Inverse problem LabWindows

Similar Questions

• Project Manager and inverse problems.

  Hey there,

  I work on a timeline and when I press manage it I get the zebra stripes for some clips which reversed the speed. The clip will be freeze framed for some time according to the length. I do not think, it is for everyone, but we had problems with this for multiple projects.

  Info:

  ProRes 422 1080 p timeline.

  All clips are transcoded to 422.

  I don't think it happens on the clips that are nested.

  In my view, that he only reversed clips.

  At this point, I am of the workarounds and will post if I find them, but can someone explain why this is coming?

  Change

  -AKChannel

  Any chance you are applying speed reversed for a clip that has more than one example used in the sequence? for example: Set and In/Out for a clip and a place in the sequence. ITC still down clip and In/Out set and add to the sequence. Apply reverse speed speed/duration. Transcoded clip with rear gear shift will be a unique setting with danger strips.

  This scenario is known and we're investigating.

• IPv4 NAT in IPV6 for Internet access

  Advanced thanks.

  New Internet transport is incoming.

  IPv4 and 6 addresses are available for use.

  A notion exists that any V4 address assigned to we were able to be used elsewhere and is, therefore, a security risk potential (I have trouble understanding this fear. Please do not hesitate to comment be it).

  He is asked if it is possible to NAT the address private to a supplied bracket V6 public address range.

  I've read so far no indication that this is possible.

  If anyone knows otherwise, I welcome your comments.

  Thank you

  IPv4 and 6 addresses are available for use.

  Well Yes.  V6 is more than 50% of the data traffic of cell LTE4 in the United States, more than 40% of traffic in backbone of the Belgium, tends to work better than the v4 for mobile devices, etc.  It's true.  We are in the interregnum of double-internet, where not all clients can talk to all servers, until the transition of the v6 is over 15 years.

  ... no matter what V4 address assigned to we were able to be used elsewhere and is, therefore, a potential security risk

  Because the IPv4 address space is commonly used around the world, most ISP are turning to 'carrier grade NAT' where customers share the overall scope of intellectual to a NAT upstream.  The reputation of the internet of such middlebox will trend down in the most infected client / badly behaved behind it, which is always going to be a zombie botnet.  Could collateral damage to the protocols used by perfectly well-behaved clients that also share the catwalk of the GNC.

  During this time, you can not new the regional internet registrys IPv4 subnets, so your only effective source of additional IP space is to pay for a transfer to someone else.  The transferred subnet was probably already in use and so can be on blacklists to email spamming or have blackhole routes to the backbone of the ISP.  He could have previously also housed nuisance attractive such as banking or services of Paris that are often being DDOSd because of the inertia of the miscreant.  This can take time and effort to clean.

  Recycled IPv4 addresses that are actually working for you are not particularly more at risk than the addresses of archaic origin question from a security point of view; mainly, endpoint software quality-controlled not by mere reputation.

  [it is] NAT possible range of addresses private to a supplied bracket V6 sound

  Sort of.  The usual problem is that a client v6 only (say, a cellphone LTE4) tries to join a v4 service only (for example, a typical business web site).  This requires 6--> 4 translation; for that this week the default mechanism seems to be "464xlat".  The customer gets two v6/64 prefixes, transport v6 only and a private address v4 which is in tunnel on the secondary prefix to a carrier grade NAT64/DNS64 middlebox.

  The inverse problem of a customer only v4 trying to reach the Server v6 only is usually academic; usually you dual-stack to the client instead and there aren't many services only v6, although this will change.

  The IETF has downgraded RFC 2766 NAT - PT for the translation of v4 to v6 historical belonging, meaning it is not recommended for use on the internet in general, in the RFC 4966.  In addition to all the usual problems of NAT, NAT - PT does not work across ISPS due to the inability to get the right DNS46 TTL values.  If you try only translate a small subnet of a single body, say a v4/24, you might be able to find a software that did it, but it's the wrong way to take.

