IPad recognizes the printer but stopped printing

Similar Questions

• HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

  I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

  Hi @lelg,

  I understand that you want to configure the printer on the wireless network. I can help you with this.

  Uninstall the printer software.

  Uninstalling the printer software.

  Restore the default settings of the printer.

  Go to Configuration, restore the default values.

  Cycle power to the router and the computer.

  Run the installer on the printer wireless.

  Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration report.

  Select the method.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

  If it loads the page from the network printer then the printer is on the network.

  Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Select your operating system, click Next and click on the software to download and install.

  Test the printer.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• Computer recognizes the printer, but does not install

  Original title: printer / driver problem

  My HP Officejet 5610 all in one printer just stopped working after 3 years.  I tried to reinstall the software disk... the error log will accomplish even his race.  I think I have a driver problem, but don't know how to fix it.  The computer recognizes the printer, but cannot complete the installation.

  Hello

  You did it of any material changes or software on the computer before this problem?

  You can follow this link completely and check if the problem persists.

  Printer in Windows problems

  Hope the helps of information.

  Please post back and we do know.

• MacBook Air no longer recognizes the printer wireless Epson WF-7620

  It worked well always. Recently, my MacBook Air (I have two with the same problem), the Ipad and the Iphone can not recognize the printer Epson WF - 7620 Airprint wireless.

  This medication is properly updated, and wifi is okay.

  If I connect it by USB, it works correctly.

  Thank you

  Check if the printer needs a firmware update

• How can I get Satellite P205D-S8804 to recognize the printer?

  Hello

  I have a Canon S200SPx printer usb and a Toshiba Satellite P205D-S8804 at the Vista and that you get computer to recognize the printer.

  I have already downloaded all the printer drivers for Vista and have USB printer and cable and led all connected, but still computer does not recognize the printer.

  Hello

  I have a USB printer too and my laptop would recognize the printer correctly.
  I had to install the drivers first!
  Then I connected the two devices (laptop & printer) and Windows Vista has reported that a new device has been recognized.
  After a short time the printer appears in the Device Manager

  Maybe you should check if you have installed all necessary drivers
  In addition to renew the USB in Device Manager
  You simply remove the hubs USB and controllers from the list of devices in Device Manager. Reboot the laptop one waiting until Vista recognizes the USB controllers and then install software printing and after new reboot connect the printer!

  The printer must be turned on then

• Put HP1012 in place. The installation process does not recognize the printer.

  I've made sure the device is on and the usb cable is connected.  Printer worked fine until I needed to reinstall the windows xp operating system.  Now reinstall the printer set up the software does not recognize the printer.  Before reinstalling the operating system, the printer worked great even if it is quite old.  I use the original CD game in the installation process.

  Problem solved.  I plugged the printer into different usb port cable and the computer immediately recognized the printer.  Previously, I had ports different usb, but not the one where he worked.  I have 7 usb ports on this computer, and it seems that one does not work.

• HP officejet 6600 my laptop does not recognize the printer

  My laptop does not recognize the printer any longer. It will recognize the fax on the printer but not the printer itself. Can you help me? I have two currencies on my laptop. HP officejet 6600 and hp officejet 6600 network. Even printing for both. One network is the fax. I'm not clear what is the question. I can't even download drivers or updates for it.

  There are two 6600's in the list, a fax and a printer, because the full feature software and drivers have drivers for both. If you do not use the fax, you can remove devices and printers.

  A work print from other sources? For example Notepad?

• Windows cannot recognize the printer after the print job is canceled

  When I installed my printer Epson XP - 410 on my laptop Windows 7, the installation of program established three identical icons in the box "Show hidden icons" system tray, a 'Epson XP-410 series named' and others adding "(Copy 1) and (copy 2) that." It was not critical until today when I ran in the paper and cancelled the print job. Now rather than see the icon for XP - 410 as before, Windows Live Photo Gallery is only to see the icon (copy 2) and the properties of the printer selection under print settings is looking for a printer that does not exist, say is not ready, showing without ink, etc..  Anyone know how I can get Windows to recognize the printer that is there instead of look for one that is not there? I tried to customize under Show hidden icons, but when I change the status of the any icons, they change all three at once. Any help would be so appreciated...

  Original title: duplicate icons in the box "Show hidden icons" in systray

  Hi Robert,.

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. What is the exact error message you get when you give the print command?
  2. You have related driver printer disks to install the printer?

  The question may arise if the package of printer from the printer model driver is either not installed correctly or has been corrupted.

  In order to diagnose and solve the problem, I would say, try the following methods and check if the problem persists.

  Method 1:

  Run the printer Troubleshooter and check if that helps. He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  Open the printer Troubleshooter

  If the problem persists, try the following method.

  Method 2:

  Try to uninstall and reinstall the last full have printer drivers and check if the problem persists.

  Step 1: Uninstall the printer drivers installed in the system

  • Open programs and features, click Start > Control Panel > programs and features.
  • Find and select Epson printer drivers in the list of programs.
  • Click Uninstall and follow the instructions on the screen.
  • Reboot your system.

  Step 2: Reinstall the printer drivers

  Reinstall the latest drivers at the following link that is compatible with Windows 7.

  Epson XP-410

  Additional information:

  Solve printer problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  Hi John - thank you for your response. For the benefit of someone else who has this problem, I was able to perform a miracle. Went to Start - devices and printers, found three printers instead of one year, removed the two copies and who has also removed the two unwanted icons in the systray. Now, everything's fine. Hope this helps someone.  Thank you, Christian...

