iPad 2 crashes repeatedly even after system restore

Similar Questions

• Hi, I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair o

  Hello

  I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair the permissions. I also used the Ctrl + C and CTRL-Z commands in the Terminal to leave the alfred_script, but nothing helped. I'm running out of ideas here, so I hope you could help me either reinstall the mail.app. I could always just switch to a different mail application, but it's kind of a last resort.

  Code:

  Tell application "Mail".

  Define allAccounts on each account name

  Repeat with currAccount in allAccounts

  the unreadMboxes value (each mailbox to the account currAccount the unread number is not 0)

  Repeat with currMbox in unreadMboxes

  (read status of each message to currMbox including the playback State is set to false) true value

  end repeat

  end repeat

  tell the end

  Any input would be greatly appreciated. Can post the report of crash on demand.

  Not sure that Alfred's, but it's just an Applescript script and it would not cause Mail to be planted.

  However, when running through all the messages, it is possible Mail database has been corrupted and it crashes because of this.

  I'll probably get anything out of the accident report, but others might.

  My first instinct would be to rebuild the mailbox. Because you can't do that with him crashing, you can simply delete the databases and it will rebuild them.

  Navigate to this folder:

  ~/Library/Mail/v3/MailData/

  You can either manually through the files, or copy the full path and paste it into go the folder in the menu go to the Finder.

  Remove the envelope Index files. Open Mail and see if it works well.

  If your library does not appear in your folder, hold down the Option key and select library in the menu go to in the Finder.

• System Volume Information folder 23 GB even when system restore is turned OFF. All backups shadow removed

  Dear users,

  I am facing a very strange problem and I tried to solve this problem for more than a month, but no use. I called the Support technique Microsoft in India and they send me the details to email customer support to get this addressed redirected.

  QUESTION to the folder System Volume Information in Windows 7 is 23 GB of my SSD. My SSD capacity is 120 GB. If this space takes more than 20% of my total space of SSD.

  

  I turned off the system restore feature and it is noted below.

  

  The system restore is turned off as shown below

  

  Space Ghost maximum allocated memory is about 500 MB. There is no current backup shadow

  

  CAN U PLEASE HELP ME TO RECOVER THE PLACE OF 22 GB WHICH IS ALWAYS PRESENTED AS TAKEN TO RESTORE SYSTEM FILES? EVEN AFTER THE RESTORATION OF THE SYSTEM AND BY REMOVING ALL THE BACKUPS OF THE SHADOW, I'M NOT ABLE TO RECOVER THIS SPACE 22.7 GB

  I'll have a 120 GB SSD and more than 20% of the space is getting lost here

  I am running Windows 7 Professional 64 bit on a Dell E6220 laptop

  No virus / Trojan horses and system completely clean. Looking for Solutions...

  Run the Disk Cleanup Wizard (be sure to include system files)

• Question of Bootcamp, even after the restoration process...

  Hello

  I still have this problem Bootcamp launch even after trying restore OS X via Internet and Time Machine

  Please can someone help me rebuild my disk of any merger manually?

  

  Here is my list under terminal diskutil:

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * TB 2.0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 1.4 TB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: EFI 104.9 MB disk0s4

  5: disk0s5 Apple_HFS UNTITLED 16.8 MB

  6: EFI No. 104.9 MB disk0s6 NAME

  7: Apple_HFS BOOTCAMP 543,5 GB disk0s7

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage Macintosh HD 121.0 GB

  3: disk1s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 1.6 TB disk2

  Logical volume on disk1s2, disk0s2

  BFB9BB15-3247-48C4-A376-F329FBC563C3

  Fusion unencrypted drive

  Thanks a lot for your help

  Do you have a backup of Mac OS x Time machine?

  Please after the release of cs diskutil list.

• NEED DRIVERS AFTER SYSTEM RESTORE

  HP Pavilion g6-2128tx Notebook PC 
  Serial number: 5CD2231LJF

  {Information}

  After system restore a bunch of drivers was missing, I managed to update some drivers but I need some I can't find. Help!

  Hardware ID

  Ethernet controller:

  PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C & REV_05

  BCM20702A0

  USB\VID_0A5C & PID_21E3 & REV_0112

  PCI device

  PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C & REV_01

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_183E103C & REV_04

  SM Bus controller

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_183E103C & REV_04

  (USB) Universal Serial Bus controller

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C & REV_04

  I run on Windows Ultimate-64-bit

  Help would be GREAT

  Hello

  Download and install the following.

