IPad won't charge or reset

Similar Questions

• Can I use the original iPad Air 2 charger to charge my iPhone 6 Plus? It shortens the life of the battery of the phone?

  Can I use the original iPad Air 2 charger to charge my iPhone 6 Plus? It shortens the life of the battery of the phone?

  Yes, you can. No, it won't. Apple sells this as compatible with the iPad and iPhone adapter.

  And the phone does a little faster than with the phone adapter.

• My pencil to the iPad will not charge.  What should I do?

  My pencil iPad suddenly stopped charging.  The connector of the lightning and the wall adapter successfully charge my iPad and my iPhone 6 but will not charge my pencil.  The green light on the pencil map is no longer lights up.  The pencil is about 7-8 months.

  Hello

  Check the ports on the adapter load load pencil Apple for debris.

  Also try to load your Apple pencil by plugging in the connector of the lightning on your iPad Pro. If the battery is exhausted, a second charge of 15 should provide 30 minutes of use.

  • Use the pencil to Apple with iPad Pro - Apple Support

  If the problem persists, contact Apple support (mail service may be available) or make a Genius Bar reservation in order to your Apple pencil and accessories checked power warranty:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

• My laptop is plugged in, but the battery won't charge

  Hello

  In the last two months, capability of my laptop to charge its battery has degraded.
  She went to a battery completely (100%), not being able to load beyond 98% and then 66% and 30%, and now finally, it says "0% availability (plugged in, charge)", but it never increases support.

  Thus, the laptop works when plugged into the charger, but does not illuminate when it is attached only on the battery.

  I rebooted the computer several times - first to stop the machine, then unplug it, remove the battery, press and hold the Start button for a minute, then put the battery back, plug the charger in and rebooting the machine.

  I installed updates for "Stacks" (IE. Microsoft AC adapter, compatible ACPI Microsoft control method battery and battery Composite Microsoft) in Device Manager.
  I also uninstalled the Microsoft ACPI complaint method stack and shutdown and restarted the laptop several times.

  Earlier I called Toshiba support and update the BIOS of 1.50 to 1.70, then restarted the computer, but yet again, the battery won't charge.

  I bought a new battery, which showed that it was fully charged when when I have attached to my laptop, but when exhausted 0% load, I got the same message as for the other battery: "0% availability (plugged in, load).

  I am really puzzled. If not, how can I try to increase the capacity of my laptop battery?

  In my opinion, old battery was certainly defective.
  Is your new original battery, Toshiba battery or any part of third-party product?

  When you start Notepad without battery and put in place when Windows is loaded does the problem persist?

• iPad stopped Pro charge & cannot connect to iTunes

  I don't know what happened during the night but my new iPad Pro stopped charging.  We see 0% long hours unplugged, when I plug in the charger has no display of love at first sight.  It's weird what it was 0% for long hours unplugged but still doesn't work.

  iTunes, when connected by USB cable, does not at all.  Looks like something is really bad past with this expensive equipment.  Only a month.  I bought at Costco and will return this defective iPad unless someone has something to revive.

  The cables are all authentic new Apple.

  Thank you.

  Honestly, even if we had something to revive I always return it. It is too new and that you paid too much for this kind of question in a new device.

• Satellite A30 PSA30E - battery won't charge

  Hello

  I have a Toshiba Satellite A30 laptop ((n° de pièce = PSA30E-00E5-FR) and recently when plugged in, the battery is not, in fact he tell Chargers.) When the laptop is turned off, if you plug the battery icon orange lights and charges of battery, but when you start the laptop to halfway through start orange icon battery turns off and the battery won't charge. If you start the laptop just using the battery once it is in place and ongoing enforcement if you plug the nothing happening for example the battery charge orange icon does not illuminate.

  The power is always on the laptop the screen stays on its setting of intensity, but the laptop turns off when the battery runs down to 0%.
  I removed the battery and tried power the laptop just using the power grid, but the laptop does not turn on.

  Any ideas what wrong?

  If it is the battery which batteries would be compatible with my laptop to replace and how do 2nd hand/battery cost these days for my laptop?

  My battery model number = PA3250U-1BRS
  K000002280

  I found a battery on a site that resembles a Toshiba Satellite A35 (don't remember if it's A30 or Pro A30) - looking at the Toshiba Satellite A35, it's the same as my Toshiba Satellite A30 it would be compatible?

  Thanks for your time...

  Hello

  Eventually it s a battery but problem is just a suggestion.
  I do not recommend buying a second hand battery because second hand battery will discharge a lot faster.
  In my opinion, you should buy a new one.

  I googled a little bit for PA3250U-1BRS and found a few deals online, it seems that you can get it for 50-60 euros

  Regarding the battery A35.
  I think that it should be compatible with your laptop. The A35 is a Toshiba US series (A30 is the European model) and it of very similar to A30.

• I stop my new laptop with Windows 7, install new updates. But now my laptop won't charge. There only dark blue screen. He won't even have to sign on the screen. Someone at - it happen?

