Internet TV does not appear on Windows Media Center

Similar Questions

• After clean install of Windows 7, Netflix and Internet TV plugin does not work on Windows Media Center.

  Original title: problem with Windows 7 Media center

  Is there anyway that I can replace the whole C:\Windows\ehome? There is a permissions issue, and I can't find a way to change the permissions...

  The only reason I want to do is I did a clean install of windows 7 and the plugin TV Pluzz.fr and the internet do not work on this computer and it seems to be no work around. But I have a PC where WMC works fine and I can replace the entire record of WMC and it should work like the other PC (I think).

  I could do if I ran linux or something, but I'm looking for something simple or a fix to this problem with WMC.

  Hello

  Thanks for the reply.

  It is too bad to know the steps in my previous post did not help to solve the problem.

  I would like to inform you that starting from September 20, 2012, the experience of Internet TV is no longer available. You can consult the following Microsoft article that has the same information:

  Cannot open Internet TV in Windows Media Center

  http://support.Microsoft.com/kb/2801382/en-us

  For problems with Netflix, I suggest you follow the steps in the Microsoft article and check following:

  http://support.Microsoft.com/kb/972496/en-us

  Also applies to Windows 7.

  Please answer us on the State of the question to help you further.

• After the use of commercial software, Netflix does not work in Windows Media Center.

  original title: a SOFTWARE UTILITY NOW NETFLIX in WMC ON VISTA PREMIUM 64 BIT DON'T WORK. ANY CONNECTION?

  WINDOWS MEDIA CENTER DOES NOT NETFLIX. INTERNET CONNECTION WORKS AND I AM A MEMBER AND WAS SIGNED IN. NETFLIX CHARGE UP AND I GET TO PICK THE MOVIE AND PRESS PLAY. YESTERDAY, 29/05/11 WMC GAVE ME A CANNOT PLAY, UNAVAILABLE TRY AGAIN LATER ERROR MESSAGE. TODAY, WHEN I TRIED IT AGAIN BEGINS TO CHARGE UP, I SEE THE CIRCLE OF ROTATION THEN THE SCREEN BECOMES BLACK AND REMAINED BLACK UNTIL I TOUCHED THE BACK ARROW (BUTTON). ALSO I DO NOT KNOW IF IT IS RELEVANT, BUT ON 27/05/11 I DOWNLOADED GLARY UTILITY SOFTWARE AND I USED IT, SO I DON'T KNOW IF I DELETED SOMETHING I SHOULDN'T HAVE OR UNCHECK SOMETHING WHICH IS SUPPOSED TO BE CLICKED, OR OFF A PROGRAM THAN WINDOWS MEDIA CENTER NEEDED TO RUN CORRECTLY. I HAVE NO IDEA. NEED HELP. ANY IDEA IS APPRECIATED. Thank you!!! FOR THE RECORD, I HAVE NEVER HAD PROBLEM WITH NETFLIX IN WMC BEFORE, IS THAT SUNDAY LAST.

  Hi liitkjay,

  There could be many causes for the issue. First of all, you can read the following article and try the steps to solve the problem:

  Known issues and limitations of Netflix on Windows Media Center for Windows Vista

  If you're still having problems, you can uninstall the utility software and check.

  You can view the following link to uninstall a program:

  Uninstall or change a program

  Hope this information is useful.

• Internet TV is not available in Windows Media Center

  I upgraded four machines to Windows 7. Two of them were clean installs and Netflix and Internet TV options are available. However, two of the machines made an upgrade on the spot and Netflix and Internet TV options are not available. Is there an update available so that I can update Windows Media Center on these machines? If this is not the case, how can I get that option?

  Thank you
  Bill

  The following has worked for me in the Canada:

  Open Control Panel, select clock, language and region

  Select the location to change and change in the United States

  Select the administration tab and change settings English (United States) system locale and save changes

  then delete the contents of the c:\programdata\ehome folder (I moved content in a folder temporary everything first just in case...)

  Launch Media Center, download updates, shut it down after receiving notification of download completed (if your not sure its finished, you can check the Media Center icon in the notification bar, if it has an arrow toward the low point over-buried on it, its download yet)

  restart the Media Center and select TV and Internet TV so the Guide should be there.

  Note some of the programming of a regional protection based on the ip address, so some channels will be always blocked

  I've read other messages indicating Internet TV once was performed for the first time, you can change the settings of the control panel you actual location, but I did not and does not check what I prefer to let my settings as USA because I think faster using the SAE measures instead of the metric.

• Netflix does not work in Windows Media Center

  original title: Center meaia Windows

  I use a gateway T-1412 SP2, AMD 64. For a long time, that I was using windows media center units to watch Netflix without problem. For at least 3 years. Now when I click on the Windows Media Center Netflix all I get is INTERNET CONNECTION (there was a data recovery problem. Check that your internet connection is working and try again.) Nothing has changed over the years. Then when I click on the button that says OK I get back to the main screen shots in Windows Media Center. I hope someone can help.

  Thank you

  Hello, Dan

  Try to contact Netflix for assistance.

  The following link may be useful:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-TV/unable-to-sign-in-to-Netflix-through-Media-Center/36fc180d-784b-E011-8dfc-68b599b31bf5?page=2

• Movie or thumbnails icons do not appear in Windows Media Center movie library

  Windows 7 Media Center and icons

  I created the correct path will my movies from my computer.  All other channels... work photos, my videos, my music... etc. However, with my films, I get icons of the movies I have in my library. I show movies and they play. But all, I have the written title of movies... not the photo. Can anyone help?