  If the problem is that the customer support not double stack v4 + v6, switch to something produced in this century; even windows XP can be dual-Stack if offer you it DNS on v4.

  If the problem is the ISP offer v6-transport, tunnel traffic v4 across this gap v6 to a double gateway to battery.

  -Jim Leinweber, WI State Lab of hygiene

• Problem with function "BD" in TestStand/LabWindows

  Hello, good day.

  I am having some problems with connection BD function I use in a personal function inside a DLL.

  I had a function called GetSensor , which I know it works because I have used and tested in the LabWindows environment.

  Its function is to return the value of an element in my database to give its input parameter, just that.

  

  My problem comes out when I tried to use this same feature in TestStand, it seems that the BD can only function in the same way of when used of LabWindows because always display a warning message, which is display only when the values of iHdbc are iHdbc is 11 or iHdbc is 10.

  

  

  The software that I use are:

  

  I know that TestStand is the opening of my DLL locks function it always enter, but failed the part then try to connect to the database.

  I think that this could be a problem of compatibility with LabWindows, TestStand, but I can't find where I can change some options to solve this problem.

  Thanks in advance. Any help you could give is welcome.

  I coud not answer before.

  The solution to my problem with the BD connection function should use NI TestStand 2014 (32-bit) instead of the version of NI TestStand 2014 (64-bit) that I used. Just that.

• Problem with the connection to USB6008 OR LabWindows

  Hello world

  I make a program in LabWindows and so far, I've had two instruments running without any problem. But I try to add a USB6008 OR the program. I downloaded something called "NIDAQmxBase" and has added a file called "NIDAQmxBase.h" but I can´t find the file ".fp" and so I have no function to communicate with the instrument.

  Can someone help me?

  The 6008 can definitely use DAQmx.

  Without worrying about the chouce on the daqmx package to install, you must install it AFTER the CVI has been installed, and in the installation process, you specify to install support for this development environment.

  After that, you should see daq function in the menu of the library (if the corresponding item is gray, go to library > customize, mark the check box, press OK and restart CVI to see the menu filled with the functions of data acquisition).

• Problems of the inverse tangent function

  Hello

  I try to use the function trigonometric "arctangent", but it does not work because I think that it should. I want to change a gradient at an angle, normally on a calculator, I use height divided by the length and press the tan ^-1 (inverse tan) function and get the angle. For example, the inverse tangent of 1. 45 (degrees) If I use the inverse tangent function in Labview 2010, I get a completely different = 0.7853 result... I use it wrong or the function does not work correctly.

  I've attached an example so that you can reproduce the result. I also had a similar problem with sin and cos in the formula of node structures.

  Thanks for any help you can give,

  James

  Hi James

  I have not seen your VI. I know, given out by the trigonometric functions in Labview is expressed in radians. You need to radian to degree conversion for the response under 45.

  Concerning

  Javed

• Suddenly have a problem starting LabWindows CVI 7.0 on XP system

  I've been using LabWindows CVI version 7.0 on a Windows XP operating system.  Earlier in the day, I changed my system screen resolution and was working with the applications.

  Everything seemed to work, but at some point, I finished the session, then restarted.   Instead of leaving, I have a Message popup that says "Index passed is out of reach" and the CVI application closes.

  I tried to reinstall CVI original cast CD.  When everything was installed I get the same message when you attempt to start the CVI.

  Anyone have any idea what could be wrong?

  I vaguely remember having a similar problem a few years ago, because I think that something in the windows registry fixed - but I'm not sure.

  Thank you

  Sweeney

  Well, I tried to remove the entries from registry for National Instruments.  After starting and seem to work.

  PROBLEM SOLVED

• Problem with function "BD" in LabWindows/TestStand

  Hello, good day.

  I am having some problems with the connection BDfunction.

  I had a function called GetSensor , which I know it works because I have used and tested in the LabWindows environment.

  Its function is to return the value of an element in my database to give its input parameter, just that.