• Apps do not recognize the printer

  OfficeJet 6000 wireless (out of warranty). Have reinstalled several times using the utility, the removal tool, etc. Installs as a composite USB device, with no printer icon. Can print test page, or a web page, but the apps (Word 13, PDF files, etc.) do not recognize the printer. This is a printer only, do not scan or fax. Set up to print directly from mobile, the wireless turned off and don't function not used. Any advice for the printing of the word? Thank you!

  Hi PM14.

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Sorry to hear that you are having problems with get the printer installed properly.  I see that you have tried to uninstall and reinstall several times without success.  Please respond with an operating system that you are running:
  Operating system Windows am I running?
  Mac OS X: how to find which Mac OS X Version is on my computer?

  Once I got the information I asked for, I can then research the issue in more detail.

  Thank you for your time and I look forward to hearing back on your part.

• My laptop recognizes the drive but does show that two files named "My Data Sources" and "Bootsect.

  original title: old Hard Drive Access

  I have recently had problems with my pc, I decided that I will buy a new Tower, but I really need to get some files off the old hard drive, I bought and pregnant for the SATA drive out of my old pc. I'm now trying to get the files on my old drive through my laptop. The laptop is running Vista. My laptop recognizes the drive but does show that two files named "My Data Sources" and "Bootsect. When looking at the properties it shows that the majority of the disc is full, only 30 gigs for free the 160 GB drive. I don't understand why I can't access to find one of my old files. Help, please!

  Hello

  ·          These files are encrypted?

  Step 1: Step 1: temporarily disable the security software and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-vist/disable-antivirus-software

  Note: Make sure to allow him to return so that your computer is protected.

  Step 2: Run a check disk.

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

• How can I fix iphone and ipad to recognize my printer air.  I t o disconnect the printer and wait for 30 seconds before reconnected and then they both recognize the printer

  How can I fix 6s iphone and ipad air when they do not recognize my printer air.  After unplugging the printer for 30 seconds, they can connect to the printer

  Hey robertafromnull,

  Thank you for using communities Support from Apple. We can see from your post that you are having problems with printing of your devices on a printer of Air and that it would be happy to provide advice to solve this problem.

  Let's start by going to the section called "If you can not print on your AirPrint printer" in this link here: Topic AirPrint. This should contribute to help you get started with you back to printing from your iPhone / iPad. Let us know if this can help, or if you encounter any problems.

  Kind regards.

• Vista recognizes the printer but does not load the drivers - error 0x000003eb

  Have even tried to load drivers generic, just to see if it works, no chance.  I have on other computers with XP Pro on them and they picked it up, drivers loaded and works very well, but Vista is a different game. Tried plugging USB and gives the same error. Add a printer recognizes it, but it does not load the drivers. I can type the IP address of the printer and use a little from there prints 3 pages of a point, two pages are all kinds of different characters, it waste paper.

  Microsoft has looked everywhere and they want me to pay for OS problems out there and I'm not a fact. Program there is the problem that they should back is no Vista how the wrong subject.

  Looks like you can have the wrong drivers or not everything you need (drivers, firmware and software) or you do not have the installation in the right order (some require that the printer is connected and on, others require it only and power off, and other required he be attached and powered at a point issue).  I suggest you go to the Xerox support page for your printerhttp://www.office.xerox.com/printers/color-printers/phaser-6250/sprt-enus.html and download everything you need for your printer and your version of Vista.  Then read the articles about how install and configure the printer (unlike many other devices, printers are not intuitive and are picky about the way in which they are installed and will not work if not done according to the instructions). If necessary, that it includes a toll-free technical support number where they may be able to guide you through the process, or at least make sure that you understand the conditions, steps and the order of the steps to do it right yourself.

  I checked on the error and this can mean many things for a great many printers - but I could not find any reference to your specific printer to help us.  It is said that it was a mistake than if you have enabled and UAC if off and then back on it would solve the problem - but that sounds not just for me.  You really need to discuss this with HP and I don't know that they will have you place and operate at any time.  I don't believe technical support is costly (there is no mention of this at all) - but if the fact of telephone support, information on the website is free and they have other means of contact which are free (but are not as effective as a telephone conversation).  If you do the research and read relevant articles, I am sure that you can do.  No, Vista makes it as easy as XP, but it can still be done.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP iPrint App for iPad sees the printer but not scanner

  My WiFi iPad has the HP iPrint app installed.

  I can see the (HP F4580, All In One) printer and printing, but the iPad app does not see the scanner (which is the same device).

  Clues?

  Thank you!

  Well Yes, the iPrint app is just that - for printing.  It does not analyze.

• Mac pro book recognizes the printer, but not the scanner on my Photosmart C4280 all-in-One.

  Buy a new mac book pro.  Apple Store has transferred all my apps from my old mac pro book to my new.  Now my new laptop does not recognize my scanner, but he acknowledges the of my Photosmart all-in-One printer.  What should I do? Thank you.

  Well Yes, that's the proof that you have old HP software out there.  Let the Snow Leopard to install Rosetta (it should do if you say its OK).

• Mac Book Pro recognizes the printer, but not the scanner on my Photosmart C4280 all-in-One.

  I asked this question last October and it was answered and everything worked perfectly.  Now, my computer says "no scanner is selected."  I was clicking on and clicked on "reset printer", now it doesn't even brings a touch of the scanner click on!  I tried to look back on the post of October 2010 who helped me before, but the solution had me uninstall the HP application and now it is no longer in my applications.  What should I do?  I don't know if I'm explaining this very well.

  Thank you.

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.