  Hello Sickboysd,

  In addition to the answers above, please relay if video files are located on the local PC. In addition, you can view the next thread of a similar question to the following Microsoft Web site, www.thegreenbutton.com , the official Windows Media Center community.

  http://thegreenbutton.com/forums/p/77618/382964.aspx

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The mouse does not work in Windows Media Center and computer

  I have not any known cable (CTI broadband) and have no box ar place anything I can use WMC, after I put the display on the computer of long I can divide 2 monitors display (two). 1 monitor 1. TV. move WMC on TV (although) now I can't move the mouse on the screen. While WMC is in TV, the mouse still there I can't move it to the monitor to use it and watch TV at the same time. How can I watch TV and work on the computer at the same time?

  Hello

  This behavior is by design, Alt + Tab is the work around. If you think that it should be replaced, you can leave your comments on the following link: http://mymfe.microsoft.com/Windows%207/Feedback.aspx?formID=195

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My DVD drive does not appear in Windows Explorer

  This morning my computer ran a scan virus and other things, and when this was done, my computer will not respond to any type of CD.  No DVD, CD or even disks with files stored on them.
  When I open windows Explorer, the drive from DVD (e) is not even more appear.  I was wondering how to fix this.

  Hello

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Combo DVD/CD drive does not appear in Windows Explorer or the Device Manager

  The combo DVD/CD on my laptop drive isn't in Device Manager or Windows Explorer.  The door is not ejected.  You must use a paperclip, poking into the hole to open it.  I also re - it sitting, but it changed nothing.  We had this laptop for 1.5 years and the disk worked great until yesterday when trying to install Starcraft II.  Installation failed and it has messed up also the DVD/CD drive.

  We read some other difficulty advice and tried the upper and lower filters in the registry, but there was no entires of upper and lower filters in the key.

  The specifications of the laptop are:

  HP Pavilion dv7

  Processor Dual-Core Mobile RM-72 2.10 GHz AMD Turion X 2

  4 GB OF RAM

  64-bit Windows Vista

  Hello

  Check with HP Support, their online documentation and drivers, and their known forums
  questions.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Media Player: I can't find a way to create a burn list, because the music does not appear in the media player library

  Hi all

  I loaded music from a USB key for the 'my music' folder in the document library, even though I can play music through media player, I can't find a way to create a burn list, because the music does not appear in the media player library - can you please help?

  Thank you

  Yvonne

  No need to copy and paste.  Simply add the folder that contains the music files to the library in this same dialog box.

• Windows displays the device works correctly. However, the device does not appear in windows Explorer. also, I can not format disks.

  Windows displays the device works correctly.  However, the device does not appear in windows Explorer. also, I can not format disks.

  What should I do next

  Hello

  1. Are you referring to the NEC USB Floppy Driver?
  2. You try to format floppy disks?
  3. Was - this earlier work, if so, did the chnages on the computer before this problem?

  If it worked, I suggest the following methods and check the status of the issue.

  Method 1:

  Open the hardware and devices troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Windows Media Center tells me that I have sm not connected to the internet, but I'm out of windows media center I can access the internet. Why?

  Windows Media Center tells me that I have sm not connected to the internet, but I'm out of windows media center I can access the internet. Why?

  Disable the firewall and check the connectivity in media center.

• HP P6130Y: Secondary hard drive does not appear in Windows Vista - 64 Bit

  I installed the second SATA drive in my HP 6130Y, a 1 TB WD Black. HE appears during startup, is displayed in the home page of the BIOS password HP PC-Doctor and SMART BIOS tests.

  But he does not appear in Windows Vista 64-Bit.

  My current setup is configured as follows:

  • SATA1 - Seagate 750 GB SATA drive
  • SATA2 - DVD
  • SATA3 - new WD 1 TB drive.
  • SATA1 controller is set to RAID.

  Thanks for any help you can provide!

  Hello

  Go to Administrative Tools--->---> Disk Management in the computer management and expand the screen entirely.

  Now, look for the new drive, right mouse click on it if you see initialize and then format the new hard drive.

• AirDrop does not appear in the control center on my phone.

  AirDrop does not appear in the control center on my phone. Is it possible to 'light' another way. I would use it but he's not here

  Check under restrictions. Settings > general > restrictions > make sure it is on sub "allow." Also make sure that the wifi and bluetooth are on. -AJ

• Error: "Tuner not found" with Windows Media Center

  Original title: someone at - there a solution to this problem of Tuner not found with Windows Media Center? I tried for several years to find an answer to this embarrassing problem without success.

  I did just about everything, including a restoration of the complete system without success. It would be nice to be able to use my Windows Media Center to watch live TV and record programs I would like to see later.

  There is a great thread to
  http://h30434.www3.HP.com/T5/desktop-hardware/ViXS-pure-TV-U-48A3-TV-tuner/TD-p/52529
   
  with people have reported this problem with this tuner.
   
  Unfortunately, it looks like the only solution people have found is to replace the
  Tuner with another brand.
   
  I don't know if it's the hardware failure or something else, but looking at this
  wire, if it was ME, I cut my losses and replace the tuner.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question