  

  My problem is that when I tried to use this same feature in TestStand, it seems that the BD can only function in the same way of when used of LabWindows because always display a warning message, which is display only when the values of iHdbc are iHdbc is 11 or iHdbc is 10.

  

  

  The software that I use are:

  

  Thanks in advance. Any help you could give is welcome.

  The solution to my problem with the BD connection function should use NI TestStand 2014 (32-bit) instead of the version of NI TestStand 2014 (64-bit) that I used. Just that.

• problem with LabWindows CVI

  Hello I m trying to create a Setup program for an application created in a previous version of Labwindows CVI which one don't know locks I get just the file sources, I m working with the 2010 version, the problem is that the application is running in debug mode but when I run in release mode the application does not work only the icon in the taskbar is indicated but the GUI never appears, someone can help me with this

  Thanks for your help, the problem was not with the code and was not with the RT engine version, was a misconfiguration in the compilation release configuration, I myself do not add external sources dll´s and lib´s in the plug-ins option in the settings of the target

• JNI and Labwindows/CVI linking problem

  I am trying to connect to the server in Java through LAbwindows CVI DataSocket.

  I am able to create a dll. Everything works fine with no error in compilation or execution, but when I run the DS_OpenEx cannot return a native class.

  If anyone can help me with the problem.

  Thank you

  Hello

  Could you better clarify the implementation that works properly and implementation that does not work properly?

  1 are you connected to the DataSocket with Java source code and you are trying to communicate through this source of Java through LabWindows/CVI?

  2 are. what environment you able to successfully create a DLL?

  3. can indicate you what environment survey code error and what this code?

  ADri - K

• Problems of Protel 99 SE with LabWindows.

  After the installation of LabWindowsCVI 8.5 I had some problems running Protel99SE SP6.

  I ran the installer Protel99SE SP6 and selected the option FIX for Protel runs again.

  Now when I launch LabWindows project file icons appear as Protel99SE icons but they seem to run ok.

  It seems to some confusion of data between these two applications.

  Has anyone else seen elsewhere or similar behavior?

  Salvation OR Nubia,

  The icon displayed for a file just indicates what program is set to run by default, so it won't be a problem with the implementation of your projects in the CVI.  If you want to change default for CVI projects, you can set this property in windows through these steps:

  1. "Right click on one of your CVI projects, then select Open with" choose program...
  2. In the menu in the new window, select CVI.  If CVI is not present, click Browse to access to this
  3. Make sure that the check box to apply the settings to all files is enabled.

  I hope this helps!

• LabWindows CVI GUI problems on XP Embedded

  I developed a CVI 9.0 application that works fine on XP Pro.  On an XP Embedded system, however, when the application is started the GUI came but it appeared that all the text labels are absent and some controls showed no right.  I could click on the controls and the application does what it was designed to do.  I thought that maybe some of the font files had disappeared so I copied all the files from XP Pro system fonts and installed on the XP Embedded system but it has not fixed the problem.

  See the attached screenshots...

  I developed an application with CVI 6.0 for a XP system eight years ago and it works fine on the XP Embedded System.

  Has anyone seen this problem?

  I solved the problem simply by going to regional & Language Options Advanced and set to English (United Kingdom), then back to English (United States) and that some how my problems solved.

• Problems linking Intel MKL in LabWindows

  I would use the Intel Math Kernel Library (MKL) LabWindows.  However, I get an error from the linker (symbol undefined when I try to call a function of the MKL).  The functions I want are the libraries of the FFT (DFTI).  I have included the files 'mkl.h' and 'mkl_dfti.h' and add to my project as well.  I tried also to add the /Qmkl compiler flag when compiling using the Intel compiler.  It became really frustrating, I don't know what has not added / included / are not linked.

  Someone at - it use the MKL correctly in LabWindows?  Have what libraries you added?  Thank you!

  
  

• USB/Virtual COM port Communication problem with ESP301/LabWindows/CVI

  Hi all

  I have gone through different threads posted in this forum for similar issues and all tried, but nothing helped.