  Chipset Driver - Windows 7.

  After this Setup is complete, restart the laptop.

  Realtek software LAN.

  Broadcom Bluetooth 4.0.

  Realtek card reader driver.

  Intel Management Engine Interface.

  Intel USB 3.0 Host Controller Driver.

  Kind regards

  DP - K

• Impossible to uninstall Symantec Endpoint Protection after system restore

  Hello
  a program has been uninstalled (Symantec Endpoint Protection)
  After have rebooted and still have problems to install a newer version, I decided to do a system
  Restore prematurely, I uninstalled the original version.
  (Since I couldn't find the installation files or my license info)

  The old version worked again.  Now I am able to start the
  new version, the old version will not uninstall.

  It just sits there in a small box with a bar saying Windows of progression
  in the configuration of Symantec Endpoint Protection and it remains as it
  for as long as I left, at least 25 minutes.

  I thought that the system restore would put things back exactly as they
  have been, but it's apparently not the case.

  OT: Impossible to uninstall after system restore

  Any ideas on that?
  The OS is Windows 7 Pro 64 bit 64-bit.
  I found this, but have not yet tried.
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us

  I was able to cirumvent the problem by a selective startup in Msconfig.

  I disabled all startup items, all services not MS, restarted and then uninstalled

  successfully.  However, I met another strange problem.

  After uninstalling old version, I rebooted (the system was still selective

  startp) I put a new restore point and installed the new version successfully.

  Later, realizing msconfig has been arrived at "selective", I went and

  has tried to return to Normal startup.  However, when you select normal

  and hit 'apply', it immediately jumps to selective.  I have never seen it before.

  I didn't know how to solve.

  Instead, I uninstalled the new version of the AV program, jumped to the restore point

  I did before I installed, rebooted, open Msconfig and have been correctly set up

  In normal mode.  Then reinstalled the AV.

  Everything is OK now.

  You ever heard of this problem of msconfig before?

• My subscription Creative Cloud amounts and the teacher would not be repeated even after update payment information

  My subscription Creative Cloud amounts and the teacher would not be repeated even after update to payment information. I tried many times in the past two months, updating credit card information and I was never renewed. Subscription keeps saying expired beyond the 24 hour mark it says it will take. I have double and triple checked the information of credit card and have recorded several times. I also never get an e-mail confirmation or an e-mail saying that he had a problem. It is also very frustrating that it doesn't seem to be a customer service number to call especially for customers who have paid for the subscription of creative cloud. Help, please!

  Phone support | Orders, returns, exchanges

  http://helpx.Adobe.com/x-productkb/global/phone-support-orders.html

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• His lost after system restore

  Recently I did a system restore, after that my computer has crashed and everything seems to be OK except for the lack of noise coming from my speakers. This isn't an uncommon problem because I found a bunch of stuff on Google, but nothing I tried worked for me and I'm frustrated. I tried to uninstall the device from Device Manager, but even if I have it and restart the computer, he manages to resettle in any case, and yet I still have no sound. Everything seems OK despite these problems. I tried to download the latest drivers and their installation without success. Update the drivers does not work either. So, I wonder if someone can help, and if you manage to get through this, I'll save a song as a tribute for you 30 seconds. Yes I know. I'm quite desperate.

  This may be of some use for you guys:

  Value of the property
  Device ID HDAUDIO\FUNC_01VEN_10ECDEV_0888SUBSYS_10192111REV_1000\41AF0929E00301
  Status 0x0180200a started
  Blocking problem 0 x 00000000 (0)
  Service IntcAzAudAddService
  Blocking capabilities 0 x 00000000
  Config flags 0x00000000
  Class MEDIA
  Manufacturer Realtek
  Hardware ID HDAUDIO\FUNC_01VEN_10ECDEV_0888SUBSYS_10192111REV_1000
  HDAUDIO\FUNC_01VEN_10ECDEV_0888SUBSYS_10192111
  Compatible IDs HDAUDIO\FUNC_01VEN_10ECDEV_0888REV_1000
  HDAUDIO\FUNC_01VEN_10ECDEV_0888
  HDAUDIO\FUNC_01VEN_10EC
  HDAUDIO\FUNC_01
  Class GUID {4D36E96C-E325-11CE-BFC1-08002BE10318}
  Location internal High Definition Audio Bus
  Bus number 0x00000000
  Name of the enumerator HDAUDIO
  Description Realtek High Definition Audio
  Driver {4D36E96C-E325-11CE-BFC1-08002BE10318} \0005
  Name of the object physics \Device\000000a2
  Number of UI 0x0000ffff
  BusType GUID {41203534-2037-3144-2042-422044362041}
  Former bus type 0x00000005
  Type of device 0x0000001d
  Installation state 0 x 00000000
  The device address 0 x 00000301