  I stop my new laptop with Windows 7, install new updates.  But now my laptop won't charge.  There only dark blue screen.  He won't even have to sign on the screen.  Someone at - it happen?

  Hi ctgreen

  Welcome to the Microsoft Answers site!

  You can try the following and link methods under each method for more information on the same and see if one of them solve the problem.

  Method 1: Start the computer in last good known Configuration

   

  1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the button start , click the arrow next to the button lock , then click on restart.

  1. Do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start, and then press F8.

  1. In the Advanced Boot Options screen, use the arrow keys to select last good known Configuration and press ENTER.
  2. If your computer has multiple operating systems installed, use the arrow keys to select the operating system that you want to start using the last good known Configuration, and then press ENTER. Windows will then resume starting normally.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2: Start your computer in Mode safe

   

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click on the Start button , click the arrow next to the lock button , and then click restart.

  2. do one of the following:

  o If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  o If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode and press F8.

  3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  When your computer is in safe mode, you'll see the words Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are able to access the desktop in SafeMode I suggest you read the article in the link below for instructions on restoring the system.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Concerning

  Varun j: MICROSOFT SUPPORT

  Visit our Microsoft answers feedback Forum

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

• HP dv6000 pivillion. battery won't charge

  When I plug my adapter in my computer, the ac plug light but the light on the front of my computer does not light and I put 2 different batteries in it and both are dead and won't charge.

  glenna28 wrote:
  No, but the Middle blinks 3 times I think it's the light battery.

  Since you mentioned with the right replacement it is not yet getting started and saw that this is a DV6xxxx if my memory serves me right, these units had a GPU failure rate that would be more or less lead a cell phone dead. And you only choice at the moment is to repair defective GPU or new Board fixed GPU problem or the most recent purchase of a laptop that does not have those defective GPU that has been on these boards.

• Unable to determine the type of AC power adapter. Your system will run more slowly and the battery won't charge.

  I get the error message is: AC power adapter type cannot be determined. Your system will run more slowly and the battery won't charge.

  Hello
  (1) when you receive this error message?
  (2) what is the brand and model of your computer?
  (3) did you change on your computer before this problem?
  It seems that the adapter has gone wrong, I suggest you to connect another card and see if the problem still occurs.
  You can also contact the computer manufacturer for assistance on this issue.

• Their battery: battery won't charge

  I just got this computer 3 months ago, that it is a DELL laptop this morning, everything was good and when I went to load it in the evening, the battery won't charge. Sighn the card shows that his office do not. How do I HELP! And can I still use my computer during his same pluged so his load not?

  Hello

  Don't forget to turn off the computer - remove the a/c power - then remove the battery
  and check to see if any corrosion on the contacts. If so try to clean
  with a pencil eraser. Check with Dell Support and Forums for methods more.

  Check with Support from Dell, their online documentation, diagnostics, drivers, and ask
  Dell forums about known issues. Some manufacturer issued BIOS and other updates
  for help with battery problems.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  -----------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have online forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Taking care of your laptop battery
  http://Windows.Microsoft.com/en-us/Windows7/taking-care-of-your-laptop-battery

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have PSE 13, my text is uppercase, and it won't let me reset tool.

  I have PSE 13, my text is uppercase, and it won't let me reset tool. Can anyone help? I'm a beginner at this so I don't know if I'm missing something

  With locking caps will do that, but it is unlikely that the problem since your post is not all uppercase here on the forum.

  In the editor of PES 13 in Expert mode with the type tool selected, you can click on the tool Options at the bottom of the window 13 pse, click on the highlighted area in the screenshot below and then click on the reset tool.

  

  If this does not work, then the next step is to reset the 13 PES editor preferences.

  In the PES editor 13 go to the Photoshop elements editor (mac) or Edit (windows) Preferences > General, click reset on the next launch preferences and restart the editor PES 13

  

• iPad 2 Mini won't charge and turn on

  I have a problem of my retina iPad Mini 2, it won't load up one night, that's why can depend on at all. do not have have a number before, do not let it fall or water damage at all. a lot of this model apparently have problem all over the world, asking Apple should have a reminder or what? Any help?

  Thank you

  Have you tried a soft-reset/reboot to see if that gets it to start? Press and hold the home button and sleep for about 10 to 15 seconds, then the Apple logo will appear if all is well and it will start.

• iPad2 IOS 9 update... battery won't charge!

  Hello

  I have a nice iPad 2 that I use every day.  I am a retired hardware/software engineer.  My iPad still costs to 100% and lasts all day and so for the past 2 years.  Last night I updated to IOS 9 and when you are finished touch was noisy on the left edge of the screen and the display went a little irrattic.  I fixed to the my PowerBook and saved.  I then reset and everyhing seemed normal.  This morning, he showed a low percentage of charge after being on the charger overnight.  He went to a couple of bars and stop.  It detects the charger when I plug, but it will not charge the battery.  I tried three well-known cables and two chargers as well as the USB Port of my PowerBook.