  I'm trying to communicate to the ESP 301 training monitor via a USB port configured as a serial COM port using a CR. Have it ' command is to get the version of the controller. The "write" "ComWrt" command works fine but the read command throws and error ("-99 operation e/s timed out"). I tried all the suggessions; with delays etc... who has explained (resolved by Mr. RobertoBozzolo) in the thread posted here, which explains an issue similar to that of the mine, but the help couln t.

  The code is attached.

  I am using 2012 LabWindows/Windows7 64 bit multi-hearts

  int Get_Version () {}

  comport = 3;

  BaudRate = 9600;

  parity = 0;

  DataBits = 8;

  StopBits = 1;

  inputq = 512;

  outputq = 512;

  ctsmode = 1;

  xMode = - 1;

  Timeout = 5.0;

  com_status = 1;

  char comstring [6];

  DeviceName [] = "COM3".

  Int State = 0;

  char * error;

  int bytes_written = 0;

  char Cmnd_String [50] = "";

  char Read_String [512] = "";

  strcat (Cmnd_String, "ve?")

  strcat (Cmnd_String, '\r');  Tried to 0x0d
  strcat (Cmnd_String, '\0');

  length = strlen (Cmnd_String);

  assert (Cmnd_String [length] == you? \r\0'); Tried Cmnd_String [50] = ' VE? \r\0 ".

  DisableBreakOnLibraryErrors ();

  RS232Error = OpenComConfig (comport, devicename, baudrate, parity, stop bits, inputq, and outputq data bits) ;// tried ouputq = - 1 too

  EnableBreakOnLibraryErrors ();

  If (RS232Error == 0) {}

  com_status = SetCTSMode (comport, LWRS_HWHANDSHAKE_CTS_RTS_DTR);

  MessagePopup ("Comport verified',"CTS Mode works very well");

  com_status = SetComTime (comport, timeout);

  }

  bytes_written = ComWrt (3, Cmnd_String, (Cmnd_String) StringLength);

  If (GetOutQLen (3)! = strlen (Cmnd_String))
  ComWrt (3, Cmnd_String, strlen (Cmnd_String));
    
  status = ReturnRS232Err ();      The status is 0
  error = GetRS232ErrorString (status); / / error number

  Delay (5.0); / / trying to add the time up to 20.0

  GetInQLen (3); Returns 0

  ComRdTerm (3, Read_String, 512, 13); Read from inputQ

  status = ReturnRS232Err ();               Status to return the error code '-99 '.
  error = GetRS232ErrorString (status); Error message "e/s timed Opération" out

  return the situation;

  }

  Can anyone suggest where I am doing wrong?

  Thanking you in advance.

  Another thing you should check is baud rate.  The ESP301 by USB is expected than the baud rate to 921600.  The function for OpenComConfig() group implies that it does not support this baud rate setting, but it seems to work perfectly.

• Problem of inversion of planning with ODI

  Hello
  
  I use ODI 10.1.3.5 with planning 11.1.2.2 in 64-bit platform.
  
  
  I'm back off to a planning application in the designer, but it is throwing error:
  
  org.apache.bsf.BSFException: exception of Jython:
  Traceback (innermost last):
  
  "< String >" file, line 32, inside?
  
  com.hyperion.odi.planning.ODIPlanningException: could not connect to the instance of planning on the host [hostname], [11333] port, check if connect you are correct.
  
  The connection information is correct.
  The register RMI Hyperion service is started.
  
  Can you help me?
  
  Thank you
  Stefania

  I don't know if 10.1.3.5 is certified with 11.1.2.2, I thought it would probably be at least + 10.1.3.6 and it is usually best to run patches later.

  Common problems of connection with the RMI are due to problems of firewall port, it is also useful to check that the RMI certainly is listening on that port, because commissioning does not always guarantee that it is fully up and running.

  See you soon

  John
  http://John-Goodwin.blogspot.com/