  Oem2.inf of device Configuration file
  CoInstallers32 RtkCoInstXP.dll, RtkCoInstaller
  AssociatedFilters Wdmaud, swmidi, redbook
  Pilot RtkHDAud.sys
  InfPath oem2.inf
  InfSection IntcAzAudModel
  InfSectionExt. NTx86
  ProviderName Realtek Semiconductor Corp.
  DriverDateData 00 40 18 67 CA 01 E7 D7
  DriverDate 17/11/2009
  DriverVersion 5.10.0.5983
  MatchingDeviceId hdaudio\func_01ven_10ecdev_0888
  DriverDesc Realtek High Definition Audio
  SetupPreferredAudioDevicesCount one

  Class MEDIA
  Audio, video, and game controllers
  Installer32 MmSys.Cpl, MediaClassInstaller
  MmSys.Cpl, MediaPropPageProvider EnumPropPages32
  Troubleshooting-0 hcp://help/tshoot/tssound.htm
  Icon 3004

  Thank you!

  You can try to contact support from Realtek:

  http://www.Realtek.com.tw/contact/

  Also, try to run this fixit:

  http://support.Microsoft.com/mats/AudioPlayback/

• Safari bug/adware/malware won't go even after full restore

  Hello

  I can't get rid of a bug that continues to make windows pop up or forcing me on stupid 'you have won a prize' sites, even after having repeatedly a clean full restore (no backup) of the iPhone. I thought he might come back through the data of Safari in iCloud, but it happens even when I don't sign in iCloud in the newly restored phone.

  After that I restored the iPhone happens almost immediately when I open Safari and go to a website, and I'm not on first order as bbc.co.uk sites. The following pop ups and websites keep appearing:

  

  Here are two examples, but others arrive. I am on iOS later and have deleted all the data browser Safari etc.

  Really can't believe it happens immediately after a completely fresh restoration... it seems that the bug is in the iOS data!

  Thank you very much

  Daniel

  Go to settings > Safari > clear the history and data from the Web site. After doing this, you can still open Safari and go about your normal browsing.

  I noticed that the two examples you listed seem to be linked to Facebook. I have my own personal struggle with what I now called bad links in my Facebook News feed. Clickbait sites that you get tire to begin plaguing your screen with ads and even permanently redirect you to another site like the one you see here. It is an annoyance, but is not one that is clean in iOS. You can have all the pleasure of dealing with similar experiences click on bad links on your computer as well.  It's a question on the web.

• DV6 - 6153cl drivers for biometric devices missing after system restore

  Hello

  I have a HP Pavilion dv6 - 6153cl Entertainment PC with Windows 7. I used the fingerprint reader, since I have my laptop. The scanner has stopped working.

  Background: two weeks ago, I downloaded the latest version of Norton 360 (Version 21.1.1.7), which caused my laptop to keep crashing every few hours. After much time consulting technical support, I did a system restore to a few days before the new version download then downloaded the version of Norton 360 and active. This solves the problem of crash.

  Problem: After restoring the system, my fingerprint reader no longer works. By control panel > all Control Panel items > biometric devices, "Windows do not have the biometric devices on this computer. You will need to attach your device or install device drivers. "Can someone tell me what are the correct drivers that I need and where to find them?

  Thanks for your help!

  Hello

  First of all, download and reinstall the driver Validity Sensor on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55109.exe

  Once completed, restart the laptop.

  If it still not works, you may also need to reinstall HP SimplePass on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54680.exe

  Yet, when it has installed, restart the laptop.