  What do you think I should do?  Nothing you can say will make be believe it is not related to the IOS 9 update and if there is a path to the regression, please give me a hint.  I can't understand why he refused also to run as a unit while it is powered via the USB Port on the PowerBook.  I think I created a cutting board very expensive by the update of IOS.  US Government claims my lifestyle on social security not commit higher expenses this year so I won't be able to afford another iPad 2 for some time.  What would Steve?

  Sincerely,

  Robert L * Lacey, Wa

  **************.com

  < coordinates and Email published by host >

  It is possible after two years, the battery should be replaced.

  You can start an application for service here > https://www.apple.com/support/ipad/repair/battery-power/

• What should I do? Sells iPad factory, new owner says reset access code is defined?

  Hello world

  I sold an iPad 2 on Ebay (Jan 10) last month and it shipped overnight to get 12. The iPad was released factory suiteApple 'what to do before you sell or give away your iPhone, iPad or iPod touch' instructions. The iPad has been previously bought nine of the store and has never been sold or whatever it is. The Ebay buyer was an account with zero return.

  February 17 (38 days later) the new owner sent me by saying that the iPad had a password on it. He claims that it is still in the initial Setup screen, quote "after the Hello message in 4 languages, a window pops up that says...". Enter code iPad requires your password after restart. »

  
  

  Note that the iPad is not locked to one Apple ID (I checked the iCloud account and it's certainly not there). The error is only to ask the password - but the iPad was factory reset and installation has not been completed, which means that there should not be an access code. (I would like to focus on the resolution of the problem, but as far as I can see, there are two possibilities - someone went to halfway in the process configuration and set a password, or leave the iPad in Setup for more than one month has caused something to go wrong).

  I searched and found this relevant issue: "I got locked out from my mini iPad during installation, keep me for password but I did not stay in a place" the solution he had to erase the device with the recovery mode. I sent this link to the buyer. It is a simple process that should only take a few minutes. He said he tried and it doesn't work. He won't say exactly where it breaks down or what error. I suggested he ask for help from someone who knows more about computers or it takes the iPad at the Apple store to reset them, but he says will not help Apple Store, the store nearest is 30 minutes and there is no time.

  He says now that he wants me to give him my credit card details so that it can charge my card for a messaging service pick up the iPad. The purchase price was 137,99 £ + £11 shipping. I've already paid the fees of £14,89. He seems to expect a full refund, including pay me again for return shipping and pay me Ebay fees will not be refunded. Of course, in this scenario, I end up losing a little money.

  So, questions:

  • An Apple store will erase the iPad? (I have been informed that they will be, but the buyer claims also. The Appleinstructions seem pretty clear that they have indeed will be, quote: "If you don't have a computer, borrow one from a friend, or to an Apple Store or service provider registered Apple.")
  • Given that he is out of the period of 30 days for returns of Ebay, is it possible to recover Ebay fees, if I accepted the return? I wouldn't mind him repay something just to get it, but it would be stupid to lose 1/3 of the value of the tax sale and delivery.
  • What can I do else? I really want to solve this problem, but my options are limited, when it cannot reset the password itself, is not going to the Apple store for the help and feedback from Ebay date limit is passed.

  Thanks for all the advice and sorry for the long post (just wanted to just include all the details). I'll share this discussion with the buyer, and he is free to comment if he wishes.

  Looks like you provided the buyer with all the advice we would give here. If they are unable to follow the instructions to clear the password lock screen and are 'too busy' to consider at the Apple Store to get help, I don't really see how you are responsible for this. Why he has waited more than a month to put in place even though they knew they had a day 30 back window? Why is he not come on why the instructions that you send it to get the matter resolved "does not work"? This kind of problem is solved per day on this site. But when someone tells us that they "can't" do something and will not provide exactly the problem they face, we cannot do anything more for them.

  So, from the point of view troubleshooting, the buyer has the opportunity to provide you with more information, so you can help, or take the time to go to the Apple Store to get help. If the device is not locked activation, which it wouldn't since you followed the instructions on what to do before you sell it, then the question is operator error. There is nothing wrong with the device. The only question is to reset and do put in place.

  I don't see how we can all do more for someone who is not willing to work with you, or who's not ready get a form to help someone who understands what they are doing (because it is clearly not).

  Good luck

  GB

• My iPhone 6 won't charge for a very long time

  I, I noticed that my iPhone 6 won't stay not charged. It uses the battery charge more that there never. The phone went through a full reload during the night. Anyone know what could be causing this and what I can do to fix this?  Where can I go if I have a new battery, due to the fact that I am not near a store Apple. My phone is yepars only two old.

  I think that the visit of the Apple Store is the best option. Specialists Apple will surely help you.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  Here you will find some useful tips on how to make the life of your device's battery more long. They work for 8 and 9 IOS iOS.

  http://www.IMore.com/battery-life-problems-iOS-9-heres-fix

  https://www.Apple.com/batteries/maximizing-performance/

  sues-iPhone-iPad-and-iPod-422229 http://www.idigitaltimes.com/iOS-82-Battery-Life-Problems-How-Fix-Quick-drain-is

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/