OfficeJet Pro 8610: logo will not be printed in color on my bills

Similar Questions

• HP Officejet Pro 8610-e: HP Officejet Pro 8610-e will not stop printing

  I am trying to print on paper legal and necessary only 5 copies. After spewing of 17 full copies and 4 partial, I turned it off in the hope that it would stop.  Fortunately, when I turned it back there.  I'm not a computer guru, so a lot of the phraseology of the aid might as well be Greek to me.

  I've had my printer for about a week now and have not had this problem because it happened first, but I would like to know how do I cancel a print job, just in case it never happens again.   It is also interesting that this happened when I was printing on legal-size paper.  (Thank God, I don't have to do very often!)

  Thank you in advance for any advice you can offer.

  When a document is printing (or was sent and is about to print), there will be an indicator at the top of the screen, with an X white within a circle and print.  Touch and it displays a screen with a rex from X in the lower left corner.  Press X to stop printing.

  Note that if a print job is always sent from the computer, it can take a long time for the printer to be ready for the next job.  The printer stops printing immediately when you press the red X, but the computer can continue to send the rest of the job that will be discarded by the printer.

• OfficeJet Pro 8600 Plus will not be printed

  I just bought a HP Officejet Pro 8600 Plus, and I've connected two PC and two iPads to it.  I also plugged on my Macbook Pro (iOS 10.6.8), but unlike four other devices, the Macbook will not print.

  The Macbook watch the installed printer, sends the print job, but nothing prints.  I reinstalled the printer, the driver updated and reset the system print, all nothing will do.   I know that the Macbook and printer can communicate because I can print a test page for the HP utility in the browser.

  You do not know this information helps, but I have observed in anticipation of eventually being removed from their own print jobs.  I also noticed that, strangely enough, a print job will appear in the queue, I try to print the levels of power, but I was not initialized it.

  What Miss me?

  (Btw, it's a wireless installation.  I read that others troubleshoot using a static address, but this isn't an option for me. My ISP router will not work with a static address.)

  After much research, I found someone else on this forum who has had the same problem and found a solution.  I post the link below in case someone comes on this post.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/OfficeJet-Pro-8600-will-not-print-on-Mac-OSX-10-7-5/m-p/2307027/highlight/true#M80392

• OfficeJet pro 8500 has more: Officejet pro 8500 has will not be printed sheets

  I have an Officejet Pro 8500 has more printer. I try to print the recipes on cards, but everytime I try to do my printer says "incorrect paper size" and then cancels the job. How can I fix it? I have a macbook... I don't know if it's part of the problem?

  Most programs running under OS X obey the size of default page defined by the Print Center/Printer Setup Utility preferences. A notable exception to this rule, however, is that Microsoft Word, which has its own system to decide what paper size to use.

  Change the default value of letter to A4

  Idea of what should be the default paper size is set in the Normal template. Go to Format > Document, and then press the button layout... . Set the size of A4 paper, and then press OK. Press the button by default... , answer Yes to the dialog box, and then press OK. - Source

  I imagine that this also applies to listings so instead of A4, you'd look for 4 x 6! Please let me know if that does the trick!

• OfficejetPro8500 WirelessA909g: Officejet Pro 8500 Wireless will not STOP PRINT the PAGES of ALIGNMENT - HELP Please

  I do not see or understand what is my problem. Program will not stop alignment, after I print a page from my laptop or a page of the scanner screen. Does anyone have asolution to this situation. Please advise me how to eliminate program alignment running like a mad man every time I print a copy. Way in advance I thank you...

  Have you done the annular alignment process to stop it?

• HP Officejet Pro 8000 Wireless will not be printed with the iPhone 5 s

  This printer as wireless that I bought used printing with IPhone or iPad in 2011 because is not on the list of Air printing devices so I was told by HP to buy a new and as it was not equipped "Eprint" HP app which is there to deal with it will not work. I was talking to sales person to avoid paying, but I can't believe this. There are printers better but makes no cela a throw away. and who wants to buy a wireless printer that used to print wirelessly? Help!

  Hi Hank, there.

  Sorry to hear that you are having a rough go with the printer.

  With respect to the 8000 wireless, I guess you've got a newbie on the phone tech rep. I couldn't understand why they said there is no work around, because I was able to get the older printers with HP troubleshooting documents. Some so that might help:

  1. install the printer on your network (if it isn't already) the software of the printer for a wireless network connection

  2. download the HP Mobile E-Print app for iOS. It should still work with non-eprint printers: https://itunes.apple.com/ca/app/hp-eprint/id299531647?mt=8

  3 take a look at this video tutorial for tips on getting started: http://www.youtube.com/watch?v=l1z1pSC8WHI

  Hope this helps

• HP Officejet Pro 8610: Urgent will not print of MYOB stuck on the queue

  Bought new HP all in one office, cannot print from online or programs such as MYOB. Click on print properties paper winding watch box, then nothing remains right on this continuous. I ran the Scan Doctor still does not. Worked perfectly prior use of the HP all-in-one. Plugged in usb, tried to use wireless, everything is installed. Please help, I am so far behind in my accounting because of the wait on a new desktop computer. Thank you.