  Kind regards

  DP - K

• M57 6072CTO no usb after system restore

  I just did a system restore by using the disks IBM XP SP2 and none of the USB ports is enabled once windows starts to boot, os I have no keyboard or mouse and no other way to access the computer.

  No idea how I can get around this (there is no PS2 Connector)

  Thank you

  Peter

  The problem is I was impaitent Walker do the restore I that the aircraft had crashed so not restarted so no usb.

  I did the restore of the system again and he left running while doing other work, and that's all OK after that

• No Internet connection after system restore

  I had problems to open Windows Live Messenger last night, and I tried to do a system restore, as I noticed there were a couple of updates that have been installed throughout the day where I suspected may have caused the problem.

  I went back to a restore point from the earlier in the day when I heard that Messenger was working. Of course, Messenger open instead of crashing on startup.

  Unfortunately, I am able to connect to the Internet. Network connections settings say it's "id" my wireless network, but nothing changes. Is no longer, I get an IP address. I have other computers on the network that connect without problem.

  I tried to install a Wireless N USB adapter and the problem still remains. Finally, I gave and did a complete restore to factory settings. Good news is that I can now get a connection. Fortunately, I had my backup files.

  Research online, it seems that many people seem to have had similar problems, but not after a system restore.

• Message after system restore

  Hello

  Before that I brought my computer - not that I tap on now - in a shop three weeks back, I did a system restore to this subject with two Windows 8 recovery disks. While the computer was that I heard bad things about the shop of my neighbours, which course is the repairman recovered data on his computer and put a virus on his desk. In any case, I'll be back the computer tonight and even if I did the factory restore before you import it in, I did another one with the same two tonight recovery disks. After the installation is complete, I decided to turn the computer off and continue the download of applications, etc., tomorrow, but it would not turn off:

  Instead, I got the following message and wonder what it means, especially if the same computer repairer could put a virus on my desk as he did my neighbor.

  He said that he could not close because it detected EXCEPTION UNKNOWN SOFTWARE and he gave the number according to 0xe0434352 saying that it occurred in the location 0x170389cc

  Anyone know what these numbers mean?  I now do another reset of my computer, but this time of the computer itself, not the recovery disks.

  How can I find out, once again, if a virus has been on the registry office, etc., while the computer is out of my care?

  Thank you

  Thanks for the information. I did another restore of factory and the machine booted correctly without these messages; However, I can make the safe mode boot / clean anyway. Never understood why go in safe mode allows, but will try.

  Thank you

• File missing after system restore

  Dear Sir.
  Today, on a tecra M2, I did a system restore, but suddenly, the message came that I had to re - install the following file: \system32\ntoskrnl.exe :

  How can I do this: put in the recovery cd or just make a formatting the drive with the restore cd?
  Thanks in advance
  drweekx

  Hello

  System Restore is a very useful tool, but it is not the miracle solution! :-)

  Your "ntoskrnl.exe" file seems to be corrupted and this file is very important as you BONE!
  You can try to start Notepad, and then press the key "F8". This will take you to a menu and you can choose the 'last known good configuration"and the VGA Mode.

  If you are lucky your laptop work after that, otherwise you can only recover the portable whole! But if you have important data on the NB you safe to an external drive!

  Goodbye Chris

• Cannot run some programs after system restore to remove the virus

  Hello

  Toshiba my duaghter had a nasty virus that pretends to be an antivirus software product, which sneaked in, between the time his default service Norton has expired and I had the time to install Trend.

  Can not remove it using trend, so on the advice of a friend, decided to make a windows system restore to a point before the infection. It worked successfully and the virus has disappeared, but now she can't run some programs, I tried to reinstall Trend, but fails because he says you must first uninstall Norton. But I can't run Norton, or uninstall, and certain folders on C: are no longer accessible.

  I have to do a full restore of the Toshiba System (IE back tofactory settings? This seems a drastic measure, but the issue is beyond my meager knowledge of PC.

  Thank you

  Graeme

  Hey Buddy,

  Hmm... This announcement is a bit confusing... Maybe the programs you want to say were installed after the system restore point, who knows?

  In my opinion you must reset the laptop configuration that you have already written. This will restore the pre-installed Windows version where everything is working correctly and that all the drivers and tools are installed.

  Therefore, you only need the Toshiba Recovery disk and boot from it. This will restore the factory settings.

  Check this box!