server 2000 or Windows ME?

  If you are referring to Windows Server 2000, please help the professional community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  http://support.Microsoft.com/ph/1131

  If you use Windows ME, visit the below mentioned link.

  http://support.Microsoft.com/kb/234815

• Problem to stay connected to the internet through the wireless router.

  I'm having a strange problem.  My computer will stay connected wireless for anywhere between 2-30 minutes before losing connectivity.  However, it works when I plug it into the router, which is what I'm doing now.  I have tried everything I can think of to eliminate the problem, but it has not changed.  Usually, once it shuts down it will stay off until I have change the frequency of router or something.  Reset the router works every time some time, but nothing is definitely the problem.

  I disabled ipv6, reset the router, update windows, restarted several times that I have unplugged router and modem, reconfigured frequency channel of the router, among other things.

  It must be a problem with my computer because my roommate both have computers that are working properly.  In addition, it is a relatively new problem.  I've had my computer for a few months now and it has worked well up until that 2 days ago.

  Any help would be greatly appreciated.

  Thank you

  Hello

  I would try the underside and then if no joy try a system restore to before this happened - don't worry
  the system restore without the bottom as the issue will probably come back. And if you always do
  a system restore and then repeat the underside when even because all will be back to old drivers and settings.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  --------------------------------------------------------------------------

  Please do this 1 and repeat if you need to do a system restore:
  
  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Problem of local connection only. -After a five-minute Internet connection, the network of the changes at the local level only

  I connect to internet at the top 3 mobile broadband using the supplied usb Huawei 3 modem. It was fine for the first 4 days, it was working perfectly until 2 days ago. Now it connects fine but after about 1 minute of connection (sometimes more, up to 5 minutes max) the connection of the changes at the local level only. I searched the forum and website I can find solutions, but nothing seems to work. If I click on diagnose and repair I get an answer that is different each time, such as 'There could be a problem with one or more network adapters on this computer' or "Cannot communicate with the DNS server" or sometimes it says there is no problem even if it doesn't quite work. Sometimes disconnect and then reconnect works but then after a minute it goes to the local level only again. Any help would be appreciated, it gets very annoying to have to disconnect and reconnect every time that I need to go to another page.

  Here is the procedure to empty the DNS: http://www.mydigitallife.info/2008/08/21/how-to-flush-and-reset-dns-cache/ - but even if it's worth a try, I don't know it can solve your problem.

  If this does not work, then I suggest strongly since it's only a week or older that return you it to where you have it for a replacement or a service while it is still covered by the warranty.  There are several possible causes and we could spend a lot of time searching to find that it's a hardware problem.  They also know their systems better than we do, and maybe it's a simple configuration problem that has not been defined in law or has been accidentally changed after the first 4 days. In addition, more you mess with it, you, more likely they will tell you caused the problem and the warranty - and you certainly don't want that.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Slow internet unless the network diags are running.

  My internet is very slow on my laptop.  I used Chrome, IE, and Mozilla... same result for all.  I tried running the Network Diagnostics and noticed that during diagnostic tests are running my internet speeds and seems to operate normally.  As soon as the diagnostic tests are complete internet failed way again.  What could cause something like that?  Thank you!

  Hello

  What is the brand and model of your computer?

  That there is a change of speed to the internet when you run the network diagnostic tool, you can also try to update the wireless network card driver and check.

  Refer to the following link suggestions. Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps.

  If the problem persists, you can visit the manufacturer's Web site and check if there are any updated drivers for your wireless card.

• Disable HA or use the Maintenance Mode when the upgrade of the network switches

  Hello

  We expect the upgrade to our network switches. In the case where the hosts loose network connection I want to avoid having HA suddenly and guests try to run current virtual machines. What is best practices for cluster HA-activated in case guests loose network connection?

  Disable HA or put all hosts in maintenance mode? Or is there another suggestion?

  Vickers

  If you are using vSphere 4 there is option to disable HA response to failure without disabling agents HA HA. This option has been added specifically for when you know you're going to do the maintenance of the network and that you do not want HA answer when the management network is down. It is much faster to do that that in order to completely disable the HA or put all hosts in maintenance mode.

• Unable to see the computers in the workgroup or server to print to my HP laptop, but I can all ping and access the internet through the router.

  I have a laptop HP with XP pro. I have a network with 2 computers laptops (Dell and HP), 1 office and 1 DP300U DLINK print server with a static IP address. I use a LINKSYS WRT110 router. Everything is connected through this router. I can ping ALL laptops, the office and the print server. I can access internet from all laptops and office. All THE MACHINES are in the same workgroup. Only from my DESKTOP (XP HOME), I can click on FAVORITES NETWORK, click VIEW group of WORK COMPUTERS and I can see the other compters and the print server. However, since my computer Dell laptop or HP LAPTOP (XP PRO) I can PING the router and the journal in it, all the other machines and print server but can NOT SEE THE OTHER COMPUTERS or ACCESS THE PORTABLE HP computer or the other laptop. I turned off all firewalls and firewall McAfee (PORTABLE HP computer) and still no joy. I think that there is a box ticked somewhere or the one that is checked and who should not, but I can't find out where it is or something else to look at. Any ideas would be appreciated.

  I suggest you take a look at:

  http://support.Microsoft.com/kb/318030/

  You can run fixit in the PC that encourage the problem this fixit automatically.

• Client VPN access router to the Internet through the same router! How?

  Hi all

  I already setup VPN users connect to our router 1841 and corporate network. Use Cisco VPN Client and connection ends on the interface Dialer1 in 1841. This interface is also our ADSL Internet connection.

  I need the VPN users out to the Internet via this VPN connection (it is through this Dialer1), rather than use the split tunneling and Internet browsing from their Local Internet service providers.

  Of course, this Dialer1 is also 'nat outside' and FastEthernet is LAN and "nat inside '.

  So I'll need NAT these VPN-pool addresses to address IP Dialer1. But what would be 'nat inside' in this case...

  Can anyone help?

  a loopback interface must be configured to "nat inside '.

  for example

  Loopback int 1

  IP 1.1.1.1 255.255.255.0

  No tap

  IP nat inside

  access-list 199 refuse ip<1841 private="" net=""><1841 private="" net="" mask="">

  access-list 199 ip allow a

  allowed policy-road route map 10

  corresponds to the IP 199

  set ip next-hop 1.1.1.2

  interface Dialer0

  political map of IP policy-road route