  And by the way, HP helped great!

• OfficeJet Pro 8610: Need a feature to print overview of 8600 Officejet series

  Our library network environment is a challenge. I would like to plug into our ethernet with a cat5e cable network and be a part of our network printer, but I have to be able to print wirelessly from two Windows laptops. Unfortunately, our wi - fi library through the network of the city that is otherwise not available to us. When I plug the cable of the respectable wireless ethernet becomes unavailable.

  For now, I am attaching the printer with a USB cable to a desktop computer and I got the printer shared with another office.  But how do I print wireless to the printer for computers laptops windows?  Is the printer must be connected to a wireless router to print wireless? And can I order wireless printing and always plug into an ethernet network? Because I prefer not having to share the computer to another computer on the network for printing.

  Hello

  I'm afraid that the connection of the printer for cable networks and wireless at the same time can be made, the printer can be connected to a unique network, once connected an Ethernet wireless capability cable does not connect to a wireless network.

  However, you may be able to use wireless Direct, which can be used same onnce the printer is connected to a LAN.

  For that, you'll need spend your PC from the network wireless network printer in order to print...

  To access the internet, you'll need for the PC back to your wireless router:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8610-e-all-in-one-printer/5367603/model/5367606/document/c04090221

  Hope that help, it is more you could have for these needs...

  Shlomi

• HP Officejet Pro 8610: Problems for install HP Officejet Pro 8610 e-all-in-one printer on Windows 10

  We have a HP Officejet Pro 8610 e-all-in-one printer that is connected to the network.

  The printer is installed and can print successfully from 3 desktop with Windows OS 10.

  4 desktop pc with Windows 10 is not able to install the printer drivers.

  When addind printer with device to add the printer is recognized and installed, but only the driver scanner.

  We have tried to remove the printer some time but without success.

  Also, we tried using various HP and Assistant tools, but these tools can not install the printer driver.

  Adding the printer manual, also don't do not install us the printer driver.

  The only driver installed is the scanner.

  We are out of ideas, you can help us with all the great ideas.

  Sincerely,.

  Gilbert

  Hello

  I'm glad to hear that your problem is solved and everything works fine now.

  Good day!

• My officejet 6500 710 a will not be printed "printer e-mail address." Still stuck in the phase of 'connection '.

  My officejet 6500 710 a will not be printed "printer e-mail address." Still stuck in the phase of 'connection '.

  HP Pavilion D7, Windows 7, all parameters are good, network connected, all permit

  Hi ashkin1975,

  Please disconnect the power from the back of the printer for 30 seconds.  Plug in and turn on.

  From the front of the printer: configuration > network > network by default.  Now, in the same network menu, run the Wireless Setup Wizard.

• my printer is working, but it will not be printed in color and a new color cartridge is installed.

  HP Deskjet D4160 printer with the Windows XP computer. My printer is working, but it will not be printed in color and a new color cartridge is installed - what can I do?

  The steps in this troubleshooting page can help solve the problem.

• OfficeJet Pro 8610: No desktop Windows 7 printing and Officejet Pro 8610

  I bought and installed a new 8610 Officejet Pro about a month ago.  My desktop computer is a unit of HP Windows 7.  The printer is wireless.

  Until a few days ago, everything worked fine, but now I can't print anything from my desktop computer.  Printing from my computer MacBook laptop works very well.  Printing from my iphone is fine.  Digitization of the desktop computer is fine.  Webprinting is fine.  The printer icon has a nice green checkmark in the devices folder.

  I ran printing HP and doctor Scan, which claims to solve a problem of port, but does not solve the problem.

  I use windows to troubleshoot the connection, claiming to make the printer available to my homegroup, but it does not solve the problem.

  I tried to change the security settings for the spooler.  Has not solved the problem.

  I can not manually stop and star the spooler via prompt back.  Said system 5, access denied error.

  It's maddening.  I got rid of my old printer (which must be printed from the office) so that I could have a capacity of wireless printing, and now I have the ability wireless, but impossible to print from my desktop.  Aaaaggghhhhhh!

  Hey @steplaw,

  Thanks for getting back to me on this subject. Now I'll have to charge you another Officejet driver on your product. Because the network connection is fine, and scanning is still fine, I do not think that the problem you are experiencing is connectivity or related software. This driver replacement, I'll have to charge you will work exactly the same way as the e-all-in-one printer driver Officejet Pro 8610. Therefore, you won't lose all the features by this fix. Please, try the following steps.

  Step 1: Clear the temporary files:

  1. Click on the Start menu
  2. In the box "search programs and files" located just above to start after you click on it, type %temp% , and then press enter on your keyboard
  3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  5. Close the Temp folder when it is empty
  6. Right-click the recycling bin on your desktop and select empty recycling bin

  Please proceed to the next step.

  Step 2: Load driver replacing:

  1. Please click hereto download the Officejet driver
  2. Once the download is complete, you can get a command prompt to run the download. If you see the prompt run, please let it run.
  3. An extraction should now take place. When the extraction is complete, an install window can jump open. Please close windows install everything. You do not want to run a facility.
  4. Then, click on the Start menu. In the box "search programs and files" type folder and press enter on your keyboard
  5. When the Temp folder opens, find the file 7z. Click this folder to open it. It should include files that say OJ860
  6. At the top of this file, you will see a file path bar. It may show something like "computer - disc Local C - users - AppData - Local - Temp - 7z... " Left click on the right side of this path to file on the top bar. The path should now highlight.
  7. Right click on the highlighted file path and select copy
  8. Close the Temp folder
  9. Click on the Start menu
  10. Select the devices and printers
  11. Right click on your HP Officejet 8610
  12. Left click on printer properties
  13. Left click on the Advanced tab
  14. Left-click on new driver
  15. When the new window opens driver hit please 'Next' until you see a list of manufacturers and Printers
  16. Click the "disk" button at the bottom right
  17. When the "install from disk" window opens, we simply right click on the file path bar and 'Paste' in the path to the copied file previously.
  18. Click OK
  19. When prompted choose the HP Officejet 8600 printer and click "Next" until the driver window add farm
  20. Under printer properties , select apply, but don't hit not OK
  21. Select the general tab
  22. Rename your printer in HP Officejet Pro 8610
  23. Click OK

  Now that the other pilot Officejet was responsible, please test print in order to confirm if the printing problem is resolved.

  Please let me know if the steps I have provided resolve your printing problem. Good luck!

• OfficeJet Pro 8620: WiFi will not turn off

  Because of a problem with my modem compatible wireless (the problem being that its ethernet ports became defective), for awhile, I had turn the WiFi feature to provide Internet connectivity to my iMac.  Similarly, for the first time, I enabled WiFi on my HP Officejet Pro 8620 so I could keep a printing capability.

  Once my new modem arrived, I restored my complete ethernet network between the modem, my iMac (and other devices) and the Office jet printer 8620 Pro.  Everything works fine now!

  However, the printer Officejet Pro 8620 WiFi ability not shut down despite the operation by an ethernet cable and there is no WiFi from my modem.  I know the Officejet Pro 8620 always emits WiFi like my iPad and my iPhone indicate that it is.  As my wife is concerned about these RF transmissions that are on the other side of the wall adjacent to our bed, she asked me to turn off the Officejet Pro 8620 WiFi.  I've restored the "Default network" printer, but this is not the case.

  According to the instructions of the printer, 'Wireless does not work with an Ethernet cable connected to the printer' However this is clearly not there.  How can I solve this?

  Your WiFi is turned off.  Your wireless Direct is not off.  Disable wireless directly into the printer.   Info is in the User Guide.

• HP Officejet Pro 8600 N911a will not print from Windows 8.1

  I have a HP printer Officejet Pro 8600 N911a that returns the 72234 error code everytime I try to print a document from my Windows 8.1 desktop (HP 1520 t).

  Also, there is a single instance of error code 74899

  The same document prints fine on my Windows 7 Desktop and my Windows 7 Netbook.

  Firmware of the printer is: CLP1CN1416AR

  Firmware from the Support Page of the printer appears as: CLP1CN1322CR (2014-07-18)

  What should I do next to be able to print from my computer Windows 8.1.

  Steve

  Note: This is the first issue I had with this printer that was bought a year ago.

  Hello Steve, I hope you're well

  Thanks for getting back to me with your info!

  Yes, I would first of all, running the wizard of wireless configuration from the front panel of the printer (installation program, Menu, Assistant wireless network), make sure that the printer is connected to your network, then proceed to uninstall the printer, restart the PC and reinstall them both back on your computer.

  I hope that this is the solution!

  Have a great Monday!

• My HP OfficeJet Pro 8710 will not be printed in color. I use the cartridges supplied with the printer.

  I use a Mac OS X 10.6.8

  I had hoped to connect wireless, but it wasn't the priority.  What I need is a reliable printer.  I tried several times so that it can print in color, and it only seems to work when I run a test page for the printer itself.  The diagnosis page is 100% correct.

  Do not know what to do...

  V

  Grayscale is selected in the printer driver?